Development of novel pyrimidine nucleoside analogs as potential anticancer agents: Synthesis, characterization, and In-vitro evaluation against pancreatic cancer.

The present study proposed modification of 5-FU by conjugation with an acyl chloride and a 5-membered heterocyclic ring to improve its in-vitro cytotoxicity and metabolic stability. XYZ-I-71 and XYZ-I-73 were synthesized by introducing a tetrahydrofuran ring on 5-fluorocytosine (a precursor of 5-FU) and conjugation with octanoyl chloride and lauroyl chloride, respectively. The structure of the synthesized compounds was validated using NMR and micro-elemental analysis. The antiproliferative activity of the analogs was determined against MiaPaCa-2, PANC-1, and BxPC-3 pancreatic cancer cells. The analog's stability in human liver microsomes was quantified by HPLC. We found that the XYZ-I-73 (IC50 3.6 ± 0.4 µM) analog was most effective against MiaPaCa-2 cells compared to XYZ-I-71(IC50 12.3 ± 1.7 µM), GemHCl (IC50 24.2 ± 1.3 µM), Irinotecan (IC50 10.1 ± 1.5 µM) and 5-FU (IC50 13.2 ± 1.1 µM). The antiproliferative effects of this analog in Miapaca-2 cells is evident based on it having a 7-fold,3-fold, and 4-fold increased cytotoxic effect over Gem-HCl, Irinotecan, and 5-FU, respectively. On the other hand, XYZ-I-71 exhibited a 2-fold increased cytotoxic effect over Gem-HCl but a comparable cytotoxic effect to 5-FU and Irinotecan in MiaPaCa-2 cells. A similar trend of higher XYZ-I-73 inhibition was observed in PANC-1 and BxPC-3 cultures. For 48-h MiaPaCa-2 cell migration studies, XYZ-I-73 (5 µM) significantly reduced migration (# of migrated cells, 168 ± 2.9), followed by XYZ-I-71(315±2.1), Gem-HCl (762±3.1) and 5-FU (710 ± 3.2). PARP absorbance studies demonstrated significant inhibition of PARP expression of XYZ-I-73 treated cells compared to 5-FU, GemHCl, and XYZ-I-71. Further, BAX and p53 expressions were significantly increased in cells treated with XYZ-I-73 compared to 5-FU, GemHCl, and XYZ-I-71. In-vitro, metabolic stability studies showed that 80 ± 5.9% of XYZ-I-71 and XYZ-I-73 remained intact after 2 h exposure in liver microsomal solution compared to 5-FU. The XYZ-I-73 analog demonstrated a remarkable cytotoxic effect and improved in-vitro metabolic stability over the selected standard drugs and may have potential anticancer activity against pancreatic cancer.

Biological evaluation of novel gemcitabine analog in patient-derived xenograft models of pancreatic cancer.

Gemcitabine (Gem) has been a standard first-line drug for pancreatic cancer (PCa) treatment; however, Gem's rapid metabolism and systemic instability (short half-life) limit its clinical outcome. The objective of this study was to modify Gem into a more stable form called 4-(N)-stearoyl-gemcitabine (4NSG) and evaluate its therapeutic efficacy in patient-derived xenograft (PDX) models from PCa of Black and White patients.Methods 4NSG was synthesized and characterized using nuclear magnetic resonance (NMR), elemental analysis, and high-performance liquid chromatography (HPLC). 4NSG-loaded solid lipid nanoparticles (4NSG-SLN) were developed using the cold homogenization technique and characterized. Patient-derived pancreatic cancer cell lines labeled Black (PPCL-192, PPCL-135) and White (PPCL-46, PPCL-68) were used to assess the in vitro anticancer activity of 4NSG-SLN. Pharmacokinetics (PK) and tumor efficacy studies were conducted using PDX mouse models bearing tumors from Black and White PCa patients.Results 4NSG was significantly stable in liver microsomal solution. The effective mean particle size (hydrodynamic diameter) of 4NSG-SLN was 82 ± 6.7 nm, and the half maximal inhibitory concentration (IC50) values of 4NSG-SLN treated PPCL-192 cells (9 ± 1.1 µM); PPCL-135 (11 ± 1.3 µM); PPCL-46 (12 ± 2.1) and PPCL-68 equaled to 22 ± 2.6 were found to be significantly lower compared to Gem treated PPCL-192 (57 ± 1.5 µM); PPCL-135 (56 ± 1.5 µM); PPCL-46 (56 ± 1.8 µM) and PPCL-68 (57 ± 2.4 µM) cells. The area under the curve (AUC), half-life, and pharmacokinetic clearance parameters for 4NSG-SLN were 3-fourfold higher than that of GemHCl. For in-vivo studies, 4NSG-SLN exhibited a two-fold decrease in tumor growth compared with GemHCl in PDX mice bearing Black and White PCa tumors.Conclusion 4NSG-SLN significantly improved the Gem's pharmacokinetic profile, enhanced Gem's systemic stability increased its antitumor efficacy in PCa PDX mice bearing Black and White patient tumors.

