Finite size effects on the metamagnetic phase transition in a thick B2 FeRh nanocluster film.

FeRh alloys in the CsCl-type (B2) chemically ordered phase present an antiferromagnetic to ferromagnetic order transition around 370 K observed in bulk and continuous films but absent in nanoclusters. In this study, we investigate the thermal magnetic behavior of a thick film composed of assembled FeRh nanoclusters preformed in the gas phase. This work reveals a broad and asymmetric metamagnetic transition with a consequent residual magnetization at low temperature. Due to the coexistence of different grain sizes in the sample, we confront the results with a description that involves two populations of B2-FeRh particles, and the existence of a discriminating size below which the magnetic order transition does not take place.

Enhanced Light Trapping in GaAs/TiO2-Based Photocathodes for Hydrogen Production.

Photoelectrochemical cells (PEC) are appealing devices for the production of renewable energy carriers. In this context, III-V semiconductors such as GaAs are very promising materials due to their tunable band gaps, which can be appropriately adjusted for sunlight harvesting. Because of the high cost of these semiconductors, the nanostructuring of the photoactive layer can help to improve the device efficiency as well as drastically reduce the amount of material needed. III-V nanowire-based photoelectrodes benefit from the intrinsically high aspect ratio of nanowires, their enhanced ability to trap light, and their improved charge separation and collection abilities and thus are particularly attractive for PECs. However, III-V semiconductors often suffer from corrosion in aqueous electrolytes, preventing their utilization over long periods under relevant working conditions. Here, photocathodes of GaAs nanowires protected with thin TiO2 shells were prepared and studied under simulated sunlight irradiation to assess their photoelectrochemical performances in correlation with their structural degradation, highlighting the advantageous nanowire geometry compared to its thin-film counterpart. Morphological and electronic parameters, such as the aspect ratio of the nanowires and their doping pattern, were found to strongly influence the photocatalytic performances of the system. This work highlights the advantageous combination of nanowires featuring a buried radial p-n junction with Co nanoparticles used as a hydrogen evolution catalyst. The nanostructured photocathodes exhibit significant photocatalytic activities comparable with previous noble-metal-based systems. This study demonstrates the potential of a GaAs nanostructured semiconductor and its reliable use for photodriven hydrogen production.

Crystal Growth Mechanisms of BiFeO3 Nanoparticles.

A wet-chemical synthesis process was designed to obtain reproducible single-phase multiferroic BiFeO3 nanoparticles. The phase purity, single crystallinity, and size of the nanoparticles are confirmed through the analysis of X-ray diffraction patterns, Raman spectroscopy, and high resolution transmission electron microscopy experiments. Crystal nucleation happens within the amorphous-rich area in multiple seeds, leading to the formation of single crystalline nanoparticles with no preferential faceting. Crystallization mechanisms of BiFeO3 nanoparticles were investigated following the Kissinger-Akahira-Sunose approach, indicating that two crystallization steps are responsible of the complete BiFeO3 nanoparticle formation. The first crystallization step involves a maximum of 70% of the final crystal volume, arising from nanocrystal nucleation and growth. The second step occurs above this threshold crystal volume fraction, and it is related to the nanocrystallite coalescence process. Analysis of the thermodynamic process of the crystallization of BiFeO3 nanoparticles following Ostwald rules suggests a relatively low energy barrier for crystal nucleation, highlighting that phase pure, single crystalline BiFeO3 nanoparticles are obtained using the present optimized wet-chemical synthesis process, with temperatures as low as 450 °C.

Atmosphere-dependent stability and mobility of catalytic Pt single atoms and clusters on γ-Al2O3.

Atomically dispersed metals promise the ultimate catalytic efficiency, but their stabilization onto suitable supports remains challenging owing to their aggregation tendency. Focusing on the industrially-relevant Pt/γ-Al2O3 catalyst, in situ X-ray absorption spectroscopy and environmental scanning transmission electron microscopy allow us to monitor the stabilization of Pt single atoms under O2 atmosphere, as well as their aggregation into mobile reduced subnanometric clusters under H2. Density functional theory calculations reveal that oxygen from the gas phase directly contributes to metal-support adhesion, maximal for single Pt atoms, whereas hydrogen only adsorbs on Pt, and thereby leads to Pt clustering. Finally, Pt cluster mobility is shown to be activated at low temperature and high H2 pressure. Our results highlight the crucial importance of the reactive atmosphere on the stability of single-atom versus cluster catalysts.

