ABSTRACT
Bituminous mixtures are not perfectly elastic materials, so their viscoelastic properties play a decisive role in knowing their behavior. This research aims to find out this behavior through the values of the resilient modulus, the dynamic modulus, and the fatigue life for asphalt concrete and porous mixtures when they are influenced by the presence of salt (NaCl, sodium chloride). The aforementioned influence of salt has been evaluated by utilizing three different methods: submerging specimens of bituminous mixture in salt water; introducing salt into the specimens as if it was aggregate and immersing the aggregate in salt water; and drying it and then manufacturing the bituminous mixture with it. As the results indicate, the mixtures submerged in salt water do not show large differences in comparison to the reference mixtures for hot mix asphalt and porous mixtures. However, for hot mix asphalt in which salt has been added as aggregate, the resilient modulus is greater than in the reference mixture. For the bituminous mixtures in which an aggregate saturated in salt water has been used for its manufacture, the results of the resilient modulus test, dynamic modulus test, and fatigue life test are lower than in the reference mixture, especially when the specimens are submerged.
ABSTRACT
The compaction control of random fills has developed very little due to the limitations of particle sizes, with methods usually using a simple procedural control. In order to develop new quality control procedures for random slate filling, the necessary field work and laboratory tests were carried out. New test procedures for wheel-tracking or settlement tests have been successfully investigated. A total of 4500 in situ measurements of density and 580 topographic settlements, 960 wheel-tracking trolley tests and more than 130 slab rolling tests have been determined. An analysis of variance (ANOVA) has been carried out, obtaining correlations between tests in order to replace the deductibles. The variables that were used to analyze variance were the average lot density, the average settlement between last and first roller pass, the average wheel impression after test carriage, the first vertical modulus of the plate bearing test (PLT), the second vertical modulus of the PLT and the relation between second and first modulus of the PLT. The research proposes a new procedure for the quality control of the compaction of the randomized slate filling used in the crown area.
ABSTRACT
Particle size can be a problem in terms of rockfill compaction control methods, with little practical development of these techniques. The necessary fieldwork and laboratory tests were carried out to develop new quality control procedures for granite rockfill. This involved the revision of certain tests like the wheel-tracking or topographic settlement tests. More than 1100 in-situ density and moisture content measurements were performed for this research. In addition, more than 220 topographic settlements and 250 wheel-tracking carriage tests were carried out. The quality control processes were completed with 24 plate bearing tests. The results of granite rockfills were classified according to their use in the different areas of core or crown. Possible evidence of statistical correlations between compaction control tests was identified. An analysis of variance (ANOVA) was performed. When testing proved relationships between them, the replacement of one by the other was evaluated by deduction. Finally, the study suggests new procedures for compaction quality control of granite rockfill for its application in core and crown.
