The reduction behavior of sulfurized polyacrylonitrile (SPAN) in lithium-sulfur batteries using a carbonate electrolyte: a computational study.

Lithium-sulfur batteries (LSBs) have attracted attention due to their high theoretical energy density. This and various other advantages, such as the availability and non-toxicity of sulfur, raise interest in LSBs against the background of the energy revolution. However, a polysulfide shuttle mechanism can adversely affect the electrochemical performance of the cell. The sulfur redox properties are influenced, for example, by the electrolyte and the cathode material. Here, a computational study of the discharge process of an LSB with sulfurized poly(acrylonitrile) (SPAN) as the cathode material in combination with a carbonate electrolyte is presented. The nucleation of produced solid Li2S is compared to soluble Li2S. Dominating species are determined by comparing the Gibbs free energy of several species. We found that multiple lithiation steps occur before each Li2S detachment, preventing longer-chain polysulfide cleavage and a polysulfide shuttle. Through nucleating on the nitrogen-rich backbone of SPAN, Li2S units are stabilized by interactions with each other and with the nitrogen atoms. Experimental data show a potential drop and plateau during discharge, which is consistent with the calculated discharge profiles of SPAN with both soluble and nucleated Li2S, and hints at a direct solid-solid transition in the Li-SPAN cell during discharge when using carbonate-based electrolytes.

Electron beam-based functionalization of polymer membranes.

A new electron beam-based approach for the direct functionalization of polyethersulfone, polyvinylidene fluoride, polysulfone as well as polyacrylonitrile membranes in a one-step procedure is presented. Aqueous solutions of functional molecules were immobilized on the membrane surface by electron beam treatment. The resulting membranes show significantly increased flux and water wettability accompanied by decreased protein adsorption. Stability tests demonstrated the permanence of the modification. This new method neither requires any preceding surface functionalization nor the use of catalysts/photoinitiators or other toxic reagents. In addition, it avoids the synthesis of hydrophilic monomers/polymers, thus avoiding additional synthetic and purification steps as well as the use of organic solvents.

Fast analysis of flavonoids in plant extracts by liquid chromatography-ultraviolet absorbance detection on poly(carboxylic acid)-coated silica and electrospray ionization tandem mass spectrometric detection.

A highly hydrophilic poly(7-oxonorbornene-5,6-dicarboxylic acid-block-norbornene) [=poly-(ONDCA-b-NBE)]-coated silica was investigated for the liquid chromatographic (LC) determination of flavonoids in plant extracts of complex biological origin using UV absorbance and mass spectrometric (MS) detection. Compared to the most commonly used octadecyl derivatized silica this sorbent allowed fast separations even at extreme pH values. Furthermore, UV absorbance and MS detection were evaluated. As we found, UV detection at 254 nm allows the determination of flavonoids down to the ng range with a linearity of R2>0.9906. For the more selective characterization the validated LC system was coupled to a quadrupole ion trap mass spectrometer via an electrospray ionization (ESI) interface. MS detection showed high linearity (R2>0.9904) for all investigated flavonoids. Due to the relatively high flow-rate of 1 ml/min the limits of detection were found in the lower-microg range. Collision induced dissociation was applied to obtain characteristic fragmentation fingerprints. Finally, the validated LC-ESI-MS-MS method demonstrated that this poly-(ONDCA-b-NBE) stationary phase allows fast characterization and quantitation in onion, elderflower blossom, lime blossom, St. John's Wort and red wine.

Metathesis-based monoliths: influence of polymerization conditions on the separation of biomolecules.

Monolithic materials were prepared by transition metal-catalyzed ring-opening metathesis copolymerization of norborn-2-ene and 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene within the confines of surface-derivatized borosilicate columns in the presence of the porogenic solvents toluene and 2-propanol using Cl2(PCy3)2Ru(=CHPh) (1) as initiator. Relevant physicochemical data of the porous structure (specific surface area (sigma), pore volume (Vp), volume fraction of pores (epsilon(p)), and intermicroglobule volume (epsilon(z))) of the monolithic columns were determined by inverse size exclusion chromatography in tetrahydrofuran. Mean particle diameters were determined via electron microscopy. The influence of variations in polymerization conditions in terms of stoichiometry of the monomers and porogenic solvents on the chromatographic separation of the oligodeoxynucleotides dT12-dT18 and eight model proteins (ribonuclease A, insulin, cytochrome c, lysocyme, alpha-lactalbumin, alpha-chymotrypsinogen, beta-lactoglobulin B, catalase) were studied. Also, the role of additional phosphine on the entire polymerization setup and the associated chromatographic separations was elucidated. Relevant chromatographic data as well as differences between the separation of oligodeoxynucleotides and proteins may directly be attributed to the above-mentioned physicochemical properties of the metathesis-based monoliths. Finally, DSC-TGA-MS investigations on various monoliths of different composition and age were carried out in order to provide information on stability and oxidation behavior.

