Liquids with High Compressibility.

Compressibility is a fundamental property of all materials. For fluids, that is, gases and liquids, compressibility forms the basis of technologies such as pneumatics and hydraulics and determines basic phenomena such as the propagation of sound and shock waves. In contrast to gases, liquids are almost incompressible. If the compressibility of liquids could be increased and controlled, new applications in hydraulics and shock absorption could result. Here, it is shown that dispersing hydrophobic porous particles into water gives aqueous suspensions with much greater compressibilities than any normal liquids such as water (specifically, up to 20 times greater over certain pressure ranges). The increased compressibility results from water molecules being forced into the hydrophobic pores of the particles under applied pressure. The degree of compression can be controlled by varying the amount of porous particles added. Also, the pressure range of compression can be reduced by adding methanol or increased by adding salt. In all cases, the liquids expand back to their original volume when the applied pressure is released. The approach shown here is simple and economical and could potentially be scaled up to give large amounts of highly compressible liquids.

Type 3 Porous Liquids for the Separation of Ethane and Ethene.

We assess the potential for formulating a porous liquid that could be used as a selective solvent for the separation of ethane and ethene. Ethane-ethene separation is performed on very large scales by cryogenic distillation, but this uses large amounts of energy. Solvents that are selective to ethane or ethene could potentially enable more efficient liquid-based separation processes to be developed, but to date such solvents have been elusive. Here, Type 3 porous liquids, which consist of microporous solids dispersed in size-excluded liquid phases, were tailored toward the separation of ethane and ethene. A high selectivity for ethene over ethane (25.6 at 0.8 bar) and a high capacity was achieved for zeolite AgA dispersed in an Ag-containing ionic liquid. Unusually for liquid phases, the selectivity for ethane over ethene (2.55 at 0.8 bar) could also be achieved using either the metal-organic framework (MOF) Cu(Qc)2 (Qc = quinoline-5-carboxylate) dispersed in sesame oil or ZIF-7 in sesame oil, the latter showing gated uptake. The efficiency of the Cu(Qc)2 synthesis was increased by developing a mechanochemical method. The regeneration of Cu(Qc)2 in sesame oil and ZIF-7 in sesame oil was also demonstrated, suggesting that these or similar porous liquids could potentially be applied in cyclic separation processes.

Type 3 porous liquids based on non-ionic liquid phases - a broad and tailorable platform of selective, fluid gas sorbents.

We describe a series of Type 3 porous liquids, denoted "T3PLs", based on a wide range of microporous solids including MOFs, zeolites and a porous organic polymer (PAF-1). These solids are dispersed in various non-ionic liquid phases (including silicone oils, triglyceride oils, and polyethylene glycols) which have a range of structures and properties, and that are in many cases sterically excluded from the pores of the solids. Several stable dispersions with high gas uptakes are obtained. We show how these dispersions can be tailored toward important gas separation processes (CO2/CH4, C2H4/C2H6) and applications that require biocompatibility.

Correlation of MARS MRI findings with cup position, metal ion levels and function in metal-on-metal total hip arthroplasty.

INTRODUCTION: Metal-on-metal (MoM) total hip arthroplasties (THAs) have been linked with increased incidence of pseudotumours and revision rate. magnetic resonance imaging (MRI) is useful in diagnosing adverse reaction to metal debris (ARMD) disease but it is not known if MRI findings correlate with cup position. PATIENTS AND METHODS: From a cohort of 79 MoM THA, 34 MRI studies were available. MRI was classified according to Anderson classification. Mean follow-up was 7.1 years. Evaluation included cup position including margin of safety, measurement of metal ion levels and evaluation of function. RESULTS: 44% of patients had definite ARMD. We did not find any correlation between MRI stage and Co, Cr, margin of safety (MOS) or functional scores. However, patients with a margin of safety angle < 21° had more severe findings in MRI. CONCLUSIONS: Patients with MoM THA experience high degree of ARMD. In our study, the disease did not correlate with metal ion levels but correlated with cup position, evaluated with the MOS angle.

Continuous multi-step synthesis by extrusion - telescoping solvent-free reactions for greater efficiency.

Chemical manufacturing typically requires more than one step, involving multiple batch processes, which makes synthesis at scale laborious and wasteful. Herein, we demonstrate that several reactions can be telescoped into a single continuous process and/or be carried out as a continuous multi-component reaction (MCR), by twin screw extrusion (TSE), in the complete absence of solvent.

