Efficacy of ultrasonic home-care denture cleaning versus conventional denture cleaning: A randomised crossover clinical trial.

OBJECTIVE: To compare the efficacy of test (ultrasonic cleaner combined with immersion in denture cleanser solution) and control (immersion in denture cleanser solution followed by conventional brushing) denture cleaning interventions in enhancing denture cleanliness, reducing denture stomatitis, and improving patient satisfaction. METHODS: A prospective, single-blind, block-randomised, two-period crossover, superiority-controlled clinical trial was conducted of a 3-month intervention. The study design included a pre-intervention period (2 weeks), intervention period one (3 months), washout period (2 weeks), and intervention period two (3 months). A total of 56 community-dwelling elders were block-randomized into either sequence Test/Control or sequence Control/Test. The intervention, period, and carryover effects for the changes in the cleanliness of extensive partial and complete acrylic dentures, denture stomatitis, and changes in patient satisfaction were estimated using Generalized Estimating Equations models. RESULTS: Percentage plaque area coverage, patient satisfaction, and denture stomatitis were significantly improved for both intervention and control arms after 3 months (P < 0.05). The intervention arm was found to significantly improve denture cleanliness (P < 0.001) and patient satisfaction (P = 0.002) more than the control arm. Denture-wearing habits and denture age were also significantly associated with the changes in denture plaque coverage (P < 0.05). However, the effect of the test intervention on denture stomatitis was not significantly different compared to the control arm (P = 0.284). CONCLUSION: This study revealed that the test intervention group was significantly more effective than the control group in improving denture cleanliness and patient satisfaction among community-dwelling elders. This test intervention is recommended for maintaining optimum denture hygiene among older adults. CLINICAL SIGNIFICANCE: Removable dentures can harbor opportunistic pathogens, emphasizing the need for effective denture hygiene intervention using ultrasonic cleaner combined with immersion in denture cleanser solution to eliminate denture biofilm in community-dwelling elders.

A comparative study on the mechanical and antibacterial properties of BPA-free dental resin composites.

OBJECTIVE: The commonly used base monomer utilized in resinous commercial dental restorative products is bis-GMA which is derived from bisphenol-A (BPA) - a well-known compound which may disrupt endocrine functions. To address concerns about its leaching into the oral environment and to optimize the quality of dental composites, a BPA-free alternative base monomer, fluorinated urethane dimethacrylate (FUDMA), was designed by modifying a UDMA monomer system. METHODS: Nine groups of composites were prepared by mixing the base monomers and TEGDMA in a ratio of 70/30 wt% to which were added silanized glass particles (mean diameter: 0.7 µm) in 3 different volume fractions (40, 45, and 50 vol%). Bis-GMA and UDMA base monomers were used as control groups in the same ratios. Various properties including degree of conversion (DC), flexural strength (FS) and flexural modulus (FM), water sorption (WS), solubility (SL), surface hardness and roughness, and initial adhesion property against S.mutans were investigated. One-way analysis of variance followed by Bonferroni test at α = 0.05 was used to analyze the results. RESULTS: A significant difference in FS between FUDMA-based composite with 40 vol% filler (120.3 ± 10.4 MPa) and Bis-GMA-based composite with the same filler fraction (105.8 ± 10.0 MPa) was observed but there was no significant difference among other groups. The UDMA based group exhibited the highest WS (1.3 ± 0.3 %). Bis-GMA showed greater initial bacterial adhesion but was not statistically different from the other groups (p = 0.082). SIGNIFICANCE: FUDMA-based resin composites exhibit comparable mechanical and bacterial adhesion properties compared with Bis-GMA and UDMA-based composites. The FUDMA composites show positive outcomes indicating they could be used as substitute composites to Bis-GMA-based composites.

Association between tooth loss-related speech and psychosocial impairment with cognitive function: A pilot study in Hong Kong's older population.

