Do carcass traits influence consumer perception of pork eating quality?

The objective of this study was to assess carcass traits' influence on pork eating quality as evaluated by consumers. A total of 1360 pork chops were used, with 824 from the sirloin end and 536 from the butt end of the loin (Longissimuss thoracis et lumborum), to produce 340 packages, each containing four pork chops. Untrained participants received one package of either sirloin or butt chops, being two pork chops from barrows and two from gilts. Participants answered a survey rating the tenderness, juiciness, flavour, and overall acceptability of each chop on an 8-point scale. Correlation analysis was conducted between carcass traits and pork eating quality attributes. For the descriptive analysis, classes (low, medium, and high) for carcass traits, Warner-Bratzler shear force (WBSF) and cooking loss were created based on our consumer responses dataset for palatability attributes. No significant correlations (P > 0.05) were observed between carcass traits and pork eating quality traits. Tenderness and overall acceptability were negatively correlated (P < 0.05) with cooking loss and WBSF. Loin intramuscular fat (IMF) content showed a weak negative correlation (P < 0.05) with WBSF and cooking loss. Consumers rated chops from the high and medium/high backfat thickness and loin IMF classes slightly higher for tenderness and juiciness, respectively. Additionally, chops from the low and/or medium WBSF and cooking loss classes received slightly higher scores for tenderness and juiciness than pork chops in the high classes. In conclusion, the study indicated that carcass traits had minimal impact on overall acceptability of pork by consumers.

A comparison of carcass characteristics, carcass cutting yields, and meat quality of barrows and gilts.

Objectives of this research were to compare carcass characteristics, carcass cutting yields, and meat quality for market barrows and market gilts. Commercially-sourced carcasses from 168 market barrows and 175 market gilts weighing an average of 107.44 ± 7.37 kg were selected from 17 different slaughter groups representing approximately 3,950 carcasses. Each group was sorted into percentiles based on hot carcass weight with an equal number of barrows and gilts selected from each quartile so that weight minimally confounded parameters of interest. Carcass lean yield was determined for carcasses following fabrication (i.e. dissection of lean, fat, and bone tissue components) and meat quality measurements were evaluated at the time of fabrication (24 to 72 h postmortem) and following 14-d of postmortem storage. Data were analyzed as a randomized complete block design with carcass serving as the experimental unit, sex (barrow or gilt), the three hot carcass weight quantiles (light [<104 kg]; average [104 to 110 kg]; heavy [>110 kg]), and the interaction between sex and hot carcass weight quantile serving as fixed effects, and producer nested within slaughter event serving as a random effect. Results from the study demonstrated that gilt carcasses were leaner (3 mm less backfat thickness; 3.5 cm2 greater loin muscle area, 1.52% greater merchandized-cut yield, and 2.92% greater dissected carcass lean yield; P < 0.01) than barrow carcasses, while loins from barrows were higher quality (0.43% more intramuscular fat and slightly less shear force; P < 0.01) than loins from gilts. While this study confirms the well-known biological principle that barrow carcasses have greater levels of fat deposition and lower levels of carcass leanness when compared with gilt carcasses, this study provides a much-needed quantification of these differences for the commercial industry that will undoubtedly be useful as new technologies emerge in upcoming years.

An update of the predicted lean yield equation for the Destron PG-100 optical grading probe.