New synthetic ways for the preparation of high-performance liquid chromatography supports.

The latest developments and in particular important synthetic aspects for the preparation of modern HPLC supports are reviewed. In this context, the chemistry of inorganic supports based on silica, zirconia, titania or aluminum oxide as well as of organic supports based on poly(styrene-divinylbenzene), acrylates, methacrylates and other, more specialized polymers is covered. Special consideration is given to modern approaches such as sol-gel technology, molecular imprinting, perfusion chromatography, the preparation of monolithic separation media as well as to organic HPLC supports prepared by new polymer technologies such as ring-opening metathesis polymerization. Synthetic particularities relevant for the corresponding applications are outlined.

Evaluation of norbornene- beta-cyclodextrin-based monomers and oligomers as chiral selectors by means of nonaqueous capillary electrophoresis.

Norbornen-5-yl carboxylic acid and norbornen-5-ylmethylsilyl ether-based beta-cyclodextrins (beta-CDs) containing up to three norbornene ester and up to five norbornene silyl ether units have been prepared from beta-CD and norbornen-5-carboxylic chloride and norbornen-5-ylmethyldichlorosilane, respectively. Oligomers (n = 2-4) were prepared therefrom using ring-opening metathesis polymerization (ROMP). Monomeric and oligomeric substituted beta-CDs were evaluated as chiral selectors in nonaqueous capillary zone electrophoresis using 35 mM sodium bicarbonate in N-methylformamide (NMF) as background electrolyte. Both monomeric and oligomeric norbornene ester- and norbornene silyl ether-type selectors showed good enantioresolution for dansylated (DNS-) amino acids using concentrations of the chiral selector of up to 4% w/v. A significant improvement in resolution was observed upon the introduction of up to five norbornene silyl ether units into a beta-CD molecule, whereas higher degrees of substitution with norbornen-5-yl-carboxyl groups lead to a reduction in enantioresolution of DNS-amino acids. Thus, pentakis(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD turned out to be superior to mono(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD in terms of enantioresolution. Moreover, norbornene silyl ether-type selectors were found to be more efficient than norbornene ester-type selectors. Finally, oligomeric selectors were found to possess superior or at least comparable enantioselectivity in the separation of DNS-amino acids compared to the parent monomers. A maximum in enantioresolution was obtained with oligo(pentakis(norbornen-5-ylmethylhydroxysiloxyl)beta-CD).

Chiral beta-cyclodextrin-based polymer supports prepared via ring-opening metathesis graft-polymerization.

A series of norborn-2-ene-derivatized beta-cyclodextrins (beta-CDs), 6-O-(norborn-2-ene-5-carboxyl)-beta-CD (1), tetrakis(6-O-norborn-2-ene-5-carboxyl)-beta-CD (2), (3), 6-O-(6-norborn-2-ene-5-car-6-O-(7-oxanorborn-2-ene-5-carboxyl)-beta-CD bonylaminohexoyl)-beta-CD (4), 6-O-(norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD (5), tris(6-O-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD (6), tetrakis(6-O-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD (7) and hexakis(6-O-norborn-2-ene-5-ylmethoxymethylsilyl)-beta-CD (8), have been synthesized. Compounds 1-3 were prepared via reaction of beta-CD with norborn-2-ene-5-carboxylic chloride and 7-oxanorborn-2-ene-5-carboxylic chloride, respectively; compounds 5-8 were synthesized from norborn-2-ene-5-yl-methyldichlorosilane and beta-CD, respectively. Compound 4 was accessible by reaction of norbom-2-ene-5-carboxylaminohexoyl chloride with beta-CD. Compounds 1-8 were surface grafted onto norborn-2-ene-derivatized silica-based supports using ring-opening metathesis polymerization employing the ruthenium-based initiator bis(tricyclohexylphosphino)benzylideneruthenium dichloride [Cl2Ru(CHC6H5)(PCy3)2, Cy=cyclohexyl, 9]. Generally speaking, the resulting chiral stationary phases (CSPs) I-VIII may be prepared with high reproducibility and may be used within a pH of 2-10. Thus, relative standard deviations (sigman-1) of the mean resolution (Rs) are <7%. The CSPs were used for the enantioselective separation of beta-blockers, N-dansyl-, N-3,5-dinitrobenzoyl- and Fmoc-protected amino acids and were characterized in terms of chemical stability, selectivity (alpha') and resolution (Rs). Additionally, the role of the spacer as well as influences of capacity and the degree of substitution of the beta-CD moiety on the separation characteristics were determined.

