Primary Cilia Exhibit Mechanosensitivity to Cyclic Tensile Strain and Lineage-Dependent Expression in Adipose-Derived Stem Cells.

Non-motile primary cilia are dynamic cellular sensory structures and are expressed in adipose-derived stem cells (ASCs). We have previously shown that primary cilia are involved in chemically-induced osteogenic differentiation of human ASC (hASCs) in vitro. Further, we have reported that 10% cyclic tensile strain (1 Hz, 4 hours/day) enhances hASC osteogenesis. We hypothesize that primary cilia respond to cyclic tensile strain in a lineage dependent manner and that their mechanosensitivity may regulate the dynamics of signaling pathways localized to the cilium. We found that hASC morphology, cilia length and cilia conformation varied in response to culture in complete growth, osteogenic differentiation, or adipogenic differentiation medium, with the longest cilia expressed in adipogenically differentiating cells. Further, we show that cyclic tensile strain both enhances osteogenic differentiation of hASCs while it suppresses adipogenic differentiation as evidenced by upregulation of RUNX2 gene expression and downregulation of PPARG and IGF-1, respectively. This study demonstrates that hASC primary cilia exhibit mechanosensitivity to cyclic tensile strain and lineage-dependent expression, which may in part regulate signaling pathways localized to the primary cilium during the differentiation process. We highlight the importance of the primary cilium structure in mechanosensing and lineage specification and surmise that this structure may be a novel target in manipulating hASC for in tissue engineering applications.

Industrial-scale fabrication of an osteogenic and antibacterial PLA/silver-loaded calcium phosphate composite with significantly reduced cytotoxicity.

In this study, we report an industrial-scale fabrication method of a multifunctional polymer composite as a scaffold material for bone tissue engineering. This study successfully demonstrated the potential of applying industrial polymer processing technologies to produce specially functionalized tissue engineering scaffolds. With the inclusion of a newly synthesized multifunctional additive, silver-doped-calcium phosphate (silver-CaP), the composite material exhibited excellent osteogenic inducibility of human adipose-derived stem cells (hASC) and satisfactory antibacterial efficacy against Escherichia coli and Staphylococcus aureus. Also, relative to previously reported methods of direct loading silver particles into polymeric materials, our composite exhibited significantly reduced silver associated cytotoxicity. The enhanced biocompatibility could be a significant advantage for materials to be used for regenerative medicine applications where clinical safety is a major consideration. The impact of different silver loading methodologies on hASC' osteogenic differentiation was also studied. Overall, the results of this study indicate a promising alternative approach to produce multifunctional scaffolds at industrial-scale with higher throughput, lower cost, and enhanced reproducibility. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 900-910, 2019.

Hierarchical NiCo2O4 nanosheets grown on hollow carbon microspheres composites for advanced lithium-ion half and full batteries.

Hierarchical ultrathin NiCo2O4 nanosheeets grown on uniform hollow carbon microspheres (HC@NiCo2O4) are designed and fabricated by a solvothermal reaction followed with an annealing process. When evaluated as an anode for lithium ion batteries, the as-prepared HC@NiCo2O4 microspheres exhibit excellent electrochemical performance (a high reversible capacity of 1015 mA h g-1 after 100 cycles at a current density of 0.1 A g-1 and a high capacity of 805 mA h g-1 even at a high current density of 0.5 A g-1). By pairing with the LiCoO2 cathode, the HC@NiCo2O4 anode also manifests excellent performance in full cells. The outstanding electrochemical performance in half and full cells can be attributed to its unique structure, which can not only promote the contact of electrode and electrolyte during the charge and discharge processes, but also shorten the transmission path of electrons and ions. More importantly, this study inspires a better design of various metal oxide/carbon electrode materials for high performance lithium ion batteries.

High-Throughput Fabrication Method for Producing a Silver-Nanoparticles-Doped Nanoclay Polymer Composite with Novel Synergistic Antibacterial Effects at the Material Interface.

In this study, we report a high-throughput fabrication method at industrial pilot scale to produce a silver-nanoparticles-doped nanoclay-polylactic acid composite with a novel synergistic antibacterial effect. The obtained nanocomposite has a significantly lower affinity for bacterial adhesion, allowing the loading amount of silver nanoparticles to be tremendously reduced while maintaining satisfactory antibacterial efficacy at the material interface. This is a great advantage for many antibacterial applications in which cost is a consideration. Furthermore, unlike previously reported methods that require additional chemical reduction processes to produce the silver-nanoparticles-doped nanoclay, an in situ preparation method was developed in which silver nanoparticles were created simultaneously during the composite fabrication process by thermal reduction. This is the first report to show that altered material surface submicron structures created with the loading of nanoclay enables the creation of a nanocomposite with significantly lower affinity for bacterial adhesion. This study provides a promising scalable approach to produce antibacterial polymeric products with minimal changes to industry standard equipment, fabrication processes, or raw material input cost.

