Characterization of dental light-curing resin composites incorporating multiple modified low-shrink monomers.

OBJECTIVE: Polymerization shrinkage poses a significant challenge in dental resin composites. The objective of this study is to introduce spiroorthocarbonate monomer 3,9-dimethylene-1,3,5,7-tetraoxa-spiro[5,5]undecane (BMSOC) and epoxy resin monomer 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate (ECHM-ECHC) into bisphenol-S-bis(3-methacrylato-2-hydroxy propyl)ether (BisS-GMA) based resin composites to develop composites with reduced shrinkage properties. METHODS: BMSOC and BisS-GMA were synthesized and thoroughly mixed with ECHM-ECHC, followed by inorganic fillers and photoinitiators. Based on the composition of the resin matrix, five groups of experimental composites were prepared, with traditional bisphenol A-dimethacrylate glycidyl ester (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) based composite serving as the control. The polymerization properties, including degree of conversion (DC) and polymerization shrinkage (PS), as well as marginal microleakage, wettability, flexural strength (FS), flexural modulus (FM), and biocompatibility were evaluated. RESULTS: The results demonstrated that compared with the control group, the PS of BisS-GMA based composites containing BMSOC and ECHM-ECHC were significantly reduced (P < 0.05), and the lowest PS (0.96 ± 0.08 %) was observed when the ratio of BisS-GMA: (Epoxy + BMSOC) was 4:6. Additionally, the experimental composites also exhibited improved DC, minimal microleakage, low hydrophilicity, enhanced mechanical properties, qualified in vivo biocompatibility, and slight/moderate in vitro biocompatibility. SIGNIFICANCE: The resin composites incorporating multiple modified low-shrink monomers are promising for dental applications to prevent various clinical problems caused by PS and extend restoration longevity.

Resolve and dissolve-An ultrasound-guided investigation on the effects of hyaluronidase on different soft tissue fillers.

BACKGROUND: Nonsurgical cosmetic procedures, particularly the use of hyaluronic acid (HA)-based soft tissue fillers, are becoming increasingly popular. This trend has catalyzed the development of a plethora of HA-based products differing in product characteristics, thereby catering to an ever-widening spectrum of aesthetic applications. However, complications rise concomitant with the increasing number of procedures. Among the strategies to manage such adverse events is the enzymatic breakdown with hyaluronidase. OBJECTIVE: To analyze the response of different HA-based soft tissue filler materials to hyaluronidase injections. METHODS: A total of 11 different HA-based soft tissue fillers were evaluated using noninvasive ultrasound imaging to assess their behavior in response to hyaluronidase injections. The HA-based soft tissue fillers were categorized according to their product characteristics into a structuring, volumizing, and lip volumizing group. Standardized injections of 0.2 cc were performed in chicken breast to simulate human tissue. Ultrasound measurements of width, height, and calculated volume were performed immediately after filler injection, 1 h and 24 h following hyaluronidase injection. RESULTS: Regardless of the soft tissue filler analyzed, the most significant volume reduction occurred within the first h after applying hyaluronidase, with a 64.1% decrease from the initial volume. After 24 h, the total volume reduction reached 81.7%. No statistically significant differences were found when comparing the three groups at each follow-up time period, except for the height measurement after 1 h. While width was statistically significant in all groups between the investigated follow-up groups, the volume reduction was only statistically significant in the groups with the highest and second highest G' values (i.e., Group 1-structuring, Group 2-volumizing). CONCLUSION: The effectiveness of hyaluronidase in dissolving HA-based fillers is initially independent of product characteristics of HA-based fillers such as G-prime, with increased efficacy in fillers with higher G-prime values, as evidenced by significant volume reductions in such groups.

The Applicability of Dynamic External Fixator in a Prospective Evaluation of Open Tibial Fracture Treatment.

