ABSTRACT
In this study, CNCs were extracted from durian rind. Modification to CNCs with saponin was conducted at 50 °C for one h. CNCs and CNCs-saponin were employed as dexamethasone carriers. Modification to CNCs using saponin did not change the relative crystallinity of CNCs. CNCs' molecular structure and surface chemistry did not alter significantly after modification. Both nanoparticles have surface charges independently of pH. Dexamethasone-released kinetics were studied at two different pH (7.4 and 5.8). Higuchi, Ritger-Peppas, first-order kinetic and sigmoidal equations were used to represent the released kinetic data. The sigmoidal equation was found to be superior to other models. The CNCs and CNCs-saponin showed burst release at 30 min. The study indicated that cell viability decreased by 30% after modification with saponin.
ABSTRACT
The fast depletion of fossil fuels has attracted researchers worldwide to explore alternative biofuels, such as biodiesel. In general, the production of biodiesel is carried out via transesterification processes of vegetable oil with the presence of a suitable catalyst. A mixed metal oxide has shown to be a very attractive heterogeneous catalyst with a high performance. Most of the mixed metal oxide is made by using the general wetness impregnation method. A simple route to synthesize silane-modified mixed metal oxide (CaO-CuO/C6) catalysts has been successfully developed. A fluorocarbon surfactant and triblock copolymers (EO)106(PO)70(EO)106 were used to prevent the crystal agglomeration of carbonate salts (CaCO3-CuCO3) as the precursor to form CaO-CuO with a definite size and morphology. The materials show high potency as a catalyst in the transesterification process to produce biodiesel. The calcined co-precipitation product has a high crystallinity form, as confirmed by the XRD analysis. The synthesized catalyst was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The mechanism of surface modification and the effects of the catalytic activity were also discussed. The biodiesel purity of the final product was analyzed by gas chromatography. The optimum biodiesel yield was 90.17% using the modified mixed metal oxide CaO-CuO/C6.
ABSTRACT
In this paper, we report the successful synthesis of amine-functionalized FDU-12-type mesoporous silica with a very large pore (30.2 nm) and a highly ordered mesostructure by using 3-aminopropyltriethoxysilane (APTES) as an organosilane source. Small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) measurements confirmed that the materials possessed a face-centered cubic (space group Fm3m) mesostructure. Different techniques were used to obtain a significant pore and entrance size enlargement: low synthesis temperature and high hydrothermal treatment temperature. The amount of amine organosilane influenced the mesostructure of the mesoporous silica. It was found that the addition of inorganic salt (KCl) could help to maintain an ordered structure of the large pore mesoporous material. X-ray photoelectron spectroscopy (XPS), solid-state magic-angle spinning (MAS) 13C nuclear magnetic resonance (NMR) and thermogravimetric analysis (TGA) verified the incorporation of amine functional groups on the surface of the materials. The addition of amine organosilane extended the synthesis temperature domain of ordered FDU-12 materials. The amine functional group significantly enhanced the adsorption capacity of the mesoporous materials, e.g., the amine functionalized mesoporous silica had 8-fold higher bovine serum albumin (BSA) adsorption capacity than that of the unfunctionalized one. It also had 2 times higher adsorption capacity for large cellulase enzymes. The amine functional group introduced positively charged groups on the surface of the mesoporous silica, which created strong electrostatic interactions between the protein and the silica.
