Ballast water management system: Assessment of chemical quality status of several ports in Adriatic Sea.

Oxidant treatment of ballast water (BW) is commonly used in BW systems in order to minimize the transport of alien species. The release of disinfection by-products (DBPs) associated to the treatment of BW and cross-contamination of butyltin (BT) compounds through BW discharge is a topic of environmental concern. A chemical port baseline survey has been conducted in seven ports of the Adriatic Sea. Analysis have been performed on transplanted mussels, surface sediment, seawater, BW. Results showed an evidence of BT contamination, particularly in sediments, probably related to their illegal usage or to intensive shipping activities. Therefore, BW may act as a vector and contribute to re-buildup of BT contamination in the coastal regions. A baseline set of data concerning DBPs is provided, showing the preferential distribution of these compounds in the marine environment that will be useful for future considerations on monitoring and assessment of chemical contamination associated with BW.

Complexation of cadmium and copper by fluvial humic matter and effects on their toxicity.

The effects of humic acids and fulvic acids isolated from the River Arno (Italy) on the bioavailability and toxicity of cadmium and copper were assessed in relation to changes in their speciation. Measurements of the complexing capacity of solutions containing these organic ligands were carried out by a titration procedure followed by DPASV and toxicity tests were carried out using lysosomes isolated from rat liver. The complexing capacity of the physiological medium containing about 13 mg/L of humic acids, expressed as ligand concentrations, was 0.30 and 0.072 micromol/L for cadmium and copper respectively; the corresponding conditional stability constants were 4.2 x 10(11) and 1.3 x 10(8) (mol/L)-1. The complexing capacities of the solution containing the same amount of fulvic acids were 0.33 and 0.164 micromol/L for cadmium and copper respectively, the conditional stability constants were 3.2 x 10(11) and 2.4 x 10(7) (mol/L)-1. The humic acids reduced the toxicity of cadmium by about 5 times: the EC50 changed from 4.4 to 20.4 micromol/L. The dose effect curve of copper presented a bi-sigmoid trend and two EC50 values can be determined: The EC50(1) in the presence of humic acids changed from 2.0 to 3.1 micromol/L, while the EC50(2) increased from 22.3 to 45.3 micromol/L. The fulvic acids reduced the cadmium toxicity by about the same amount as humic acids, from 4.4 to 18.6 micromol/L, but they had no effect on copper toxicity. Analysing the chemical speciation of cadmium and copper in the presence of humic components and under toxicity test conditions we can say that the appreciable decrease of EC50 is not related to changes in their speciation; we can hypothesize that this is due to different processes, as well as to blocking of the lysosomal membrane. On the basis of the shape of the dose-effect curves obtained for cadmium and copper respectively, we can say that the toxic effects of the two metals are different and we can hypothesize that copper could exercise its toxic activity by inhibiting the ATP-driven proton pump and the function of the Cl- selective channel.

Fulvic acid in microlayer waters of the Gerlache Inlet Sea (Antarctica): their distribution in dissolved and particulate phases.

In this work we studied the distribution of humic compounds between microlayer and subsurface waters. Both dissolved (DFA) and particulate (PFA) matter were considered. Humic acids were not found. The amount of total particulate matter is the same both in microlayer and subsurface waters. Conversely, particulate organic matter and fulvic acid concentrations were greater in microlayer waters. Enrichment factors (microlayer PFA/subsurface PFA and microlayer DFA/subsurface DFA) show a greater presence of fulvic acids in the microlayer. Moreover, the enrichment process is greater for the particulate phase. C/N values both in microlayer and subsurface waters are greater for DFA with respect to PFA and C/N values for DFA of microlayer are greater than that of subsurface waters. So DFA could be older than PFA, and DFA of subsurface waters younger than that of microlayer waters. For PFA S/C ratios in microlayer waters are greater than that of subsurface waters, underlining that the enrichment process is selective as regards sulphur-containing structures.

Reduction of Pb and Zn bioavailable forms in metal polluted soils due to paper mill sludge addition. Effects on Pb and Zn transferability to barley.