BACKGROUND: Tooth loss has been associated with cognitive decline, but the underlying mechanisms involving speech and psychosocial impairment remain unclear. OBJECTIVES: To investigate the impact of tooth loss-related speech and psychosocial impairment on cognitive function in Hong Kong's older population. METHODS: Seventy-six Cantonese-speaking participants between the ages of 51-92 were classified into three groups: patients with complete dentures (CD), partially edentulous patients with less than 10 occluding tooth pairs (OU <10), and at least 10 occluding tooth pairs (OU ≥10). Cognitive function was assessed using the Montreal Cognitive Assessment Hong Kong Version, One-minute Verbal Fluency Task and Hayling Sentence Completion Test. Objective and subjective speech assessments were carried out using artificial intelligence speech recognition algorithm and a self-designed speech questionnaire. The impact of tooth loss on psychosocial condition was evaluated by the Reading the Mind in the Eyes Test and a self-designed questionnaire. Statistical analyses (one-way ANOVA, ANCOVA, Kruskal-Wallis test, Spearman correlation test) were performed. RESULTS: Tooth loss was significantly associated with lower cognitive function (p = .008), speech accuracy (p = .018) and verbal fluency (p = .001). Correlations were found between cognitive function and speech accuracy (p < .0001). No significant difference in tooth loss-related psychosocial impact was found between the three groups. CONCLUSION: While warranting larger sample sizes, this pilot study highlights the need for further research on the role of speech in the association between tooth loss and cognitive function. The potential cognitive impact of tooth retention, together with its known biological and proprioceptive benefits, supports the preservation of the natural dentition.

Design of Multi-Functional Bio-Safe Dental Resin Composites with Mineralization and Anti-Biofilm Properties.

This study aims to develop multi-functional bio-safe dental resin composites with capabilities for mineralization, high in vitro biocompatibility, and anti-biofilm properties. To address this issue, experimental resin composites consisting of UDMA/TEGDMA-based dental resins and low quantities (1.9, 3.8, and 7.7 vol%) of 45S5 bioactive glass (BAG) particles were developed. To evaluate cellular responses of resin composites, MC3T3-E1 cells were (1) exposed to the original composites extracts, (2) cultured directly on the freshly cured resin composites, or (3) cultured on preconditioned composites that have been soaked in deionized water (DI water), a cell culture medium (MEM), or a simple HEPES-containing artificial remineralization promotion (SHARP) solution for 14 days. Cell adhesion, cell viability, and cell differentiation were, respectively, assessed. In addition, the anti-biofilm properties of BAG-loaded resin composites regarding bacterial viability, biofilm thickness, and biofilm morphology, were assessed for the first time. In vitro biological results demonstrated that cell metabolic activity and ALP expression were significantly diminished when subjected to composite extracts or direct contact with the resin composites containing BAG fillers. However, after the preconditioning treatments in MEM and SHARP solutions, the biomimetic calcium phosphate minerals on 7.7 vol% BAG-loaded composites revealed unimpaired or even better cellular processes, including cell adhesion, cell proliferation, and early cell differentiation. Furthermore, resin composites with 1.9, 3.8, and 7.7 vol% BAG could not only reduce cell viability in S. mutans biofilm on the composite surface but also reduce the biofilm thickness and bacterial aggregations. This phenomenon was more evident in BAG7.7 due to the high ionic osmotic pressure and alkaline microenvironment caused by BAG dissolution. This study concludes that multi-functional bio-safe resin composites with mineralization and anti-biofilm properties can be achieved by adding low quantities of BAG into the resin system, which offers promising abilities to mineralize as well as prevent caries without sacrificing biological activity.

A comparison of the prevalence of respiratory pathogens and opportunistic respiratory pathogenic profile of 'clean' and 'unclean' removable dental prostheses.

OBJECTIVES: To determine and compare the opportunistic respiratory pathogenic index (ORPI) and prevalence of respiratory pathogens between clean and unclean removable prostheses. METHODS: A cross-sectional study was conducted among 97 removable prosthesis wearers at a teaching dental hospital. Participants' prosthesis hygiene was grouped into clean and unclean. After prosthesis plaque samples were sequenced using the Type IIB Restriction-site Associated DNA Sequencing for Microbiome method, the prevalence was assessed for the presence of respiratory pathogens on each sample. The ORPIs for clean and unclean prostheses were quantified based on the sum of the relative abundance of respiratory pathogenic bacteria in a microbiome using a reference database that contains opportunistic respiratory pathogens and disease-associated information. RESULTS: A total of 30 opportunistic respiratory pathogens were identified on the removable prostheses. Eighty-one (83.5 %) removable prostheses harboured respiratory pathogenic bacteria. Stenotrophomonas maltophilia (34.0 %), Pseudomonas aeruginosa (27.8 %), and Streptococcus agalactiae (27.8 %) were the top three prevalent respiratory pathogens detected in plaque samples. There was a significantly higher prevalence of respiratory pathogens residing on unclean than clean prostheses (P = 0.046). However, the ORPIs in both groups showed no statistically significant difference (P = 0.516). CONCLUSIONS: The ORPIs for both clean and unclean prostheses demonstrated a similar abundance of respiratory pathogens. However, the high prevalence of respiratory pathogens residing on unclean prostheses should not be underestimated. Therefore, maintaining good prosthesis hygiene is still important for overall oral and systemic health, even though the direct link between prosthesis cleanliness and reduced abundance of respiratory pathogens has not been established. CLINICAL SIGNIFICANCE: The association between the prevalence of respiratory pathogens and unclean removable prostheses has been demonstrated and might increase the theoretical risk of respiratory disease development.

