ABSTRACT
PURPOSE: Unicompartmental knee arthroplasty (UKA) provides patients with an alternative treatment to TKA in isolated medial compartment osteoarthritis providing better functional outcomes and faster recovery in the short term. Our aim was to quantify revision rates, predictors of revision, mortality rate and functionality of the Oxford Phase 3 UKA in a non-designer institution. METHODS: This was a retrospective review of prospectively collected regional registry data. All Oxford Phase 3 UKAs performed for medial tibio-femoral osteoarthritis of the knee joint were included from a single academic institution between the period of January 1st 2006 and December 30th 2009. Kaplan-Meier survivorship curves adjusting for loss to follow-up and deceased patients were generated. Primary outcome variables included all-cause and aseptic revision. Secondary outcome variables included functional outcome scores. Patients were reviewed at 6 months, 2 years, 5 years, 10 years and 15 years. RESULTS: A total of 64 cemented Oxford phase 3 UKAs were performed between January 2006 and November 2009. Fifteen-year follow-up data were available for 51 patients, of these 12 required revision. Survival rates, adjusting for patients that were either lost to follow-up or deceased, were 87.5% at 5 years, 81.4% at 10 years and 76.4% at 15 years. The overall aseptic revision rate at the time of review was 18.75% (n = 12). The only significant predictor of postoperative WOMAC score at 15 years was the preoperative WOMAC score (p = 0.03). CONCLUSION: The Oxford Phase 3 UKA for medial tibio-femoral arthritis has promising outcomes at 15-year follow-up with a survival rate of 76.4% in a non-designer centre. LEVEL OF EVIDENCE: III.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Osteoarthritis, Knee , Humans , Knee Joint , Reoperation , Retrospective Studies , Treatment OutcomeABSTRACT
The oxygenation of early Earth's atmosphere during the Great Oxidation Event, is generally accepted to have been caused by oceanic Cyanobacterial oxygenic photosynthesis. Recent studies suggest that Fe(II) toxicity delayed the Cyanobacterial expansion necessary for the GOE. This study investigates the effects of Fe(II) on two Cyanobacteria, Pseudanabaena sp. PCC7367 and Synechococcus sp. PCC7336, in a simulated shallow-water marine Archean environment. A similar Fe(II) toxicity response was observed as reported for closed batch cultures. This toxicity was not observed in cultures provided with continuous gaseous exchange that showed significantly shorter doubling times than the closed-culture system, even with repeated nocturnal addition of Fe(II) for 12 days. The green rust (GR) formed under high Fe(II) conditions, was not found to be directly toxic to Pseudanabaena sp. PCC7367. In summary, we present evidence of diurnal Fe cycling in a simulated shallow-water marine environment for two ancestral strains of Cyanobacteria, with increased O2 production under anoxic conditions.
Subject(s)
Aquatic Organisms/metabolism , Archaea/metabolism , Circadian Rhythm , Iron/metabolism , Oxygen/metabolism , Aquatic Organisms/drug effects , Aquatic Organisms/growth & development , Archaea/drug effects , Archaea/growth & development , Atmosphere , Chlorophyll A/metabolism , Iron/toxicity , Models, Biological , SeawaterABSTRACT
The formation of iron-sulfur-arsenic (Fe-S-As) minerals during biogeochemical processes in As contaminated aquifers remains poorly understood despite their importance to understanding As release and transport in such systems. In this study, X-ray absorption and Mössbauer spectroscopies complemented by electron microscopy, and chemical extractions were used to examine vertical changes of As, Fe and S speciation for the example of sediments in the Hetao Basin. Reduction of Fe(III), As(V) and SO42- species were shown to co-occur in the aquifers. Iron oxides were observed to be predominantly goethite and hematite (36 - 12%) and appeared to decrease in abundance with depth. Furthermore, reduced As (including arsenite and As sulfides) and sulfur species (including S(-II), S(-I) and S0) increased from 16% to 76% and from 13% to 44%, respectively. Iron oxides were the major As carrier in the sediments, and the lower groundwater As concentration consists with less desorbable and reducible As in the sediments. The formation of As-Fe sulfides (e.g., As containing pyrite and greigite) induced by redox heterogeneities likely contribute to localized lower groundwater As concentrations. These results help to further elucidate the complex relationship between biogeochemical processes and minerals formation in As contaminated aquifers.