Fluid signal changes around the knee on MRI are associated with increased volumes of subcutaneous fat: a case-control study.

BACKGROUND: Fluid in the subcutaneous fat is a common finding anterior to the knee on MRI. This may be caused by chronic low-grade shearing injuries in patients who are overweight. The purpose of this study was to determine if there is a difference in the amount of subcutaneous fat around the knee between patients with these appearances and controls. METHODS: This was a retrospective case-control study. Following a sample size calculation on pilot data, eighteen sequential patients demonstrating hyper-intense subcutaneous signal changes around the knee on fat-saturated T2-weighted MRI were identified from PACS (18 females, mean age 45, range 31-62). Age and gender-matched patients without abnormal T2 MR signal changes were selected. Two observers independently drew regions of interest representing cross-sectional areas of bone and fat. The location of T2 signal hyper-intense lesions was characterized by consensus. RESULTS: Inter and intra-rater intraclass reproducibility was "excellent" (ICC > 0.8). The mean cross-sectional area of bone for patients with T2 hyper-intense lesions was 31.79cm2 (SD 2.57) and for controls 30.11cm2 (SD 3.20) which was not significantly different (p = 0.09). The median cross-sectional area of fat for the study group was 62.29cm2 (IQR 57.1-66.5) and for controls was 32.77cm2 (IQR 24.8-32.3) which was significantly different (p < 0.0001). Consensus agreement demonstrated all T2 hyper-intense lesions were anterior to the knee extensor mechanism. CONCLUSION: Subcutaneous fluid around the knee is associated with an increased amount of subcutaneous fat, anterior to the knee extensor mechanism. This may be caused by shearing injuries in fat with reduced elasticity associated with metabolic syndrome.

Calcific tendinitis of biceps femoris: an unusual site and cause for lateral knee pain.

A 37-year-old man presented to the acute knee and sports medicine clinic with atraumatic lateral knee pain. He had point tenderness over the lateral aspect of his knee which had not settled with anti-inflammatory medications. Imaging revealed a large opaque lesion lateral to the knee and although there was no clear mechanism, injury to the posterolateral corner was considered. An MRI subsequently revealed a rare case of calcific tendinitis to the biceps femoris tendon insertion. This condition was self-limiting and did not require interventions such as steroid injections. This is the first reported case of calcific tendinitis of biceps femoris as a cause of acute knee pain.

Metal ion levels not sufficient as a screening measure for adverse reactions in metal-on-metal hip arthroplasties.

This study aims to assess the accuracy of metal ion analysis in the diagnosis of adverse reaction to metal debris (ARMD) in patients with metal-on-metal hip arthroplasties by comparing the cobalt and chromium levels in 57 patients (62 hips) to findings on metal artifact reduction magnetic resonance imaging (MRI). An ARMD was detected using MRI in 18 (29%) of the hips. Forty patients had cobalt levels less than 7 µg/L, and 33 had chromium levels less than 7 µg/L, but 8 of these had an ARMD on MRI and only minimal symptoms (Oxford Hip Score ≥ 44/48). The incidence of ARMD was significantly higher when chromium concentration was above 7 µg/L (P = .02), but normal metal ion levels can be misleading and metal artifact reduction MRI imaging is advised in all patients.

MRI of aseptic lymphocytic vasculitis-associated lesions in metal-on-metal hip replacements.

OBJECTIVE: The aim of this review is to describe the clinical, histopathologic, and MRI features of aseptic lymphocytic vasculitis-associated lesions in total hip replacements. CONCLUSION: The introduction of modern metal-on-metal hip arthroplasty has been accompanied by a newly described disease, aseptic lymphocytic vasculitis-associated lesions, which is characterized histologically by bland necrosis and dense perivascular lymphocytic infiltrates. Conventional radiographic findings are often normal, but the typical MRI findings include periprosthetic fluid collections, soft-tissue masses, gluteal tendon avulsion, bone loss, periosteal stripping, neurovascular involvement, and periprosthetic fractures. The severity of the histologic and MRI appearances can be graded according to defined published criteria.

Lumbar lordosis and pars interarticularis fractures: a case-control study.

