Polymer coatings based on sulfonated-poly-ether-ether-ketone films for implant dentistry applications.

Poly-ether-ether-ketone (PEEK) is one of the most important biocompatible polymers and its sulfonation has been studied for biomedical applications. The aim of the present study is to produce, to characterize and to assess bioactivity of PEEK coatings with sulfonated PEEK (SPEEK) films. Biomedical grade PEEK (Invibio®, Batch: D0602, grade: NI1) was functionalized using sulfuric acid 98%. SPEEK was dissolved into DMSO or into DMF, both at 10% mass/volume. PEEK bars (N = 18) and cylinders (N = 27) were manufactured by compression molding and heating. SPEEK/DMSO and SPEEK/DMF were drop casted at PEEK bars and dip coated at PEEK cylinders (PEEK + SPEEK/DMSO and PEEK + SPEEK/DMF). Characterization was performed through Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and contact angle measurements. Bioactivity was assessed by immersion of samples at SBF for 1, 7 and 21 days, followed by SEM, energy-dispersive analysis (EDX) and FTIR analysis. Statistical analysis was carried out by one-way analysis of variance (ANOVA) (p = 0.05). Characteristic bands of PEEK and SPEEK, were identified through FTIR spectrum analysis, while semicrystallinity was confirmed by XRD. PEEK + SPEEK/DMF showed more evident physicochemical modifications. PEEK + SPEEK/DMSO provided a more regular and hydrophobic surface, observed through SEM and contact angle measurements. SEM/EDX showed that precipitates of calcium were formed at PEEK + SPEEK/DMSO and PEEK + SPEEK/DMF at all experimental times, but materials were not considered bioactive. Interesting surface properties were achieved with SPEEK coatings but the production of SPEEK films at PEEK surface has to be further improved and biologically tested. Schematic diagram showing the methodology applied in this study to prepare PEEK and SPEEK samples, as well as the promising application of the material.

Effect of Surface Treatment, Silane, and Universal Adhesive on Microshear Bond Strength of Nanofilled Composite Repairs.

PURPOSE: The aim of this study was to evaluate the effect of surface treatment and universal adhesive on the microshear bond strength of nanoparticle composite repairs. METHODS: One hundred and forty-four specimens were built with a nanofilled composite (Filtek Supreme Ultra, 3M ESPE). The surfaces of all the specimens were polished with SiC paper and stored in distilled water at 37°C for 14 days. Half of the specimens were then air abraded with Al2O3 particles and cleaned with phosphoric acid. Polished specimens (P) and polished and air-abraded specimens (A), respectively, were randomly divided into two sets of six groups (n=12) according to the following treatments: hydrophobic adhesive only (PH and AH, respectively), silane and hydrophobic adhesive (PCH, ACH), methacryloyloxydecyl dihydrogen phosphate (MDP)-containing silane and hydrophobic adhesive (PMH, AMH), universal adhesive only (PU, AU), silane and universal adhesive (PCU, ACU), and MDP-containing silane and universal adhesive (PMU, AMU). A cylinder with the same composite resin (1.1-mm diameter) was bonded to the treated surfaces to simulate the repair. After 48 hours, the specimens were subjected to microshear testing in a universal testing machine. The failure area was analyzed under an optical microscope at 50× magnification to identify the failure type, and the data were analyzed by three-way analysis of variance and the Games-Howell test (α=0.05). RESULTS: The variables "surface treatment" and "adhesive" showed statistically significant differences for p<0.05. The highest mean shear bond strength was found in the ACU group but was not statistically different from the means for the other air-abraded groups except AH. All the polished groups except PU showed statistically significant differences compared with the air-abraded groups. The PU group had the highest mean among the polished groups. Cohesive failure was the most frequent failure mode in the air-abraded specimens, while mixed failure was the most common mode in the polished specimens. CONCLUSIONS: While air abrasion with Al2O3 particles increased the repair bond strength of the nanoparticle composite, the use of MDP-containing silane did not lead to a statistically significant increase in bond strength. Silane-containing universal adhesive on its own was as effective as any combination of silane and adhesive, particularly when applied on air-abraded surfaces.

Microscopy outperformed in a comparison of five methods for detecting Trichomonas vaginalis in symptomatic women.