ABSTRACT
The coronavirus disease 2019 pandemic has meant that there is growing pressure on hospital resources, not least the availability of appropriate personal protective equipment (PPE), particularly face masks and respirator masks. Within the field of orthopaedic surgery, it is a common sight to see surgeons wearing 'space suits' (SSs) which comprise a helmet, hood and surgical gown. In this study, the authors made modifications to two different SS systems to incorporate a high-efficiency particulate air (HEPA) filter into the fan inlet to assess their potential as re-usable PPE systems for surgeons with regard to protection from a virus spread via respiratory droplets. The testing was carried out using particle counters upstream and downstream on a mannequin wearing two different SS systems with and without modifications to the fan inlet. The results show that using a layer of HEPA filter, cut to size and sealed to the fan inlet in the helmet, will reduce downstream particulates at the user's mouth by >99.5%; this is equivalent to a respirator mask. HEPA filter material is relatively cheap and can be used repeatedly, making this a viable alternative to disposable, and even resterilized, respirator masks in the setting of a respiratory-droplet-spread viral pandemic.
Subject(s)
COVID-19/transmission , Infectious Disease Transmission, Patient-to-Professional/prevention & control , Orthopedic Procedures/standards , Personal Protective Equipment/supply & distribution , Air Filters/statistics & numerical data , Air Filters/trends , COVID-19/diagnosis , COVID-19/epidemiology , COVID-19/virology , Head Protective Devices , Humans , Manikins , Masks , Orthopedic Procedures/statistics & numerical data , Particulate Matter/analysis , Pilot Projects , Respiratory Protective Devices/statistics & numerical data , Respiratory Protective Devices/trends , SARS-CoV-2/genetics , Space Suits/trends , Space Suits/virologyABSTRACT
Cadmium (Cd) adversely affects human health by entering the food chain via anthropogenic activity. In order to mitigate risk, a better understanding of the biogeochemical mechanisms limiting Cd mobility in the environment is needed. While Cd is not redox-active, Cd speciation varies (i.e., aqueous, complexed, adsorbed), and influences mobility. Here, the cycling of Cd in relation to initial speciation during the growth of Geobacter sulfurreducens was studied. Either fumarate or ferrihydrite (Fh) was provided as an electron acceptor and Cd was present as: (1) an aqueous cation, (2) an aqueous complex with cysteine, which is often present in metal stressed soil environments, or (3) adsorbed to Fh. During microbial Fe(iii) reduction, the removal of Cd was substantial (â¼80% removal), despite extensive Fe(ii) production (ratio Fe(ii)total : Fetotal = 0.8). When fumarate was the electron acceptor, there was higher removal from solution when Cd was complexed with cysteine (97-100% removal) compared to aqueous Cd (34-50%) removal. Confocal laser scanning microscopy (CLSM) demonstrated the formation of exopolymeric substances (EPS) in all conditions and that Cd was correlated with EPS in the absence of Fe minerals (r = 0.51-0.56). Most notable is that aqueous Cd was more strongly correlated with Geobacter cells (r = 0.72) compared to Cd-cysteine complexes (r = 0.51). This work demonstrates that Cd interactions with cell surfaces and EPS, and Cd solubility during metabolic activity are dependent upon initial speciation. These processes may be especially important in soil environments where sulfur is limited and Fe and organic carbon are abundant.
Subject(s)
Cysteine/chemistry , Geobacter , Iron , Adsorption , Cadmium , Ferric Compounds , Minerals , Oxidation-ReductionABSTRACT
Mixed-valent iron [Fe(II)-Fe(III)] minerals such as magnetite and green rust have received a significant amount of attention over recent decades, especially in the environmental sciences. These mineral phases are intrinsic and essential parts of biogeochemical cycling of metals and organic carbon and play an important role regarding the mobility, toxicity, and redox transformation of organic and inorganic pollutants. The formation pathways, mineral properties, and applications of magnetite and green rust are currently active areas of research in geochemistry, environmental mineralogy, geomicrobiology, material sciences, environmental engineering, and environmental remediation. These aspects ultimately dictate the reactivity of magnetite and green rust in the environment, which has important consequences for the application of these mineral phases, for example in remediation strategies. In this review we discuss the properties, occurrence, formation by biotic as well as abiotic pathways, characterization techniques, and environmental applications of magnetite and green rust in the environment. The aim is to present a detailed overview of the key aspects related to these mineral phases which can be used as an important resource for researchers working in a diverse range of fields dealing with mixed-valent iron minerals.
