Comparative Study of Exsolved and Impregnated Ni Nanoparticles Supported on Nanoporous Perovskites for Low-Temperature CO Oxidation.

This study investigated the redox exsolution of Ni nanoparticles from a nanoporous La0.52Sr0.28Ti0.94Ni0.06O3 perovskite. The characteristics of exsolved Ni nanoparticles including their size, population, and surface concentration were deeply analyzed by environmental scanning electron microscopy (ESEM), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDX) mapping, and hydrogen temperature-programmed reduction (H2-TPR). Ni exsolution was triggered in hydrogen as early as 400 °C, with the highest catalytic activity for low-temperature CO oxidation achieved after a reduction step at 500 °C, despite only a 10% fraction of Ni exsolved. The activity and stability of exsolved nanoparticles were compared with their impregnated counterparts on a perovskite material with a similar chemical composition (La0.65Sr0.35TiO3) and a comparable specific surface area and Ni loading. After an aging step at 800 °C, the catalytic activity of exsolved Ni nanoparticles at 300 °C was found to be 10 times higher than that of impregnated ones, emphasizing the thermal stability of Ni nanoparticles prepared by redox exsolution.

Single source precursor route to nanometric tin chalcogenides.

Low-temperature solution phase synthesis of nanomaterials using designed molecular precursors enjoys tremendous advantages over traditional high-temperature solid-state synthesis. These include atomic-level control over stoichiometry, homogeneous elemental dispersion and uniformly distributed nanoparticles. For exploiting these advantages, however, rationally designed molecular complexes having certain properties are usually required. We report here the synthesis and complete characterization of new molecular precursors containing direct Sn-E bonds (E = S or Se), which undergo facile decomposition under different conditions (solid/solution phase, thermal/microwave heating, single/mixed solvents, varying temperatures, etc.) to afford phase-pure or mixed-phase tin chalcogenide nanoflakes with defined ratios.

Room-temperature conversion of Cu2-xSe to CuAgSe nanoparticles to enhance the photocatalytic performance of their composites with TiO2.

Rational design and precise engineering are needed to optimize the structural and chemical parameters of functional materials. In this work, we demonstrate how pre-formed binary metal selenides can be an excellent synthetic choice for the synthesis of ternary coinage metal selenide nanoparticles (NPs) with controlled composition. The mild conditions required to obtain these ternary coinage metal selenide NPs offered an easy synthesis of n% CuAgSe-TiO2 (n = 0.01, 0.1, 0.3 and 1.0 mol%) nanocomposites for photocatalytic applications without compromising the structural and morphological characteristics of TiO2 and without having any organic ligands around the NPs. The use of ternary metal selenide nanocomposites CuAgSe-TiO2 results in a clear improvement in their photocatalytic activity for the photodegradation of formic acid as compared to the well-known benchmark for photocatalysis, TiO2 (P25), and its binary metal selenide nanocomposites Cu2-xSe-TiO2. DFT calculations establish semi-metallic behavior of CuAgSe NPs and show that CuAgSe-TiO2 forms a semimetallic-semiconductor heterojunction allowing a better charge separation to enhance its photocatalytic activity.

CO Hydrogenation on Cobalt-Based Catalysts: Tin Poisoning Unravels CO in Hollow Sites as a Main Surface Intermediate.

Site poisoning is a powerful method to unravel the nature of active sites or reaction intermediates. The nature of the intermediates involved in the hydrogenation of CO was unraveled by poisoning alumina-supported cobalt catalysts with various concentrations of tin. The rate of formation of the main reaction products (methane and propylene) was found to be proportional to the concentration of multi-bonded CO, likely located in hollow sites. The specific rate of decomposition of these species was sufficient to account for the formation of the main products. These hollow-CO are proposed to be main reaction intermediates in the hydrogenation of CO under the reaction conditions used here, while linear CO are mostly spectators.

Quasi all-silica zeolite obtained by isomorphous degermanation of an as-made germanium-containing precursor.

Ge-containing ITQ-22 zeolites have been almost completely degermanated under strong acidic conditions without modifications of the framework topology. Simultaneous to Ge extraction, the framework was partially dissolved; mesopores were formed but the structure was maintained through the re-incorporation of some of silicon species at vacant sites. The presence of many defects in the degermanated framework enabled the incorporation of tetrahedral aluminum, opening the way to the preparation of new and stable acid catalysts with original topologies.

Ultimate size control of encapsulated gold nanoparticles.

We report an original and scalable synthesis pathway to produce encapsulated gold nanoparticles. Precise control of the gold particles is achieved in the range of 1-10 nm through the impregnation of silicalite-1 with a controlled concentration of gold solution, followed by dissolution-recrystallization of the zeolite.

Highly efficient aerobic oxidation of alkenes over unsupported nanogold.

An octylsilane-stabilized colloidal dispersion of 2 nm crystalline gold nanoparticles is highly active and selective for the aerobic oxidations of stilbene and cyclohexene in methylcyclohexane.