Prevention of peritoneal adhesions using polymeric rheological blends.

The effectiveness of rheological blends of high molecular weight hyaluronic acid (HA) and low molecular weight hydroxypropyl methylcellulose (HPMC) in the prevention of peritoneal adhesions post-surgery is demonstrated. The physical mixture of the two carbohydrates increased the dwell time in the peritoneum while significantly improving the injectability of the polymer compared with HA alone. HA-HPMC treatment decreased the total adhesion area by ∼ 70% relative to a saline control or no treatment in a repeated cecal injury model in the rabbit. No significant cytotoxicity and minimal inflammation were associated with the blend. Furthermore, no chemical or physical processing was required prior to their use beyond simple mixing.

Biodegradable xylitol-based elastomers: in vivo behavior and biocompatibility.

Biodegradable elastomers based on polycondensation reactions of xylitol with sebacic acid, referred to as poly(xylitol sebacate) (PXS) elastomers have recently been developed. We describe the in vivo behavior of PXS elastomers. Four PXS elastomers were synthesized, characterized, and compared with poly(L-lactic-co-glycolic acid) (PLGA). PXS elastomers displayed a high level of structural integrity and form stability during degradation. The in vivo half-life ranged from approximately 3 to 52 weeks. PXS elastomers exhibited increased biocompatibility compared with PLGA implants.

Biocompatibility of biodegradable semiconducting melanin films for nerve tissue engineering.

The advancement of tissue engineering is contingent upon the development and implementation of advanced biomaterials. Conductive polymers have demonstrated potential for use as a medium for electrical stimulation, which has shown to be beneficial in many regenerative medicine strategies including neural and cardiac tissue engineering. Melanins are naturally occurring pigments that have previously been shown to exhibit unique electrical properties. This study evaluates the potential use of melanin films as a semiconducting material for tissue engineering applications. Melanin thin films were produced by solution processing and the physical properties were characterized. Films were molecularly smooth with a roughness (R(ms)) of 0.341 nm and a conductivity of 7.00+/-1.10 x 10(-5)S cm(-1) in the hydrated state. In vitro biocompatibility was evaluated by Schwann cell attachment and growth as well as neurite extension in PC12 cells. In vivo histology was evaluated by examining the biomaterial-tissue response of melanin implants placed in close proximity to peripheral nerve tissue. Melanin thin films enhanced Schwann cell growth and neurite extension compared to collagen films in vitro. Melanin films induced an inflammation response that was comparable to silicone implants in vivo. Furthermore, melanin implants were significantly resorbed after 8 weeks. These results suggest that solution-processed melanin thin films have the potential for use as a biodegradable semiconducting biomaterial for use in tissue engineering applications.

In vitro and in vivo degradation of poly(1,3-diamino-2-hydroxypropane-co-polyol sebacate) elastomers.

Biomaterials with a wide range of tunable properties are desirable for application-specific purposes. We have previously developed a class of elastomeric poly(ester amides) based on the amine alcohol 1,3-diamino-2-hydroxypropane termed poly(1,3-diamino-2-hydroxypropane-co-polyol sebacate) or APS. In this work, we have synthesized and characterized formulations of APS polymers and studied the degradation of these polymers in vitro and in vivo. It was found that the chemical, physical, and mechanical properties of APS polymers could be tuned by adjusting monomer feed ratios and polymerization conditions. The degradation kinetics could also be greatly influenced by altering the formulation of APS polymers. In vivo degradation half-lives ranged from 6 to approximately 100 weeks. Furthermore, the dominant degradation mechanism (i.e. hydrolytic or enzymatic) could be controlled by adjusting the specific formulation of the APS polymer. On the basis of the observed in vitro and in vivo biodegradation phenomena, we also propose that the primary modes of degradation are composition dependent.

Biodegradable poly(polyol sebacate) polymers.

We have developed a family of synthetic biodegradable polymers that are composed of structural units endogenous to the human metabolism, designated poly(polyol sebacate) (PPS) polymers. Material properties of PPS polymers can be tuned by altering the polyol monomer and reacting stiochiometric ratio of sebacic acid. These thermoset networks exhibited tensile Young's moduli ranging from 0.37+/-0.08 to 378+/-33 MPa with maximum elongations at break from 10.90+/-1.37% to 205.16+/-55.76%, and glass transition temperatures ranging from approximately 7-46 degrees C. In vitro degradation under physiological conditions was slower than in vivo degradation rates observed for some PPS polymers. PPS polymers demonstrated similar in vitro and in vivo biocompatibility compared to poly(L-lactic-co-glycolic acid) (PLGA).

Amino alcohol-based degradable poly(ester amide) elastomers.

Currently available synthetic biodegradable elastomers are primarily composed of crosslinked aliphatic polyesters, which suffer from deficiencies including (1) high crosslink densities, which results in exceedingly high stiffness, (2) rapid degradation upon implantation, or (3) limited chemical moieties for chemical modification. Herein, we have developed poly(1,3-diamino-2-hydroxypropane-co-polyol sebacate)s, a new class of synthetic, biodegradable elastomeric poly(ester amide)s composed of crosslinked networks based on an amino alcohol. These crosslinked networks feature tensile Young's modulus on the order of 1MPa and reversable elongations up to 92%. These polymers exhibit in vitro and in vivo biocompatibility. These polymers have projected degradation half-lives up to 20 months in vivo.

Synthesis and characterization of photocurable elastomers from poly(glycerol-co-sebacate).

