In Situ Preparation of Dehydrodieugenol-Loaded Silver Nanoparticles and their Antischistosomal Activity.

Schistosomiasis is a major neglected disease that imposes a substantial worldwide health burden, affecting approximately 250 million people globally. As praziquantel is the only available drug to treat schistosomiasis, there is a critical need to identify new anthelmintic compounds, particularly from natural sources. To enhance the activity of different natural products, one potential avenue involves its combination with silver nanoparticles (AgNP). Based on this approach, a one-step green method for the in situ preparation of dehydrodieugenol (DHDG) by oxidation coupling reaction using silver and natural eugenol is presented. AgNP formation was confirmed by UV-Vis spectroscopy due to the appearance of the surface plasmon resonance (SPR) band at 430 nm which is characteristic of silver nanoparticles. The nanoparticles were spherical with sizes in the range of 40 to 50 nm. Bioassays demonstrated that the silver nanoparticles loaded with DHDG exhibited significant anthelmintic activity against Schistosoma mansoni adult worms without toxicity to mammalian cells and an in vivo animal model (Caenorhabditis elegans), contributing to the development of new prototypes based on natural products for the treatment of schistosomiasis.

Electrical and mechanical properties of self-supported hydroxypropyl methylcellulose-polyaniline conducting films.

The purpose of this work was to develop a simple method to produce self-supported films composed of hydroxypropyl methylcellulose (HPMC) and polyaniline (PANI) by the direct mixture of aqueous dispersions of both polymers with subsequent drying. The addition of HPMC, a cellulose derivative with an excellent film-forming capacity, was fundamental to overcoming the poor processability of PANI, which impairs its use in many technological applications. All films showed conductivity in the order of 10-2 to 10-3 S cm-1, which is in the range for metals or semiconductors. The typical electroactivity of PANI was also maintained in the hybrid films. The thermal stability and the mechanical properties of the pristine PANI were also improved with the addition of HPMC. Cellulose-containing conducting polymers can be considered a material of the future, with possible applications in several areas, such as smart wallpapers, e-papers, and sensors.

Antitrypanosomal Lactones from Nectandra barbellata.

Twigs of Nectandra barbellata were extracted using a solution of the ionic liquid 1-butyl-3-methylimidazolium bromide (BMImBr) in H2O, assisted by microwave (MAE). After successive chromatographic steps, one sesquiterpene, costic acid, and three new related lactones, (R)-3(7)-Z-3-hexadec-21-enylidene-5-(hydroxymethyl)tetrahydrofuran-2-one (1), (R)-3(7)-Z-3-hexadecylidene-5-(hydroxymethyl)tetrahydrofuran-2-one (2), and (R)-3(7)-Z-3-docosylidene-5-(hydroxymethyl)tetrahydrofuran-2-one (3), were isolated. After structural elucidation using IR, UV, HRESIMS, NMR, ECD, and VCD, compounds 1-3 were tested against trypomastigote forms of Trypanosoma cruzi. The mechanism of action of bioactive isolated compounds was studied using different fluorescent-based approaches to investigate alterations of the plasma membrane, permeability/electric potential (ΔΨp), reactive oxygen species levels, mitochondria (electric membrane potential, ΔΨm/ATP levels), Ca2+ levels, and pH of the acidocalcisomes. In addition, in silico studies predicted no resemblance to pan assay interference compounds (PAINS).

Free-standing cellulose film containing manganese dioxide nanoparticles and its use in discoloration of indigo carmine dye.

In this study, we report the production of a free-standing film of non-modified cellulose impregnated with 12 wt.% of MnO2 nanoparticles with less than 100 nm in size. The method here described can be applied to the immobilization of different types of nanoparticles. The film was prepared by dissolving microcrystalline cellulose in an ionic liquid followed by its regeneration by adding water to the former solution. Then, the wet film was impregnated with the nanoparticles by dipping it in a MnO2 dispersion. Electron microscopy images revealed manganese dioxide nanoparticles distributed not only at the film surface but also in its interior. The cellulose film impregnated with MnO2 nanoparticles was capable of efficiently discolouring an Indigo Carmine dye solution in 25 min upon ambient light. The film was easily removed from the dye solution and repeatedly reused for at least 10 times without losing its discolouring efficiency.

Production of self-supported conductive films based on cellulose, polyaniline and silver nanoparticles.

Synthetic efforts are being made to produce electrical conductive films based on a combination of cellulose matrix with conducting polymers. Improved mechanical properties and processability of the conducting polymers can be attained by promoting this combination, allowing the production of electrical conductive membranes or sheet of paper-like forms that have many technological uses. Cellulose films containing different amounts of polyaniline combined to silver nanoparticles were prepared in homogenous conditions by the dissolution of microcrystalline cellulose in 1-butyl-3-methylimidazolium chloride ionic liquid, followed by the mixing with dispersion of silver nanoparticles and polyaniline also prepared in an ionic liquid. Films with high electrical conductivities (23-34 S·cm-1) and homogeneous distribution of the constituents were produced. The high conductivity was promoted by the presence of polyaniline in its most conductivity state with the silver nanoparticles affording the electrical contact among these chains creating a conductive network spread throughout the insulating cellulose matrix.