Questionnaire survey on hands-on simulation training using a dental humanoid robot (SIMROID®).

INTRODUCTION: A dental humanoid robot, SIMROID®, is able to replicate the actions characteristic of human beings and enable training for communicating with patients and coping with unexpected situations. This study assessed user experiences via a survey questionnaire following hands-on training on the SIMROID®. MATERIALS AND METHODS: A total of 112 participants, consisting of 50 high school students who visited AUSD (Asahi University School of Dentistry) to participate in open campus events, 42 fourth-year students at AUSD and 20 dental students from Mexico State Autonomy University, University of Siena and Peking University took the survey. The participants observed the movements and reactions of a SIMROID® robot placed on a dental unit for approximately 20 min after which they completed a questionnaire survey. Both Japanese and English versions of the questionnaire were prepared for local and visiting foreign dental students. The questionnaire comprised 8 items, with a further two items for those undertaking dental training and an open comment field. RESULTS: All participants who observed the SIMROID® completed the questionnaire giving a 100% response rate. Generally, simulation training with SIMROID® was highly appreciated by all participants. The comprehensive evaluation score for SIMROID® was 4.56 ± 0.50 points for high school students, 4.05 ± 0.82 points for students at AUSD and 4.70 ± 0.47 points for foreign dental students, showing all participants had a very positive experience and impression of the SIMROID®. CONCLUSIONS: Therefore, simulation training using SIMROID® seems beneficial learning tool.

Association of dietary inflammation with tooth loss and cognitive decline in older adults from cross-sectional data: The moderated role of albumin.

OBJECTIVE: Growing evidence suggests a potential connection between tooth loss and cognitive function in recent years. Increasing studies have focused on their inter-relationship, however, the underlying mechanism has yet to be fully elucidated. Few studies have considered the role of dietary inflammation and serum albumin in the association between tooth loss and cognitive function. Therefore, the aim of this study was to explore the role of dietary inflammation and serum albumin in the association between tooth loss and cognitive impairment. METHODS: A sample of 1,009 US adults from the National Health and Nutrition Examination Survey (NHANES) provided data on oral condition, cognitive function, dietary intake, and serum tests. The association between tooth loss (exposure variable) and cognitive function (outcome variable) was assessed by linear regression. Furthermore, a moderated mediation model was established to examine the influence of dietary inflammation on the association between tooth loss and cognitive tests, and the visualization of the moderating effect of serum albumin concentration was displayed through the Johnson-Neyman curve. RESULTS: Participants with impaired dentition had worse cognitive function and a higher Dietary Inflammation Index (DII). DII was highly correlated with Immediate Recall Test (IR), Animal Fluency Test (AFT), and Digit Symbol Substitution Test (DSST), which mediated 16.46 %, 14.41 % and 11.28 % of the effect between tooth loss and cognitive functions. Additionally, the relationship between DII and DSST was moderated by serum albumin concentration. CONCLUSION: Tooth loss was associated with cognitive function which was affected by pro-inflammatory dietary patterns and serum albumin level. CLINICAL SIGNIFICANCE: This study presents evidence for dentists that dietary pattern change due to tooth loss plays a role in cognitive deterioration, which can also be moderated by serum albumin level. Therefore, the preservation of natural teeth is important for cognitive function, especially in an immunocompromised population with decreased serum albumin concentrations.

Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange.

Surface pre-reacted glass-ionomer (S-PRG) filler is a bioactive glass filler capable of releasing various ions. A culture medium to which was added an S-PRG filler eluate rich in boron was reported to enhance alkaline phosphatase (ALP) activity in human dental pulp-derived stem cells (hDPSC). To clarify the role of boron eluted from S-PRG fillers, the modified S-PRG filler eluate with different boron concentrations was prepared by using an anion exchange material. Therefore, elemental mapping analysis of anion exchange material, adsorption ratio, hDPSCs proliferation and ALP activity were evaluated. For statistical analysis, Kruskal-Wallis test was used, with statistical significance determined at p<0.05. ALP activity enhancement was not observed in hDPSC cultured in the medium that contained the S-PRG filler eluate from which boron had been removed. The result suggested the possibility that an S-PRG filler eluate with controlled boron release could be useful for the development of novel dental materials.