Shape-selective synthesis of nanoceria for degradation of paraoxon as a chemical warfare simulant.

Repeated attacks using organophosphorus compounds, in military conflicts or terrorist acts, necessitate developing inexpensive and readily available decontamination systems. Nanosized cerium oxide is a suitable candidate, acting as a heterogeneous catalyst for the degradation of organophosphorus compounds such as VX agent or sarin. However, the reaction mechanism of the phosphatase mimetic activity of CeO2 nanoparticles is not fully described. Adsorption, surface-promoted hydrolysis, and desorption cycles strongly depend on the physico-chemical characteristics of the facets. In this study, CeO2 nanoparticles with different shapes were elaborated by hydrothermal synthesis. Nano-octahedra, nanocubes, or nanorods were selectively obtained under different conditions (temperature, concentration and nature of the precursors). The degradation activity according to the crystal faces was evaluated in vitro by measuring the degradation kinetics of paraoxon organophosphate in the presence of CeO2 nanoparticles. The results show an influence of both specific surface area and crystal faces of the nanoparticles, with higher activity for {111} facets compared to {100} facets at 32 °C. The relative activity between the facets is ascribed to the adsorption probability, assuming coordination between the phosphoryl oxygen and cerium atoms, but also to the surface density of the Ce doublets with relevant spacing for phosphatase mimetic activity.

Intracellular Biodegradation of Ag Nanoparticles, Storage in Ferritin, and Protection by a Au Shell for Enhanced Photothermal Therapy.

Despite their highly efficient plasmonic properties, gold nanoparticles are currently preferred to silver nanoparticles for biomedical applications such as photothermal therapy due to their high chemical stability in the biological environment. To confer protection while preserving their plasmonic properties, we allied the advantages of both materials and produced hybrid nanoparticles made of an anisotropic silver nanoplate core coated with a frame of gold. The efficiency of these hybrid nanoparticles (Ag@AuNPs) in photothermia was compared to monometallic silver nanoplates (AgNPs) or gold nanostars (AuNPs). The structural and functional properties of AuNPs, AgNPs, and Ag@AuNPs were investigated in environments of increasing complexity, in water suspensions, in cells, and in tumors in vivo. While AgNPs showed the greatest heating efficiency in suspension (followed by Ag@AuNPs and AuNPs), this trend was reversed intracellularly within a tissue-mimetic model. In this setup, AgNPs failed to provide consistent photothermal conversion over time, due to structural damage induced by the intracellular environment. Remarkably, the degraded Ag was found to be stored within the iron-storage ferritin protein. By contrast, the Au shell provided the Ag@AuNPs with total Ag biopersistence. As a result, photothermal therapy was successful with Ag@AuNPs in vivo in a mouse tumor model, providing the ultimate proof on Au shell's capability to shield the Ag core from the harsh biological environment and preserve its excellent heating properties.

Three-Dimensional Self-Organization in Nanocomposite Layered Systems by Ultrafast Laser Pulses.

Controlling plasmonic systems with nanometer resolution in transparent films and their colors over large nonplanar areas is a key issue for spreading their use in various industrial fields. Using light to direct self-organization mechanisms provides high-speed and flexible processes to meet this challenge. Here, we describe a route for the laser-induced self-organization of metallic nanostructures in 3D. Going beyond the production of planar nanopatterns, we demonstrate that ultrafast laser-induced excitation combined with nonlinear feedback mechanisms in a nanocomposite thin film can lead to 3D self-organized nanostructured films. The process, which can be extended to complex layered composite systems, produces highly uniform large-area nanopatterns. We show that 3D self-organization originates from the simultaneous excitation of independent optical modes at different depths in the film and is activated by the plasmon-induced charge separation and thermally induced NP growth mechanisms. This laser color marking technique enables multiplexed optical image encoding and the generated nanostructured Ag NPs:TiO2 films offer great promise for applications in solar energy harvesting, photocatalysis, or photochromic devices.

Real-space mapping of electronic orbitals.

