Incorporation of Bismuth(III) Oxide Nanoparticles into Carbon Ceramic Composite: Electrode Material with Improved Electroanalytical Performance in 4-Chloro-3-Methylphenol Determination.

In this study, a carbon ceramic electrode (CCE) with improved electroanalytical performance was developed by bulk-modifying it with bismuth(III) oxide nanoparticles (Bi-CCE). Characterization of the Bi-CCE was conducted employing atomic force microscopy, scanning electron microscopy with energy-dispersive X-ray spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy. Comparative analysis was conducted using an unmodified CCE. The findings proved that the incorporation of Bi2O3 nanoparticles into the CCE significantly altered the morphology and topography of the ceramic composite, and it improved the electrochemical properties of CCE. Notably, the Bi-CCE demonstrated a prolonged operational lifespan of at least three months, and there was a high reproducibility of the electrode preparation procedure. The developed Bi-CCE was effectively employed to explore the electrochemical behavior and quantify the priority environmental pollutant 4-chloro-3-methylphenol (PCMC) using CV and square-wave voltammetry (SWV), respectively. Notably, the developed SWV procedure utilizing Bi-CCE exhibited significantly enhanced sensitivity (0.115 µA L mol-1), an extended linearity (0.5-58.0 µmol L-1), and a lower limit of detection (0.17 µmol L-1) in comparison with the unmodified electrode. Furthermore, the Bi-CCE was utilized effectively for the detection of PCMC in a river water sample intentionally spiked with the compound. The selectivity toward PCMC determination was also successfully assessed.

Fabrication and Characterization of an Electrochemical Platform for Formaldehyde Oxidation, Based on Glassy Carbon Modified with Multi-Walled Carbon Nanotubes and Electrochemically Generated Palladium Nanoparticles.

This study outlines the fabrication process of an electrochemical platform utilizing glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and palladium nanoparticles (PdNPs). The MWCNTs were applied on the GCE surface using the drop-casting method and PdNPs were produced electrochemically by a potentiostatic method employing various programmed charges from an ammonium tetrachloropalladate(II) solution. The resulting GCEs modified with MWCNTs and PdNPs underwent comprehensive characterization for topographical and morphological attributes, utilizing atomic force microscopy and scanning electron microscopy along with energy-dispersive X-ray spectrometry. Electrochemical assessment of the GCE/MWCNTs/PdNPs involved cyclic voltammetry (CV) and electrochemical impedance spectroscopy conducted in perchloric acid solution. The findings revealed even dispersion of PdNPs, and depending on the electrodeposition parameters, PdNPs were produced within four size ranges, i.e., 10-30 nm, 20-40 nm, 50-60 nm, and 70-90 nm. Additionally, the electrocatalytic activity toward formaldehyde oxidation was assessed through CV. It was observed that an increase in the size of the PdNPs corresponded to enhanced catalytic activity in the formaldehyde oxidation reaction on the GCE/MWCNTs/PdNPs. Furthermore, satisfactory long-term stability over a period of 42 days was noticed for the GCE/MWCNTs/PDNPs(100) material which demonstrated the best electrocatalytic properties in the electrooxidation reaction of formaldehyde.

Improved procedure for square-wave voltammetric sensing of fenhexamid residues on blueberries peel surface at the anodically pretreated boron-doped diamond electrode.

BACKGROUND: Fungicide fenhexamid (FH) has a high residual concentration on fruits and vegetables, thus, it is of high importance to monitor the level of FH residues on foodstuff samples. So far, the assay of FH residues in selected foodstuff samples has been conducted by electroanalytical methods on sp2 carbon-based electrodes that are well-known to be susceptible to severe fouling of the electrodes surfaces during electrochemical measurements. As an alternative, sp3 carbon-based electrode such as boron-doped diamond (BDD) can be used in the analysis of FH residues retained on the peel surface of foodstuff (blueberries) sample. RESULTS: In situ anodic pretreatment of the BDDE surface was found to be the most successful strategy to remediate the passivated BDDE surface by FH oxidation (by)products, and the best validation parameters, i.e., the widest linear range (3.0-100.0 µmol L-1), the highest sensitivity (0.0265 µA L µmol-1) and the lowest limit of detection (0.821 µmol L-1), were achieved on the anodically pretreated BDDE (APT-BDDE) in a Britton-Robinson buffer, pH 2.0, using square-wave voltammetry (SWV). The assay of FH residues retained on blueberries peel surface was performed on the APT-BDDE using SWV, and the obtained concentration of FH residues of 6.152 µmol L-1 (1.859 mg kg-1) was found to be below the maximum residue value fixed for blueberries by the European Union regulations (20 mg kg-1). SIGNIFICANCE AND NOVELTY: In this work, a protocol based on a very easy and fast foodstuff sample preparation procedure combined with the straightforward pretreatment approach of the BDDE surface was elaborated for the first time for the monitoring of the level of FH residues retained on the peel surface of blueberries samples. The presented reliable, cost-effective, and easy-to-use protocol could find its application as a rapid screening method for the control of food safety.