Fabrication and Evaluation of Electrospun, 3D-Bioplotted, and Combination of Electrospun/3D-Bioplotted Scaffolds for Tissue Engineering Applications.

Electrospun scaffolds provide a dense framework of nanofibers with pore sizes and fiber diameters that closely resemble the architecture of native extracellular matrix. However, it generates limited three-dimensional structures of relevant physiological thicknesses. 3D printing allows digitally controlled fabrication of three-dimensional single/multimaterial constructs with precisely ordered fiber and pore architecture in a single build. However, this approach generally lacks the ability to achieve submicron resolution features to mimic native tissue. The goal of this study was to fabricate and evaluate 3D printed, electrospun, and combination of 3D printed/electrospun scaffolds to mimic the native architecture of heterogeneous tissue. We assessed their ability to support viability and proliferation of human adipose derived stem cells (hASC). Cells had increased proliferation and high viability over 21 days on all scaffolds. We further tested implantation of stacked-electrospun scaffold versus combined electrospun/3D scaffold on a cadaveric pig knee model and found that stacked-electrospun scaffold easily delaminated during implantation while the combined scaffold was easier to implant. Our approach combining these two commonly used scaffold fabrication technologies allows for the creation of a scaffold with more close resemblance to heterogeneous tissue architecture, holding great potential for tissue engineering and regenerative medicine applications of osteochondral tissue and other heterogeneous tissues.

Primary cilia are sensors of electrical field stimulation to induce osteogenesis of human adipose-derived stem cells.

In this study, we report for the first time that the primary cilium acts as a crucial sensor for electrical field stimulation (EFS)-enhanced osteogenic response in osteoprogenitor cells. In addition, primary cilia seem to functionally modulate effects of EFS-induced cellular calcium oscillations. Primary cilia are organelles that have recently been implicated to play a crucial sensor role for many mechanical and chemical stimuli on stem cells. Here, we investigate the role of primary cilia in EFS-enhanced osteogenic response of human adipose-derived stem cells (hASCs) by knocking down 2 primary cilia structural proteins, polycystin-1 and intraflagellar protein-88. Our results indicate that structurally integrated primary cilia are required for detection of electrical field signals in hASCs. Furthermore, by measuring changes of cytoplasmic calcium concentration in hASCs during EFS, our findings also suggest that primary cilia may potentially function as a crucial calcium-signaling nexus in hASCs during EFS.-Cai, S., Bodle, J. C., Mathieu, P. S., Amos, A., Hamouda, M., Bernacki, S., McCarty, G., Loboa, E. G. Primary cilia are sensors of electrical field stimulation to induce osteogenesis of human adipose-derived stem cells.

Water-stable three-dimensional ultrafine fibrous scaffolds from keratin for cartilage tissue engineering.

Intrinsically water-stable scaffolds composed of ultrafine keratin fibers oriented randomly and evenly in three dimensions were electrospun for cartilage tissue engineering. Keratin has been recognized as a biomaterial that could substantially support the growth and development of multiple cell lines. Besides, three-dimensional (3D) ultrafine fibrous structures were preferred in tissue engineering due to their structural similarity to native extracellular matrices in soft tissues. Recently, we have developed a nontraditional approach to developing 3D fibrous scaffolds from alcohol-soluble corn protein, zein, and verified their structural advantages in tissue engineering. However, keratin with highly cross-linked molecular structures could not be readily dissolved in common solvents for fiber spinning, which required the remarkable drawability of solution. So far, 3D fibrous scaffolds from pure keratin for biomedical applications have not been reported. In this research, the highly cross-linked keratin from chicken feathers was de-cross-linked and disentangled into linear and aligned molecules with preserved molecular weights, forming highly stretchable spinning dope. The solution was readily electrospun into scaffolds with ultrafine keratin fibers oriented randomly in three dimensions. Due to the highly cross-linked molecular structures, keratin scaffolds showed intrinsic water stability. Adipose-derived mesenchymal stem cells could penetrate much deeper, proliferate, and chondrogenically differentiate remarkably better on the 3D keratin scaffolds than on 2D PLA fibrous scaffolds, 3D soy protein fibrous scaffolds, or 3D commercial nonfibrous scaffolds. In summary, the electrospun 3D ultrafine fibrous scaffolds from keratin could be promising candidates for cartilage tissue engineering.

Electrospun ultrafine fibrous wheat glutenin scaffolds with three-dimensionally random organization and water stability for soft tissue engineering.