Electronic states are responsible for most material properties, including chemical bonds, electrical and thermal conductivity, as well as optical and magnetic properties. Experimentally, however, they remain mostly elusive. Here, we report the real-space mapping of selected transitions between p and d states on the Ångström scale in bulk rutile (TiO2) using electron energy-loss spectrometry (EELS), revealing information on individual bonds between atoms. On the one hand, this enables the experimental verification of theoretical predictions about electronic states. On the other hand, it paves the way for directly investigating electronic states under conditions that are at the limit of the current capabilities of numerical simulations such as, e.g., the electronic states at defects, interfaces, and quantum dots.

Spatially resolved surface valence gradient and structural transformation of lithium transition metal oxides in lithium-ion batteries.

Layered lithium transition metal oxides are one of the most important types of cathode materials in lithium-ion batteries (LIBs) that possess high capacity and relatively low cost. Nevertheless, these layered cathode materials suffer structural changes during electrochemical cycling that could adversely affect the battery performance. Clear explanations of the cathode degradation process and its initiation, however, are still under debate and not yet fully understood. We herein systematically investigate the chemical evolution and structural transformation of the LiNixMnyCo1-x-yO2 (NMC) cathode material in order to understand the battery performance deterioration driven by the cathode degradation upon cycling. Using high-resolution electron energy loss spectroscopy (HR-EELS) we clarify the role of transition metals in the charge compensation mechanism, particularly the controversial Ni2+ (active) and Co3+ (stable) ions, at different states-of-charge (SOC) under 4.6 V operation voltage. The cathode evolution is studied in detail from the first-charge to long-term cycling using complementary diagnostic tools. With the bulk sensitive 7Li nuclear magnetic resonance (NMR) measurements, we show that the local ordering of transition metal and Li layers (R3[combining macron]m structure) is well retained in the bulk material upon cycling. In complement to the bulk measurements, we locally probe the valence state distribution of cations and the surface structure of NMC particles using EELS and scanning transmission electron microscopy (STEM). The results reveal that the surface evolution of NMC is initiated in the first-charging step with a surface reduction layer formed at the particle surface. The NMC surface undergoes phase transformation from the layered structure to a poor electronic and ionic conducting transition-metal oxide rock-salt phase (R3[combining macron]m → Fm3[combining macron]m), accompanied by irreversible lithium and oxygen loss. In addition to the electrochemical cycling effect, electrolyte exposure also shows non-negligible influence on cathode surface degradation. These chemical and structural changes of the NMC cathode could contribute to the first-cycle coulombic inefficiency, restrict the charge transfer characteristics and ultimately impact the cell capacity.

Real-space localization and quantification of hole distribution in chain-ladder Sr3Ca11Cu24O41 superconductor.

Understanding the physical properties of the chain-ladder Sr3Ca11Cu24O41 hole-doped superconductor has been precluded by the unknown hole distribution among chains and ladders. We use electron energy-loss spectrometry (EELS) in a scanning transmission electron microscope (STEM) at atomic resolution to directly separate the contributions of chains and ladders and to unravel the hole distribution from the atomic scale variations of the O-K near-edge structures. The experimental data unambiguously demonstrate that most of the holes lie within the chain layers. A quantitative interpretation supported by inelastic scattering calculations shows that about two holes are located in the ladders, and about four holes in the chains, shedding light on the electronic structure of Sr3Ca11Cu24O41. Combined atomic resolution STEM-EELS and inelastic scattering calculations is demonstrated as a powerful approach toward a quantitative understanding of the electronic structure of cuprate superconductors, offering new possibilities for elucidating their physical properties.

Surface Segregation of Fe in Pt-Fe Alloy Nanoparticles: Its Precedence and Effect on the Ordered-Phase Evolution during Thermal Annealing.

Coupling electron microscopy techniques with in situ heating ability allows us to study phase transformations on the single-nanoparticle level. We exploit this setup to study disorder-to-order transformation of Pt-Fe alloy nanoparticles, a material that is of great interest to fuel-cell electrocatalysis and ultrahigh density information storage. In contrast to earlier reports, we show that Fe (instead of Pt) segregates towards the particle surface during annealing and forms a Fe-rich FeO x outer shell over the alloy core. By combining both ex situ and in situ approaches to probe the interplay between ordering and surface-segregation phenomena, we illustrate that the surface segregation of Fe precedes the ordering process and affects the ordered phase evolution dramatically. We show that the ordering initiates preferably at the pre-existent Fe-rich shell than the particle core. While the material-specific findings from this study open interesting perspectives towards a controlled phase evolution of Pt-Fe nanoalloys, the characterization methodologies described are general and should prove useful to probing a wide-range of nanomaterials.

