ABSTRACT
Recent work has disclosed the critical role played by enamel peptides in sex classification of old skeletal remains. In particular, protein AMELY (amelogenin isoform Y) is present in the enamel dental tissue of male individuals only, while AMELX (isoform X) can be found in both sexes. AMELY can be easily detected by LC-MS/MS in the ion extracted chromatograms of the SM(ox)IRPPY peptide (monoisotopic [M + 2 H]+2 mass = 440.2233 m/z). In this paper, we exploited the dimorphic features of the amelogenin protein to determine the sex of the so-called 'Lovers of Modena', two Late Antique individuals whose skeletons were intentionally buried hand-in-hand. Upon discovery, mass media had immediately assumed they were a male-female couple, even if bad preservation of the bones did not allow an effective sex classification. We were able to extract proteins from the dental enamel of both individuals (~1600 years old) and to confidently classify them as males. Results were compared to 14 modern and archaeological control samples, confirming the reliability of the ion chromatogram method for sex determination. Although we currently have no information on the actual relationship between the 'Lovers of Modena' (affective? Kin-based?), the discovery of two adult males intentionally buried hand-in-hand may have profound implications for our understanding of funerary practices in Late Antique Italy.
Subject(s)
Amelogenin/genetics , Dental Enamel Proteins/genetics , Dental Enamel/metabolism , Paleontology/methods , Peptide Fragments/metabolism , Sex Determination Analysis/methods , Amelogenin/metabolism , Dental Enamel Proteins/metabolism , Female , Humans , Italy , Male , Peptide Fragments/analysis , Polymerase Chain ReactionABSTRACT
OBJECTIVES: Exact symmetry and perfect balance between opposite jaw halves, as well as between antagonistic teeth, is not frequently observed in natural masticatory systems. Research results show that asymmetry in our body, skull, and jaws is often related to genetic, epigenetic, environmental and individual ontogenetic factors. Our study aims to provide evidence for a significant link between masticatory asymmetry and occlusal contact between antagonist teeth by testing the hypothesis that tooth inclination is one of the mechanisms driving distribution of wear in masticatory phases in addition to dietary and cultural habits. MATERIALS AND METHODS: The present work investigates the relationship between dental macrowear patterns and tooth inclinations on a sample of complete maxillary and mandibular 3D models of dental arches from 19 young and adult Yuendumu Aboriginal individuals. The analysis was carried out on first molars (M1) from all quadrants. Occlusal Fingerprint Analysis was used for the quantification of macrowear patterns, and 2D cross-sectional geometric analysis was carried out to investigate asymmetry in dental arches. RESULTS: The asymmetry is highly variable on both arches, and it is associated with differences in the inclination of upper M1 crowns. Each molar has variable inclination (buccal/lingual) which influence tooth to tooth contact, producing greater or lesser variation in wear pattern. Interindividual variability of morphological variation of the occlusal relationship has to be considered in macrowear analysis. DISCUSSION: Our results suggest that overall asymmetry in the masticatory apparatus in modern humans affects occlusal contact areas between antagonist teeth influencing macrowear and chewing efficiency during ontogeny.
Subject(s)
Dental Arch/anatomy & histology , Molar/anatomy & histology , Native Hawaiian or Other Pacific Islander , Tooth Wear/pathology , Adolescent , Adult , Anthropology, Physical , Anthropometry , Child , Deglutition/physiology , Female , Humans , Male , Young AdultABSTRACT
The 4th century BC marks the main entrance of Celtic populations in northern Italy. Their arrival has been suggested based on the presence of Celtic customs in Etruscan mortuary contexts, yet up to now few bioarchaeological data have been examined to support or reject the arrival of these newcomers. Here we use strontium isotopes, non-metric dental traits and funerary patterns to unravel the biocultural structure of the necropolis of Monterenzio Vecchio (Bologna, Italy). Subsamples of our total sample of 38 individuals were analyzed based on different criteria characterizing the following analyses: 1) strontium isotope analysis to investigate migratory patterns and provenance; 2) non-metric dental traits to establish biological relationships between Monterenzio Vecchio, 13 Italian Iron age necropolises and three continental and non-continental Celtic necropolises; 3) grave goods which were statistically explored to detect possible patterns of cultural variability. The strontium isotopes results indicate the presence of local and non-local individuals, with some revealing patterns of mobility. The dental morphology reveals an affinity between Monterenzio Vecchio and Iron Age Italian samples. However, when the Monterenzio Vecchio sample is separated by isotopic results into locals and non-locals, the latter share affinity with the sample of non-continental Celts from Yorkshire (UK). Moreover, systematic analyses demonstrate that ethnic background does not retain measurable impact on the distribution of funerary elements. Our results confirm the migration of Celtic populations in Monterenzio as archaeologically hypothesized on the basis of the grave goods, followed by a high degree of cultural admixture between exogenous and endogenous traits. This contribution shows that combining different methods offers a more comprehensive perspective for the exploration of biocultural processes in past and present populations.