Evaluation of Anticancer Activity of Zhubech, a New 5-FU Analog Liposomal Formulation, against Pancreatic Cancer.

Pancreatic cancer is projected to be the second leading cause of cancer-related death by 2030 in the US. The benefits of the most common systemic therapy for various pancreatic cancers have been masked by high drug toxicities, adverse reactions, and resistance. The use of nanocarriers such as liposomes to overcome these unwanted effects has become very popular. This study aims to formulate 1,3-bistertrahydrofuran-2yl-5FU (MFU)-loaded liposomal nanoparticles (Zhubech) and to evaluate itsstability, release kinetics, in vitro and in vivo anticancer activities, and biodistribution in different tissues. Particle size and zeta potential were determined using a particle size analyzer, while cellular uptake of rhodamine-entrapped liposomal nanoparticles (Rho-LnPs) was determined by confocal microscopy. Gadolinium hexanoate (Gd-Hex) was synthesized and entrapped into the liposomal nanoparticle (LnP) (Gd-Hex-LnP), as a model contrast agent, to evaluate gadolinium biodistribution and accumulation by LnPs in vivo using inductively coupled plasma mass spectrometry (ICP-MS). The mean hydrodynamic diameters of blank LnPs and Zhubech were 90.0 ± 0.65 nm and 124.9 ± 3.2 nm, respectively. The hydrodynamic diameter of Zhubech was found to be highly stable at 4 °C and 25 °C for 30 days in solution. In vitro drug release of MFU from Zhubech formulation exhibited the Higuchi model (R2 value = 0.95). Both Miapaca-2 and Panc-1 treated with Zhubech showed reduced viability, two- or four-fold lower than that of MFU-treated cells in 3D spheroid (IC50Zhubech = 3.4 ± 1.0 µM vs. IC50MFU = 6.8 ± 1.1 µM) and organoid (IC50Zhubech = 9.8 ± 1.4 µM vs. IC50MFU = 42.3 ± 1.0 µM) culture models. Confocal imaging confirmed a high uptake of rhodamine-entrapped LnP by Panc-1 cells in a time-dependent manner. Tumor-efficacy studies in a PDX bearing mouse model revealed a more than 9-fold decrease in mean tumor volumes in Zhubech-treated (108 ± 13.5 mm3) compared to 5-FU-treated (1107 ± 116.2 mm3) animals, respectively. This study demonstrates that Zhubech may be a potential candidate for delivering drugs for pancreatic cancer treatment.

Synthesis, characterization, and anticancer evaluation of 1,3-bistetrahydrofuran-2yl-5-FU as a potential agent for pancreatic cancer.

The failure of current chemotherapeutic agents for pancreatic cancer (PCa) makes it the most aggressive soft tissue tumor with a 5-year survival of slightly above 10% and is estimated to be the second leading cause of cancer death by 2030. OBJECTIVE: The main aim was to synthesize, characterize and evaluate the anticancer activity of 1,3-bistetrahydrofuran-2yl-5FU (MFU). METHODS: MFU was synthesized by using 5-fluorouracil (5-FU) and tetrahydrofuran acetate, and characterized by nuclear magnetic resonance (NMR), micro-elemental analysis, high-performance liquid chromatography (HPLC), and liquid chromatography with mass spectrophotometry (LC-MS). MFU and Gemcitabine hydrochloride (GemHCl) were tested for antiproliferative activity against MiaPaca-2 and Panc-1 cell lines. RESULTS: The half-minimum inhibitory concentration (IC50) of MFU was twice lower than that of GemHCl when used in both cell lines. MiaPaca-2 cells (MFU-IC50 = 4.5 ± 1.2 µM vs. GemHCl-IC50 = 10.3 ± 1.1 µM); meanwhile similar trend was observed in Panc-1 cells (MFU-IC50 = 3.0 ± 1 µM vs. GemHCl-IC50 = 6.1 ± 1.03 µM). The MFU and GemHCl effects on 3D spheroids showed a similar trend (IC50-GemHCl = 14.3 ± 1.1 µM vs. IC50-MFU = 7.2 ± 1.1 µM) for MiaPaca-2 cells, and (IC50-GemHCl = 16.3 ± 1.1 µM vs. IC50-MFU = 9.2 ± 1.1 µM) for Panc-1 cells. MFU significantly inhibited clonogenic cell growth, and induced cell death via apoptosis. Cell cycle data showed mean PI for GemHCl (48.5-55.7) twice higher than MFU (24.7 to 27.9) for MiaPaca-2 cells, and similarly to Panc-1 cells. The in-vivo model showed intensely stained EGFR (stained brown) in all control, GemHCl and MFU-treated mice bearing subcutaneous PDX tumors, however, HER2 expression was less stained in MFU-treated tumors compared to GemHCl-treated tumors and controls. Mean tumor volume of MFU-treated mice (361 ± 33.5 mm3) was three-fold lower than GemHCl-treated mice (1074 ± 181.2 mm3) bearing pancreatic PDX tumors. CONCLUSION: MFU was synthesized with high purity and may have potential anticancer activity against PCa.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review.

