Near- and Far-Field Observation of Phonon Polaritons in Wafer-Scale Multilayer Hexagonal Boron Nitride Prepared by Chemical Vapor Deposition.

Polaritons in layered materials (LMs) are a promising platform to manipulate and control light at the nanometer scale. Thus, the observation of polaritons in wafer-scale LMs is critically important for the development of industrially relevant nanophotonics and optoelectronics applications. In this work, phonon polaritons (PhPs) in wafer-scale multilayer hexagonal boron nitride (hBN) grown by chemical vapor deposition are reported. By infrared nanoimaging, the PhPs are visualized, and PhP lifetimes of ≈0.6 ps are measured, comparable to that of micromechanically exfoliated multilayer hBN. Further, PhP nanoresonators are demonstrated. Their quality factors of ≈50 are about 0.7 times that of state-of-the-art devices based on exfoliated hBN. These results can enable PhP-based surface-enhanced infrared spectroscopy (e.g., for gas sensing) and infrared photodetector applications.

Atypical reversed pressure-induced phase transformation in Ge nanowires.

Phase transformations of Ge under compression/decompression cycle at room temperature were studied in a diamond anvil cell (DAC) using in situ synchrotron x-ray diffraction, Raman spectroscopy and near infrared absorption techniques. Upon compression similar behavior is observed in nanowires and in bulk although a higher stability is observed in nanowires. The cubic-diamond phase (Ge-3C), the most energetically favorable phase, transforms into the ß-tin metallic phase at high pressure and the reverse Ge-ß-tin to Ge-3C transformation is generally inhibited by kinetics when pressure is released. While the transformation in Ge bulk leads mostly to Ge-ST12 phase, the loading/unloading cycle of Ge nanowires in DAC leads back to Ge-3C, exhibiting unprecedented size effects. A comprehensive characterization of the final states is described.

Galvanic Replacement Reaction as a Route to Prepare Nanoporous Aluminum for UV Plasmonics.

There is a growing interest in extending plasmonics applications into the ultraviolet region of the electromagnetic spectrum. Noble metals are commonly used in plasmonic, but their intrinsic optical properties limit their use above 350 nm. Aluminum is probably the most suitable material for UV plasmonics, and in this work we fabricated substrates of nanoporous aluminum starting from an alloy of Al2Mg3. The porous metal is obtained by means of a galvanic replacement reaction. Such nanoporous metal can be exploited to achieve a plasmonic material suitable for enhanced UV Raman spectroscopy and fluorescence. Thanks to the large surface to volume ratio, this material represents a powerful platform for promoting interaction between plasmonic substrates and molecules in the UV.

3D nanoporous antennas as a platform for high sensitivity IR plasmonic sensing.

Nanoporous gold can be exploited as plasmonic material for enhanced spectroscopy both in the visible and in the near-infrared spectral regions. In particular, the peculiar morphology of such a substrate leads to a higher field confinement with respect to conventional plasmonic materials. This property can be exploited to achieve extremely high sensitivity to the changes in environmental conditions, making it an interesting tool for the development of sensors and biosensors. Here, we compared the sensitivity of a plasmonic resonator made of nanoporous gold with a similar structure made of homogeneous gold. To assess the enhanced sensitivity the same stoichiometric quantity of dielectric material was deposited via Atomic Layer Deposition onto the two considered structures. Experimental results proved the higher sensitivity was achievable using nanoporous gold. In particular, such 3D nanoporous structures can be proposed as a promising sensing platform in the near-infrared with a sensitivity over 4.000 nm/RIU.

Controlling the Heat Dissipation in Temperature-Matched Plasmonic Nanostructures.

Heat dissipation in a plasmonic nanostructure is generally assumed to be ruled only by its own optical response even though also the temperature should be considered for determining the actual energy-to-heat conversion. Indeed, temperature influences the optical response of the nanostructure by affecting its absorption efficiency. Here, we show both theoretically and experimentally how, by properly nanopatterning a metallic surface, it is possible to increase or decrease the light-to-heat conversion rate depending on the temperature of the system. In particular, by borrowing the concept of matching condition from the classical antenna theory, we first analytically demonstrate how the temperature sets a maximum value for the absorption efficiency and how this quantity can be tuned, thus leading to a temperature-controlled optical heat dissipation. In fact, we show how the nonlinear dependence of the absorption on the electron-phonon damping can be maximized at a specific temperature, depending on the system geometry. In this regard, experimental results supported by numerical calculations are presented, showing how geometrically different nanostructures can lead to opposite dependence of the heat dissipation on the temperature, hence suggesting the fascinating possibility of employing plasmonic nanostructures to tailor the light-to-heat conversion rate of the system.

Midinfrared Plasmon-Enhanced Spectroscopy with Germanium Antennas on Silicon Substrates.

Midinfrared plasmonic sensing allows the direct targeting of unique vibrational fingerprints of molecules. While gold has been used almost exclusively so far, recent research has focused on semiconductors with the potential to revolutionize plasmonic devices. We fabricate antennas out of heavily doped Ge films epitaxially grown on Si wafers and demonstrate up to 2 orders of magnitude signal enhancement for the molecules located in the antenna hot spots compared to those located on a bare silicon substrate. Our results set a new path toward integration of plasmonic sensors with the ubiquitous CMOS platform.

An integrated superhydrophobic-plasmonic biosensor for mid-infrared protein detection at the femtomole level.

In this work we present an integrated biosensor that enables FTIR (Fourier Transform-Infrared) detection of analytes contained in diluted solutions. The fabricated nanosensor allows for the detection of proteins through the identification of the fine structure of their amide I and II bands, up to the nanomolar concentration range. We exploited two distinct effects to enhance the sensitivity: (i) the concentration effect due to the presence of the superhydrophobic surface that conveys molecules dispersed in solution directly inside the focus of a FTIR spectromicroscope; (ii) the plasmonic resonance of the nanoantenna array that provides electromagnetic field enhancement in the amide I and II spectral region (1500-1700 cm(-1)). We demonstrate the detection of ferritin in the nanomolar concentration range, a blood protein that is usually available in small amounts in typical blood samples.