Aim: This prospective study assessed the clinical and radiological outcomes of open tibia fractures treated with a dynamic external fixator. Materials and methods: Twenty-five patients underwent surgical debridement and stabilisation with a dynamic external fixator between November 2016 and April 2022. Regular follow-up evaluated bone healing progression. Results: Favourable outcomes were demonstrated in 20 patients. However, there were three cases of non-union, two of which subsequently deformed, and two cases of pin site-related infection. There were no fracture site infections. Conclusion: This study demonstrates the use of dynamic external fixation in the treatment of open tibia fractures. The low incidence of complications suggests its effectiveness and potential. How to cite this article: Bezerra BS, Araujo TA, Cardonia GG, et al. The Applicability of Dynamic External Fixator in a Prospective Evaluation of Open Tibial Fracture Treatment. Strategies Trauma Limb Reconstr 2024;19(1):36-39.

Fully digital workflow of occlusal reconstruction treatment in a patient with congenital dentition defects.

OBJECTIVE: Occlusal reconstruction is a critical intervention for patients with dental hard tissue defects, temporomandibular joint (TMJ) disorders, and jaw position abnormalities. Clinical efficiency and outcomes of these procedures have improved with advances in digital technologies. This case report aims to illustrate a comprehensive digital workflow for occlusal reconstruction in a patient with congenital dentition defects, emphasizing the application of digital technologies to enhance treatment outcomes. CLINICAL CONSIDERATIONS: A 28-year-old woman with previously installed porcelain-fused-to-metal bridge restorations presented with a fractured prosthesis and TMJ symptoms. A multidisciplinary approach was adopted involving the use of digital facebow, intraoral scanners, digital smile design, and CAD/CAM technologies. The process included the extraction of defective restorations, temporary restorations to refine jaw position, and final permanent restorations. The digital workflow facilitated precise diagnostics and treatment, culminating in the successful installation of permanent restorations. Regular follow-ups at one- and three-months post-treatment confirmed stable occlusal function and high patient satisfaction. CONCLUSIONS: This case report showcases the potential of multiple digital technologies to streamline complex dental treatments and achieve high-quality results. CLINICAL SIGNIFICANCE: The integration of digital technologies in occlusal reconstruction treatments offers significant benefits in terms of precision, patient comfort, and esthetic outcomes.

Keratinocyte carcinomas, area-level socioeconomic status and geographic remoteness in Tasmania: cross-sectional associations and temporal trends.

OBJECTIVE: This article aims to examine cross-sectional associations and assess temporal trends in keratinocyte carcinoma (KC) incidence by area-level socioeconomic status (SES) and geographic remoteness in Tasmania, Australia. METHODS: KCs - basal cell carcinoma (BCC) and cutaneous squamous cell carcinoma (SCC) - registered by the Tasmanian Cancer Registry were assigned to area-level SES and remoteness area. Incidence rate ratios (2014-2018) were estimated using Poisson regression. Average annual percentage changes (2001-2018) were estimated using the Joinpoint Regression Program. RESULTS: BCC incidence increased with increasing area-level advantage (p-value for trend <0.001), but no trend was found for SCC. SCC incidence was higher in rural than urban areas (p-value <0.001), and BCC incidence was slightly higher in rural than urban areas for females (p-value = 0.009), but not for males (p-value = 0.373). BCC and SCC incidence increased between 2001 and the mid-2010s, when it peaked across most areas. CONCLUSIONS: Associations were found between BCC and higher area-level SES, and between SCC and geographic remoteness. The findings suggest differences in sun exposure behaviours, skin cancer awareness and access to services, or ascertainment bias. IMPLICATIONS FOR PUBLIC HEALTH: Efforts to control and deliver KC services in Tasmania should consider targeting populations with specific area-level characteristics.

Lack of country-wide systematic herpetology collections in Portugal jeopardizes future research and conservation.

