Fully Spin-Transparent Magnetic Interfaces Enabled by the Insertion of a Thin Paramagnetic NiO Layer.

Spin backflow and spin-memory loss have been well established to considerably lower the interfacial spin transmissivity of metallic magnetic interfaces and thus the energy efficiency of spin-orbit torque technologies. Here, we report that spin backflow and spin-memory loss at Pt-based heavy metal-ferromagnet interfaces can be effectively eliminated by inserting an insulating paramagnetic NiO layer of optimum thickness. The latter enables the thermal magnon-mediated essentially unity spin-current transmission at room temperature due to considerably enhanced effective spin-mixing conductance of the interface. As a result, we obtain dampinglike spin-orbit torque efficiency per unit current density of up to 0.8 as detected by the standard technology ferromagnet FeCoB and others, which reaches the expected upper-limit spin Hall ratio of Pt. We establish that Pt/NiO and Pt-Hf/NiO are two energy-efficient, integration-friendly, and high-endurance spin-current generators that provide >100 times greater energy efficiency than sputter-deposited topological insulators BiSb and BiSe. Our finding will benefit spin-orbitronic research and advance spin-torque technologies.

Effects of Anisotropic Strain on Spin-Orbit Torque Produced by the Dirac Nodal Line Semimetal IrO2.

We report spin-torque ferromagnetic resonance studies of the efficiency of the damping-like (ξDL) spin-orbit torque exerted on an adjacent ferromagnet film by current flowing in epitaxial (001) and (110) IrO2 thin films. IrO2 possesses Dirac nodal lines (DNLs) in the band structure that are gapped by spin-orbit coupling, which could enable a very high spin Hall conductivity, σSH. We find that the (001) films do exhibit exceptionally high ξDL ranging from 0.45 at 293 K to 0.65 at 30 K, which sets the lower bounds of σSH to be 1.9 × 105 and 3.75 × 105 Ω-1 m-1, respectively, 10 times higher and of opposite sign than the theoretical prediction. Furthermore, ξDL and σSH are substantially reduced in anisotropically strained (110) films. We suggest that this high sensitivity to anisotropic strain is because of changes in contributions to σSH near the DNLs.

Manipulation of the van der Waals Magnet Cr2Ge2Te6 by Spin-Orbit Torques.

We report measurements of current-induced thermoelectric and spin-orbit torque effects within devices in which multilayers of the semiconducting two-dimensional van der Waals magnet Cr2Ge2Te6 (CGT) are integrated with Pt and Ta metal overlayers. We show that the magnetic orientation of the CGT can be detected accurately either electrically (using an anomalous Hall effect) or optically (using magnetic circular dichroism) with good consistency. The samples exhibit large thermoelectric effects, but nevertheless, the spin-orbit torque can be measured quantitatively using the angle-dependent second harmonic Hall technique. For CGT/Pt, we measure the spin-orbit torque efficiency to be similar to conventional metallic-ferromagnet/Pt devices with the same Pt resistivity. The interfacial transparency for spin currents is therefore similar in both classes of devices. Our results demonstrate the promise of incorporating semiconducting 2D magnets within spin-orbitronic and magneto-thermal devices.

Cryogenic Memory Architecture Integrating Spin Hall Effect based Magnetic Memory and Superconductive Cryotron Devices.

One of the most challenging obstacles to realizing exascale computing is minimizing the energy consumption of L2 cache, main memory, and interconnects to that memory. For promising cryogenic computing schemes utilizing Josephson junction superconducting logic, this obstacle is exacerbated by the cryogenic system requirements that expose the technology's lack of high-density, high-speed and power-efficient memory. Here we demonstrate an array of cryogenic memory cells consisting of a non-volatile three-terminal magnetic tunnel junction element driven by the spin Hall effect, combined with a superconducting heater-cryotron bit-select element. The write energy of these memory elements is roughly 8 pJ with a bit-select element, designed to achieve a minimum overhead power consumption of about 30%. Individual magnetic memory cells measured at 4 K show reliable switching with write error rates below 10-6, and a 4 × 4 array can be fully addressed with bit select error rates of 10-6. This demonstration is a first step towards a full cryogenic memory architecture targeting energy and performance specifications appropriate for applications in superconducting high performance and quantum computing control systems, which require significant memory resources operating at 4 K.

Effective Spin-Mixing Conductance of Heavy-Metal-Ferromagnet Interfaces.