ABSTRACT
INTRODUCTION: The General Medical Council (GMC) of the UK states that doctors have a duty to train and contribute to the education of colleagues, and that those involved in formal clinical teaching should have a teaching qualification. OBJECTIVES: We sought to evaluate the current levels of engagement of surgical trainees and recently appointed surgical consultants in clinical teaching. METHODS: All trainees who commenced a basic or higher surgical training post during or after 2007 were invited to participate. The electronic questionnaire was administered using the survey tool GetFeedback, collecting information regarding subspecialty, current role, quantity of teaching that respondents engaged in and who they taught and teaching motivations and barriers. RESULTS: There were 128 respondents out of 358 invitations to participate (36% response rate). Less than half (39%) of respondents had attended formal courses on clinical education. Over 70% of respondents engaged in clinical teaching for two or more hours each week. A lack of time and resources were noted as barriers to engaging in teaching. We found a low number of those involved in teaching seeking feedback after teaching sessions. CONCLUSION: In surgery, the apprenticeship model is still the framework for developing the surgeons of the future. In attempting to produce a highly skilled workforce for the future, we rely on those in senior positions to train those coming through; higher surgical trainees are relied on to teach the core surgical trainees and so on. Our study shows a low level of formalisation of this model.
Subject(s)
Education, Medical, Graduate/trends , General Surgery/education , Teaching/trends , Female , Hospitals , Humans , Ireland , Male , Surveys and QuestionnairesABSTRACT
In this study, we couple iron isotope analysis to microscopic and mineralogical investigation of iron speciation during circumneutral Fe(II) oxidation and Fe(III) precipitation with photosynthetically produced oxygen. In the presence of the cyanobacterium Synechococcus PCC 7002, aqueous Fe(II) (Fe(II)aq) is oxidized and precipitated as amorphous Fe(III) oxyhydroxide minerals (iron precipitates, Feppt), with distinct isotopic fractionation (ε56Fe) values determined from fitting the δ56Fe(II)aq (1.79 and 2.15) and the δ56Feppt (2.44 and 2.98) data trends from two replicate experiments. Additional Fe(II) and Fe(III) phases were detected using microscopy and chemical extractions and likely represent Fe(II) and Fe(III) sorbed to minerals and cells. The iron desorbed with sodium acetate (FeNaAc) yielded heavier δ56Fe compositions than Fe(II)aq. Modeling of the fractionation during Fe(III) sorption to cells and Fe(II) sorption to Feppt, combined with equilibration of sorbed iron and with Fe(II)aq using published fractionation factors, is consistent with our resulting δ56FeNaAc. The δ56Feppt data trend is inconsistent with complete equilibrium exchange with Fe(II)aq. Because of this and our detection of microbially excreted organics (e.g., exopolysaccharides) coating Feppt in our microscopic analysis, we suggest that electron and atom exchange is partially suppressed in this system by biologically produced organics. These results indicate that cyanobacteria influence the fate and composition of iron in sunlit environments via their role in Fe(II) oxidation through O2 production, the capacity of their cell surfaces to sorb iron, and the interaction of secreted organics with Fe(III) minerals.
