ABSTRACT
In this paper, we present to achieve a broadband miniaturized transmission waveguide based on complementary spoof surface plasmon polaritons (CSSPPs). For this purpose, a novel SSPP design that consists of a corrugated slot line and a group of additional interdigital structures (ISs) is proposed, which brings in an extra solution to control the cut-off property of CSSPPs. The transmission cut-off frequency of the proposed design decreases with the increasing of the number of the ISs. Since the width of CSSPP waveguide is directly related to the operating frequency, the degree of miniaturization can be modulated freely by carefully choosing the number of the ISs. A prototype of device with four-ISs introduced is designed and fabricated. And the cut-off frequency of the design decreases from 10 GHz to 5.3 GHz, when the ISs are added. Experimental results agree well with the numerical simulations. The proposed design illustrates great potentials in modern plasmonic integrated circuits.
ABSTRACT
The plasmonic waveguide made of uniform corrugated metallic strip can support and guide spoof surface plasmon polaritons (SSPPs) with high confinements. Here, we propose periodically-modulated plasmonic waveguide composed of non-uniform corrugated metallic strip to convert SSPPs to radiating waves, in which the main beam of radiations can steer continuously as the frequency changes. To increase the radiation efficiency of the periodically-modulated plasmonic waveguide at the broadside, an asymmetrical plasmonic waveguide is further presented to reduce the reflections and realize continuous leaky-wave scanning. Both numerical simulations and experimental results show that the radiation efficiency can be improved greatly and the main beam of leaky-wave radiations can steer from the backward quadrant to the forward quadrant, passing through the broadside direction, which generally is difficult to be realized by the common leaky-wave antennas.
ABSTRACT
One-dimensional (1D) subwavelength corrugated metal structures has been described to support spoof surface plasmon polaritons (SPPs). Here we demonstrate that a periodically modulated 1D subwavelength corrugated metal structure can convert spoof SPPs to propagating waves. The structure is fed at the center through a slit with a connected waveguide on the input side. The subwavelength corrugated metal structure on the output surface is regarded as metasurface and modulated periodically to realize the leaky-wave radiation at the broadside. The surface impedance of the corrugated metal structure is modulated by using cosine function and triangle-wave function, respectively, to reach the radiation effect. Full wave simulations and measuremental results are presented to validate the proposed design.
ABSTRACT
Metasurfaces have huge potentials to develop new type imaging systems due to their abilities of controlling electromagnetic waves. Here, we propose a new method for dual-sensor imaging based on cross-like holographic leaky-wave metasurfaces which are composed of hybrid isotropic and anisotropic surface impedance textures. The holographic leaky-wave radiations are generated by special impedance modulations of surface waves excited by the sensor ports. For one independent sensor, the main leaky-wave radiation beam can be scanned by frequency in one-dimensional space, while the frequency scanning in the orthogonal spatial dimension is accomplished by the other sensor. Thus, for a probed object, the imaging plane can be illuminated adequately to obtain the two-dimensional backward scattered fields by the dual-sensor for reconstructing the object. The relativity of beams under different frequencies is very low due to the frequency-scanning beam performance rather than the random beam radiations operated by frequency, and the multi-illuminations with low relativity are very appropriate for multi-mode imaging method with high resolution and anti- noise. Good reconstruction results are given to validate the proposed imaging method.
ABSTRACT
We propose a method for dual-channel near-field manipulations by designing isotropic but inhomogeneous metasurfaces. As example, we present a dual-channel near-field focusing metasurface device. When the device is driven by surface waves from different channels on the metasurface, the near fields will be focused at the same spatial point with different polarizations. Conversely, if a linearly polarized source is radiated at the spatial focal point, different channels will be evoked on the metasurface controlled by polarization. We fabricated and measured the metasurface device in the microwave frequency. Well agreements between the simulation and measurement results are observed. The proposed method exhibits great flexibility in controlling the surface waves and spatial waves simultaneously. It is expected that the proposed method and dual-channel device will facilitate the manipulation of near electromagnetic or optical waves in different frequency regimes.
ABSTRACT
We propose to use backward radiations of leaky waves supported by a holographic metasurface to produce spatial Bessel beams in the microwave frequency regime. The holographic metasurface consists of a grounded dielectric slab and a series of metal patches. By changing the size of metal patches, the surface-impedance distribution of the holographic metasurface can be modulated, and hence the radiation properties of the leaky waves can be designed to realize Bessel beams. Both numerical simulations and experiments verify the features of spatial Bessel beams, which may be useful in imaging applications or wireless power transmissions with the dynamic focal-depth controls.
ABSTRACT
We propose a method to control electromagnetic (EM) radiations by holographic metasurfaces, including to producing multi-beam scanning in one dimension (1D) and two dimensions (2D) with the change of frequency. The metasurfaces are composed of subwavelength metallic patches on grounded dielectric substrate. We present a combined theory of holography and leaky wave to realize the multi-beam radiations by exciting the surface interference patterns, which are generated by interference between the excitation source and required radiation waves. As the frequency changes, we show that the main lobes of EM radiation beams could accomplish 1D or 2D scans regularly by using the proposed holographic metasurfaces shaped with different interference patterns. This is the first time to realize 2D scans of antennas by changing the frequency. Full-wave simulations and experimental results validate the proposed theory and confirm the corresponding physical phenomena.
ABSTRACT
We propose a method to design and realize planar Bessel lens using artificial metasurfaces to produce diffraction-free surface waves. The planar Bessel lens is composed of two sublenses: a half Maxwell fisheye lens which can shape the surface cylindrical waves to surface plane waves, and an inhomogeneous flat lens which can convert the surface plane waves into approximate diffraction-free surface waves in a diamond-shaped focusing area. Through the planar Bessel lens, a point source on the metasurface directly radiates the diffraction-free surface waves. In realization, we construct the inhomogeneous metasurfaces by subwavelength metallic patches printed on a grounded dielectric substrate. Simulation and experimental results have good agreements, which jointly show the formation of the diffraction-free surface waves in the microwave band.