The effective spin-mixing conductance (G_{eff}^{↑↓}) of a heavy-metal-ferromagnet (HM-FM) interface characterizes the efficiency of the interfacial spin transport. Accurately determining G_{eff}^{↑↓} is critical to the quantitative understanding of measurements of direct and inverse spin Hall effects. G_{eff}^{↑↓} is typically ascertained from the inverse dependence of magnetic damping on the FM thickness under the assumption that spin pumping is the dominant mechanism affecting this dependence. We report that this assumption fails badly in many in-plane magnetized prototypical HM-FM systems in the nanometer-scale thickness regime. Instead, the majority of the damping is from two-magnon scattering at the FM interface, while spin-memory-loss scattering at the interface can also be significant. If these two effects are neglected, the results will be an unphysical "giant" apparent G_{eff}^{↑↓} and hence considerable underestimation of both the spin Hall ratio and the spin Hall conductivity in inverse or direct spin Hall experiments.

Variation of the giant intrinsic spin Hall conductivity of Pt with carrier lifetime.

More than a decade after the first theoretical and experimental studies of the spin Hall conductivity (SHC) of Pt, both its dominant origin and amplitude remain in dispute. We report the experimental determination of the rapid variation of the intrinsic SHC of Pt with the carrier lifetime (τ) in the dirty-metal regime by incorporating finely dispersed MgO intersite impurities into the Pt, while maintaining its essential band structure. This conclusively validates the theoretical prediction that the SHC in Pt in the dirty-metal regime should be dominated by the intrinsic contribution, and should decrease rapidly with shortening τ. When interfacial spin backflow is taken into account, the intrinsic SHC of Pt in the clean limit is at least 1.6 × 106 (ℏ/2e) ohm-1 m-1, more than 3.5 times greater than the available theoretical predictions. Our work also establishes a compelling spin Hall metal Pt0.6(MgO)0.4 with an internal giant spin Hall ratio of 0.73.

Exceptionally High, Strongly Temperature Dependent, Spin Hall Conductivity of SrRuO3.

Spin-orbit torques (SOT) in thin film heterostructures originate from strong spin-orbit interactions (SOI) that, in the bulk, generate a spin current due either to extrinsic spin-dependent, skew, or/and side-jump scattering or to intrinsic Berry curvature in the conduction bands. While most SOT studies have focused on materials with heavy metal components, the oxide perovskite SrRuO3 has been predicted to have a pronounced Berry curvature. Through quantification of its spin current by the SOT exerted on an adjacent Co ferromagnetic layer, we determine that SrRuO3 has a strongly temperature ( T)-dependent spin Hall conductivity σ SH, increasing with the electrical conductivity, consistent with expected behavior of the intrinsic effect in the "dirty metal" regime. σ SH is very high at low T, e.g., σ SH > (ℏ/2 e)3 × 105 Ω-1 m-1 at 60 K, and is largely unaffected by the SrRuO3 ferromagnetic transition at T c ≈ 150 K, which agrees with a recent theoretical determination that the intrinsic spin Hall effect is magnetization independent. Below T c smaller nonstandard SOT components also develop associated with the magnetism of the oxide. Our results are consistent with the degree of RuO6 octahedral tilt being correlated with the strength of the SOI in this complex oxide, as predicted by recent theoretical work on strontium iridate. These results establish SrRuO3 as a very promising candidate material for implementing strong spintronics functionalities in oxide electronics.

Current-Induced Torques with Dresselhaus Symmetry Due to Resistance Anisotropy in 2D Materials.

We report measurements of current-induced torques in heterostructures of Permalloy (Py) with TaTe2, a transition-metal dichalcogenide (TMD) material possessing low crystal symmetry, and observe a torque component with Dresselhaus symmetry. We suggest that the dominant mechanism for this Dresselhaus component is not a spin-orbit torque but rather the Oersted field arising from a component of current that flows perpendicular to the applied voltage due to resistance anisotropy within the TaTe2. This type of transverse current is not present in wires made from a single uniform layer of a material with resistance anisotropy but will result whenever a material with resistance anisotropy is integrated into a heterostructure with materials having different resistivities, thereby producing a spatially nonuniform pattern of current flow. This effect will therefore influence measurements in a wide variety of heterostructures incorporating 2D TMD materials and other materials with low crystal symmetries.