Subject(s)
Ferrous Compounds/chemistry , Synechococcus/metabolism , Ferric Compounds/chemistry , Iron/chemistry , Iron Isotopes/chemistry , Oxidation-Reduction , OxygenABSTRACT
Most described nitrate-reducing Fe(II)-oxidizing bacteria (NRFeOB) are mixotrophic and depend on organic cosubstrates for growth. Encrustation of cells in Fe(III) minerals has been observed for mixotrophic NRFeOB but not for autotrophic phototrophic and microaerophilic Fe(II) oxidizers. So far, little is known about cell-mineral associations in the few existing autotrophic NRFeOB. Here, we investigate whether the designated autotrophic Fe(II)-oxidizing strain (closely related to Gallionella and Sideroxydans) or the heterotrophic nitrate reducers that are present in the autotrophic nitrate-reducing Fe(II)-oxidizing enrichment culture KS form mineral crusts during Fe(II) oxidation under autotrophic and mixotrophic conditions. In the mixed culture, we found no significant encrustation of any of the cells both during autotrophic oxidation of 8 to 10 mM Fe(II) coupled to nitrate reduction and during cultivation under mixotrophic conditions with 8 to 10 mM Fe(II), 5 mM acetate, and 4 mM nitrate, where higher numbers of heterotrophic nitrate reducers were present. Two pure cultures of heterotrophic nitrate reducers (Nocardioides and Rhodanobacter) isolated from culture KS were analyzed under mixotrophic growth conditions. We found green rust formation, no cell encrustation, and only a few mineral particles on some cell surfaces with 5 mM Fe(II) and some encrustation with 10 mM Fe(II). Our findings suggest that enzymatic, autotrophic Fe(II) oxidation coupled to nitrate reduction forms poorly crystalline Fe(III) oxyhydroxides and proceeds without cellular encrustation while indirect Fe(II) oxidation via heterotrophic nitrate-reduction-derived nitrite can lead to green rust as an intermediate mineral and significant cell encrustation. The extent of encrustation caused by indirect Fe(II) oxidation by reactive nitrogen species depends on Fe(II) concentrations and is probably negligible under environmental conditions in most habitats.IMPORTANCE Most described nitrate-reducing Fe(II)-oxidizing bacteria (NRFeOB) are mixotrophic (their growth depends on organic cosubstrates) and can become encrusted in Fe(III) minerals. Encrustation is expected to be harmful and poses a threat to cells if it also occurs under environmentally relevant conditions. Nitrite produced during heterotrophic denitrification reacts with Fe(II) abiotically and is probably the reason for encrustation in mixotrophic NRFeOB. Little is known about cell-mineral associations in autotrophic NRFeOB such as the enrichment culture KS. Here, we show that no encrustation occurs in culture KS under autotrophic and mixotrophic conditions while heterotrophic nitrate-reducing isolates from culture KS become encrusted. These findings support the hypothesis that encrustation in mixotrophic cultures is caused by the abiotic reaction of Fe(II) with nitrite and provide evidence that Fe(II) oxidation in culture KS is enzymatic. Furthermore, we show that the extent of encrustation caused by indirect Fe(II) oxidation by reactive nitrogen species depends on Fe(II) concentrations and is probably negligible in most environmental habitats.
Subject(s)
Bacteria/metabolism , Ferrous Compounds/metabolism , Minerals/metabolism , Nitrates/metabolism , Acetates/metabolism , Bacteria/genetics , Bacteria/growth & development , Chemoautotrophic Growth , Ferric Compounds/metabolism , Nitrites/metabolism , Oxidation-ReductionABSTRACT
The art of symphysiotomy for delivery in the instance of cephalopelvic disproportion has been a dying art since the advent of caesarean section but in Ireland this surgical procedure was not abolished until 1992. This practice is still present in the developing world and in some circumstances used in developed countries. This study offers some insights on the 40-year follow-up of patients who had undergone symphysiotomy.
Subject(s)
Low Back Pain/etiology , Mobility Limitation , Symphysiotomy/adverse effects , Urination Disorders/etiology , Adolescent , Adult , Aged , Follow-Up Studies , Humans , Ireland , Middle Aged , Postoperative Complications/etiology , Retrospective Studies , Surveys and Questionnaires , Time Factors , Young AdultABSTRACT
Although there are numerous examples of large-scale commercial microbial synthesis routes for organic bioproducts, few studies have addressed the obvious potential for microbial systems to produce inorganic functional biomaterials at scale. Here we address this by focusing on the production of nanoscale biomagnetite particles by the Fe(III)-reducing bacterium Geobacter sulfurreducens, which was scaled up successfully from laboratory- to pilot plant-scale production, while maintaining the surface reactivity and magnetic properties which make this material well suited to commercial exploitation. At the largest scale tested, the bacterium was grown in a 50 l bioreactor, harvested and then inoculated into a buffer solution containing Fe(III)-oxyhydroxide and an electron donor and mediator, which promoted the formation of magnetite in under 24 h. This procedure was capable of producing up to 120 g of biomagnetite. The particle size distribution was maintained between 10 and 15 nm during scale-up of this second step from 10 ml to 10 l, with conserved magnetic properties and surface reactivity; the latter demonstrated by the reduction of Cr(VI). The process presented provides an environmentally benign route to magnetite production and serves as an alternative to harsher synthetic techniques, with the clear potential to be used to produce kilogram to tonne quantities.