Atomic Ordering in InGaN Alloys within Nanowire Heterostructures.

Ternary III-nitride based nanowires (NWs) are promising for optoelectronic applications by offering advantageous design and control over composition, structure, and strain. Atomic-level chemical ordering in wurtzite InGaN alloys along the c-plane direction with a 1:1 periodicity within InGaN/GaN NW heterostructures was investigated by scanning transmission electron microscopy. Atomic-number-sensitive imaging contrast was used to simultaneously assign the In-rich and Ga-rich planes and determine the crystal polarity to differentiate unique sublattice sites. The nonrandom occupation of the c-planes in the InGaN alloys is confirmed by the occurrence of additional superlattice spots in the diffraction pattern within the ternary alloy. Compositional modulations in the ordered InGaN was further studied using atomic-resolution elemental mapping, outlining the substantial In-enrichment. Confirming the preferential site occupation of In-atoms provides experimental validation for the previous theoretical model of ordered InGaN alloys in bulk epilayers based on differences in surface site energy. Therefore, this study strongly suggests that atomic ordering in InGaN has a surface energetics-induced origin. Optimization of atomic ordering, in particular in III-nitride NW heterostructures, could be an alternative design tool toward desirable structural and compositional properties for various device applications operating at longer visible wavelengths.

The origin of anisotropy and high density of states in the electronic structure of Cr2GeC by means of polarized soft x-ray spectroscopy and ab initio calculations.

The anisotropy in the electronic structure of the inherently nanolaminated ternary phase Cr2GeC is investigated by bulk-sensitive and element selective soft x-ray absorption/emission spectroscopy. The angle-resolved absorption/emission measurements reveal differences between the in-plane and out-of-plane bonding at the (0001) interfaces of Cr2GeC. The Cr L(2, 3), C K, and Ge M1, M(2, 3) emission spectra are interpreted with first-principles density-functional theory (DFT) including core-to-valence dipole transition matrix elements. For the Ge 4s states, the x-ray emission measurements reveal two orders of magnitude higher intensity at the Fermi level than DFT within the General Gradient Approximation (GGA) predicts. We provide direct evidence of anisotropy in the electronic structure and the orbital occupation that should affect the thermal expansion coefficient and transport properties. As shown in this work, hybridization and redistribution of intensity from the shallow 3d core levels to the 4s valence band explain the large Ge density of states at the Fermi level.

Strained lattice with persistent atomic order in Pt3Fe2 intermetallic core-shell nanocatalysts.

Fine-tuning nanocatalysts to enhance their catalytic activity and durability is crucial to commercialize proton exchange membrane fuel cells. The structural ordering and time evolution of ordered Pt3Fe2 intermetallic core-shell nanocatalysts for the oxygen reduction reaction that exhibit increased mass activity (228%) and an enhanced catalytic activity (155%) compared to Pt/C has been quantified using aberration-corrected scanning transmission electron microscopy. These catalysts were found to exhibit a static core-dynamic shell regime wherein, despite treating over 10,000 cycles, there is negligible decrease (9%) in catalytic activity and the ordered Pt3Fe2 core remained virtually intact while the Pt shell suffered a continuous enrichment. The existence of this regime was further confirmed by X-ray diffraction and the compositional analyses using energy-dispersive spectroscopy. With atomic-scale two-dimensional (2-D) surface relaxation mapping, we demonstrate that the Pt atoms on the surface are slightly relaxed with respect to bulk. The cycled nanocatalysts were found to exhibit a greater surface relaxation compared to noncycled catalysts. With 2-D lattice strain mapping, we show that the particle was about -3% strained with respect to pure Pt. While the observed enhancement in their activity is ascribed to such a strained lattice, our findings on the degradation kinetics establish that their extended catalytic durability is attributable to a sustained atomic order.