Osteoblast-specific deletion of Hrpt2/Cdc73 results in high bone mass and increased bone turnover.

Inactivating mutations that lead to loss of heterozygosity within the HRPT2/Cdc73 gene are directly linked to the development of primary hyperparathyroidism, parathyroid adenomas, and ossifying fibromas of the jaw (HPT-JT). The protein product of the Cdc73 gene, parafibromin, is a core member of the polymerase-associated factors (PAF) complex, which coordinates epigenetic modifiers and transcriptional machinery to control gene expression. We conditionally deleted Cdc73 within mesenchymal progenitors or within mature osteoblasts and osteocytes to determine the consequences of parafibromin loss within the mesenchymal lineage. Homozygous deletion of Cdc73 via the Dermo1-Cre driver resulted in embryos which lacked mesenchymal organ development of internal organs, including the heart and fetal liver. Immunohistochemical detection of cleaved caspase-3 revealed extensive apoptosis within the progenitor pools of developing organs. Unexpectedly, when Cdc73 was homozygously deleted within mature osteoblasts and osteocytes (via the Ocn-Cre driver), the mice had a normal life span but increased cortical and trabecular bone. OCN-Cre;Cdc73flox/flox bones displayed large cortical pores actively undergoing bone remodeling. Additionally the cortical bone of OCN-Cre;Cdc73flox/flox femurs contained osteocytes with marked amounts of cytoplasmic RNA and a high rate of apoptosis. Transcriptional analysis via RNA-seq within OCN-Cre;Cdc73flox/flox osteoblasts showed that loss of Cdc73 led to a derepression of osteoblast-specific genes, specifically those for collagen and other bone matrix proteins. These results aid in our understanding of the role parafibromin plays within transcriptional regulation, terminal differentiation, and bone homeostasis.

Mice with a heterozygous Lrp6 deletion have impaired fracture healing.

Bone fracture non-unions, the failure of a fracture to heal, occur in 10%-20% of fractures and are a costly and debilitating clinical problem. The Wnt/ß-catenin pathway is critical in bone development and fracture healing. Polymorphisms of linking low-density lipoprotein receptor-related protein 6 (LRP6), a Wnt-binding receptor, have been associated with decreased bone mineral density and fragility fractures, although this remains controversial. Mice with a homozygous deletion of Lrp6 have severe skeletal abnormalities and are not viable, whereas mice with a heterozygous deletion have a combinatory effect with Lrp5 to decrease bone mineral density. As fracture healing closely models embryonic skeletal development, we investigated the process of fracture healing in mice heterozygous for Lrp6 (Lrp6 (+/-)) and hypothesized that the heterozygous deletion of Lrp6 would impair fracture healing. Mid-diaphyseal femur fractures were induced in Lrp6 (+/-) mice and wild-type controls (Lrp6 (+/+)). Fractures were analyzed using micro-computed tomography (µCT) scans, biomechanical testing, and histological analysis. Lrp6 (+/-) mice had significantly decreased stiffness and strength at 28 days post fracture (PF) and significantly decreased BV/TV, total density, immature bone density, and mature area within the callus on day-14 and -21 PF; they had significantly increased empty callus area at days 14 and 21 PF. Our results demonstrate that the heterozygous deletion of Lrp6 impairs fracture healing, which suggests that Lrp6 has a role in fracture healing.

Fracture healing in mice lacking Pten in osteoblasts: a micro-computed tomography image-based analysis of the mechanical properties of the femur.

In the United States, approximately eight million osseous fractures are reported annually, of which 5-10% fail to create a bony union. Osteoblast-specific deletion of the gene Pten in mice has been found to stimulate bone growth and accelerate fracture healing. Healing rates at four weeks increased in femurs from Pten osteoblast conditional knock-out mice (Pten-CKO) compared to wild-type mice (WT) of the same genetic strain as measured by an increase in mechanical stiffness and failure load in four-point bending tests. Preceding mechanical testing, each femur was imaged using a Skyscan 1172 micro-computed tomography (µCT) scanner (Skyscan, Kontich, Belgium). The present study used µCT image-based analysis to test the hypothesis that the increased femoral fracture force and stiffness in Pten-CKO were due to greater section properties with the same effective material properties as that of the WT. The second moment of area and section modulus were computed in ImageJ 1.46 (National Institutes of Health) and used to predict the effective flexural modulus and the stress at failure for fourteen pairs of intact and callus WT and twelve pairs of intact and callus Pten-CKO femurs. For callus and intact femurs, the failure stress and tissue mineral density of the Pten-CKO and WT were not different; however, the section properties of the Pten-CKO were more than twice as large 28 days post-fracture. It was therefore concluded, when the gene Pten was conditionally knocked-out in osteoblasts, the resulting increased bending stiffness and force to fracture were due to increased section properties.