In the last few years solidification/stabilisation of acidic soils polluted by heavy metals with low-cost sorbents has been investigated. Paper mill sludges are produced in large amounts and their disposal is a serious environmental problem. The possibility was therefore studied of using paper mill sludge as a stabilizer to reduce the bioavailable metal forms in polluted soils and thus the transferability of metals to plants (barley). We first investigated the sorbing properties of paper mill sludge for Zn(II) and Pb(II) and then their fractionation both in a polluted soil and in the same soil amended with paper mill sludge in order to check the decrease in mobile forms. Finally in both soils we tested the uptake of two metals by common barley in order to assess the performance of soil remediation from an ecological point of view. The addition of paper mill sludge to a soil contaminated by lead and zinc induces a decrease in the mobile forms of both metals, probably due to the presence in sludge of organic matter and kaolinite, which are able to bind the metals very strongly. The decrease in the mobile forms, which are the most readily available for uptake by plants, corresponds to a decrease in plant uptake.

A new analytical approach for humin determination in sediments and soils.

In this work a new analytical approach is proposed for the recovery of humin present in soil and sediments. The procedure is based on microwave oven treatment for humin deashing. In this way both the treatment time and the concentration of the HCl/HF mixture are significantly reduced (minutes rather than hours, 10% rather than concentrated). By means of the proposed scheme organic matter present in sediment and soil samples can be subdivided into the different fractions (hydrophobic and hydrophilic compounds, fulvic and humic acids, humin) making up the balance of organic carbon. Results obtained for samples characterised by different organic carbon content showed a loss of carbon ranging between 20% and 30%, consistent with previous reports about humin deashing.

Dissolved and particulate humic substances in water channels in the historic centre of Venice.

The presence of humic substances, both in solution and as particulate, was studied in channels of the historic centre of Venice. The amount of particulate, its composition (organic and inorganic fraction) and the ratio between organic matter and humic substances were also considered. The sampling campaign was planned in 2001-02 from November to May. Three samplings in 20 stations representative of a large typical urban area were performed. The results obtained show that the composition of the particulate is variable, whereas the concentration of both dissolved and particulate humic substances is relatively homogeneous. Fulvic acids present in particulate are less homogeneous than dissolved forms; furthermore, the humification rate of organic matter is variable. Humic acids are absent, both in particulate and in dissolved forms.

Sedimentary humic substances in the northern Adriatic sea (Mediterranean sea).

Humic compounds were determined in sediments collected in an area of the Adriatic sea receiving fresh waters from the river Po. Sediment cores (10 cm) were sectioned into four layers which were analysed separately for redox potential (Eh), total phosphorus (TP), total organic carbon (TOC), humic (HA) and fulvic acid (FA) content. The structure of HA and FA was also investigated. The results showed that the TOC and TP content decreased from the coast to the open-sea stations. Humic and fulvic acid concentrations were also inversely correlated to the distance from the coast. Moreover, the humic and fulvic acids were closely correlated to the total organic content and to the total phosphorus content. The correlations found between humic substances (HS) and TOC and TP, respectively, could be explained both by an in situ formation due to the high content of nutrients and organic matter, and by a common source of HS, TOC and TP, namely the River Po discharge. The predominant presence of aliphatic carbon in the humic structures, the low degree of substitution and the high nitrogen content suggest that primarily humified compounds were formed in situ. Nevertheless, the River Po can act both as supplier of organic matter of which decomposition products lead to the formation of humic compound and as carrier of humified compounds.

Copper and other trace elements strongly bound to humic acids along sediment cores in the Ross Sea, Antarctica.

Marine sediment cores sampled in three different areas, during the 1997/98 Italian Antarctic Expedition, were studied. The cores (40 cm) were immediately subdivided into 13 or 14 layers (2-4 cm) in order to obtain a high-depth resolution in the metal content and humic substance analyses. The results obtained for the amount of metals strongly bound to humic acids showed the following order: Cu >> Zn >> Co > As >or= Mn. The fraction of Cu, Zn and As bound to humic acid (microg g(-1) of HA) increases in the first 10-12 cm of cores, then a decrease is observed. This observation could be related both to the presence of a mobile fraction of metals in sediments successively bound to humic acids and to different structural features showed by humic acids along the cores, due to transformation processes. For the other metals a variable pattern along the cores was found.

Metal-contaminated soil remediation by means of paper mill sludges addition: chemical and ecotoxicological evaluation.

Metal pollution of soils is a great environmental problem. The major risks due to metal pollution of soil consist of leaching to groundwater and potential toxicity to plants and/or animals. The objective of this study is to evaluate by means of chemical and ecotoxicological approach the effects of paper mill sludge addition on the mobile metal fraction of polluted metal soils. The study was carried out on acidic soil derived from mining activities and thus polluted with heavy metals, and on two paper mill sludges having different chemical features. The results obtained by leaching experiments showed that the addition of a paper mill sludge, consisting mainly of carbonates, silicates and organic matter, to a heavy-metal polluted soil produces a decrease of available metal forms. The carbonate content seems to play a key role in the chemical stabilisation of metals and consequently in a decrease of toxicity of soil. The leached solutions have a non-toxic effect. The mild remediation by addition of sludge has moreover a lasting effect.