In the UK, despite its low sensitivity, wet mount microscopy is often the only method of detecting Trichomonas vaginalis infection. A study was conducted in symptomatic women to compare the performance of five methods for detecting T. vaginalis: an in-house polymerase chain reaction (PCR); Aptima T. vaginalis kit; OSOM ®Trichomonas Rapid Test; culture and microscopy. Symptomatic women underwent routine testing; microscopy and further swabs were taken for molecular testing, OSOM and culture. A true positive was defined as a sample that was positive for T. vaginalis by two or more different methods. Two hundred and forty-six women were recruited: 24 patients were positive for T. vaginalis by two or more different methods. Of these 24 patients, 21 patients were detected by real-time PCR (sensitivity 88%); 22 patients were detected by the Aptima T. vaginalis kit (sensitivity 92%); 22 patients were detected by OSOM (sensitivity 92%); nine were detected by wet mount microscopy (sensitivity 38%); and 21 were detected by culture (sensitivity 88%). Two patients were positive by just one method and were not considered true positives. All the other detection methods had a sensitivity to detect T. vaginalis that was significantly greater than wet mount microscopy, highlighting the number of cases that are routinely missed even in symptomatic women if microscopy is the only diagnostic method available.

Coronary computed tomography angiography for the evaluation of patients with acute chest pain.

Acute chest pain is a common presenting complaint of patients attending emergency room departments. Despite this, it can often be challenging to completely exclude a diagnosis of acute coronary syndrome following an initial standard clinical and biochemical evaluation. As a result of this, patients are often admitted to hospital until the treating clinician is satisfied that this diagnosis can be excluded. This process imparts a significant health economic burden by not only increasing hospital bed occupancy rates but also by the unnecessary layering of diagnostic investigations. With the rapid advances in coronary computed tomography angiography (CTA), there has been considerable interest in whether coronary CTA may be a viable alternative to this current standard care. We review the current literature and supporting evidence for utilising coronary CTA in the evaluation of patients presenting with acute chest pain in terms of its diagnostic accuracy, safety, cost-effectiveness and prognostic implications.

The influence of surface standardization of lithium disilicate glass ceramic on bond strength to a dual resin cement.

In vitro studies to assess bond strength between resins and ceramics have used surfaces that have been ground flat to ensure standardization; however, in patients, ceramic surfaces are irregular. The effect of a polished and unpolished ceramic on bond strength needs to be investigated. Sixty ceramic specimens (20×5×2 mm) were made and divided into two groups. One group was ground with 220- to 2000-grit wet silicon carbide paper and polished with 3-, 1-, and »-µm diamond paste; the other group was neither ground nor polished. Each group was divided into three subgroups: treated polished controls (PC) and untreated unpolished controls (UPC), polished (PE) and unpolished specimens (UPE) etched with hydrofluoric acid, and polished (PS) and unpolished specimens (UPS) sandblasted with alumina. Resin cement cylinders were built over each specimen. Shear bond strength was measured, and the fractured site was analyzed. Analysis of variance (ANOVA) and Tukey post hoc tests were performed. PE (44.47 ± 5.91 MPa) and UPE (39.70 ± 5.46 MPa) had the highest mean bond strength. PS (31.05 ± 8.81 MPa), UPC (29.11 ± 8.11 MPa), and UPS (26.41 ± 7.31 MPa) were statistically similar, and PC (24.96 ± 8.17 MPa) was the lowest. Hydrofluoric acid provides the highest bond strength regardless of whether the surface is polished or not.

Antimycobacterial activity of lichen substances.

We describe here the extraction and identification of several classes of phenolic compounds from the lichens Parmotrema dilatatum (Vain.) Hale, Parmotrema tinctorum (Nyl.) Hale, Pseudoparmelia sphaerospora (Nyl.) Hale and Usnea subcavata (Motyka) and determined their anti-tubercular activity. The depsides (atranorin, diffractaic and lecanoric acids), depsidones (protocetraric, salazinic, hypostictic and norstictic acids), xanthones (lichexanthone and secalonic acid), and usnic acid, as well seven orsellinic acid esters, five salazinic acid 8',9'-O-alkyl derivatives and four lichexanthone derivatives, were evaluated for their activity against Mycobacterium tuberculosis. Diffractaic acid was the most active compound (MIC value 15.6mug/ml, 41.6 microM), followed by norstictic acid (MIC value 62.5 microg/ml, 168 microM) and usnic acid (MIC value 62.5 microg/ml, 182 microM). Hypostictic acid (MIC value 94.0 microg/ml, 251 microM) and protocetraric acid (MIC value 125 microg/ml, 334 microM) showed moderate inhibitory activity. The other compounds showed lower inhibitory activity on the growth of M. tuberculosis, varying from MIC values of 250 to 1370 microM.