The objective was to update the equation used for prediction of pork carcass leanness with the Destron PG-100 optical grading probe. A recent cutout study (completed in 2020-2021) consisting of 337 pork carcasses was used for this research. An updated equation was generated using a calibration dataset (N = 188 carcasses) and prediction precision and prediction accuracy of the new equation was evaluated using a validation dataset (N = 149 carcasses). The updated equation was generated using forward stepwise multiple regression selection techniques in PROC REG of SAS, and the same parameters as the existing equation were used to fit the model. The updated Destron equation [89.16298 - (1.63023 × backfat thickness) - (0.42126 × muscle depth) + (0.01930 × backfat thickness2) + (0.00308 × muscle depth2) + (0.00369 × backfat thickness × muscle depth)] and the existing Destron equation [68.1863 - (0.7833 × backfat thickness) + (0.0689 × muscle depth) + (0.0080 × backfat thickness2) - (0.0002 × muscle depth2) + (0.0006 × backfat thickness × muscle depth)] were similar in their prediction precision for determination of carcass lean yield (LY), with the updated equation R2 = 0.75 and root mean square error (RMSE) = 1.97 and the existing equation R2 = 0.75 and RMSE = 1.94. However, when prediction accuracy was evaluated using the variance explained by predictive models based on cross-validation (VEcv) and Legates and McCabe's efficiency coefficient (E1), the updated equation (VEcv = 67.97%; E1 = 42.41%) was much more accurate compared with the existing equation (VEcv = -117.53%; E1 = -69.24%). Furthermore, when accuracy was evaluated by separating carcasses into 3% carcass LY groupings ranging from less than 50% LY to greater than 62% LY, the existing equation correctly estimated carcass LY 8.1% of the time, while the updated equation correctly estimated carcass LY 47.7% of the time. In an effort to further compare the abilities of the updated equation, comparisons were made with an advanced automated ultrasonic scanner (AutoFom III), which scans the entire carcass. The prediction precision of the AutoFom III was R2 = 0.83 and RMSE = 1.61, while the AutoFom III correctly estimated carcass LY 38.2% of the time and prediction accuracy calculations for the AutoFom III were VEcv = 44.37% and E1 = 21.34%). Overall, refinement of the Destron PG-100 predicted LY equation did not change prediction precision, but substantially improved prediction accuracy.

In the swine industry, optical grading probes are used to collect measurements at one location on the carcass (i.e., the grading site); this information is used to predict carcass leanness with an established multiple regression equation. For the Destron PG-100 optical probe, the equation currently used by the industry was established using the 1992 Canadian National Cutout Study. The objective of the current study was to update the equation by utilizing a recent cutout study consisting of 337 pork carcasses (N = 188 for the calibration dataset; N = 149 for the validation dataset). A multiple regression equation was generated with the calibration dataset using stepwise techniques and the same parameters as the existing equation were used to fit the model. When the validation dataset was tested for prediction precision, the existing Destron predicted lean yield (LY) equation (R2 = 0.75) and the updated Destron predicted LY equation (R2 = 0.75) were strikingly similar in their abilities to predict carcass LY. However, when prediction accuracy was evaluated by separating carcasses into six 3% LY groupings, the existing Destron predicted LY equation correctly estimated LY 8.1% of the time, while the updated Destron predicted LY equation correctly estimated LY 47.7% of the time.

Comparison of an advanced automated ultrasonic scanner (AutoFom III) and a handheld optical probe (Destron PG-100) to determine lean yield in pork carcasses.

This study compared the accuracy of two methods for predicting carcass leanness (i.e., predicted lean yield) with fat-free lean yields obtained by manual carcass side cut-out and dissection of lean, fat, and bone components. The two prediction methods evaluated in this study estimated lean yield by measuring fat thickness and muscle depth at one location with an optical grading probe (Destron PG-100) or by scanning the entire carcass with advanced ultrasound technology (AutoFom III). Pork carcasses (166 barrows and 171 gilts; head-on hot carcass weights (HCWs) ranging from 89.4 to 138.0 kg) were selected based on their fit within desired HCW ranges, their fit within specific backfat thickness ranges, and sex (barrow or gilt). Data (n = 337 carcasses) were analyzed using a 3 × 2 factorial arrangement in a randomized complete block design including the fixed effects of the method for predicting lean yield, sex, and their interaction, and random effects of producer (i.e., farm) and slaughter date. Linear regression analysis was then used to examine the accuracy of the Destron PG-100 and AutoFom III data for measuring backfat thickness, muscle depth, and predicted lean yield when compared with fat-free lean yields obtained with manual carcass side cut-outs and dissections. Partial least squares regression analysis was used to predict the measured traits from image parameters generated by the AutoFom III software. There were method differences (P < 0.01) for determining muscle depth and lean yield with no method differences (P = 0.27) for measuring backfat thickness. Both optical probe and ultrasound technologies strongly predicted backfat thickness (R2 ≥ 0.81) and lean yield (R2 ≥ 0.66), but poorly predicted muscle depth (R2 ≤ 0.33). The AutoFom III improved accuracy [R2 = 0.77, root mean square error (RMSE) = 1.82] for the determination of predicted lean yield vs. the Destron PG-100 (R2 = 0.66, RMSE = 2.22). The AutoFom III was also used to predict bone-in/boneless primal weights, which is not possible with the Destron PG-100. The cross-validated prediction accuracy for the prediction of primal weights ranged from 0.71 to 0.84 for bone-in cuts and 0.59 to 0.82 for boneless cut lean yield. The AutoFom III was moderately (r ≤ 0.67) accurate for the determination of predicted lean yield in the picnic, belly, and ham primal cuts and highly (r ≥ 0.68) accurate for the determination of predicted lean yield in the whole shoulder, butt, and loin primal cuts.