Influences of surface chemistry on the separation behavior of stationary phases for reversed-phase and ion-exchange chromatography: a comparison of coated and grafted supports prepared by ring-opening metathesis polymerization.

A series of poly(norborn-2-ene) (poly-NBE), poly(7-oxanorborne-2-ene-5,6-dicarboxylic acid) (poly-ONDCA), as well as poly(norborn-2-ene-co-7-oxanorborne-2-ene-5,6-dicarboxylic acid) (poly-NBE-co-ONDCA) based silica supports were prepared via ring-opening metathesis polymerization (ROMP) using both coating and grafting techniques. Poly-NBE-grafted and poly-NBE-coated supports were used for the reversed-phase separation of phenols; poly-NBE, poly-ONDCA as well as poly-NBE-co-ONDCA-grafted supports were used for comparative studies on the separation of a series of anilines and lutidines. As expected, grafted supports possess superior separation capabilities compared to their coated analogues. Compared to pure poly-NBE- and poly-ONDCA-grafted stationary phases, supports consisting of poly-NBE-co-ONDCA block-copolymers possess both hydrophobic and ion-exchange sites and represent optimum stationary phases for the separation of isomeric basic analytes.

On-line cation exchange for suppression of adduct formation in negative-ion electrospray mass spectrometry of nucleic acids.

One major difficulty in the analysis of nucleic acids by electrospray mass spectrometry is represented by the affinity of the polyanionic sugar-phosphate backbone for nonvolatile cations, especially ubiquitous sodium and potassium ions. A simple on-line sample preparation system comprising a microflow pumping system and 45 x 0.8-mm-i.d. microcolumns packed with weak or strong cation-exchange resins is described for the efficient removal of cations from nucleic acid samples. Samples were analyzed by flow injection analysis at a 3-5 microL/min flow of 10 mM triethylamine in 50% water-50% acetonitrile. After on-line desalting, mass spectra of oligonucleotides revealed no significant sodium adduct peaks. Moreover, signal-to-noise ratios were greatly enhanced compared to direct injection of the samples. Electrospray mass spectrometry with on-line sample preparation allowed accurate molecular mass determinations of picomole amounts of crude oligonucleotide preparations ranging in size from 8 to 80 nucleotides within a few minutes. The good linearity of the calibration plot (R2 = 0.9988) over at least 2 orders of magnitude and a relative standard deviation in peak areas of less than 9% permitted the sensitive quantitative measurement of oligonucleotides in a concentration range of 0.2-20 microM with selected-ion monitoring. Finally, the on-line sample preparation system was evaluated for the mass spectrometric analysis of complex oligonucleotide mixtures.

Determination of airborne, volatile amines from polyurethane foams by sorption onto a high-capacity cation-exchange resin based on poly(succinic acid).

A high-capacity carboxylic acid-functionalized resin prepared by ring-opening metathesis polymerization based on cross-linked endo,endo-poly(norborn-2-ene-5,6-dicarboxylic acid) was used for the sampling of volatile, airborne amines from polyurethane (PU) foams. Six tertiary amines which represent commonly used promotors for the formation of PUs from diisocyanates and polyols, namely pentamethyldiethylenetriamine, diazabicyclooctane, N-methylmorpholine, N-ethylmorphine, 1,4-dimethylpiperazine and N,N-dimethylethanolamine, were sorbed onto the new resin. The sorption behavior of the new material was investigated in terms of loading capacities, the influence of concentration, flow-rate as well as of the amount of resin. Breakthrough curves were recorded from each single component as well as of mixtures thereof. Finally, the resin was used for the sampling of amines evaporating from PU foams applied in buildings. Further information about time dependent concentration profiles were obtained using a combination of GC-MS and Fourier transform IR spectroscopy.