OBJECTIVE: The aim of this study is to examine the relationship between lumbar lordosis and pars interarticularis fractures. MATERIALS AND METHODS: In this retrospective case-control study we compare the angle of lumbar lordosis and the angle of the S1 vertebral endplate (as a measure of pelvic tilt) in patients with bilateral L5 pars interarticularis fractures with age- and sex-matched control cases with normal MRI examinations of the lumbar spine. Twenty-nine cases of bilateral L5 pars interarticularis fractures with matched control-cases were identified on MRI (16 male, 13 female, age 9-63 years). The angle of lordosis was measured between the inferior L4 and superior S1 vertebral endplates on a standing lateral lumbar spine radiograph for both groups. RESULTS: The mean angle of lordosis about the L5 vertebra was 36.9° (SD = 6.5°) in the pars interarticularis fracture group, and 30.1° (SD = 6.4°) in the control group. The difference between the two groups was significant (mean difference 6.8°, Student's t test: P < 0.001). The mean angle of sacral tilt measured was 122.2° (SD = 10.16°) for controls and 136.4° (SD = 10.86°) for patients with pars defects. The difference in the means of 14.2° was statistically significantly different (P < 0.0001). CONCLUSION: Sacral tilt represented by a steeply angled superior endplate of S1 is associated with a significantly increased angle of lordosis, between L4 and S1, and pars fractures at L5. Steep angulation of the first sacral vertebral segment maybe the predisposing biomechanical factor that leads to pincer-like impingement of the pars interarticularis and then spondylolysis.

Silent soft tissue pathology is common with a modern metal-on-metal hip arthroplasty.

BACKGROUND AND PURPOSE: Adverse reactions to metal debris have been reported to be a cause of pain in metal-on-metal hip arthroplasty. We assessed the incidence of both symptomatic and asymptomatic adverse reactions in a consecutive series of patients with a modern large-head metal-on-metal hip arthroplasty. METHODS: We studied the early clinical results and results of routine metal artifact-reduction MRI screening in a series of 79 large-head metal-on-metal hip arthroplasties (ASR; DePuy, Leeds, UK) in 68 patients. 75 hips were MRI scanned at mean 31 (12-52) months after surgery. RESULTS: 27 of 75 hips had MRI-detected metal debris-related abnormalities, of which 5 were mild, 18 moderate, and 4 severe. 8 of these hips have been revised, 6 of which were revised for an adverse reaction to metal debris, diagnosed preoperatively with MRI and confirmed histologically. The mean Oxford hip score (OHS) for the whole cohort was 21. It was mean 23 for patients with no MRI-based evidence of adverse reactions and 19 for those with adverse reactions detected by MRI. 6 of 12 patients with a best possible OHS of 12 had MRI-based evidence of an adverse reaction. INTERPRETATION: We have found a high early revision rate with a modern, large-head metal-on-metal hip arthroplasty. MRI-detected adverse rections to metal debris was common and often clinically "silent". We recommend that patients with this implant should be closely followed up and undergo routine metal artifact-reduction MRI screening.

Midcarpal instability: a radiological perspective.

Midcarpal instability (MCI) is the result of complex abnormal carpal motion at the midcarpal joint of the wrist. It is a form of non-dissociative carpal instability (CIND) and can be caused by various combinations of extrinsic ligament injuries that then result in one of several subtypes of MCI. The complex patterns of injury and the kinematics are further complicated by competing theories, terminology and classifications of MCI. Palmar, dorsal, ulna midcarpal instability, and capitolunate or chronic capitolunate instability are all descriptions of types of MCI with often overlapping features. Palmar midcarpal instability (PMCI) is the most commonly reported type of MCI. It has been described as resulting from deficiencies in the ulna limb of the palmar arcuate ligament (triquetrohamate-capitate) or the dorsal radiotriquetral ligaments, or both. Unstable carpal articulations can be treated with limited carpal arthrodesis or the ligamentous defects can be treated with capsulorrhaphy or ligament reconstruction. Conventional radiographic abnormalities are usually limited to volar intercalated segment instability (VISI) patterns of carpal alignment and are not specific. For many years stress view radiographs and videofluoroscopy have been the methods of choice for demonstrating carpal instability and abnormal carpal kinematics respectively. Dynamic US can be also used to demonstrate midcarpal dyskinesia including the characteristic triquetral "catch-up" clunk. Tears of the extrinsic ligaments can be demonstrated with MR arthrography, and probably with CT arthrography, but intact yet redundant ligaments are more difficult to identify. The exact role of these investigations in the diagnosis, categorisation and management of midcarpal instability has yet to be determined.

Grading the severity of soft tissue changes associated with metal-on-metal hip replacements: reliability of an MR grading system.