Pork grading is a producer-feedback system that provides carcass trait information (i.e., carcass weight, fat/lean deposition) to determine the economic value of carcasses. Packing plants generally emphasize the optimization of carcass weight and leanness by providing premium or discounted prices using a grid system. Packing plants routinely collect carcass weights while carcass leanness can be more challenging to capture. Since the packing industry does not measure fat/lean deposition for each carcass or each meat cut within the carcass, various technologies are used to predict carcass leanness. These include optical probes, spectral imaging, artificial vision, and others that have been around for decades. A challenge with these technologies is that they often collect measurements at only one location on the carcass, providing information that is not necessarily representative of the entire carcass. The purpose of this study was to compare the accuracy of an advanced automated ultrasonic scanner (AutoFom III) that scans the entire carcass with that of a handheld optical probe (Destron PG-100) that collects measurements from one location on the carcass. In summary, the AutoFom III improved accuracy for determining lean yield with the additional advantage of predicting primal weights when compared with the Destron PG-100.

Development and outcomes of a comprehensive multidisciplinary incidental lung nodule and lung cancer screening program.

BACKGROUND: Appropriate management of lung nodules detected incidentally or through lung cancer screening can increase the rate of early-stage diagnoses and potentially improve treatment outcomes. However, the implementation and management of comprehensive lung nodule programs is challenging. METHODS: This single-center, retrospective report describes the development and outcomes of a comprehensive lung nodule program at a community practice in Tennessee. Computed tomography (CT) scans potentially revealing incidental lung nodules were identified by a computerized search. Incidental or screening-identified lung nodules that were enlarging or not seen in prior scans were entered into a nodule database and guideline-based review determined whether to conduct a diagnostic intervention or radiologic follow-up. Referral rates, diagnosis methods, stage distribution, treatment modalities, and days to treatment are reported. RESULTS: The number of patients with lung nodules referred to the program increased over 2 years, from 665 patients in Year 1 to 745 patients in Year 2. Most nodules were incidental (62-65%). Nodules identified with symptoms (15.2% in Year 1) or through screening (12.6% in Year 1) were less common. In Year 1, 27% (182/665) of nodules required a diagnostic intervention and 18% (121/665) were malignant. Most diagnostic interventions were image-guided bronchoscopy (88%) or percutaneous biopsy (9%). The proportion of Stage I-II cancer diagnoses increased from 23% prior to program implementation to 36% in Year 1 and 38% in Year 2. In screening cases, 71% of patients completed follow-up scans within 18 months. Only 2% of Year 1 patients under watchful waiting required a diagnostic intervention, of which 1% received a cancer diagnosis. CONCLUSIONS: The current study reports outcomes over the first 2 years of a lung cancer screening and incidental nodule program. The results show that the program was successful, given the appropriate level of data management and oversight. Comprehensive lung nodule programs have the potential to benefit the patient, physician, and hospital system.