Laboratory-polluted soils: a methodological approach to establish equilibrium conditions for different metal chemical forms in soils.

An approach based on the number of extractions performed over time was applied to study the time necessary to attain equilibrium conditions between the different chemical forms present in two natural soils laboratory-loaded with heavy metals (Cu(II), Pb(II), Zn(II)). The influence of some soil parameters, such as pH value, cation exchange capacity and organic matter content, on the equilibrium time was evidenced both by the different nature of the soils and by the treatment of soils with paper mill sludge. Equilibrium conditions were determined by studying the metal partitioning in the soil on a case by case basis. The behaviour of the three metals was not the same, and the conditions of equilibrium among the different chemical forms were the result of the amount of heavy metals added as well as of the nature of the soil.

Metal ion removal from water by sorption on paper mill sludge.

Chromatographic columns packed with paper mill sludge are employed for metal ion recovery from water. The breakthrough curves show that cadmium, copper, lead and silver are removed from acid solutions (pH 2, 4); the affinity series is Pb(II)>Cu(II)>Ag(I)>Cd(II). Both the amount of metal retained and the metal-matrix interaction are pH dependent; the sorptive capacity increases with increasing pH. When the metals are present together at the same initial concentrations a competition among the different ions occurs although the affinity order remains unchanged. In metal recovery from the paper mill sludge column, the total amount of the cadmium and copper is displaced by HCl 1.0 M, 65% of the lead by HCl 0.1 M and 75% of the silver by HNO(3) 0.1 M. More than 95% of copper and lead and less than 20% of cadmium were recovered with HCl 0.1 M when the metals were present at the same time.

Adsorption of phenols by papermill sludges.

In this paper we studied the sorption capacity of paper mill sludges for phenols. Phenol, 2-chlorophenol (2-CP), 3-chlorophenol 3-CP). 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), 2.4-dichlorophenol (2,4-DCP), 3,4-dichlorophenol (3,4-DCP) 3,5-dichlorophenol (3,5-DCP) and 2,4,5-trichlorophenol (2,4,5-TCP) were chosen for the sorption tests. Kinetic experiments showed that substituted-phenol sorption on papermill sludge was rapid (equilibrium was reached after 3 h); conversely, the time taken by the phenol to reach equilibrium conditions was 260 h. Experimental data showed that particle diffusion was involved in the sorption process but was not the only rate-limiting mechanism; several other mechanisms were involved. The adsorption isotherms showed the following order of retention capacity of papermill sludge: 2-NP = 4-NP < < 2-CP < phenol < 4-CP < or = 3-CP < 2,4 DCP<3,4 DCP=2,4,5 TCP<3,5 DCP. In all cases the experimental data showed a good fit with the Hill equation. which is mathemratically equivalent to the Langmuir-Freundlich model obtained by assuming that the surface is homogeneous, and that the adsorption is a cooperative process influenced by adsorbate-adsorbate interactions.

Municipal landfill leachate-soil interactions: a kinetic approach.

On investigating the effects of municipal landfill leachates on soils, it is found that the adsorption of landfill leachate constituents creates a "new" soil surface able to enhance heavy metal uptake. In particular, the treatment of soil with the total leachates led to an increase in its metal retention capability that was much higher than for each individual fraction. Results show that the leachate sorption on soil is regulated by the presence of leachate constituents with low molecular weight cut-off since these fractions are able to "accelerate" the sorption of higher molecular weight fractions. The rapidly sorbed lower molecular weight fractions create a different soil surface that is able to accommodate the high molecular weight constituents.

Characteristics of different molecular weight fractions of organic matter in landfill leachate and their role in soil sorption of heavy metals.