Characterization of pathogenic microbiome on removable prostheses with different levels of cleanliness using 2bRAD-M metagenomic sequencing.

Background: The microbiomes on the surface of unclean removable prostheses are complex and yet largely underexplored using metagenomic sequencing technology. Objectives: To characterize the microbiome of removable prostheses with different levels of cleanliness using Type IIB Restriction-site Associated DNA for Microbiome (2bRAD-M) sequencing and compare the Microbial Index of Pathogenic Bacteria (MIP) between clean and unclean prostheses. Materials and Methods: Ninety-seven removable prostheses were classified into 'clean' and 'unclean' groups. All prosthesis plaque samples underwent 2bRAD metagenomic sequencing to characterize the species-resolved microbial composition. MIPs for clean and unclean prostheses were calculated based on the sum of the relative abundance of pathogenic bacteria in a microbiome using a reference database that contains opportunistic pathogenic bacteria and disease-associated information. Results: Beta diversity analyses based on Jaccard qualitative and Bray-Curtis quantitative distance matrices identified significant differences between the two groups (p < 0.05). There was a significant enrichment of many pathogenic bacteria in the unclean prosthesis group. The MIP for unclean prostheses (0.47 ± 0.25) was significantly higher than for clean prostheses (0.37 ± 0.29), p = 0.029. Conclusions: The microbial community of plaque samples from 'unclean' prostheses demonstrated compositional differences compared with 'clean' prostheses. In addition, the pathogenic microbiome in the 'unclean' versus 'clean' group differed.

The pathogenic microbiome in the unclean removable prosthesis group tends to be more abundant than that of the clean counterpart among participants with the majority being elders attending a teaching hospital. This finding is worrying because a general decline in systemic health among community-dwelling elders may predispose them to life-threatening diseases.By understanding the characteristics of the microbiome of removable prostheses with different levels of cleanliness and the related microbial-infection risks after a comprehensive whole metagenomic sequencing, appropriate prosthesis hygiene care should be emphasized.This study introduced a comprehensive and novel method of microbiological investigation of plaque using 2bRAD-M. The taxonomic profile of the microbiome of whole genomes was demonstrated and resolved at the species-level taxonomy for prosthesis biofilms. The biggest advantage of this method included overcoming the DNA sample problems particularly the low-biomass nature of 'clean' prosthesis plaque samples. The findings will add to our understanding of the microbiological aspect of removable prosthesis plaque.

Prevalence of respiratory pathogens colonizing on removable dental prostheses in healthy older adults: A systematic review and meta-analysis.

PURPOSE: This systematic review and meta-analysis aimed to investigate the prevalence of opportunistic respiratory pathogens colonizing removable dental prostheses in older adults without respiratory diseases. METHODS: This review was registered with PROSPERO and conducted in accordance with the principles formed by the working group of the Joanna Briggs Institute (JBI) to evaluate systematic reviews of prevalence data. Literature searches were conducted across five electronic databases. Quality assessments were determined according to a revised JBI critical appraisal checklist across nine criteria. Comparison between fixed- and random-effects meta-analyses were performed for sensitivity analysis. Prediction intervals were also presented when three or more studies were included in the meta-analysis. RESULTS: Across the databases, 1091 articles were identified, and 591 articles remained after the removal of duplicates. Twenty "potentially effective" studies were identified. Ultimately eight studies informed this review and meta-analyses were performed for 13 known respiratory pathogens. The meta-analyses identified the top three common respiratory pathogens residing on the removable prostheses were, in descending order: Staphylococcus aureus: 31.81% (95% CI: 13.34%-48.24%); Staphylococcus epidermidis: 14.07% (95% CI: 7.88%-21.48%); Klebsiella pneumoniae: 10.50% (95% CI: 2.55%-22.30%). The heterogeneity scores for nine respiratory pathogen analyses were classified as "unimportant inconsistency", I2  = 0% (p > 0.1). For sensitivity analysis, there was no difference between the random- and fixed-effects models. CONCLUSION: The existing evidence demonstrated a high burden of certain opportunistic respiratory pathogens, which may be considered a major potential cause of respiratory infections in older adults wearing removable prostheses.

