New Titanium(IV)-Alkoxide Complexes Bearing Bidentate OO Ligand with the Camphyl Linker as Catalysts for High-Temperature Ethylene Polymerization and Ethylene/1-Octene Copolymerization.

In order to increase the thermal stability of olefin polymerization precatalysts, new titanium(IV) complexes with diolate ligands differing in the degree of steric hindrances were synthesized from readily available precursor (±)camphor. The structures of the complexes 1-2 were established by X-ray diffraction. Complexes 1-4 in the presence of an activator {EtnAlCl3-n + Bu2Mg} catalyzed the synthesis of UHMWPE with an Mv up to 10 million and a productivity of up to 3300 kg/molTi·atm·h. The obtained polymers are obviously characterized by a low density of macromolecular entanglement, which makes it possible to use the solid-phase method for their processing. The mechanical characteristics of the oriented UHMWPE films had a breaking strength up to 2.7 GPa and an elastic modulus of up to 151 GPa. The precatalysts 1-4 were also active in ethylene/1-octene copolymerization. The comonomer content was in the range of 1.4-4.6 mol%. The use of a rigid linker and an increase in the steric load of the diolate complexes ensured the thermal stability of the catalytic system in the range of 50-70 °C.

Effect of Activator and Outgoing Ligand Nature on the Catalytic Behavior of Bis(phenoxy-imine) Ti(IV) Complexes in the Polymerization of Ethylene and Its Copolymerization with Higher Olefins.

A series of bis(phenoxy-imine) (FI) titanium(IV) and zirconium(IV) complexes have been synthesized. The effect of the nature of the activator (MAO, combinations EtnAlCl3-n + Bu2Mg and iBu3Al + [Ph3C]+[B(C6F5)4]-) on the catalytic activity and properties of the resulting polymers was studied. It was found that Ti-Fi complexes, despite the nature of the outgoing ligands (Cl or iPrO) in the presence of Al/Mg activators, effectively catalyze the polymerization of ethylene (with the formation of UHMWPE); copolymerization of ethylene with 1-octene (with the formation of ultra-high molecular weight copolymers); and the ternary copolymerization of ethylene, propylene and 5-vinyl-2-norbornene (with the formation of polyolefin elastomers). It has been shown that Zr-FI complexes are not activated by these Al/Mg compositions. The resulting UHMWPE can be processed by a solventless method into high-strength and high-modulus oriented films; however, their mechanical characteristics do not exceed those obtained using MAO.

A Novel Ziegler⁻Natta-Type Catalytic System-TiCl4/2,2'-Dimethoxy-1,1'-Binaphthalene/Et3Al2Cl3/Bu2Mg for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solvent-Free Processing.

A series of ultrahigh molecular weight polyethylenes with viscosity-average molecular weights in the range of 1.6⁻5.6 × 106 have been prepared by using a novel Ziegler⁻Natta-type catalytic system-TiCl4/2,2'-dimethoxy-1,1'-binaphthalene/Et3Al2Cl3/Bu2Mg at different temperatures (Tpoly) in the range between 10 and 70 °C in toluene. The morphology of the nascent reactor powders has been studied by scanning electron microscopy, wide-angle X-ray diffraction, and the DSC melting behavior. Polymers are suitable for the modern processing methods-the solvent-free solid-state formation of super high-strength (tensile strength over 1.8⁻2.5 GPa) and high-modulus (elastic modulus up to 136 GPa) oriented film tapes. With decrease of Tpoly, the drawability of the reactor powders increased significantly.

Titanium(III, IV)-Containing Catalytic Systems for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solventless Processing-Impact of Oxidation States of Transition Metal.

Catalytic systems containing TiCl4 or TiCl3, THF, organomagnesium (n-Bu2Mg) and organoaluminum compounds capable of producing ultrahigh molecular weight polyethylene (UHMWPE) were developed. The resulting polymers were characterized by a molecular weight in the range of (1.8⁻7.8) × 106 Da and desirable morphology, suitable for modern methods of polymer processing-the solvent-free solid-state processing of superhigh-strength (tensile strength up to 2.1 GPa) and high-modulus (elastic modulus up to 125 GPa) oriented films and film tapes. The impacts of a THF additive, the oxidation state of the titanium atom, and the composition and nature of the nontransition organometallic compounds on the formation of catalytic systems for UHMWPE production were evaluated. The results indicate the suitability of individual titanium chloride tetrahydrofuran complex application for the formation of THF-containing catalytic systems. This approach also results in a significant increase in the system catalytic activity and mechanical properties of UHMWPE. The catalysts based on Ti(III) were inferior to systems containing Ti(IV) in productivity but were markedly superior in the mechanical properties of UHMWPE.