INTRODUCTION: Metal-on-metal (MoM) soft tissue reactions or aseptic lymphocytic vasculitis-associated lesions (ALVAL) are being recognised using metal artefact reduction (MAR) MR with increasing frequency following the advent of second generation metal-on-metal bearings, but there is no standardised technique for reporting of MR appearances in this disease. The aim of this study was to measure the reliability of a grading system designed for scoring the severity of MoM disease on MRI. MATERIALS AND METHODS: MRI examinations of 73 hips in 59 patients were retrospectively selected and then anonymised, randomised and reviewed by three independent observers (musculoskeletal radiologists). Each MR examination was scored as either A: normal, B: infection, C1: mild MoM disease, C2: moderate MoM disease or C3: severe MoM disease according to pre-defined criteria. Kappa correlation statistics were used to compare the observations. RESULTS: There was substantial agreement among all three observers; the correlation coefficient between the two most experienced observers was κ = 0.78 [95% confidence intervals (CI): 0.68-0.88] and when compared with the least experienced observer coefficients were κ = 0.69 (95% CI: 0.57-0.80) and κ = 0.66 (95% CI: 0.54-0.78). The strongest correlation occurred for grades A, C2 and C3. The weakest correlations occurred for grades B and C1. CONCLUSION: The grading system described in this study is reliable for evaluating ALVAL in MoM prostheses using MR but is limited in differentiating mild disease from infection.

Imaging the femoral sulcus with ultrasound, CT, and MRI: reliability and generalizability in patients with patellar instability.

OBJECTIVE: Recent advances in surgical intervention for patellar instability have led to a need for long-term radiological monitoring. The aim of this study is to determine whether or not magnetic resonance imaging (MRI) or ultrasound (US) can replace computed tomography (CT) as the standard of care for the evaluation of the femoral sulcus. MATERIALS AND METHODS: This was a prospective study comparing the reliability of CT, magnetic resonance (MR), and US for measuring the femoral sulcus in patients with patellar instability. Twenty-four patients were recruited to undergo a CT, MR, and US examination of each knee. Two observers independently measured femoral sulcus angles from subchondral bone and hyaline cartilage on two occasions. Intraclass correlations and generalizability coefficients were calculated to measure the reliability of each of the techniques. Thereafter, two observers measured the femoral sulcus angle from ultrasound images recorded by two independent operators to estimate interobserver and interoperator reliability. RESULTS: Forty-seven knees were examined with CT and US and 44 with MRI. The sulcus angle was consistently smaller when measured from subchondral bone compared to cartilage (5-7 degrees ). Interobserver reliability for CT, MR, and US measurements from subchondral bone were 0.87, 0.80, and 0.82 and from cartilage 0.80, 0.81, and 0.50. Generalizability coefficients of measurements from subchondral bone for CT, MR, and US were 0.87, 0.76, and 0.81 and for cartilage 0.76, 0.73, and 0.05. Most of the variability in the US occurred at image acquisition rather than measurement. CONCLUSION: In patients with patellar instability, CT and MR are reliable techniques for measuring the femoral sulcus angle but US, particularly of the articular cartilage, is not. MR is therefore the most suitable tool for longitudinal studies of the femoral sulcus.

Regional migratory osteoporosis.

Regional migratory osteoporosis (RMO) is an uncommon disease characterised by a migrating arthralgia involving the weight bearing joints of the lower limb. The typical imaging findings on radiographs, magnetic resonance imaging, computed tomography and bone scintigraphy are described and illustrated. Men in their fifth and sixth decades of life are most commonly affected. The most common presentation is with proximal to distal spread in the lower limb. The world literature has been reviewed which has revealed 63 documented cases of regional osteoporosis or bone marrow oedema with migratory symptoms. Most of these cases have not been labelled as RMO and therefore the condition is probably under-diagnosed. The radiology of RMO is indistinguishable from transient osteoporosis of the hip (TOH) except for the migratory symptoms and the two conditions are likely to be part of the same spectrum of disease. Systemic osteoporosis is a more recently recognised accompanying feature that hints at an underlying aetiology and an approach to the management of this condition.

Calcific tendonitis of pectoralis major: CT and MRI findings.

OBJECTIVE: The shoulder is the most common location for calcific tendonitis. Presentation of calcific tendonitis at other sites is unusual and may lead to diagnostic difficulty. DESIGN AND PATIENTS: We report a case of calcific tendonitis of the pectoralis major insertion and describe the CT and MRI findings. RESULTS AND CONCLUSION: The presence of an associated cortical defect at the site of tendon insertion may lead to the incorrect diagnosis of neoplastic process.