SURVIVAL AND COMPLICATION RATES OF RESIN COMPOSITE LAMINATE VENEERS: A SYSTEMATIC REVIEW AND META-ANALYSIS.

OBJECTIVES: The aim of this systematic review was to evaluate the survival and complication rates of resin composite laminate veneers. METHODS: Randomized controlled trials and cohort studies with a minimum 2-year follow-up assessing survival and complication rates of resin composite laminate veneers on permanent dentition from 1998 to May 2022. Literature searches were conducted in MEDLINE (PubMed), Scopus, and the Cochrane Central Register of Controlled Trials electronic databases. References cited in the related reviews and included full-text articles were also hand-searched to further identify potentially relevant studies. RESULTS: A total of 827 articles were identified. Twenty-two studies were considered for full-text review after the title and abstract screening stage. After exclusion, 7 studies (3 randomized controlled trials and 4 cohort studies) were included in the systematic review. Three published scales were adopted for the quality and risk of bias assessment. At the survival rate threshold, the overall heterogeneity (I2) for randomized controlled trials was 50.5% (P = .108). The overall pooled survival rate of the randomized controlled trials was 88% (95% CI: 81%-94%), with the mean follow-up time ranging from 24 to 97 months. Surface roughness, color mismatch, and marginal discoloration were the most reported complications. CONCLUSION: Resin composite laminate veneers demonstrated moderately high survival rates for the entire sample and the direct laminate veneer group demonstrated higher survival rates than the indirect approach. Most of the complications were regarded as clinically acceptable with or without reintervention.

Application of 20% silver nanoclusters in polymethacrylic acid on simulated dentin caries; its penetration depth and effect on surface hardness.

The aims of this study were: To evaluate the surface hardness of simulated dentin caries lesions treated with either silver nanoclusters (AgNCls) synthesized in polymethacrylic acid (PMAA) or 38% silver diammine fluoride (SDF), as well as observe the penetration of the treatment solutions into the simulated caries lesions. Dentin blocks 4 mm thick obtained from caries-free third molars were sectioned and then simulated caries lesions on the occlusal dentin surfaces were created. Each specimen (n = 8) was divided into four sections: (A) treated with 20% AgNCls/PMAA; (B) treated with SDF 38% (FAgamin, Tedequim, Cordoba, Argentina); (C) sound tooth protected by nail-varnish during artificial caries generation (positive control); and (D) artificial caries lesion without surface treatment (negative control). AgNCls/PMAA or SDF were applied on the simulated lesions with a microbrush for 10 s, then excess removed. The surface hardness was measured by means of Vickers indentation test. To trace the depth of penetration, up to 400 µm, of silver ions, elemental composition of the samples was observed using EDX, coupled with SEM, and measured every 50 µm from the surface towards the pulp chamber. Laser Induced Breakdown Spectroscopy (LIBS) was also employed to trace silver ion penetration; the atomic silver line 328.06 nm was used with a 60 µm laser spot size to a depth of 240 µm. Student's-t test identified significant differences between treatment groups for each depth and the Bonferroni test was used for statistical analysis of all groups (p < 0.05). Mean surface hardness values obtained were 111.2 MPa, 72.3 MPa, 103.3 MPa and 50.5 MPa for groups A, B, C and D respectively. There was a significant difference between groups A and C compared with groups B and D, the group treated with AgNCls/PMAA achieved the highest surface hardness, similar or higher than the sound dentin control. A constant presence of silver was observed throughout the depth of the sample for group A, while group B showed a peak concentration of silver at the surface with a significant drop beyond 50 µm. The 20% AgNCls/PMAA solution applied to simulated dentin caries lesions achieved the recovery of surface hardness equivalent to sound dentin with the penetration of silver ions throughout the depth of the lesion.

Agreement in quantification of removable prosthesis plaque area coverage using a semi-automated planimetric assessment method.