Subject(s)
Geobacter/chemistry , Geobacter/metabolism , Magnetite Nanoparticles/chemistry , Oxidation-ReductionABSTRACT
This study assessed the effect on magnetic susceptibility and organic matter content of arable soil by irrigation with either treated sewage or groundwater. Results indicated that organic matter and magnetic susceptibility values in the soil irrigated with sewage were increased by 7.1 % and 13.5 %, respectively, compared to agricultural soil that irrigated with groundwater. Both the sewage and groundwater irrigated soils contained a significant fraction of ultrafine superpara magnetic grains, as indicated by high frequency dependent susceptibility (χfd > 6 %). The enhancement of soil magnetic properties was determined to be caused by anthropogenic sewage irrigation and agrochemical use by investigation of vertical soil profiles. Magnetic susceptibility parameters were shown to be significantly correlated with organic matter content (y = 0.0057x + 1.3439, R(2) = 0.09, p < 0.05). This work indicates that measurements of magnetic susceptibility may offer a rapid first step for identifying the potential pollution in arable soils.
Subject(s)
Agricultural Irrigation , Groundwater/analysis , Organic Chemicals/analysis , Sewage/analysis , Soil Pollutants/analysis , Soil/chemistry , China , Environmental Monitoring/methods , Geography , MagneticsABSTRACT
PURPOSE: Pacing strategies have been reported to occur during continuous cyclical exercises. However, currently no studies have examined if pacing takes place during repeated maximal voluntary muscle contractions (MVCs). Accordingly, the purpose of this study was to examine if informing subjects on the number of MVCs they would perform would affect force and root mean squared electromyography (EMG), during similar fatiguing protocols. METHODS: Thirty well-trained male subjects completed three fatiguing protocols in a randomized order. In the control condition participants were informed they would perform 12 MVCs, and then completed all 12. In the unknown condition they were not told how many MVCs they would perform, but were stopped after 12. Lastly, in the deception condition they were initially told they would perform only 6 MVCs, but after the 6 contractions they were asked to perform a few more repetitions and were stopped after 12. RESULTS: Compared to the unknown condition, subjects demonstrated greater forces (p < 0.05, ES = 0.35-1.14, 2-7.5%) and biceps EMG (p < 0.05, ES = 0.6, 6%) in the deception condition during the first six MVCs. Additionally, under all conditions subjects applied greater forces in the last repetition (#12) relative to the previous one (#11) (p < 0.06, ES = 0.36-0.5, 2.8-3.8%). CONCLUSIONS: The anticipation of performing a certain number of MVCs led the subjects to utilize different pacing strategies. The results also question the assumption that subjects followed the instruction to exert maximal effort during repeated MVCs.
Subject(s)
Isometric Contraction , Muscle Fatigue , Muscle, Skeletal/physiology , Physical Endurance , Volition , Adult , Anticipation, Psychological , Deception , Electromyography , Exercise Test , Humans , Male , Newfoundland and Labrador , Time Factors , Young AdultABSTRACT
Peri-prosthetic osteolysis and subsequent aseptic loosening is the most common reason for revising total hip replacements. Wear particles originating from the prosthetic components interact with multiple cell types in the peri-prosthetic region resulting in an inflammatory process that ultimately leads to peri-prosthetic bone loss. These cells include macrophages, osteoclasts, osteoblasts and fibroblasts. The majority of research in peri-prosthetic osteolysis has concentrated on the role played by osteoclasts and macrophages. The purpose of this review is to assess the role of the osteoblast in peri-prosthetic osteolysis. In peri-prosthetic osteolysis, wear particles may affect osteoblasts and contribute to the osteolytic process by two mechanisms. First, particles and metallic ions have been shown to inhibit the osteoblast in terms of its ability to secrete mineralised bone matrix, by reducing calcium deposition, alkaline phosphatase activity and its ability to proliferate. Secondly, particles and metallic ions have been shown to stimulate osteoblasts to produce pro inflammatory mediators in vitro. In vivo, these mediators have the potential to attract pro-inflammatory cells to the peri-prosthetic area and stimulate osteoclasts to absorb bone. Further research is needed to fully define the role of the osteoblast in peri-prosthetic osteolysis and to explore its potential role as a therapeutic target in this condition.