The synergy professional practice model and its patient characteristics tool: a staff empowerment strategy.

Nurse leaders can positively influence practice environments through a number of empowerment strategies, among them professional practice models. These models encompass the philosophy, structures and processes that support nurses' control over their practice and their voice within healthcare organizations. Nurse-driven professional practice models can serve as a framework for collaborative decision-making among nursing and other staff. This paper describes a provincewide pilot project in which eight nurse-led project teams in four healthcare sectors worked with the synergy professional practice model and its patient characteristics tool. The teams learned how the model and tool can be used to classify patients' acuity levels and make staffing assignments based on a "best fit" between patient needs and staff competencies. The patient characteristics tool scores patients' acuities on eight characteristics such as stability, vulnerability and resource availability. This tool can be used to make real-time patient assessments. Other potential applications for the model and tool are presented, such as care planning, team-building and determining appropriate staffing levels. Our pilot project evidence suggests that the synergy model and its patient characteristics tool may be an empowerment strategy that nursing leaders can use to enhance their practice environments.

Transforming work place relationships through shared decision making.

AIM: Using Donabedian's Structure-Process-Outcomes (SPO) paradigm, this study explored the SPO linkages related to nurse-nurse leader shared decision making around workload issues, such as safe staffing assignments. BACKGROUND: Shared decision making represents nurses' control over practice, which is associated with positive nurse outcomes, such as job satisfaction. This study is based upon four project sites where nurse-led project teams addressed workload issues. METHODS: Participatory action research was used, with the authors acting as participant observers. Four sites were case ordered and analysed: least successful to most successful outcomes. Cross-case matrices were constructed to identify SPO linkages. Data included observation field notes, interviews and focus groups. RESULTS: Operations leaders with formal access to empowerment structures, such as information and resources, were the critical link to successful outcomes. Sites with conflict that blocked team-operations leader relationships were unable to engage in effective, sustainable decision making. CONCLUSIONS: Effective work relationships among teams consisting of staff and front-line leaders contributed to successful outcomes, but team-operations leader relationships made the biggest difference. IMPLICATIONS FOR NURSING MANAGEMENT: Formal access to power through leadership is critical for building and sustaining processes that promote and sustain nurses' control over practice.

A solid-state approach to enable early development compounds: selection and animal bioavailability studies of an itraconazole amorphous solid dispersion.

A solid-state approach to enable compounds in preclinical development is used by identifying an amorphous solid dispersion in a simple formulation to increase bioavailability. Itraconazole (ITZ) was chosen as a model crystalline compound displaying poor aqueous solubility and low bioavailability. Solid dispersions were prepared with different polymers (PVP K-12, K29/32, K90; PVP VA S-630; HPMC-P 55; and HPMC-AS HG) at varied concentrations (1:5, 1:2, 2:1, 5:1 by weight) using two preparation methods (evaporation and freeze drying). Physical characterization and stability data were collected to examine recommended storage, handling, and manufacturing conditions. Based on generated data, a 1:2 (w/w) ITZ/HPMC-P dispersion was selected for further characterization, testing, and scale-up. Thermal data and computational analysis suggest that it is a possible solid nanosuspension. The dispersion was successfully scaled using spray drying, with the materials exhibiting similar physical properties as the screening samples. A simple formulation of 1:2 (w/w) ITZ/HPMC-P dispersion in a capsule was compared to crystalline ITZ in a capsule in a dog bioavailability study, with the dispersion being significantly more bioavailable. This study demonstrated the utility of using an amorphous solid form with desirable physical properties to significantly improve bioavailability and provides a viable strategy for evaluating early drug candidates.

Implementing and measuring the impact of patient navigation at a comprehensive community cancer center.