Elastomeric networks are increasingly being investigated for a variety of biomedical applications including drug delivery and tissue engineering. However, in some cases, their preparation requires the use of harsh processing conditions (e.g., high temperature), which limits their biomedical application. Herein, we demonstrate the ability to form elastomeric networks from poly(glycerol-co-sebacate) acrylate (PGSA) under mild conditions while preserving a wide range of physical properties. These networks presented a Young's modulus between 0.05 and 1.38 MPa, an ultimate strength from 0.05 to 0.50 Mpa, and elongation at break between 42% and 189% strain, by varying the degree of acrylation (DA) of PGSA. The in vitro enzymatic and hydrolytic degradation of the polymer networks was dependent on the DA. The copolymerization of poly(ethylene glycol) diacrylate with PGSA allowed for an additional control of mechanical properties and swelling ratios in an aqueous environment, as well as enzymatic and hydrolytic degradation. Photocured PGSA networks demonstrated in vitro biocompatibility as judged by sufficient human primary cell adherence and subsequent proliferation into a confluent monolayer. These photocurable degradable elastomers could have potential application for the encapsulation of temperature-sensitive factors and cells for tissue engineering.

A porous photocurable elastomer for cell encapsulation and culture.

Encapsulating cells within a polymer matrix creates a three-dimensional (3D) scaffold that may more accurately represent the native microenvironment and cell organization. Here we report a porous scaffold prepared from a photocurable elastomer, poly(glycerolco-sebacate)-acrylate (PGSA). The scaffold porosity, swelling, mass loss, toxicity and mechanical properties, suggest that porous PGSA could be used to support the growth and differentiation of encapsulated cells. Neuroblastoma (NB) and human embryonic stem cells (hESCs) were encapsulated into the matrix and found to adhere to the material and interact with each other within 24h. After 7 days, encapsulated NB cells were found to grow, and form matrix fibrils and tissue. Undifferentiated hESCs proliferated and differentiated in the PGSA scaffold. In vivo experiments showed that both porous scaffolds have similar biocompatibility profiles as non-porous PGSA, but porous PGSA promotes tissue ingrowth, as compared to non-porous PGSA. We therefore propose that porous PGSA scaffolds can provide a logistical template for 3D growth of cells and tissue engineering.

Expression of CD45RB functionally distinguishes intestinal T lymphocytes in inflammatory bowel disease.

The importance of CD45RB expression on T cells was already shown in mice where CD45RB(high) expression determines pathogenic potential. In this study, we analyzed the expression of CD45RA, CD45RB, and CD45RO on CD4(+) T lymphocytes in the intestinal mucosa and in the circulation of patients with inflammatory bowel disease (IBD). In addition, we studied the cytokine profile of these cells. In the circulation, virtually all CD4(+)CD45RB(high) T cells expressed the naive marker CD45RA, and circulating CD4(+)CD45RB(low) cells expressed the memory marker CD45RO in IBD patients and a control patient population. In contrast, the intestinal CD4(+) CD45RB(high) T cells are in normal controls for 90% CD45RO(+). However, in IBD, 27.7% [Crohn's disease (CD)] and 49% [ulcerative colitis (UC)] of the intestinal CD4(+) CD45RB(high) T cells are CD45RA(+). This special CD4CD45RA(+) T cell in IBD can be found in the lamina propria as well as in lymphoid follicles (confocal laser-scanning microscopy). The CD4(+)CD45RB(high) T lymphocytes produce significantly less interleukin (IL)-10 and IL-4 and produce more tumor necrosis factor alpha than CD45RB(low) T lymphocytes in control patients. CD4(+)CD45RB(low) T cells from IBD patients produced less IL-10 than CD4(+)CD45RB(low) T lymphocytes of controls, and interferon-gamma production by both T lymphocyte subsets was decreased in IBD. These data indicate that CD and UC are characterized by an influx of CD4(+)CD45RB(high) T lymphocytes. These CD4(+)CD45RB(high) T lymphocytes seem to be important in the pathogenesis of IBD, as they produce more proinflammatory cytokines and less anti-inflammatory cytokines compared with CD4(+)CD45RB(low) T lymphocytes.

The role of SAP in murine CD150 (SLAM)-mediated T-cell proliferation and interferon gamma production.

CD150 (signaling lymphocyte activation molecule [SLAM]) is a self-ligand cell surface glycoprotein expressed on T cells, B cells, macrophages, and dendritic cells. To further explore the role of CD150 signaling in costimulation and T(H)1 priming we have generated a panel of rat antimouse CD150 monoclonal antibodies. CD150 cell surface expression is up-regulated with rapid kinetics in activated T cells and lipopolysaccharide/interferon gamma (IFN-gamma)-activated macrophages. Anti-CD150 triggering induces strong costimulation of T cells triggered through CD3. DNA synthesis of murine T cells induced by anti-CD150 is not dependent on SLAM-associated protein (SAP, SH2D1A), because anti-CD150 induces similar levels of DNA synthesis in SAP(-/-) T cells. Antibodies to CD150 also enhance IFN-gamma production both in wild-type and SAP(-/-) T cells during primary stimulation. The level of IFN-gamma production is higher in SAP(-/-) T cells than in wild-type T cells. Anti-CD150 antibodies also synergize with interleukin 12 (IL-12) treatment in up-regulation of IL-12 receptor beta(2) mRNA during T(H)1 priming, and inhibit primary T(H)2 polarization in an IFN-gamma-dependent fashion. Cross-linking CD150 on CD4 T cells induces rapid serine phosphorylation of Akt/PKB. We speculate that this is an important pathway contributing to CD150-mediated T-cell proliferation.