Subject(s)
Arthroplasty, Replacement, Hip/adverse effects , Hip Prosthesis/adverse effects , Osteoblasts/physiology , Osteolysis/pathology , Cytokines/metabolism , Humans , Inflammation Mediators/metabolism , Osteoblasts/metabolism , Osteolysis/etiology , Prosthesis FailureABSTRACT
Cobalt-doped magnetite (CoxFe3 -xO4) nanoparticles have been produced through the microbial reduction of cobalt-iron oxyhydroxide by the bacterium Geobacter sulfurreducens. The materials produced, as measured by superconducting quantum interference device magnetometry, X-ray magnetic circular dichroism, Mössbauer spectroscopy, etc., show dramatic increases in coercivity with increasing cobalt content without a major decrease in overall saturation magnetization. Structural and magnetization analyses reveal a reduction in particle size to less than 4 nm at the highest Co content, combined with an increase in the effective anisotropy of the magnetic nanoparticles. The potential use of these biogenic nanoparticles in aqueous suspensions for magnetic hyperthermia applications is demonstrated. Further analysis of the distribution of cations within the ferrite spinel indicates that the cobalt is predominantly incorporated in octahedral coordination, achieved by the substitution of Fe(2+) site with Co(2+), with up to 17 per cent Co substituted into tetrahedral sites.
Subject(s)
Cobalt/chemistry , Magnetite Nanoparticles/chemistry , Geobacter/metabolism , Magnetics , Nanotechnology/methods , X-Ray DiffractionABSTRACT
AIM: The accuracy and inter-observer reliability (IOR) of acetate templating on hard copy X-rays in 33 primary total hip arthroplasties as measured by consultant and trainee surgeons was analyzed to find out how accurate are junior surgeons undertaking specialty training. METHODS: The study was questionnaire-based using a prospective cohort over a 4 weeks period. The Surgeon measurements of acetabular cup, femoral stem and femoral offset sizes were noted following acetate measurements and then compared with the final implant chosen during surgery. RESULTS: Prediction of sizing to within one size of the final match size was 75% accurate for cup and 91% accurate for femoral stem. Prediction of exact femoral offset sizes was 91% accurate. Templating showed strong IOR between senior consultant surgeon and junior trainee registrar within one size for cup (83%) and stem (100%) and for exact hip offset prediction (92%). CONCLUSION: We conclude that acetate templating on hard copy X-rays is beneficial to surgeons to gauge acetabular cup and femoral stem size to within one size range. This further helps in predicting nearly exact femoral offset size.
Subject(s)
Arthroplasty, Replacement, Hip , Hip Prosthesis , Prosthesis Fitting/methods , Adult , Aged , Aged, 80 and over , Arthroplasty, Replacement, Hip/education , Arthroplasty, Replacement, Hip/methods , Female , Hip Joint/diagnostic imaging , Humans , Male , Middle Aged , Observer Variation , Preoperative Care , Prospective Studies , Prosthesis Design , Radiography , Reproducibility of Results , Surgery, Computer-AssistedABSTRACT
BACKGROUND AND PURPOSE: The Locking Compression Plate (LCP) is part of a new plate generation requiring an adapted surgical technique and new thinking about commonly used concepts of internal fixation using plates. Knowledge of the fixation stability provided by these new plates is very limited and clarification is still necessary to determine how the mechanical stability and the risk of implant failure can best be controlled. METHODS: Upon validation, a finite element model of an LCP attached to a cylinder was developed to simulate and analyse the biomechanics of a transverse long bone fracture fixed with a locking plate. Of special interest were the factors influencing the mechanical conditions at the fracture site, the control of interfragmentary movement and implant failure. RESULTS: Several factors were shown to influence stability in compression. Increasing translation and/or fracture angle post fixation reduced construct stability. Axial stiffness was also influenced by the working length and plate-bone distance. The fracture gap had no effect on the construct stability when no bone contact occurred during loading. Stress analysis of the LCP demonstrated that the maximum Von Mises stresses were found in the innermost screws at the screw-head junction. INTERPRETATION: For the clinical use of the LCP as a locked internal fixator in fractures with an interfragmentary gap of 1 mm, at least two to four plate holes near the fracture gap should be omitted to allow fracture motion and bone contact to occur. This will also achieve a larger area of stress distribution on the plate and reduce the likelihood of fatigue failure due to cyclic loading.