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.

Stability characterization for pharmaceutical liposome product development with focus on regulatory considerations: An update.

Liposomes have several advantages, such as the ability to be employed as a carrier/vehicle for a variety of drug molecules and at the same time they are safe and biodegradable. In the recent times, compared to other delivery systems, liposomes have been one of the most well-established and commercializing drug products of new drug delivery methods for majority of therapeutic applications. On the other hand, it has several limitations, particularly in terms of stability, which impedes product development and performance. In this review, we reviewed all the potential instabilities (physical, chemical, and biological) that a formulation development scientist confronts throughout the development of liposomal formulations as along with the ways to overcome these challenges. We have also discussed the effect of microbiological contamination on liposomal formulations with a focus on the use of sterilization methods used to improve the stability. Finally, we have reviewed quality control techniques and regulatory considerations recommended by the agencies (USFDA and MHLW) for liposome drug product development.

Microneedle-Based Natural Polysaccharide for Drug Delivery Systems (DDS): Progress and Challenges.

In this focused progress review, the most widely accepted methods of transdermal drug delivery are hypodermic needles, transdermal patches and topical creams. However, microneedles (MNs) (or microneedle arrays) are low-invasive 3D biomedical constructs that bypass the skin barrier and produce systemic and localized pharmacological effects. In the past, biomaterials such as carbohydrates, due to their physicochemical properties, have been extensively used to manufacture microneedles (MNs). Due to their wide range of functional groups, carbohydrates enable the design and development of tunable properties and functionalities. In recent years, numerous microneedle products have emerged on the market, although much research needs to be undertaken to overcome the various challenges before the successful introduction of microneedles into the market. As a result, carbohydrate-based microarrays have a high potential to achieve a future step in sensing, drug delivery, and biologics restitution. In this review, a comprehensive overview of carbohydrates such as hyaluronic acid, chitin, chitosan, chondroitin sulfate, cellulose and starch is discussed systematically. It also discusses the various drug delivery strategies and mechanical properties of biomaterial-based MNs, the progress made so far in the clinical translation of carbohydrate-based MNs, and the promotional opportunities for their commercialization. In conclusion, the article summarizes the future perspectives of carbohydrate-based MNs, which are considered as the new class of topical drug delivery systems.

Amorphous solid dispersions: An update for preparation, characterization, mechanism on bioavailability, stability, regulatory considerations and marketed products.

Amorphous solid dispersions (ASDs) are being employed frequently to improve bioavailability of poorly soluble molecules by enhancing the rate and extant of dissolution in drug product development process. These systems comprise of an amorphous active pharmaceutical ingredient stabilized by a polymer matrix to provide enhanced stability. This review discussed the methodologies of preparation and characterization of ASDs with an emphasis on understanding and predicting stability. Rational selection of polymers, preparation techniques with its advantages and disadvantages and characterization of polymeric amorphous solid dispersions have discussed. Stability aspects have been described as per ICH guidelines which intend to depend on selection of polymers and preparation methods of ASD. The mechanism involved on improvement of bioavailability also considered. Regulatory importance of ASD and current evolving details of QBD approach were reviewed. Amorphous products and particularly ASDs are currently most emerging area in the pharmaceutical field. This strategic approach presents huge impact and advantageous features concerning the overall improvement of drug product performance in clinical settings which ultimately lead to drug product approval by leading regulatory agencies into the market.