OBJECTIVES: To determine the agreement of removable dental prosthesis cleanliness as assessed by a semi-automated planimetric method between images captured by a digital single-lens reflex camera (DSLR) and smartphone. METHODS: A total of 97 participants with removable prostheses were recruited for the quantification of the prosthesis plaque area coverage. The colour images of stained prosthesis plaque were obtained using both a DSLR camera and a smartphone. The prosthesis plaque area coverage was analysed in two ways: (i) prosthesis cleanliness index (PCI) and (ii) percentage plaque area coverage (PPC). The PPC (continuous data) was converted to the PCI (categorical data) to provide prevalence ordinal scales and the agreements in PCI ratings were determined using weighted Kappa statistics. Agreement of PPC scores was determined through assessing directional, standardised directional, and absolute differences and correlation analyses. RESULTS: Weighted Kappa values of agreement between PCI categories were excellent (> 0.80) for all comparisons. The mean PPC was 24.79 % as determined by DSLR and 25.37 % as determined by smartphone. There was no statistically significant difference in the means of PPC between the DSLR and smartphone (P = 0.149). The standardised directional difference was 0.15 ('small'). The mean absolute difference was 2.77. The interclass correlation coefficient was 0.98 ('excellent'). CONCLUSIONS: This method showed almost perfect agreements and allowed for threshold-based plaque segmentation on the removable prostheses. There was substantial agreement between DSLR and smartphone assessment of prosthesis plaque area coverage as determined by a semi-automated planimetric assessment. CLINICAL SIGNIFICANCE: This semi-automated planimetric assessment method has implications for monitoring removable prosthesis hygiene initiatives by offering a valid, reliable, and quantitative method of assessment with potential use in managed care and community settings.

A qualitative analysis of dentists' understanding and management of non-carious cervical lesions (NCCL).

INTRODUCTION: Non-carious cervical lesions (NCCLs) are considered to have a multi-factorial aetiology and their management is affected by a range of variables perhaps most importantly clinical judgement. The aim of this study was to elicit information from practicing dentists, using interviews, to explore their understanding of NCCL aetiology, the decision-making criteria of when to restore, and the restorative techniques used to restore NCCLs. This may help identify gaps or anomalies in our understanding to inform future research and clinical practice for the management of NCCLs. METHODS: An interview guide was developed from a literature search which formed 2 domains framed around understanding and management of NCCLs based on: understanding of diagnosis and aetiology, and factors affecting decision making for management. Practicing dentists with more than 10 years of experience were purposively recruited to conduct in-depth, semi-structured interviews. Fifteen interviews were audio recorded and transcribed verbatim. A thematic content analysis was conducted and the results analysed. RESULTS: From the thematic analysis, 2 domains were identified. In the domain of "diagnosis and aetiology", while participants have similar understanding and methods of diagnosing NCCL, most stated NCCLs in a patient were caused by a "main aetiology" such as "abrasion", "abfraction" while few described the inter-relationship of these aetiological factors. In the domain of "factors affecting decision making". "Patient reported symptoms" and "lesion dimension" were the main factors that affected participants' decision to provide restorative or non-restorative management. However, a "restorative threshold" was not able to be identified. CONCLUSION: There was notable variety in participants' understanding of the aetiology, management, and treatment of NCCLs, particularly the restorative threshold of when to treat. CLINICAL SIGNIFICANCE: The variability demonstrates the need to have a clearer understanding of the key elements that affect the management of NCCLs and better information to support the decision of when to treat.

Morphology and mechanical performance of dental crown designed by 3D-DCGAN.

OBJECTIVES: This study utilised an Artificial Intelligence (AI) method, namely 3D-Deep Convolutional Generative Adversarial Network (3D-DCGAN), which is one of the true 3D machine learning methods, as an automatic algorithm to design a dental crown. METHODS: Six hundred sets of digital casts containing mandibular second premolars and their adjacent and antagonist teeth obtained from healthy personnel were machine-learned using 3D-DCGAN. Additional 12 sets of data were used as the test dataset, whereas the natural second premolars in the test dataset were compared with the designs in (1) 3D-DCGAN, (2) CEREC Biogeneric, and (3) CAD for morphological parameters of 3D similarity, cusp angle, occlusal contact point number and area, and in silico fatigue simulations with finite element (FE) using lithium disilicate material. RESULTS: The 3D-DCGAN design and natural teeth had the lowest discrepancy in morphology compared with the other groups (root mean square value = 0.3611). The Biogeneric design showed a significantly (p < 0.05) higher cusp angle (67.11°) than that of the 3D-DCGAN design (49.43°) and natural tooth (54.05°). No significant difference was observed in the number and area of occlusal contact points among the four groups. FE analysis showed that the 3D-DCGAN design had the best match to the natural tooth regarding the stress distribution in the crown. The 3D-DCGAN design was subjected to 26.73 MPa and the natural tooth was subjected to 23.97 MPa stress at the central fossa area under physiological occlusal force (300 N); the two groups showed similar fatigue lifetimes (F-N curve) under simulated cyclic loading of 100-400 N. Designs with Biogeneric or technician would yield respectively higher or lower fatigue lifetime than natural teeth. SIGNIFICANCE: This study demonstrated that 3D-DCGAN could be utilised to design personalised dental crowns with high accuracy that can mimic both the morphology and biomechanics of natural teeth.