We have characterised two kinds of municipal landfill leachates derived from 'old' and 'young' municipal waste landfills on the basis of the molecular weight distribution of the constituents, taking into account that the great variety of leachate constituents prevents any evaluation of the fate and of the role played by each component in the environmental impact. In the sample S1 (old leachate), the constituents were distributed over a wider range of molecular weights; high molecular weight fractions were present. In sample S2 (young leachate), the fractions are actually narrower at the lower molecular weights. The high molecular weight fractions of old leachates are found to be complex structures formed by condensed nuclei of carbons substituted by functional groups containing nitrogen, sulphur and oxygen atoms; the low molecular weight fractions of leachates are, instead, characterised by linear chains substituted by oxygenated functional groups such as carboxyl and/or alcoholic groups. After characterising each fraction we studied the role played by these fractions in the soil's capability for retaining heavy metals [copper (Cu) and cadmium(Cd)]. The Cd uptake increases only on the soil treated with sample S1 characterised by a higher pH value and by the presence of high molecular weight fractions. The Cu uptake also increases on the soil treated with sample S2, characterised by the sole presence of low molecular weight fractions. On the other hand, the metal adsorption tests performed on soil treated with the single fractions show that the amount of Cu and Cd retained by soil treated with the high molecular weight fractions of sample does not increase after 72 h of treatment and that the amount of Cu retained by the low molecular weight fractions of sample S1 and by the fractions of sample S2 increases, but does not justify the amount retained by soil treated with the total leachates.

Effects of acid rain on soil humic compounds.

The modifications induced by acid rain on the solubility, molecular configuration and molecular weight distribution of humic (HA) and fulvic (FA) acids were studied. A natural soil was subjected to simulated acid rain until a soil pH of 4 was obtained; HA and FA acids were then extracted and characterised. The results obtained were compared both with those of natural soil and with those of a soil subjected to acid rain. Elute analysis indicates the continuous release of soluble organic compounds as a consequence of acid rain simulation, although no relationship was found with the process of soil acidification. The yields of HA and FA show that HA values are the same while FA amount is higher in the natural soil; in acid soils their water solubility increases. The molecular weight distribution shows that HA consist of a mixture of compounds of different molecular weights; they are molecules for the most part larger than 100 kDa and their distribution is not changed by soil acidification. FA can be considered to form a much more homogeneous system; in natural soil, the molecules are larger than 50 kDa, while in acidified soil they are for the most part smaller than 3 kDa.

Changes in copper, lead and zinc concentrations in plants from paper mill sludge-treated soils.

Effects of paper mill sludge addition on the availability of metals were studied on different soils both laboratory and naturally polluted; copper, lead and zinc concentrations were determined in Hordeum Distichum plants grown on the untreated and on sludge-treated soils. In some case a decrease of metal concentration is observed on sludge-treated soils; these results are consistent with the reduction of metal mobile forms in the soil, before plant growth. The decrease of metal availability in sludge-treated soils may be related with the pH value of the soil after sludge addition.

Chemical analysis of water of the Anticolana Valley: isolation of humic compounds.

The purpose of this study was to identify and characterize humic compounds in Anticolana Valley (Fiuggi) water. The capacity of this class of compounds to mobilize metals from solid phases could have an important role in calculi solubilization. Humic compounds were isolated, purified and characterised by FTIR, 1H-NMR and 13C-NMR spectroscopy, thermogravimetry and elemental analysis. Only fulvic acids were found. They are mainly composed of aliphatic chains, made of six -CH2O- groups and contain a number of carboxylic groups, responsible for their metal complexing capacity.

The structural composition of humic compounds as indicator of organic carbon sources.

Various analytical techniques ((13)C-NMR, FTIR, elemental analysis) have been used to study the structures of humic compounds present in the sediments of Martignano lake located 50 km from Roma city (Italy). The total amount of humic compounds present in the upper layer of sediments is practically constant; instead, considering humic (HA) and fulvic acids (FA) separately, it can be noticed that while HA increase remarkably from A(1) to A(3), FA diminish, probably as a result of the continuous transformation of algal debris, present in large amount in A(1), from compounds which are in an early stage of decomposition to more highly degraded organic matter. In deeper layers the percentage both of HA and FA is constant and slightly lower than that found in the upper layer, except for two sampling points. In these stations the amount of both HA and FA are very high and the carbohydrate peak areas of HA and FA increase along with the depth, reflecting the presence of a well localized source of organic carbon or different environmental conditions.

Purification of soluble fulvic acid low concentrations by a diafiltration technique.

The purification of soluble fulvic acids (FA) based on a diafiltration technique is carried out on antarctic water and snow samples, characterised by low humic compound content (0.1-0.8 mg/l). Results are compared with those of FA purified with the dialysis technique that, together with ion-exchange resins, performs an often used purification process. With the adopted procedure it is possible to minimise the high content of inorganic salts deriving in part from the isolation method XAD-8 adopted, as shown by FTIR, elemental and thermogravimetric analysis.