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review.

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Enhancing electroanalytical performance of porous boron-doped diamond electrodes by increasing thickness for dopamine detection.

Novel porous boron-doped diamond (BDDporous)-based materials have attracted lots of research interest due to their enhanced detection ability and biocompatibility, favouring them for use in neuroscience. This study reports on morphological, spectral, and electrochemical characterisation of three BDDporous electrodes of different thickness given by a number of deposited layers (2, 3 and 5). These were prepared using microwave plasma-enhanced chemical vapour deposition on SiO2 nanofiber-based scaffolds. Further, the effect of number of layers and poly-l-lysine coating, commonly employed in neuron cultivation experiments, on sensing properties of the neurotransmitter dopamine in a pH 7.4 phosphate buffer media was investigated. The boron doping level of ∼2 × 1021 atoms cm-3 and increased content of non-diamond (sp2) carbon in electrodes with more layers was evaluated by Raman spectroscopy. Cyclic voltammetric experiments revealed reduced working potential windows (from 2.4 V to 2.2 V), higher double-layer capacitance values (from 405 µF cm-2 to 1060 µF cm-2), enhanced rates of electron transfer kinetics and larger effective surface areas (from 5.04 mm2 to 7.72 mm2), when the number of porous layers increases. For dopamine, a significant boost in analytical performance was recognized with increasing number of layers using square-wave voltammetry: the highest sensitivity of 574.1 µA µmol-1 L was achieved on a BDDporous electrode with five layers and dropped to 35.9 µA µmol-1 L when the number of layers decreased to two. Consequently, the lowest detection limit of 0.20 µmol L-1 was obtained on a BDDporous electrode with five layers. Moreover, on porous electrodes, enhanced selectivity for dopamine detection in the presence of ascorbic acid and uric acid was demonstrated. The application of poly-l-lysine coating on porous electrode surface resulted in a decrease in dopamine peak currents by 17% and 60% for modification times of 1 h and 15 h, respectively. Hence, both examined parameters, the number of deposited porous layers and the presence of poly-l-lysine coating, were proved to considerably affect the characteristics and performance of BDDporous electrodes.

Comparison of electrochemical performance of various boron-doped diamond electrodes: Dopamine sensing in biomimicking media used for cell cultivation.

Chemically inert and biocompatible boron-doped diamond (BDD) has been successfully used in neuroscience for sensitive neurochemicals sensing and/or as a growth substrate for neurons. In this study, several types of BDD differing in (i) fabrication route, i.e. conventional microwave plasma enhanced chemical vapour deposition (MW-PECVD) reactor vs. MW-PECVD with linear antenna delivery system, (ii) morphology, i.e. planar vs. porous BDD, and (iii) surface treatment, i.e. H-terminated (H-BDDs) vs. O-terminated (O-BDDs), were characterized from a morphological, structural, and electrochemical point of view. Further, planar and porous BDD-based electrodes were tested for sensing of dopamine in common biomimicking environments of pH 7.4, namely phosphate buffer (PB) and HEPES buffered saline (HBS). In HBS, potential windows are narrowed due to electrooxidation of its buffering component (i.e. HEPES), however, dopamine sensing in HBS is possible. H-BDDs (both planar and porous) outperformed O-BDDs as they provided clearer dopamine signals with higher peak currents. As expected, due to its enlarged surface area and increased sp2 content, the highest sensitivity and lowest detection limits of 8 × 10-8 mol L-1 and 6 × 10-8 mol L-1 in PB and HBS media, respectively, were achieved by square-wave voltammetry on porous H-BDD.

Rapid monitoring of fungicide fenhexamid residues in selected berries and wine grapes by square-wave voltammetry at carbon-based electrodes.