Wheat glutenin, the highly crosslinked protein from wheat, was electrospun into scaffolds with ultrafine fibers oriented randomly and evenly in three dimensions to simulate native extracellular matrices of soft tissues. The scaffolds were intrinsically water-stable without using any external crosslinkers and could support proliferation and differentiation of adipose-derived mesenchymal stem cells for soft tissue engineering. Regeneration of soft tissue favored water-stable fibrous protein scaffolds with three-dimensional arrangement and large volumes, which could be difficult to obtain via electrospinning. Wheat glutenin is an intrinsically water-stable protein due to the 2% cysteine in its amino acid composition. In this research, the disulfide crosslinks in wheat glutenin were cleaved while the backbones were preserved. The treated wheat glutenin was dissolved in aqueous solvent with an anionic surfactant and then electrospun into bulky scaffolds composed of ultrafine fibers oriented randomly in three dimensions. The scaffolds could maintain their fibrous structures after incubated in PBS for up to 35 days. In vitro study indicated that the three-dimensional wheat glutenin scaffolds well supported uniform distribution and adipogenic differentiation of adipose derived mesenchymal stem cells.

Ultrafine fibrous gelatin scaffolds with deep cell infiltration mimicking 3D ECMs for soft tissue repair.

In this research, ultrafine fibrous scaffolds with deep cell infiltration and sufficient water stability have been developed from gelatin, aiming to mimic the extracellular matrices (ECMs) as three dimensional (3D) stromas for soft tissue repair. The ultrafine fibrous scaffolds produced from the current technologies of electrospinning and phase separation are either lack of 3D oriented fibrous structure or too compact to be penetrated by cells. Whilst electrospun scaffolds are able to emulate two dimensional (2D) ECMs, they cannot mimic the 3D ECM stroma. In this work, ultralow concentration phase separation (ULCPS) has been developed to fabricate gelatin scaffolds with 3D randomly oriented ultrafine fibers and loose structures. Besides, a non-toxic citric acid crosslinking system has been established for the ULCPS method. This system could endow the scaffolds with sufficient water stability, while maintain the fibrous structures of scaffolds. Comparing with electrospun scaffolds, the ULCPS scaffolds showed improved cytocompatibility and more importantly, cell infiltration. This research has proved the possibility of using gelatin ULCPS scaffolds as the substitutes of 3D ECMs.

Novel 3D electrospun scaffolds with fibers oriented randomly and evenly in three dimensions to closely mimic the unique architectures of extracellular matrices in soft tissues: fabrication and mechanism study.

In this work, novel electrospun scaffolds with fibers oriented randomly and evenly in three dimensions (3D) including in the thickness direction were developed based on the principle of electrostatic repulsion. This unique structure is different from most electrospun scaffolds with fibers oriented mainly in one direction. The structure of novel 3D scaffolds could more closely mimic the 3D randomly oriented fibrous architectures in many native extracellular matrices (ECMs). The cell culture results of this study indicated that, instead of becoming flattened cells when cultured in conventional electrospun scaffolds, the cells cultured on novel 3D scaffolds could develop into stereoscopic topographies, which highly simulated in vivo 3D cellular morphologies and are believed to be of vital importance for cells to function and differentiate appropriately. Also, due to the randomly oriented fibrous structure, improvement of nearly 5 times in cell proliferation could be observed when comparing our 3D scaffolds with 2D counterparts after 7 days of cell culture, while most currently reported 3D scaffolds only showed 1.5- to 2.5-fold improvement for the similar comparison. One mechanism of this fabrication process has also been proposed and showed that the rapid delivery of electrons on the fibers was the crucial factor for formation of 3D architectures.

Identification of a keratinase-producing bacterial strain and enzymatic study for its improvement on shrink resistance and tensile strength of wool- and polyester-blended fabric.

A wool-degrading bacterium was isolated from decomposition wool fabrics in China. The strain, named 3096-4, showed excellent capability of removing cuticle layer of wool fibers, as demonstrated by removing cuticle layer completely within 48 h. According to the phenotypic characteristics and 16S rRNA profile, the isolate was classified as Pseudomonas. Bacteria growth and keratinase activity of the isolate were determined during cultivation on raw wool at different temperatures, initial pH, and rotation speed using orthogonal matrix method. Maximum growth and keratinase activity of the bacterium were observed under the condition including 30 °C, initial pH 7.6, and rotational speeds 160 rpm. The keratinase-containing crude enzyme prepared from 3096-4 was evaluated in the treatment of wool fabrics. The optimal condition of our enzymatic improvement of shrink resistance was the combination of 30 °C, initial pH 7.6, and rotation speeds 160 rpm. After the optimized treatment, the wool fabrics felting shrink was 4.1% at 6 h, and textile strength was not lost.