Natural History Collections (NHCs) represent the world's largest repositories of long-term biodiversity datasets. Specimen collection and voucher deposition has been the backbone of NHCs since their inception, but recent decades have seen a drastic decline in rates of growth via active collecting. Amphibians and reptiles are amongst the most threatened zoological groups on the planet and are historically underrepresented in most worldwide NHCs. As part of an ongoing project to review the Portuguese zoological collections in the country's NHCs, herpetological data from its three major museums and smaller collections was gathered and used to examine the coverage and representation of the different taxa extant in Portugal. These collections are not taxonomically, geographically, or temporally complete. Approximately 90% of the Portuguese herpetological taxa are represented in the country's NHCs, and around half of the taxa are represented by less than 50 specimens. Geographically, the collections cover less than 30% of the country's territory and almost all of the occurring taxa have less than 10% of their known distribution represented in the collections. A discussion on the implications for science of such incomplete collections and a review of the current status of Portuguese NHCs is presented.

Oncopig bladder cancer cells recapitulate human bladder cancer treatment responses in vitro.

Introduction: Bladder cancer is a common neoplasia of the urinary tract that holds the highest cost of lifelong treatment per patient, highlighting the need for a continuous search for new therapies for the disease. Current bladder cancer models are either imperfect in their ability to translate results to clinical practice (mouse models), or rare and not inducible (canine models). Swine models are an attractive alternative to model the disease due to their similarities with humans on several levels. The Oncopig Cancer Model has been shown to develop tumors that closely resemble human tumors. However, urothelial carcinoma has not yet been studied in this platform. Methods: We aimed to develop novel Oncopig bladder cancer cell line (BCCL) and investigate whether these urothelial swine cells mimic human bladder cancer cell line (5637 and T24) treatment-responses to cisplatin, doxorubicin, and gemcitabine in vitro. Results: Results demonstrated consistent treatment responses between Oncopig and human cells in most concentrations tested (p>0.05). Overall, Oncopig cells were more predictive of T24 than 5637 cell therapeutic responses. Microarray analysis also demonstrated similar alterations in expression of apoptotic (GADD45B and TP53INP1) and cytoskeleton-related genes (ZMYM6 and RND1) following gemcitabine exposure between 5637 (human) and Oncopig BCCL cells, indicating apoptosis may be triggered through similar signaling pathways. Molecular docking results indicated that swine and humans had similar Dg values between the chemotherapeutics and their target proteins. Discussion: Taken together, these results suggest the Oncopig could be an attractive animal to model urothelial carcinoma due to similarities in in vitro therapeutic responses compared to human cells.

Synthesis of a novel monomer "DDTU-IDI" for the development of low-shrinkage dental resin composites.

OBJECTIVE: The current dental resin composites often suffer from polymerization shrinkage, which can lead to microleakage and potentially result in recurring tooth decay. This study presents the synthesis of a novel monomer, (3,9-diethyl-1,5,7,11-tetraoxaspiro[5,5]undecane-3,9-diyl)bis(methylene) bis((2-(3-(prop-1-en-2-yl)phenyl)propan-2-yl)carbamate) (DDTU-IDI), and evaluates its effect in the formulation of low-shrinkage dental resin composites. METHODS: DDTU-IDI was synthesized through a two-step reaction route, with the initial synthesis of the required raw material monomer 3,9-diethyl-3,9-dihydroxymethyl-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU). The structures were confirmed using Fourier-transform infrared (FT-IR) spectroscopy and hydrogen nuclear magnetic resonance (1HNMR) spectroscopy. Subsequently, DDTU-IDI was incorporated into Bis-GMA-based composites at varying weight percentages (5, 10, 15, and 20 wt%). The polymerization reaction, degree of conversion, polymerization shrinkage, mechanical properties, physicochemical properties and biocompatibility of the low-shrinkage composites were thoroughly evaluated. Furthermore, the mechanical properties were assessed after a thermal cycling test with 10,000 cycles to determine the stability. RESULTS: The addition of DDTU-IDI at 10, 15, and 20 wt% significantly reduced the polymerization volumetric shrinkage of the experimental resin composites, without compromising the degree of conversion, mechanical and physicochemical properties. Remarkably, at a monomer content of 20 wt%, the polymerization shrinkage was reduced to 1.83 ± 0.53%. Composites containing 10, 15, and 20 wt% DDTU-IDI exhibited lower water sorption and higher contact angle. Following thermal cycling, the composites exhibited no significant decrease in mechanical properties, except for the flexural properties. SIGNIFICANCE: DDTU-IDI has favorable potential as a component which could produce volume expansion and increase rigidity in the development of low-shrinkage dental resin composites. The development of low-shrinkage composites containing DDTU-IDI appears to be a promising strategy for reducing polymerization shrinkage, thereby potentially enhancing the longevity of dental restorations.