Estimating the density of femoral head trabecular bone from hip fracture patients using computed tomography scan data.

The purpose of this study was to compare computed tomography density (ρCT ) obtained using typical clinical computed tomography scan parameters to ash density (ρash ), for the prediction of densities of femoral head trabecular bone from hip fracture patients. An experimental study was conducted to investigate the relationships between ρash and ρCT and between each of these densities and ρbulk and ρdry . Seven human femoral heads from hip fracture patients were computed tomography-scanned ex vivo, and 76 cylindrical trabecular bone specimens were collected. Computed tomography density was computed from computed tomography images by using a calibration Hounsfield units-based equation, whereas ρbulk, ρdry and ρash were determined experimentally. A large variation was found in the mean Hounsfield units of the bone cores (HUcore) with a constant bias from ρCT to ρash of 42.5 mg/cm3. Computed tomography and ash densities were linearly correlated (R 2 = 0.55, p < 0.001). It was demonstrated that ρash provided a good estimate of ρbulk (R 2 = 0.78, p < 0.001) and is a strong predictor of ρdry (R 2 = 0.99, p < 0.001). In addition, the ρCT was linearly related to ρbulk (R 2 = 0.43, p < 0.001) and ρdry (R 2 = 0.56, p < 0.001). In conclusion, mineral density was an appropriate predictor of ρbulk and ρdry , and ρCT was not a surrogate for ρash . There were linear relationships between ρCT and physical densities; however, following the experimental protocols of this study to determine ρCT , considerable scatter was present in the ρCT relationships.

Biomechanical evaluation of fracture fixation constructs using a variable-angle locked periprosthetic femur plate system.

BACKGROUND: In the United States there are more than 230,000 total hip replacements annually, and periprosthetic femoral fractures occur in 0.1-4.5% of those patients. The majority of these fractures occur at the tip of the stem (Vancouver type B1). The purpose of this study was to compare the biomechanically stability and strength of three fixation constructs and identify the most desirable construct. METHODS: Fifteen medium adult synthetic femurs were implanted with a hip prosthesis and were osteotomized in an oblique plane at the level of the implant tip to simulate a Vancouver type B1 periprosthetic fracture. Fractures were fixed with a non-contact bridging periprosthetic proximal femur plate (Zimmer Inc., Warsaw, IN). Three proximal fixation methods were used: Group 1, bicortical screws; Group 2, unicortical screws and one cerclage cable; and Group 3, three cerclage cables. Distally, all groups had bicortical screws. Biomechanical testing was performed using an axial-torsional testing machine in three different loading modalities (axial compression, lateral bending, and torsional/sagittal bending), next in axial cyclic loading to 10,000 cycles, again in the three loading modalities, and finally to failure in torsional/sagittal bending. RESULTS: Group 1 had significantly greater load to failure and was significantly stiffer in torsional/sagittal bending than Groups 2 and 3. After cyclic loading, Group 2 had significantly greater axial stiffness than Groups 1 and 3. There was no difference between the three groups in lateral bending stiffness. The average energy absorbed during cyclic loading was significantly lower in Group 2 than in Groups 1 and 3. CONCLUSIONS: Bicortical screw placement achieved the highest load to failure and the highest torsional/sagittal bending stiffness. Additional unicortical screws improved axial stiffness when using cable fixation. Lateral bending was not influenced by differences in proximal fixation. CLINICAL RELEVANCE: To treat periprosthetic fractures, bicortical screw placement should be attempted to maximize load to failure and torsional/sagittal bending stiffness.

Mice lacking pten in osteoblasts have improved intramembranous and late endochondral fracture healing.

The failure of an osseous fracture to heal (development of a non-union) is a common and debilitating clinical problem. Mice lacking the tumor suppressor Pten in osteoblasts have dramatic and progressive increases in bone volume and density throughout life. Since fracture healing is a recapitulation of bone development, we investigated the process of fracture healing in mice lacking Pten in osteoblasts (Ocn-cre(tg/+;)Pten(flox/flox) ). Mid-diaphyseal femoral fractures induced in wild-type and Ocn-cre(tg/+;)Pten(flox/flox) mice were studied via micro-computed tomography (µCT) scans, biomechanical testing, histological and histomorphometric analysis, and protein expression analysis. Ocn-cre(tg/+;)Pten(flox/flox) mice had significantly stiffer and stronger intact bones relative to controls in all cohorts. They also had significantly stiffer healing bones at day 28 post-fracture (PF) and significantly stronger healing bones at days 14, 21, and 28 PF. At day 7 PF, the proximal and distal ends of the Pten mutant calluses were more ossified. By day 28 PF, Pten mutants had larger and more mineralized calluses. Pten mutants had improved intramembranous bone formation during healing originating from the periosteum. They also had improved endochondral bone formation later in the healing process, after mature osteoblasts are present in the callus. Our results indicate that the inhibition of Pten can improve fracture healing and that the local or short-term use of commercially available Pten-inhibiting agents may have clinical application for enhancing fracture healing.