Proteomic profile of in situ acquired pellicle on tooth and restorative material surfaces.

OBJECTIVES: To evaluate and compare the proteomic profile of acquired pellicle on smooth bovine tooth and tooth-coloured restorative materials, including resin composite (RC), glass ionomer cement (GIC), and casein phosphopeptide-amorphous calcium phosphate modified GIC (CPP-ACP GIC). METHODS: Two-hour in situ pellicles on tooth/materials specimens mounted in oral appliances worn by ten healthy adults were investigated. Pellicle proteins and corresponding unstimulated whole saliva were quantitatively analysed through liquid chromatography-tandem mass spectrometry. RESULTS: Significantly higher amounts of protein were adsorbed onto tooth surface than restorative materials tested (4.11 ± 0.69 vs. 2.54 ± 0.38/2.98 ± 0.80/3.01 ± 0.37 µg, RC/GIC/CPP-ACP GIC). From the ten participants, 1,444 (487-1,086/person), 1,454 (645-1,051/person), 1,731 (454-1,475/person), or 1,597 (423-1,261/person) pellicle proteins were detected at least once on bovine tooth, RC, GIC, or CPP-ACP GIC, respectively, and with 1,072 (304-793/person) salivary proteins identified. Comparative quantification revealed minor differences between tooth and restorative materials pellicle profiles. High inter-individual variations in pellicle protein composition were demonstrated. Compared to the salivary protein profile, 214/57 proteins showed significantly increased/decreased abundance in pellicle formed on at least one substrate (fold change > 3.325/fold change < 0.301). Gene Ontology enrichment analysis showed some pellicle proteins detected with increased affinity to tooth/material surface were identified as being related to "calcium-dependent protein binding" or "cell-cell adhesion mediator activity". CONCLUSION: Similar protein quantity and composition was observed in 2 h in situ pellicles formed on different smooth restorative material surfaces. The proteomic profile of pellicles appeared distinct from that of the corresponding unstimulated whole saliva. CLINICAL SIGNIFICANCE: Host backgrounds appeared more influential on the proteomic profile of the in situ acquired pellicle than the underlying substrate characteristics among systemically and orally healthy adults. Pellicle proteins preferentially adsorbed on tooth/materials were putatively associated with calcium ion homeostasis or host-microbiota interaction.

Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler.

Theobromine (TB) has been reported to promote tooth remineralization, strengthen tooth substance, and relieve dentin hypersensitivity. This study aimed to evaluate experimental tooth coating materials containing TB and surface pre-reacted glass-ionomer (S-PRG) fillers by examining the effects on bacterial adhesion and antibacterial properties. In addition, the amount of TB eluted from the coating material was measured. There was no significant difference in bacterial adhesion depending on the presence or absence of TB in the coating material, however, a significant decrease in the amount of bacterial adhesion was observed when S-PRG fillers were added to the coating material. The amount of eluted TB did not differ depending on the type of the filler in the coating material. It was suggested that TB could be used to develop a new dental material with the potential ability to inhibit the initiation and progression of dental caries.

Surface gloss, gloss retention, and color stability of 2 nano-filled universal resin composites.

Objectives: This study compared the surface gloss (SG), gloss retention (GR), and color stability (CS) of 2 universal resin composites after chemical (CA) and mechanical (MA) aging. Materials and Methods: Twenty disc-shaped samples of G-ænial A´Chord (GC-Europe) and Filtek Universal (3M-ESPE) were polished with sequential abrasive papers. For CA, specimens were stored in 1 mL of 75% ethanol for 15 days at 37°C, and readings (SG, GR, and CS) were obtained at baseline and 5, 10, and 15 days. For MA, specimens were subjected to 10,750 simulated brushing cycles. SG and CS were evaluated after every 3,583 cycles. SG was measured with a glossmeter (geometrical configuration: 60°), and values were expressed in gloss units. Color was measured with a spectrophotometer using the CIE-L*a*b* color system. The Student's t-test, 1-way analysis of variance, and Scheffé test were used for statistical analysis (α = 0.05). Results: G-ænial presented significantly higher SG values than Filtek (p = 0.02), with GR reductions of 5.2% (CA) and 5.3% (MA) for G-ænial and 7.6% (CA) and 7.2% (MA) for Filtek. The aging protocol had no statistically significant effect on SG or GR (p = 0.25) from baseline to the final readings. G-ænial-MA presented the lowest color difference (∆E = 1.8), and G-ænial-CA and Filtek-CA had the largest changes (∆E = 8.6 and ∆E = 11.8, respectively). Conclusion: G-ænial presented higher SG values and better CS. Both restorative materials demonstrated acceptable GR and CS. Aging protocols impacted these properties negatively.