Selective Internal Radiation Therapy Using Y-90 Resin Microspheres for Metastatic Colorectal Cancer: An Updated Systematic Review and Network Meta-Analysis.

INTRODUCTION: This literature review and exploratory network meta-analysis (NMA) aimed to compare the clinical effectiveness and tolerability of selective internal radiation therapy (SIRT) using yttrium-90 (Y-90) resin microspheres, regorafenib (REG), trifluridine-tipiracil (TFD/TPI), and best supportive care (BSC) in adult patients with chemotherapy-refractory or chemotherapy-intolerant metastatic colorectal cancer (mCRC). METHODS: In light of recently published data, the literature was searched to complement and update a review published in 2018. Studies up to December 2022 comparing two or more of the treatments and reporting overall survival (OS), progression-free survival (PFS), or incidence of adverse events (AE) were included. The NMA compared hazard ratios (HRs) for OS and PFS using Markov chain Monte Carlo techniques. RESULTS: Fifteen studies were included, with eight studies added (none addressing SIRT). All active treatments improved OS in relation to BSC. SIRT had the longest OS among all treatments, although without statistically significant differences (HR [95% credible interval] for SIRT, 0.48 [0.27, 0.87]; TFD/TPI, 0.62 [0.46, 0.83]; REG, 0.78 [0.57, 1.05]) in a fixed effects model. Information regarding SIRT was insufficient for PFS analysis, and TFD/TPI was the best intervention (HR 2.26 [1.6, 3.18]). One SIRT study reported radioembolization-induced liver disease in > 10% of the sample; this was symptomatically managed. Non-haematological AEs (hand-foot skin reaction, fatigue, diarrhoea, hypertension, rash or desquamation) were more common with REG, while haematological events (neutropoenia, leukopenia, and anaemia) were more common with TFD/TPI. CONCLUSION: Current evidence supports SIRT treatment in patients with chemotherapy-refractory or chemotherapy-intolerant mCRC compared to newer oral agents, with comparable OS and low incidence of AEs.

An in vitro study using confocal laser scanning microscopy to evaluate the marginal misfits of different implant-supported frameworks.

PURPOSE: This study aimed to develop and evaluate a simple, non-destructive method for assessing the misfit and passivity of implant-retained prostheses frameworks. MATERIALS AND METHODS: To simulate the rehabilitation of a mandible posterior partially edentulous area using 3-unit screw-retained frameworks supported by two implants were fabricated and divided into the following five groups (n = 10 in each group): OP = one-piece framework cast in Co-Cr with the conventional method (control-group); Co-Cr frameworks sectioned and welded by laser (=LAS) or tungsten inert gas (=TIG); Co-Cr CAD-CAM = milled Co-Cr framework; Zir CAD-CAM = milled zirconia framework. The horizontal |X| and vertical |Y| misfits were measured using confocal laser scanning microscopy with one or both screws tightened. Data were analyzed by a two-way ANOVA with repeated measures and Bonferroni correction (α = 0.05). RESULTS: The greatest |X| misfit was observed in the OP group with both screws tightened (290 µm) and one screw tightened (388 and 340 µm). The conventional casting groups sectioned and welded by laser or TIG had lower mean values (235.35 µm, both screws tightened; and 275 µm, one screw tightened) than the OP framework. However, these values still exceeded those of the milled Co-Cr and zirconia frameworks (190 and 216 µm with both screws tightened). Across all reading conditions, every framework subjected to testing consistently maintained vertical |Y| misfit levels below the threshold of 53 µm; however, the milled frameworks exhibited higher vertical misfits than the frameworks obtained by the conventional cast method. CONCLUSIONS: The frameworks, whether cast and sectioned with laser welding or milled from Co-Cr, exhibit improved marginal misfit and enhanced passive fit when compared to other fabrication methods. Additionally, the use of confocal laser scanning microscopy is highly effective for passivity and misfit analysis.

