ABSTRACT
Cellulose nanofibrils (CNFs) are high aspect ratio, natural nanomaterials with high mechanical strength-to-weight ratio and promising reinforcing dopants in polymer nanocomposites. In this study, we used CNFs and oxidized CNFs (TOCNFs), prepared by a 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation process, as reinforcing agents in poly(vinylidene fluoride) (PVDF). Using high-shear mixing and doctor blade casting, we prepared free-standing composite films loaded with up to 5 wt % cellulose nanofibrils. For our processing conditions, all CNF/PVDF and TOCNF/PVDF films remain in the same crystalline phase as neat PVDF. In the as-prepared composites, the addition of CNFs on average increases crystallinity, whereas TOCNFs reduces it. Further, addition of CNFs and TOCNFs influences properties such as surface wettability, as well as thermal and mechanical behaviors of the composites. When compared to neat PVDF, the thermal stability of the composites is reduced. With regards to bulk mechanical properties, addition of CNFs or TOCNFs, generally reduces the tensile properties of the composites. However, a small increase (~18%) in the tensile modulus was observed for the 1 wt % TOCNF/PVDF composite. Surface mechanical properties, obtained from nanoindentation, show that the composites have enhanced performance. For the 5 wt % CNF/PVDF composite, the reduced modulus and hardness increased by ~52% and ~22%, whereas for the 3 wt % TOCNF/PVDF sample, the increase was ~23% and ~25% respectively.
ABSTRACT
We investigate computationally the role of Stone-Wales (SW) defects on the interfacial interactions among graphene, carbon nanotubes (CNTs), and Nylon 6 using density functional theory (DFT) and the empirical force-field. Our first-principles DFT calculations were performed using the Quantum ESPRESSO electronic structure code with the highly accurate van der Waals functional (vdW-DF2). Both pristine and SW-defected carbon nanomaterials were investigated. The computed results show that the presence of SW defects on CNTs weakens the CNT-graphene interactions. Our result that CNT-graphene interaction is much stronger than CNT-CNT interaction indicates that graphene would be able to promote the dispersion of CNTs in the polymer matrix. Our results demonstrate that carbon nanomaterials form stable complexes with Nylon 6 and that the van der Waals interactions, as revealed by the electronic charge density difference maps, play a key stabilizing role on the interfacial interactions among graphene, CNTs, and Nylon 6. Using the density of states calculations, we observed that the bandgaps of graphene and CNTs were not significantly modified due to their interactions with Nylon 6. The Young's moduli of complexes were found to be the averages of the moduli of their individual constituents.
ABSTRACT
Coatings prepared from titania-thiol-ene compositions were found to be both self-cleaning, as measured by changes in water contact angle, and photocatalytic toward the degradation of an organic dye. Stable titania-thiol-ene dispersions at approximately 2 wt % solids were prepared using a combination of high-shear mixing and sonication in acetone solvent from photocatalytic titania, trisilanol isobutyl polyhedral oligomeric silsesquioxane (POSS) dispersant, and select thiol-ene monomers, i.e., trimethylolpropane tris(3-mercaptopropionate) (TMPMP), pentaerythritol allyl ether (APE), and 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TTT). The dispersed particle compositions were characterized by DLS and TEM. The synthetic methods employed yield a strongly bound particle/POSS complex, supported by IR, 29Si NMR, and TGA. The factors of spray techniques, carrier solvent volatility, and particle size and size distributions, in combination, likely all contribute to the highly textured but uniform surfaces observed via SEM and AFM. Polymer composites possessed thermal transitions (e.g., Tg) consistent with composition. In general, the presence of polymer matrix provided mechanical integrity, without significantly compromising or prohibiting other critical performance characteristics, such as film processing, photocatalytic degradation of adsorbed contaminants, and the hydrophobic-hydrophilic transition. In all cases, coatings containing photocatalytic titania were converted from superhydrophobic to superhydrophilic, as defined by changes in the water contact angle. The superhydrophilic state of samples was considered persistent, since long time durations in complete darkness were required to observe any significant hydrophobic return. In a preliminary demonstration, the photocatalytic activity of prepared coatings was confirmed through the degradation of crystal violet dye. This work demonstrates that a scalable process can be found to prepare titania-thiol-ene coatings having improved coating properties which also exhibit photocatalytic and self-cleaning attributes.
ABSTRACT
Fullerene-containing materials have the ability to store and release electrical energy. Therefore, fullerenes may ultimately find use in high-voltage equipment devices or as super capacitors for high electric energy storage due to this ease of manipulating their excellent dielectric properties and their high volume resistivity. A series of structured fullerene (C60) polymer nanocomposites were assembled using the thiol-ene click reaction, between alkyl thiols and allyl functionalized C60 derivatives. The resulting high-density C60-urethane-thiol-ene (C60-Thiol-Ene) networks possessed excellent mechanical properties. These novel networks were characterized using standard techniques, including infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermal gravimetric analysis (TGA). The dielectric spectra for the prepared samples were determined over a broad frequency range at room temperature using a broadband dielectric spectrometer and a semiconductor characterization system. The changes in thermo-mechanical and electrical properties of these novel fullerene-thiol-ene composite films were measured as a function of the C60 content, and samples characterized by high dielectric permittivity and low dielectric loss were produced. In this process, variations in chemical composition of the networks were correlated to performance characteristics.
ABSTRACT
A unique, durable, nonleaching antimicrobial urethane coating possessing energy-dampening properties is reported. Five novel diol-functionalized quaternary ammonium bromide salts were designed, synthesized, and cross-linked with a commercial polyisocyanate to afford novel multifunctional self-decontaminating coatings. Leaching of the antimicrobial into the environment is eliminated because of the biocidal tether. The effectiveness of these molecules to self-concentrate at the air-polymer interface without addition of other surface modifying additives proved extremely advantageous, and consequently resulted in microphase separation as confirmed by AFM. The coatings were designed to continuously decontaminate against a variety of pathogenic bacteria in addition to affording preliminary dampening properties. Minimum inhibitory concentration studies as well as surface antimicrobial evaluations were conducted using both Gram-positive and Gram-negative bacteria. Additionally, viscoelastic properties, hardness, tack, and surface energy measurements were used to correlate with coating performance.