Regulation of Wnt/ß-catenin signaling within and from osteocytes.

Bone has long been known to be responsive to mechanical loading. For at least 25 years it has been known that osteocytes sense mechanical load, and because of their response to mechanical loading, osteocytes are believed to be the mechanosensory cell. The Wnt/ß-catenin signaling pathway has been shown to be crucial in bone development. Mutations in LRP5 and SOST, which cause high bone mass, have increased interest in the Wnt pathway as a potential target for osteoporosis therapy and have helped link Wnt/ß-catenin signaling to bone's response to mechanical loading. Because of its specificity to osteocytes, the Wnt inhibitor sclerostin is a target for anabolic bone therapies. The response of bone to mechanical loading is critically regulated by osteocytes secreting sclerostin, which binds to Lrp5.

Recent advances in the use of serological bone formation markers to monitor callus development and fracture healing.

The failure of an osseous fracture to heal, or the development of a nonunion, is common; however, current diagnostic measures lack the capability of early and reliable detection of such events. Analyses of radiographic imaging and clinical examination, in combination, remain the gold standard for diagnosis; however, these methods are not reliable for early detection. Delayed diagnosis of a nonunion is costly from both the patient and treatment standpoints. In response, repeated efforts have been made to identify bone metabolic markers as diagnostic or prognostic tools for monitoring bone healing. Thus far, the evidence regarding a correlation between the kinetics of most bone metabolic markers and nonunion is very limited. With the aim of classifying the role of biological pathways of bone metabolism and of understanding bone conditions in the development of osteoporosis, advances have been made in our knowledge of the molecular basis of bone remodeling, fracture healing, and its failure. Procollagen type I amino-terminal propeptide has been shown to be a reliable bone formation marker in osteoporosis therapy and its kinetics during fracture healing has been recently described. In this article, we suggest that procollagen type I amino-terminal propeptide presents a good opportunity for early detection of nonunion. We also review the role and potential of serum PINP, as well as other markers, as indications of fracture healing.

Post-yield relaxation behavior of bovine cancellous bone.

Relaxation studies were conducted on specimens of bovine cancellous bone at post-yield strains. Stress and strain were measured for 1000s and the relaxation modulus was determined. Fifteen cylindrical, cancellous bone specimens were removed from one bovine femur in the anterior-posterior direction. The relaxation modulus was found to be a function of strain. Therefore cancellous bone is non-linearly viscoelastic/viscoplastic in the plastic region. A power law regression was fit to the relaxation modulus data. The multiplicative constant was found to be statistically related through a power law relationship to both strain (p<0.0005) and apparent density (p<0.0005) while the power coefficient was found to be related through a power law relationship, E(t, epsilon)=A(epsilon)t(-n(epsilon)), to strain (p<0.0005), but not apparent density.

Compressive properties of trabecular bone in the distal femur.

Early loosening and implant migration are two problems that lead to failures in cementless (press-fit) femoral knee components of total knee replacements. To begin to address these early failures, this study determined the anterior-posterior mechanical properties from four locations in the human distal femur. Thirty-three cylindrical specimens were removed perpendicular to the press-fit surface after the surgical cuts on 10 human cadaveric femurs (age 71.5+/-14.2 years) had been made. Compression testing was performed that utilized methods to reduce the effects of end-artifacts. The bone mineral apparent density (BMAD), apparent modulus of elasticity, yield and ultimate stress, and yield and ultimate strain were measured for 28 cylindrical specimens. The apparent modulus, yield and ultimate stress, and yield and ultimate strain each significantly differed (p<0.05) in the superior and inferior locations. Linear and power law relationships between superior and inferior mechanical properties and BMAD were determined. The inferior apparent modulus and stresses were higher than those in the superior locations. These results show that the press-fit fixation characteristics of the femoral knee component differ on the anterior shield and posterior condyles. This information will be useful in the assignment of mechanical properties in finite element models for further investigations of femoral knee components. The property-density relations also have applications for implant design and preoperative assessment of bone strength using clinically available tools.