Global DNA methylation patterns in Alcohol Use Disorder.

Alcohol Use Disorder (AUD) is a highly prevalent condition worldwide that produces a wide range of pathophysiological consequences, with a critical impact on health and social issues. Alcohol influences gene expression through epigenetic changes mainly through DNA methylation. In this sense, levels of 5-methylcytosine (5-mC), namely Global DNA methylation (GMe), which can be influenced by environmental and hormonal effects, represent a putative biological mechanism underlying alcohol effects. Our aim was to investigate the influence of AUD diagnosis and alcohol patterns (i.e., years of addiction, use in the last 30 days, and alcohol severity) on GMe levels. The sample consisted of 256 men diagnosed with AUD and 361 men without AUD. DNA samples from peripheral blood were used to assess GMe levels, measured through the levels of 5-mC using high-performance liquid chromatography. Results from multiple linear regression analysis indicated that the presence of AUD was associated with lower GMe levels (beta=-0.155, p=0.011). Other alcohol-related outcomes were not associated with DNA methylation. Our findings are consistent with the hypothesis that the impact of chronic and heavy alcohol use in GMe could be a potential mechanism mediating the multiple organ damages related to AUD.

International Consensus on Anti-Aging Dermocosmetics and Skin Care for Clinical Practice Using the RAND/UCLA Appropriateness Method.

BACKGROUND: The objective was to provide international recommendations on anti-aging dermocosmetics for clinical practice starting with essential ingredients for protection and repair before working up to advanced products for specific concerns.  Methods: Seven international experts reviewed 8 hypothetical case scenarios covering different ages, skin issues (eg, sensitivity, acne, melasma), and exposure to exposome factors for both sexes and all Fitzpatrick skin types (FST). The RAND/UCLA appropriateness method was used to obtain consensus. Seventeen key ingredients were rated on a scale from 1 (totally inappropriate) to 9 (totally appropriate). Statistical analysis, 2 meetings, and email discussions refined the recommendations. RESULTS: High-factor broad-spectrum sunscreen (ie, protects against ultraviolet [UV] A and B rays), niacinamide, and other topical antioxidants were recommended for all scenarios. Further discussions were required for other ingredients. Tinted sunscreen/iron oxide were recommended for all FST, although compliance may be sub-optimal for darker skin phototypes (IV-VI), if not cosmetically acceptable. Combining a facial foundation with broad-spectrum sunscreen was recommended for darker phototypes to obtain visible light protection closely matching diverse color tones. Retinols were not recommended as a first-line treatment for sensitive skin, especially FST V and VI, due to the risk of irritation. After ablative laser treatment, alpha hydroxy acids should be avoided or used with caution in FST IV to VI due to the risk of post-inflammatory hyperpigmentation. CONCLUSION: We describe a simple, practical tool for use in daily dermatology consultations for providing recommendations on anti-aging dermocosmetics to cover diverse and inclusive populations of patients, addressing all skin types and international needs.  J Drugs Dermatol. 2024;23(1):1337-1343.     doi:10.36849/JDD.7798.

International patterns and trends in the incidence of melanoma and cutaneous squamous cell carcinoma, 1989-2020.

