ABSTRACT
The improper disposal of plastics is a growing concern due to increasing global environmental problems such as the rise of CO2 emissions, diminishing petroleum sources, and pollution, which necessitates the research and development of biodegradable materials as an alternative to conventional packaging materials. The purpose of this research was to analyse the properties of biodegradable polymer blends of thermoplastic potato starch (TPS) and polylactide, (PLA) without and with the addition of citric acid (CA) as a potential compatibilizer and plasticizer. The prepared blends were subjected to a comprehensive physicochemical characterization, which included: FTIR-ATR spectroscopy, morphological analysis by scanning electron microscopy (SEM), determination of thermal and mechanical properties by differential scanning calorimetry (DSC), water vapour permeability (WVP), as well as biodegradation testing in soil. The obtained results indicate an improvement in adhesion between the TPS and PLA phases due to the addition of citric acid, better homogeneity of the structure, and greater compatibility of the polymer blends, leading to better thermal, mechanical and barrier properties of the studied biodegradable TPS/PLA polymer blends. After conducting the comprehensive research outlined in this paper, it has been determined that the addition of 5 wt.% of citric acid serves as an effective compatibilizer and plasticizer. This supplementation achieves an optimal equilibrium across thermal, mechanical, morphological, and barrier properties, while also promoting material sustainability through biodegradation. In conclusion, it can be stated that the use of thermoplastic starch in TPS/PLA blends accelerates the biodegradation of PLA as a slowly biodegradable polymer. While the addition of citric acid offers significant advantages for TPS/PLA blends, further research is needed to optimize the formulation and processing parameters to achieve the desired balance between mechanical strength, thermal and barrier properties and biodegradability.
ABSTRACT
Bio-based composites are increasingly used. One of the most frequently used materials is hemp shives, which is agricultural waste. However, as the quantities of this material are lacking, there is a tendency towards finding new and more available materials. Corncob and sawdust are bio by-products that have great potential as insulation materials. In order to use these aggregates, it is necessary to examine their characteristics. New composite materials based on sawdust, corncobs, styrofoam granules, and the mixture of lime and gypsum as the binder were tested in this research. This paper presents the properties of these composites obtained by determining the porosity of samples, volume mass, water absorption, airflow resistance and heat flux, which was followed by the calculation of the thermal conductivity coefficient. Three of the new biocomposite materials, whose samples were 1-5 cm thick for each type of mixture, were investigated. The aim of this research was to analyze the results of different mixtures and sample thicknesses in order to determine the optimum composite material of the proper thickness so that the best possible thermal and sound insulation could be obtained. Based on the conducted analyses, the biocomposite with a thickness of 5 cm, composed of ground corncobs, styrofoam, lime, and gypsum, proved to be the best in terms of thermal and sound insulation. New composite materials can be used as an alternative to conventional materials.
ABSTRACT
The development of coatings that maintain the attractive natural appearance of wood while providing ultraviolet (UV) protection is extremely important for the widespread use of wood products. In this study, the influence of different types (powder form and aqueous dispersions) of TiO2 in an amount of 1.0 wt% by monomer weight on the properties of environmentally friendly polyacrylate (PA)/TiO2 emulsions prepared by ex situ and in situ polymerization, as well as on the UV-protective properties of the coating films, was investigated. The results showed that the addition of TiO2 significantly affected the particle size distribution of PA and the viscosity of PA varied according to the preparation method. Compared with the ex situ preparation method, in situ polymerization provides better dispersibility of TiO2 nanoparticles in PA coating film, as well as a better UV protection effect and greater transparency of the coating films. Better morphology and transparency of nanocoating films were achieved by adding TiO2 nanofillers in aqueous dispersion as compared to the addition of TiO2 in powder form. An increase in the glass transition temperature during UV exposure associated with cross-linking in the polymer was less pronounced in the in situ-prepared coating films, confirming better UV protection, while the photocatalytic effect of TiO2 was more pronounced in the ex situ-prepared coating films. The results indicate that the method of preparation has a significant influence on the properties of the coating films.
ABSTRACT
A sustainable use of locally available wastes from agriculture as supplementary cementitious materials (SCMs) is an alternative solution for the prevention of excessive raw material usage, reduction of CO2 emission and cost-effective concrete production. This paper studies the reactivity of non-traditional waste SCMs: Wheat straw ash (WSA), mixture of wheat and soybean straw ash (WSSA) and soybean straw ash (SSA), which are abundant as agricultural by-products in Serbia. The chemical evaluation using XRF technique, thermal analysis (TGA/DSC), XRD and FTIR methods were performed along with physical properties tests to investigate the feasibility of utilizing biomass ashes as cement substitutes. The obtained results demonstrate a high pozzolanic activity of WSA, which is attributed to a high reactive silica content of the ash and its satisfactory level of fineness. A wider hump in XRD pattern of WSA compared to WSSA and SSA confirmed that it abounds in amorphous (reactive) phase. The insufficient activity index of soybean-based biomass ashes, characterized with a low silica content, was improved by additional grinding and/or blending with amorphous silica-rich material. This points out the mechanical activation, i.e., grinding procedure, and chemical activation, i.e., modification of the chemical composition, as techniques efficient at producing pozzolanic materials from biomass wastes. Tested biomass ashes are characterized with negligible leaching values of heavy metals, thereby satisfying eco-friendly principles of SCM utilization. The application of biomass ashes as SCMs leads to substantial cost savings, as well as benefits to the environment, such as lower consumption of cement, reduction of CO2 emissions during the production of cement and sustainable waste management.
ABSTRACT
Non-isothermal thermogravimetry in an inert atmosphere was used to investigate the thermal stability of poly(e-caprolactone) (PCL), polylactide (PLA), thermoplastic starch (TPS) and their binary (PCL/PLA,PCL/TPS andPLA/TPS) and ternary (PCL/PLA/TPS) blends. All investigated blends were prepared by Brabender kneading chamber. A two-stage degradation pattern is seen in the case ofPCL, whilePLAexhibits only single stage degradation. On the other hand, the degradation of neat TPS proceeds through three degradation stages. It was found that addition ofPLAaffects the degradation ofPCL/PLAblends indicatingPLA's destabilising effect onPCL. TPS addition thermally destabilizes both,PCLandPLA, but notably thePCLsample. Likewise, that addition of TPS thermally destabilized all investigated ternary blends. The obtained data were used for the kinetic analysis of the degradation process. By using the isoconversional Friedman method and the multivariate nonlinear regression method kinetic analysis was performed. Kinetic analysis revealed the complexity of the thermal degradation process for neat samples and all investigated blends. Kinetic parameters (activation energy, pre-exponential factor and kinetic model) for each degradation stage of neat samples and all investigated blends were calculated.
ABSTRACT
The aim of this research is to evaluate the thermogravimetric behaviour of roadside grass and its digestate obtained from mesophilic anaerobic mono-digestion by quantifying its impacts on biomass composition and properties. Thermogravimetric measurements were conducted in a laboratory furnace under nitrogen flowrate of 100â¯mL/min in the temperature range from 35 to 800⯰C at five different heating rates of 2.5, 5, 10, 15 and 20⯰C/min. Friedman and Kissinger-Akahira-Sunose differential and integral isoconversional models were applied to determine the distributions of activation energies and modified pre-exponential factors per reacted mass (degree of conversion). The investigation demonstrated that anaerobic digestion of roadside grass can be used to generate biochar-richer material (with significantly greater yield of final residues after pyrolysis) with less energy required for subsequent pyrolysis in comparison with raw roadside grass.