Hydrogen solubility in cristobalite at high pressure.

Powder samples of cristobalite-I are loaded with hydrogen at pressures up to 90 kbar and T = 250 °C and quenched under pressure to the liquid N2 temperature. The quenched samples are examined at ambient pressure by X-ray diffraction, Raman spectroscopy, and thermal desorption analysis. The hydrogen content of the samples is found to increase with pressure and reach a molecular ratio of H2/SiO2 ∼ 0.10 at P = 90 kbar. At ambient pressure, the samples consist of a mixture of approximately 80% cristobalite-I phase and 20% cristobalite-II-like phase, the crystal lattices of both phases being slightly expanded due to the hydrogen uptake. According to Raman spectroscopy, the hydrogen is dissolved in these phases in the form of H2 molecules.

Hydrogen solubility in amorphous silica at pressures up to 75 kbar.

The solubility of hydrogen in amorphous silica at a temperature of 250 °C and pressures up to 75 kbar is studied using a quenching technique. The molar ratio H(2)/SiO(2) is found to linearly increase with pressure from X = 0.16 at P = 6 kbar to X = 0.53 at P = 75 kbar. An investigation of a sample with X = 0.47 by Raman spectroscopy demonstrated that hydrogen dissolves in silica in the form of H(2) molecules, and these molecules occupy voids of, at least, two different types in the silica network. An X-ray diffraction study showed that the hydrogen molecules penetrating in the silica glass network prevented its irreversible densification occurring if the silica glass is compressed to the same pressure without hydrogen.

Double-bridge bonding of aluminium and hydrogen in the crystal structure of gamma-AlH3.

Aluminum trihydride (alane) is one of the most promising among the prospective solid hydrogen-storage materials, with a high gravimetric and volumetric density of hydrogen. In the present work, the alane, crystallizing in the gamma-AlH3 polymorphic modification, was synthesized and then structurally characterized by means of synchrotron X-ray powder diffraction. This study revealed that gamma-AlH3 crystallizes with an orthorhombic unit cell (space group Pnnm, a = 5.3806(1) A, b = 7.3555(2) A, c = 5.77509(5) A). The crystal structure of gamma-AlH3 contains two types of AlH6 octahedra as the building blocks. The Al-H bond distances in the structure vary in the range of 1.66-1.79 A. A prominent feature of the crystal structure is the formation of the bifurcated double-bridge bonds, Al-2H-Al, in addition to the normal bridge bonds, Al-H-Al. This former feature has not been previously reported for Al-containing hydrides so far. The geometry of the double-bridge bond shows formation of short Al-Al (2.606 A) and Al-H (1.68-1.70 A) bonds compared to the Al-Al distances in Al metal (2.86 A) and Al-H distances for Al atoms involved in the formation of normal bridge bonds (1.769-1.784 A). The crystal structure of gamma-AlH3 contains large cavities between the AlH6 octahedra. As a consequence, the density is 11% less than for alpha-AlH3.

Synthesis and crystal structure of lithium beryllium deuteride Li2BeD4.

Single-phase ternary deuteride Li(2)BeD(4) was synthesized by a high-pressure high-temperature technique from LiD and BeD(2). The crystal structure of Li(2)BeD(4) was solved from X-ray and neutron powder diffraction data. The compound crystallizes in the monoclinic space group P2(1)/c with lattice parameters a = 7.06228(9) A, b = 8.3378(1) A, c = 8.3465(1) A, beta =93.577(1) degrees, and Z = 8. Its structure contains isolated BeD(4) tetrahedra and Li atoms that are located in the structure interstices. Li(2)BeD(4) does not undergo any structural phase transitions at temperatures down to 8 K.