BACKGROUND: Cutaneous squamous cell carcinoma (cSCC) and melanoma have different associations with sun exposure. OBJECTIVES: To compare trends in the incidence rates of cSCC and melanoma, to provide insight into changing patterns of exposure to ultraviolet radiation (UVR). METHODS: We compared trends in the incidence of cSCC and melanoma in seven susceptible populations residing at mid-to-high latitudes: Finland, Norway, Sweden, Denmark, Scotland, the Netherlands and Tasmania (Australia). We fitted Joinpoint models to describe trends in age-standardized incidence rates for melanoma and cSCC and calculated the average annual percentage rate of change for the period 1989-2020 (1989-2018 for Tasmania). We calculated the incident rate ratio (IRR) as the ratio of the age-standardized rates (European Standard Population) for cSCC to melanoma and conducted age-period-cohort modelling to compare age, period and cohort effects. RESULTS: The ratio of cSCC-to-melanoma incidence increased with proximity to the equator and over time. In the most recent time period, the incidence of cSCC was higher than the incidence of melanoma for men and women in all seven populations. While the ratio of cSCC-to-melanoma incidence was higher for men vs. women, in most countries the cSCC-to-melanoma IRR increased over time to a greater extent in women than in men. Melanoma incidence was higher among younger people and cSCC incidence was higher among older people; the age at which the incidence of cSCC overtook the incidence of melanoma was progressively younger with proximity to the equator. CONCLUSIONS: Despite concerted international efforts to preserve the ozone layer over the past four decades resulting in significant reductions in surface ultraviolet B at mid-latitudes, the incidence of skin cancer, particularly cSCC, continues to rise in those regions. Our findings are consistent with a stronger association with age-associated cumulative sun exposure for cSCC vs. melanoma and suggest that women are currently receiving greater UV radiation exposure than in the past.

The association between electrode impedance and short-term outcomes in cochlear implant recipients of slim modiolar and slim straight electrode arrays.

OBJECTIVES: Electrode impedance measurements from cochlear implants (CI) reflect the status of the electrode array as well as the surrounding cochlear environment, and could provide a clinical index of functional changes with the CI. The goals of this study were to examine (1) the impact of electrode array type on electrode impedance, and (2) the relationship between electrode impedance and short-term hearing preservation and speech recognition outcomes. METHODS: Retrospective study of 115 adult hearing preservation CI recipients of a slim modiolar or slim straight array. Common ground electrode impedances, pre- and post-operative hearing thresholds and CNC word recognition scores were retrieved. RESULTS: Electrode impedances were significantly higher for recipients of the straight electrode array. Within individuals, electrode impedances were stable after the first week post-activation. However, increased standard deviation of electrode impedances was associated with greater loss of low frequency hearing at initial activation, and with poorer speech recognition at 6 months post-implantation. CONCLUSIONS: Results demonstrate that electrode impedances depend on the type of implanted array. Findings also suggest that there may be a role for the variability in electrode impedance across electrodes as an indicator of changes in the intracochlear environment that contribute to outcomes with a CI.

Durability of the improvement of collagen I and collagen III with the use of oral isotretinoin in the treatment of photoaging.

BACKGROUND: Oral isotretinoin (ISO) is the drug of choice for the treatment of severe acne. For photoaging treatment, ISO has been proved to be effective in some controlled and noncontrolled trials and is an alternative to topical retinoic acid (RA) therapy, which causes an expected skin irritation. OBJECTIVE: To evaluate and compare the skin remodeling in patients taking ISO 20 mg 3 times a week for 12 weeks and 12 weeks after the end of the treatment to quantify collagen I and collagen III augmentation. MATERIAL AND METHODS: Immunohistochemical studies were performed to evaluate the expression of collagen I and collagen III, metalloproteinases (MMPs) -1, -3, -7, -9, -12, and the tissue inhibitor of MMP type-1 (TIMP-1) of the skin of 20 45 to 50-year-old women through morphometry in a semiquantitative method. The inclusion criteria were facial aging 2 and 3 of Glogau's classification, with phototypes between II and V who had not entered menopause. Biopsies of the skin of the left preauricular region were performed at three different times: pre-treatment (T0), end of 12-week treatment (T1), and 12 weeks posttreatment (T2). RESULTS: Collagen fibers I and III increased with statistical significance in T1 (50.7%; P = 0.012) but not in T2 (49.7%), which in turn was higher than in T0 (47.2%) for collagen I and T1 (33.3%; P = 0.002) but not in T2 (32.7%), and also was higher than T0 (32.0%) for collagen III. MMP-9 presented a decreased activity with statistical significance in T1 (P = 0.047) and T2 (P = 0.058). MMP-1 showed a reduction in T2 only (P = 0.015). MMPs -3, -7, -12, and TIMP-1 did not present significant modification in their expressions during or after the treatment. CONCLUSIONS: Low-dose ISO is effective in remodeling the extracellular matrix (ECM). This study found that the increase of collagen occurs through the augmentation of both collagen I and collagen III fibers. With originality, it was possible to verify the durability of these fibers for at least 12 weeks. This may be related to the decrease in MMP-9 expression verified at the end of the treatment and 12 weeks posttreatment.