Physicochemical properties of three ionic liquids containing a tetracyanoborate anion and their lithium salt mixtures.

Given their relevant physicochemical properties, ionic liquids (ILs) are attracting great attention as electrolytes for use in different electrochemical devices, such as capacitors, sensors, and lithium ion batteries. In addition to the advantages of using ILs containing lithium cations as electrolytes in lithium ion batteries, the Li(+) transport in ILs containing the most common anion, bis(trifluoromethanesulfonyl) imide anion ([Tf2N]), is reportedly small; therefore, its contribution to the overall conductivity is also low. In this work, we describe the preparation and characterization of two new and one known IL containing the tetracyanoborate anion ([B(CN)4]) as the anionic species. These ILs have high thermal and chemical stabilities, with almost twice the ionic conductivity of the [Tf2N] ILs and, most importantly, provide a greater role for the Li(+) ion throughout the conductivity process. The experimental ionic conductivity and self-diffusion coefficient data show that the [B(CN)4]-based ILs and their Li(+) mixtures have a higher number of charge carriers. Molecular dynamics simulations showed a weaker interaction between Li(+) and [B(CN)4] than that with [Tf2N]. These results may stimulate new applications for ILs that have good Li(+) transport properties.

Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy.

Hybrid organic-inorganic material containing Laponite clay and ionic liquids forming cations have been prepared and characterized by FT-Raman spectroscopy, X-ray diffraction, and thermal analysis. The effect of varying the length of the alkyl side chain and conformations of cations has been investigated by using different ionic liquids based on piperidinium and imidazolium cations. The structure of the N,N-butyl-methyl-piperidinium cation and the assignment of its vibrational spectrum have been further elucidated by quantum chemistry calculations. The X-ray data indicate that the organic cations are intercalated parallel to the layers of the clay. Comparison of Raman spectra of pure ionic liquids with different anions and the resulting solid hybrid materials in which the organic cations have been intercalated into the clay characterizes the local environment experienced by the cations in the hybrid materials. The Raman spectra of hybrid materials suggest that the local environment of all confined cations, in spite of this diversity in properties, resembles the liquid state of ionic liquids with a relatively disordered structure.

Effect of SO2 on the transport properties of an imidazolium ionic liquid and its lithium solution.

Transport coefficients have been measured as a function of the concentration of sulfur dioxide, SO(2), dissolved in 1-butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, [BMMI][Tf(2)N], as well as in its lithium salt solution, Li[Tf(2)N]. The SO(2) reduces viscosity and density and increases conductivity and diffusion coefficients in both the neat [BMMI][Tf(2)N] and the [BMMI][Tf(2)N]-Li[Tf(2)N] solution. The conductivity enhancement is not assigned to a simple viscosity effect; the weakening of ionic interactions upon SO(2) addition also plays a role. Microscopic details of the SO(2) effect were unraveled using Raman spectroscopy and molecular dynamics (MD) simulations. The Raman spectra suggest that the Li(+)-[Tf(2)N] interaction is barely affected by SO(2), and the SO(2)-[Tf(2)N] interaction is weaker than previously observed in an investigation of an ionic liquid containing the bromide anion. Transport coefficients calculated by MD simulations show the same trend as the experimental data with respect to SO(2) content. The MD simulations provide structural information on SO(2) molecules around [Tf(2)N], in particular the interaction of the sulfur atom of SO(2) with oxygen and fluorine atoms of the anion. The SO(2)-[BMMI] interaction is also important because the [BMMI] cations with above-average mobility have a larger number of nearest-neighbor SO(2) molecules.

Ether-bond-containing ionic liquids and the relevance of the ether bond position to transport properties.

The ionic liquids (ILs) 1-ethoxyethyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMI][Tf(2)N], and N-(ethoxyethyl)-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMor][Tf(2)N] were synthesized, and relevant properties, such as thermal stability, density, viscosity, electrochemical behavior, ionic conductivity, and self-diffusion coefficients for both ionic species, were measured and compared with those of their alkyl counterparts, 1-n-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [BMMI][Tf(2)N], and N-n-butyl-N-methylpiperidinium bis(trifluoromethanesulfonyl)imide, [BMP][Tf(2)N] and N-n-butyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide [BMMor][Tf(2)N]. This comparison was done to evaluate the effects caused by the presence of the ether bond in either the side chain or in the organic cation ring. The salt, LiTf(2)N, was added to the systems to estimate IL behavior with regard to lithium cation transport. Pure [EtO(CH(2))(2)MMI][Tf(2)N] and their LiTf(2)N solutions showed low viscosity and the highest conductivity among the ILs studied. The H(R) (AC conductivity/NMR calculated conductivity ratio) values showed that, after addition of LiTf(2)N, ILs containing the ether bond seemed to have a greater number of charged species. Structural reasons could explain these high observed H(R) values for [EtO(CH(2))(2)MMor][Tf(2)N].