A completely new electroanalytical method for the determination of fenhexamid (FNX) residues in fruit samples has been developed. This method is based on anodic oxidation of fungicide in Britton-Robinson buffer (pH 4) containing 10% (v/v) methanol using square-wave voltammetry when five different carbon-based electrodes were tested. An electrochemical behaviour of FNX was studied on a glassy carbon electrode using cyclic voltammetry, while glassy carbon paste electrode was selected for analytical purposes. Linear range for FNX from 3.96 to 49.50 µmol L-1 characterized by coefficient of determination of 0.9964, sensitivity of 0.176 µA L µmol-1, and detection limit of 1.32 µmol L-1 were calculated. Results acquired from analyses of blueberries and wine grapes were compared to those obtained by a reference chromatographic method, and a satisfactory agreement has been reached. Finally, it seems that the present voltammetric approach could find its application in food quality control as screening assay.

Synthesis and characterization of the thermally reduced graphene oxide in argon atmosphere, and its application to construct graphene paste electrode as a naptalam electrochemical sensor.

New insight into the preparation of sensitive carbon-based electrochemical electrode is provided by examining the properties of thermally reduced graphene oxide (TRGO). In this paper, TRGO was prepared by thermal reduction of graphene oxide (GO) in argon atmosphere, and characterized by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction (SAED), and atomic force microscopy (AFM). Results showed that thermal reduction in argon was effective to remove oxygen-containing functional groups in GO, and graphene sheets were obtained. Furthermore, TRGO was used to prepare thermally reduced graphene oxide paste electrode (TRGOPE) which showed excellent conductivity and fast electron transfer kinetics confirmed by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrode was applied to determination of the pesticide naptalam (Nap) in square-wave voltammetric (SWV) mode. The corresponding current at approx. +1.0 V increased linearly with the Nap concentration within two linear dynamic ranges (LDR) of 0.1-1.0 µmol L-1 (LDR1) and 1.0-10.0 µmol L-1 (LDR2). The limits of detection (LOD) and quantification (LOQ) for Nap were calculated as 0.015 µmol L-1 and 0.051 µmol L-1, respectively. In comparison to the carbon paste electrode (CPE) the results showed that the TRGOPE possesses advantages in terms of linearity, sensitivity and detectability.

Improved electroanalytical characteristics for the determination of pesticide metobromuron in the presence of nanomaterials.

In the present work, bare ultra trace graphite electrode (UTGE), UTGE modified with multi-walled carbon nanotubes (UTGE-MWCNTs), and UTGE modified with graphene nanoplatelets (UTGE-GNPs) were considered as working electrodes. For the first time, the UTGEs were modified with MWCNTs and GNPs by simple and fast drop-casting approach (the whole procedures take no more times than ca. 30 min). The comprehensive microscopic and electrochemical characterization of the unmodified and the modified UTGEs was conducted by means of atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) techniques. The prepared electrodes were further applied for the analytical purposes, and the procedures for the square-wave voltammetric (SWV) determination of pesticide metobromuron (Mbn) using the bare UTGE, the UTGE-MWCNTs, and the UTGE-GNPs were developed. For the first time, this compound was electrochemically investigated. The SWV measurements were performed in Britton-Robinson buffer (B-R) solution at pH 2.0 as a supporting electrolyte. SWV parameters, i.e. amplitude, frequency, and step potential, were optimized. The linear relationships between peak current vs. increasing concentrations of Mbn were defined using the bare UTGE, the UTGE-MWCNTs, and the UTGE-GNPs, and the limits of detection were calculated (0.13, 0.11, 0.048 µmol L-1, respectively). The analytical parameters determined from calibration curves indicate similar sensitivity on all tested electrodes, however, the widest linearity range as well as the lowest LOD and LOQ values were achieved on the UTGE modified with GNPs. The utility of the proposed method with the UTGE-GNPs was verified by the quantitative analysis of Mbn in soil samples with satisfactory results (recovery of 99.1%). Furthermore, the impact of possible interferences was tested and evaluated, and obtained results proved good selectivity of the proposed method.

ß-Cyclodextrins incorporated multi-walled carbon nanotubes modified electrode for the voltammetric determination of the pesticide dichlorophen.

In this work, a glassy carbon electrode modified with ß-cyclodextrins and multi-walled carbon nanotubes (ß-CDs/MWCNTs/GCE) was constructed and applied for the square-wave adsorptive stripping voltammetric (SWAdSV) determination of the pesticide dichlorophen (Dcp). For the first time, this compound was electrochemically investigated. The voltammetric measurements were conducted in phosphate buffer (PBS) at pH 6.5 as a supporting electrolyte, and SWAdSV technique parameters were optimized. A linear calibration curve in the wide concentration range from 5.0 × 10-8molL-1 to 2.9 × 10-6molL-1 was obtained. Excellent analytical performance in terms of limit of detection (LOD) of 1.4 × 10-8molL-1 was achieved. The utility of the proposed method was verified by the quantitative analysis of Dcp in Pilica River water samples with satisfactory results. The characterization of modified electrodes was conducted by means of atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Moreover, in this work, the dissociation constants (pKa) of Dcp using potentiometric pH titration were estimated. The stoichiometry of the Dcp-ß-CDs inclusion complex formed in solution was determined by proton nuclear magnetic resonance (1H NMR) spectroscopy, and a binding constant (ß2) was estimated from NMR titration studies.