The "real life" efficacy of dupilumab is independent of initial polyp size and concomitant steroids in CRSwNP.

BACKGROUND: Dupilumab significantly improves symptom control in chronic rhinosinusitis with nasal polyps (CRSwNP). Patients with large polyps at the initiation of treatment (total polyp score (TPS) ≥ 5) have been the focus in published studies. Patients with significant burden of disease but small polyps (TPS ≤ 4) have not yet been evaluated for clinical response. This study set out to evaluate the benefit of dupilumab treatment on cohorts of small (TPS ≤ 4) compared to large polyps (TPS ≥ 5). Furthermore, benefit of concomitant oral and/or nasal steroid therapy has been evaluated. METHODS: 97 patients with CRSwNP, who were begun on dupilumab between January 2020 and October 2021, were included. All patients were followed-up for 6 months. At each visit they underwent nasal endoscopy, smell identification tests and filled out validated patient questionnaires. RESULTS: Significant drops in TPS were seen in both patient groups after 6 months of therapy, dropping from a median score of 3 to 0 and from 6 to 2 in patients with small and large polyps respectively. Furthermore, a linear mixed model calculated a drop of 22% and 24% in TPS per month in patients with small and large polyps respectively with no significant difference in rate of decline. Finally the model showed that neither oral nor nasal steroids influenced the rate of response to dupilumab therapy. CONCLUSIONS: Polyp size at the initiation of dupilumab therapy and whether patients continue to take steroid therapy does not appear to influence effectiveness of dupilumab treatment.

Production of perillic acid from orange essential oil by Yarrowia lipolytica using a top-aerated bioreactor.

R-(+)-Perillic acid, a promising anticancer and immunomodulatory agent, is the major product from the biotransformation of R-(+)-limonene-rich orange essential oil by the yeast Yarrowia lipolytica. Due to the abundance and low cost of orange essential oil, which is a byproduct of the citrus industry, we attempted to improve the biotransformation process by optimizing yeast cell mass production. Then, the whole process was transposed and adapted to a 2-L instrumented bioreactor. Cell mass production was optimized in shaker flasks using a statistical experimental design. The optimized medium (g·L-1: 22.9 glucose, 7.7 peptone, 4.1 yeast extract and 1.0 malt extract) resulted in a 13.0 g·L-1 final cell concentration and 0.18 g cell·L-1·h-1 productivity. A further increase to 18.0 g·L-1 was achieved in a 2-L bioreactor upon fed-batch culture. High-purity limonene bioconversion was performed in the same bioreactor utilizing top aeration to diminish terpene volatilization; as a result, 839.6 mg·L-1 perillic acid accumulated after 48 h. Under the same conditions, industrial orange essential oil afforded 806.4 mg·L-1 perillic acid. The yeast growth medium optimization resulted in a twofold increase in biomass accumulation and a reduction in growth medium nitrogen sources, which lowered the catalytic biomass production cost. Compared with conventional bottom aeration, the bioreactor top aeration strategy resulted in higher bioconversion rates. The conditions developed for high-purity limonene bioconversion were successfully applied to low-cost orange essential oil, showing the robustness of Y. lipolytica yeast.