Antibacterial activity and phytochemical analysis of Vochysia divergens (Vochysiaceae).

Vochysia divergens Pohl (Vochysiaceae) is a tree commonly found in wet soils of 'Pantanal' of Mato Grosso, Brazil, and used in folk medicine against infections and asthma. We have studied different extracts and some isolated compounds from this plant for antibacterial activity. From the extracts of the stem bark beta-sitosterol, betulinic acid and sericic acid were isolated. The minimal inhibitory concentration (MIC) for Staphylococcus aureus were: ethanolic extract (MIC = 1.5 mg/ml); ethyl acetate extract (MIC = 2.0 mg/ml); and sericic acid (MIC = 1.0 mg/ml). Escherichia coli was resistant until 5 mg/ml.

The relaxant action of jatrophone in rat portal vein. A comparison with protein kinase C inhibitors.

Jatrophone, staurosporine and H-7, caused graded inhibition of rat portal vein contractions induced by phorbol 12-myristate 13-acetate (PMA), noradrenaline, endothelin-1 or KCl, with IC50s of 86 nM, 13 microM, 11 microM and 9 microM, respectively. Jatrophone was equipotent to H-7, but 100 to 500 fold less potent than staurosporine. Jatrophone, H-7 and staurosporine, also dose-dependently inhibited rhythmic contractions of the rat portal-mesenteric vein with IC50s of 15 microM, 9 microM and 75 nM, respectively. Jatrophone, H-7 and staurosporine caused graded relaxations of preparations contracted with endothelin-1 or PMA with IC50s of 12 and > 1000 microM, 8 and 13 microM and 7 and 12 nM, respectively. All three compounds caused graded inhibition of caffeine-induced contractions in Ca(2+)-free solution containing EGTA. The similarity between the vasorelaxant actions of jatrophone, staurosporine and H-7 in rat portal vein suggests that jatrophone acts, at least in part, through inhibition of PKC-dependent mechanisms. Moreover, like the PKC inhibitors, its vasorelaxant action may also involve other mechanisms unrelated to protein kinase C inhibition.

Action of pregnane compounds from Mandevilla illustris against contractions induced by kinins and other oxytocics in the rat isolated uterus.

1. The effects of 5 pregnane compounds isolated from the rhizomes of Mandevilla illustris were examined against bradykinin (BK), Lysyl-bradykinin (L-BK), acetylcholine (ACh) and oxytocin (Ot)-induced contractions in the isolated uteri of the rat. 2. Compounds MI 15 and MI 18 (5-40 micrograms/ml) caused a parallel and concentration-dependent rightward displacement of BK and L-BK concentration-response curves. Compound MI 21 (2.5-10 micrograms/ml) also produced a concentration-dependent displacement to the right of the BK concentration-response curve, but reduced its maximal response. Schild analysis of these data were linear (r close to 1) and furnished the following PA2 values (as G/ml): 6.0, 5.1 and 5.9, respectively. However, the slopes were significantly higher than unity. Compounds MI 25 and MI 27 (10-40 micrograms/ml) caused little or even no effect against BK and ACh responses. 3. In addition, compounds MI 18 and MI 21 (10-40 micrograms/ml) also antagonized in a concentration-dependent manner L-BK concentration-response curves. Schild plot were linear (r close to 1) and yielded the nominal pA2 values (as G/ml) of 5.0 and 5.8, respectively, but the slopes were significantly different from one. 4. Like the results obtained previously with the crude extract from M. illustris, the purified compounds from the rhizome of this plant were not selective towards kinin action since at the same range concentrations they markedly interfered with both the sensitivities and the maximal responses caused by ACh and Ot in this preparation.