Electrochemical determination of closantel in the commercial formulation by square-wave adsorptive stripping voltammetry.

ABSTRACT: In this paper, the square-wave adsorptive stripping voltammetric (SWAdSV) determination of the veterinary drug closantel using a renewable silver amalgam film electrode (Hg(Ag)FE) is presented. As observed in SWAdSV, closantel provided one well-shaped reduction peak suitable for analytical purposes at potential ca. -1.4 V in the Britton-Robinson (B-R) buffer at pH 7.0. At optimal conditions, the SWAdSV response of Hg(Ag)FE for determining closantel was linear over two concentration ranges of 5.0 × 10-8 to 2.0 × 10-7 mol dm-3 and 2.0 × 10-7 to 1.2 × 10-6 mol dm-3 with a detection limit of 1.1 × 10-8 mol dm-3. In addition, a relevance of the developed SWAdSV method was successfully verified by the quantitative analysis of closantel in the commercial formulation Closamectin Pour-On with satisfactory results (RSD = 5.8%, recovery = 101.8%). The results showed that the developed procedure can be adequate for screening purposes. Also, the electrochemical behavior of closantel was characterized by cyclic voltammetry, and it was found that closantel exhibited a quasi-reversible behavior with cathodic peak on the forward scan at ca. -1.4 V and anodic peak on the reverse scan at ca. -1.35 V vs. Ag/AgCl in B-R buffer, pH 7.0. As the obtained results showed that the electrode mechanism of closantel is controlled by the adsorption, the effect of adsorption was studied using the electrochemical impedance spectroscopy technique.

Electrochemical study of the fungicide acibenzolar-s-methyl and its voltammetric determination in environmental samples.

The electrochemical behavior of new generation fungicide acibenzolar-s-methyl (S-methyl 1,2,3-benzothiadiazole-7-carbothioate, ASM) on the hanging mercury drop electrode (HMDE) was investigated using square wave adsorptive stripping voltammetry. This method of determination is based on the irreversible reduction of ASM at the HMDE. The well-defined ASM peak was observed at -0.4 V (vs. Ag/AgCl) in BR buffer at pH 2.2. The reduction peak current was proportional to concentration of ASM from 1.0 × 10(-8) to 6.0 × 10(-8) mol L(-1) with detection and quantification limit 3.0 × 10(-9) and 1.0 × 10(-8) mol L(-1), respectively. The applicability of the developed method for analysis of spiked samples of tap water, river water, and soil is illustrated. The effect of adsorption on the mercury electrode was studied in detail using the AC impedance method. Possible interferences with other common pesticides and heavy metal ions were examined. Clarification of the electrode mechanism was made using cyclic voltammetry (CV) technique.

Conditioning of renewable silver amalgam film electrode for the characterization of clothianidin and its determination in selected samples by adsorptive square-wave voltammetry.

A new square-wave adsorptive stripping voltammetric (SWAdSV) method was developed for the determination of the neonicotinoid insecticide clothianidin (Clo), based on its reduction at a renewable silver amalgam film electrode (Hg(Ag)FE). The key point of the procedure is the pretreatment of the Hg(Ag)FE by applying the appropriate conditioning potential (-1.70 V vs. Ag/AgCl reference electrode). Under the optimized voltammetric conditions, such pretreatment resulted in the peak for the Clo reduction in Britton-Robinson buffer pH 9.0 at about -0.60 V, which was used for the analytical purpose. The developed SWAdSV procedure made it possible to determine Clo in the concentration range of 6.0×10(-7)-7.0×10(-6) mol L(-1) (LOD=1.8×10(-7) mol L(-1), LOQ=6.0×10(-7) mol L(-1)) and 7.0×10(-6)-4.0×10(-5) mol L(-1) (LOD=1.3×10(-6) mol L(-1), LOQ=4.2×10(-6) mol L(-1)). The repeatability, precision, and the recovery of the method were determined. The effect of common interfering pesticides was also investigated. Standard addition method was successfully applied and validated for the determination of Clo in spiked Warta River water, corn seeds samples, and in corn seeds samples treated with the commercial formulation PONCHO 600 FS.