Bioactive Dental Resin Composites with MgO Nanoparticles.

Photoactivating dental resin composites have been the most prevailing material for repairing dental defects in various clinical scenarios due to their multiple advantages. However, compared to other restorative materials, the surface of resin-based composites is more susceptible to plaque biofilm accumulation, which can lead to secondary caries and restoration failure. This study introduced different weight fractions (1, 2, 5, 10, and 15%) of magnesium oxide nanoparticles (MgONPs) as antibacterial fillers into dental resin composites. Multifarious properties of the material were investigated, including antibacterial activity against a human salivary plaque-derived biofilm, cytotoxicity on human gingival fibroblasts, mechanical and physicochemical properties as well as the performance when subjected to thermocycling aging treatment. Results showed that the incorporation of MgONPs significantly improved the composites' anti-biofilm capability even at a low amount of 2 wt % without compromising the mechanical, physicochemical, and biocompatibility performances. The results of the thermocycling test suggested certain of aging resistance. Moreover, a small amount of MgONPs possibly made a difference in enhancing photoactivated polymerization and increasing the curing depth of experimental resin composites. Overall, this study highlights the potential of MgONPs as an effective strategy for developing antibacterial resin composites, which may help mitigating cariogenic biofilm-associated secondary caries.

Keratinocyte carcinomas, area-level socioeconomic status and geographic remoteness in Tasmania: cross-sectional associations and temporal trends.

OBJECTIVE: This article aims to examine cross-sectional associations and assess temporal trends in keratinocyte carcinoma (KC) incidence by area-level socioeconomic status (SES) and geographic remoteness in Tasmania, Australia. METHODS: KCs-basal cell carcinoma (BCC) and cutaneous squamous cell carcinoma (SCC)-registered by the Tasmanian Cancer Registry were assigned to area-level SES and remoteness area. Incidence rate ratios (2014-2018) were estimated using Poisson regression. Average annual percentage changes (2001-2018) were estimated using the Joinpoint Regression Program. RESULTS: BCC incidence increased with increasing area-level advantage (p value for trend <0.001), but no trend was found for SCC. SCC incidence was higher in rural than urban areas (p value <0.001), and BCC incidence was slightly lower in rural than urban areas for males (p value = 0.026), but not for females (p value = 0.381). BCC and SCC incidence increased between 2001 and the mid-2010s, when it peaked across most areas. CONCLUSIONS: Associations were found between BCC and higher area-level SES, and between SCC and geographic remoteness. The findings suggest differences in sun exposure behaviours, skin cancer awareness and access to services, or ascertainment bias. IMPLICATIONS FOR PUBLIC HEALTH: Efforts to control and deliver KC services in Tasmania should consider targeting populations with specific area-level characteristics.

The effect of abutment material stiffness on the mechanical behavior of dental implant assemblies: A 3D finite element study.

PURPOSE: This study aimed to evaluate the stress distribution and microgap formation in implant assemblies with conical abutments made of different materials under an oblique load. MATERIALS AND METHODS: The mechanical behavior of an implant assembly with a titanium abutment was analyzed and compared with that of an assembly with a Y-TZP abutment using finite element analysis (FEA). A torque of 20 Ncm was first applied to the abutment screw, followed by oblique loads of 10 N-280 N applied to the prosthesis placed on the implant. The maximum stress in the abutment screw, the microgap formation process, and the critical load for bridging the internal implant space were evaluated. RESULTS: No significant difference in stress distribution between the two cases was observed, with the stresses being mainly concentrated at the top half of the screw (the predicted maximum von Mises stress was approximately 1200 MPa at 280 N). The area in contact at the implant-to-abutment interface decreased with increasing load for both abutments, with the critical load for bridging the internal implant space being roughly 140 N. The maximum gap size being was approximately 470 µm with either abutment. CONCLUSION: There was no significant difference in the stress distribution or microgap formed between implant assemblies with titanium and Y-TZP abutments having an internal conical connection.