ABSTRACT
We demonstrate 2.6 µm mid-infrared lasing at room temperature in a planar waveguide structure. Planar waveguides were fabricated using pulsed laser deposition (PLD) by depositing chromium doped zinc selenide thin films on sapphire substrate (Cr2+:ZnSe/sapphire). Highly doped Cr2+:ZnSe/Sapphire thin film sample was also used to demonstrate passive Q-switching of Er:YAG laser operating at 1.645 µm.
Subject(s)
Chromium/chemistry , Lasers , Oscillometry/instrumentation , Refractometry/instrumentation , Selenium Compounds/chemistry , Surface Plasmon Resonance/instrumentation , Zinc Compounds/chemistry , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Infrared RaysABSTRACT
Biphasic calcium phosphates comprising well-controlled mixtures of nonresorbable hydroxyapatite and other resorbable calcium phosphate phases often exhibit a combination of enhanced bioactivity and mechanical stability that is difficult to achieve in single-phase materials. This makes these biphasic bioceramics promising substrate materials for applications in bone tissue regeneration and repair. In this paper we report the synthesis of highly crystalline, biphasic coatings of hydroxyapatite/tetracalcium phosphate with control over the weight fraction of the constituent phases. The coatings were produced by pulsed laser deposition using ablation targets of pure crystalline hydroxyapatite. The fraction of tetracalcium phosphate phase in the coatings was controlled by varying the substrate temperature and the partial pressure of water vapor in the deposition chamber. A systematic study of phase composition in the hydroxyapatite/tetracalcium phosphate biphasic coatings was performed with X-ray diffraction. Tetracalcium phosphate in the coatings obtained at high substrate temperature is not formed by partial conversion of previously deposited hydroxyapatite. Instead, it is produced by nucleation and growth of tetracalcium phosphate itself from the ablation products of the hydroxyapatite target or by accretion of tetracalcium phosphate grains formed during ablation. This finding was confirmed by formation of calcium oxide, not tetracalcium phosphate, after annealing of pure hydroxyapatite coatings at high temperatures of 700-850 degrees C.