ABSTRACT
INTRODUCTION: Recent reports show increased failure rates in hip resurfacings that display >10 % neck narrowing. The etiology of neck narrowing remains unknown. METHODS: We assessed 80 hip resurfacings at mean 3.5 years follow-up. RESULTS: The overall rate of significant narrowing was 11.25 %. Neck narrowing occurred in 4 % of patients using an anterolateral approach and 23.3 % using a posterior approach (P = 0.019). Logistic regression showed that both surgical approach and cup inclination angle were the most important risk factors for the development of narrowing. The odds of the presence of narrowing increased for every degree increase in cup abduction angle (P = 0.021). There was no significant association with age, sex, pre-operative diagnosis, pre- and post-operative SF-36 scores, neck shaft angle, femoral or acetabular component sizes. CONCLUSION: We postulate that neck narrowing is a result of damage to the medial circumflex femoral vessel when resurfacing through a posterior approach.
Subject(s)
Arthroplasty, Replacement, Hip/methods , Bone Resorption/etiology , Femur Neck/physiopathology , Hip Prosthesis/adverse effects , Adult , Aged , Aged, 80 and over , Female , Femur Neck/blood supply , Femur Neck/pathology , Humans , Logistic Models , Male , Middle Aged , Risk FactorsABSTRACT
BACKGROUND: We designed, implemented and assessed an interactive musculoskeletal teaching module for fourth-year medical students. Over a 2-week period, students followed a programme of alternating lectures, interactive tutorials, case discussions, clinical examination and 'how to do' sessions using patients and clinical models. METHODS: Over a 4-month period, 140 fourth-year medical students rotated for 2 weeks through a new interactive musculoskeletal teaching module in an elective orthopaedic hospital. To assess the impact of our module, a basic-competency examination in musculoskeletal medicine was developed and validated. Each student completed the examination on the first and last days of the module. We also assessed musculoskeletal basic knowledge in students from a different medical school, receiving a classic lecturing programme. RESULTS: In the pre-course assessment, only 20 % of students achieved an overall pass rate. The pass rate increased to 85 % in post-course examination. Students found particularly beneficial the interactive tutorial approach, with 48 % finding this to be the single most effective teaching method. When compared with students who completed a classic lecturing programme, students attending our interactive module scored higher in all aspects of musculoskeletal knowledge. SIGNIFICANCE: This study highlights the benefits and need for more interactive teaching of musculoskeletal medicine in medical schools.
Subject(s)
Clinical Competence , Education, Medical, Undergraduate/methods , Musculoskeletal Diseases , Orthopedics/education , Educational Measurement , Humans , Ireland , Musculoskeletal Diseases/diagnosis , Musculoskeletal Diseases/therapy , Musculoskeletal System , Prospective Studies , Schools, Medical , Students, Medical , Surveys and QuestionnairesABSTRACT
There are currently no guidelines for splenectomy patient undergoing total joint arthroplasty. We present a case history of a 63-year-old man with a history of splenectomy that underwent a total knee arthroplasty with standard intravenous antibiotic prophylaxis. Two weeks postoperatively, he developed a prosthetic joint infection and followed the standard antimicrobial management with intravenous and oral antibiotics prior to having revision surgery. We propose that there are guidelines to properly manage these patients in the pre- and perioperative setting following an orthopaedic procedure.