Subject(s)
Culture , Funeral Rites/history , Population Dynamics/history , Tooth/anatomy & histology , Tooth/chemistry , Cluster Analysis , Female , History, Ancient , Humans , Italy , Male , Strontium Isotopes/analysis , United Kingdom/ethnologyABSTRACT
Enamel thickness figures prominently in studies of human evolution, particularly for taxonomy, phylogeny, and paleodietary reconstruction. Attention has focused on molar teeth, through the use of advanced imaging technologies and novel protocols. Despite the important results achieved thus far, further work is needed to investigate all tooth classes. We apply a recent approach developed for anterior teeth to investigate the 3D enamel thickness of Neandertal and modern human (MH) canines. In terms of crown size, the values obtained for both upper and lower unworn/slightly worn canines are significantly greater in Neandertals than in Upper Paleolithic and recent MH. The 3D relative enamel thickness (RET) is significantly lower in Neandertals than in MH. Moreover, differences in 3D RET values between the two groups appear to decrease in worn canines beginning from wear stage 3, suggesting that both the pattern and the stage of wear may have important effects on the 3D RET value. Nevertheless, the 3D average enamel thickness (AET) does not differ between the two groups. In both groups, 3D AET and 3D RET indices are greater in upper canines than in lower canines, and overall the enamel is thicker on the occlusal half of the labial aspect of the crown, particularly in MH. By contrast, the few early modern humans investigated show the highest volumes of enamel while for all other components of 3D enamel, thickness this group holds an intermediate position between Neandertals and recent MH. Overall, our study supports the general findings that Neandertals have relatively thinner enamel than MH (as also observed in molars), indicating that unworn/slightly worn canines can be successfully used to discriminate between the two groups. Further studies, however, are needed to understand whether these differences are functionally related or are the result of pleiotropic or genetic drift effects.
Subject(s)
Dental Enamel/anatomy & histology , Fossils/anatomy & histology , Molar/anatomy & histology , Neanderthals/anatomy & histology , Paleodontology , Tooth/anatomy & histology , X-Ray Microtomography/methods , Animals , Humans , Imaging, Three-DimensionalABSTRACT
OBJECTIVES: This study investigates the effect of allometry on the shape of lower dm2 (dm2) and lower M1 (M1) crown outlines and examines whether the trajectory and magnitude of allometric scaling are shared between Neandertals and Homo sapiens. METHODS: Our sample included 164 specimens: 57 recent H. sapiens, 44 Upper Paleolithic H. sapiens, 17 early H. sapiens, and 46 Neandertals. Of these, 59 represent dm2/M1 pairs from the same individuals. Occlusal photographs were used to obtain crown shapes of dm2s and M1s. Principal components analysis (PCA) of the matrix of shape coordinates was used to explore the pattern of morphological variation across the dm2 and M1 samples. Allometry was investigated by means of the Pearson product-moment correlation coefficient. Two-block partial least squares (2B-PLS) analysis was used to explore patterns of covariation between dm2 and M1 crown outlines of matched individual pairs. RESULTS: The PCA confirmed significant differences between Neandertal and H. sapiens dm2 and M1 shapes. Allometry accounted for a small but statistically significant proportion of the total morphological variance. The magnitude of the allometric contribution to crown shape was stronger among Neandertals than among H. sapiens. However, we could not reject the null hypothesis that the two species share the same allometric trajectory. The 2B-PLS analysis of the pooled sample of paired individuals revealed a significant correlation in crown shape between dm2 and M1. While Procrustes distances differed significantly between dm2 and M1 in Neandertals, it did not among H. sapiens groups. CONCLUSIONS: Our results confirm several of the results obtained by a similar study of upper dm2/M1 (dm(2)/M(1)), but there are differences as well. Neandertal dm2/M1 shapes are less derived than those of the dm(2)/M(1). Such differences may support previous studies, which have suggested that different developmental and/or epigenetic factors affect the upper and lower dentitions.
Subject(s)
Molar/anatomy & histology , Neanderthals/anatomy & histology , Tooth Crown/anatomy & histology , Tooth, Deciduous/anatomy & histology , Animals , Anthropology, Physical , Fossils , Humans , Molar/pathology , Odontometry , Tooth Crown/pathology , Tooth, Deciduous/pathologyABSTRACT
Despite the general increase in digital techniques for dental morphometric analyses, only a few methods are available to study worn teeth. Moreover, permanent dentitions are studied much more frequently than deciduous teeth. In this study, we address both issues by providing a taxonomic classification of Neanderthal and modern human (MH) lower second deciduous molars (dm(2) s) through the analysis of crown and cervical outlines. Crown and cervical outlines were obtained from a three-dimensional (3D) digital sample of uniformly oriented dm(2) s. Both outlines were centered on the centroid of their area and represented by 16 pseudolandmarks obtained by equiangularly spaced radial vectors out of the centroid. We removed size information from the oriented and centered outlines with a uniform scaling of the pseudolandmark configurations to unit Centroid Size. Group shape variation was evaluated separately for the dm(2) crown and cervical outlines through a shape-space principal component (PC) analysis. Finally, quadratic discriminant analysis of a subset of PCs was used to classify the specimens. Our results demonstrate that both outlines successfully separate the two groups. Neanderthals showed a buccodistal expansion and convex lingual outline shape, whilst MHs have buccodistal reduction and straight lingual outline shape. Therefore, we confirmed that the cervical outline represents an effective parameter for distinguishing between the two taxa when dealing with worn or damaged dm(2) s.