A Narrative Review of Bioactive Glass-Loaded Dental Resin Composites.

This review aims to provide a comprehensive analysis of the characterizations of bioactive glass (BAG)-loaded dental resin-based composite materials. Online databases (Web of Science, PubMed, and Science Direct) were used to collect data published from January 2011 to January 2022. Only BAG-containing resin adhesive and resin restorative composites are discussed in this narrative review. BAG-loaded resin composites exhibit excellent mineralization ability reflecting enhanced ion release, pH elevation, and apatite formation, especially regarding high BAG loading. This aids the anti-demineralization and remineralization of teeth. Furthermore, BAG-loaded resin composites demonstrated in vitro biocompatibility and antibacterial performance. It has been suggested that BAG fillers with small particle sizes and no more than 20 wt% in terms of loading amount should be used to guarantee the appropriate mechanical properties of resin composites. However, most of these studies focused on one or some aspects using different resin systems, BAG types, and BAG amounts. As such, this makes the comparison difficult, and it is essential to find an optimal balance between different properties. BAG-loaded resin composites can be regarded as bioactive materials, which present major benefits in dentistry, especially their capability in the bacterial inhibition, cell biocompatibility, anti-demineralization, and remineralization of teeth.

Color changes and shear bond strength to simulated caries lesions treated with a novel solution of 20% silver nanoclusters in polymethacrylic acid.

The aims of the study were: (1) To compare the staining effect on demineralized dentin simulating caries between silver nanoclusters (AgNCls) synthesized using polymethacrylic acid (PMAA) and silver diammine fluoride (SDF), and (2) to measure the shear bond strength (SBS) of a glass ionomer cement (GIC) to simulated caries lesions with and without the application of AgNCls/PMAA or SDF. Dentine blocks 4 mm thick from twenty-four non-carious third molars were sectioned and coated with nail varnish (Revlon, New York, USA). Simulated caries lesions on occlusal dentin surfaces were created (66 h in 0.05 M acetate buffer 2.2 mM calcium/phosphate pH 5.0). Specimens were divided into groups and treated with (n = 8): (A) 20% AgNCls/PMAA; (B) SDF 38% (Fagamin, Tedequim, Córdoba, Argentina); or (C) without treatment. AgNCls/PMAA or SDF were applied on the exposed surfaces with a microbrush for 10 s. Samples were incubated for 24 h at 37 °C at 100% relative humidity. Surface color was measured according to the CIE-L*a*b* system before and after demineralization (R0 and R1), 24 h and one week after treatment (R2 and R3), using a spectrophotometer (CM-600D Konica Minolta Sesing Inc., Japan). Groups A and B received an extra application of AgNCls/PMAA or SDF before a conventional GIC (Fuji IX-Gold Label, GC Corp, Tokyo, Japan) was bonded using a mold, 4 mm diameter × 3 mm high. For SBS, a Universal Testing Machine (Digimess RS-8000-5, China)-crosshead speed of 1 mm/min-was used. Statistical analysis was performed using ANOVA, Student-t and Scheffe-test at a significance of p < 0.05. Group A presented a stable color p = 0.24 between R1-R2 and R1-R3 in contrast to significant color changes in Group B (p = 0.02). SBS was higher (p < 0.01) in Group A (10.4 ± 2.7 MPa) compared to Groups B (3.3 ± 1.3 MPa) and C (4.0 ± 0.4 MPa), where no differences between the latter groups were observed (p = 0.77). Results of this preliminary study demonstrated that 20% AgNCls/PMAA did not stain simulated carious dentin and improved SBS of the GIC. The relevance of this study relies on the development of a therapeutic system to potentially arrest caries lesions without staining.