PURPOSE/OBJECTIVES: To determine whether patient navigation in a comprehensive community cancer center affects patient and staff perceptions of patient preparation for treatment, access to care, and overall satisfaction. DESIGN: Program evaluation with patient and staff surveys. SETTING: Comprehensive community cancer center accredited by the American College of Surgeons in the southeastern United States with 1,037 analytic cases of cancer in 2007; population of the main county served is about 177,963. SAMPLE: 48 patients (28 navigator and 20 non-navigator) and 26 employees, including physicians, nurses, and other support staff. METHODS: A 10-item survey with Likert scale format was sent to a stratified sample of 100 newly diagnosed patients with cancer. A five-item survey with the same format was sent to 40 staff working with the patients. MAIN RESEARCH VARIABLE: Patient navigation. FINDINGS: Patients who received navigation services responded more positively to survey statements. Statistical significance (p > 0.05) was identified in 7 of 10 statements when patient groups were compared. Provider responses indicated agreement with all five statements included in the survey. CONCLUSIONS: Patients with cancer and oncology staff reported that patient navigation is effective in increasing patient satisfaction and decreasing barriers to care. IMPLICATIONS FOR NURSING: Patient navigation is an emerging trend in cancer care. Patient navigators can play a significant role in assisting patients with coordinating services across the continuum of care. Continued research is essential in refining the role and eminence of patient navigators.

3-amido-4-anilinoquinolines as CSF-1R kinase inhibitors 2: Optimization of the PK profile.

The optimization of compounds from the 3-amido-4-anilinoquinolines series of CSF-1R kinase inhibitors is described. The series has excellent activity and kinase selectivity. Excellent physical properties and rodent PK profiles were achieved through the introduction of cyclic amines at the quinoline 6-position. Compounds with good activity in a mouse PD model measuring inhibition of pCSF-1R were identified.

Pro-apoptotic effects of 1'-acetoxychavicol acetate in human breast carcinoma cells.

The tropical ginger compound, 1'-acetoxychavicol acetate (ACA) possesses cancer chemopreventive properties in several models but its effects on breast cancer have not been fully evaluated. In this study, the effects of ACA on human breast carcinoma-derived MCF-7 and MDA-MB-231 cell viability were assessed using trypan blue exclusion analysis. ACA significantly decreased cell viability in a time- and dose-dependent manner, with effective concentrations 10-50 microM. Apoptosis was confirmed by morphological examination of cells through light microscopy, 4,6-diamidino-2-phenylindole dihydrochloride staining, and annexin V/Alexa Fluor 488 staining visualized using flow cytometry. ACA also increased protein expression of the activated form of caspase-3 in MDA-MB-231 cells. Addition of antioxidants N-acetylcysteine, ascorbic acid, or trolox prevented the loss of viability caused by ACA using trypan blue uptake as a marker. These results suggest ACA may have potential anticancer effects against breast carcinoma cells by inducing apoptosis.

Naturally occurring coumarins inhibit 7,12-dimethylbenz[a]anthracene DNA adduct formation in mouse mammary gland.

Naturally occurring coumarins (NOCs) are anti-carcinogenic in the mouse skin model. To characterize the chemopreventive potential of NOCs against breast cancer, we first examined their effects on 7,12-dimethylbenz[a]anthracene (DMBA)-DNA adduct formation in mouse mammary gland. We hypothesized that those NOCs that both inhibited cytochrome P450 1A1/1B1 and induced hepatic glutathione S-transferases (GSTs) would be the most effective in blocking DMBA-DNA adduct formation in mouse mammary gland. To address this hypothesis, simple coumarins (e.g. coumarin and limettin, which induced mouse hepatic GSTs but had little effect on P4501A1/1B1) and linear furanocoumarins (e.g. imperatorin and isopimpinellin, which induced hepatic GSTs and were potent inhibitors of P4501A1/1B1) were compared. Mice were pretreated with NOCs (150 mg/kg body wt, by gavage) prior to either a single dose of DMBA (50 microg) or multiple doses of DMBA (20 microg daily for 3 and 6 weeks). Mammary DMBA-DNA adduct formation was quantitated by the nuclease P1-enhanced 32P-postlabeling assay. With the single dose of DMBA, coumarin, limettin, imperatorin and isopimpinellin inhibited DMBA-DNA adduct formation by 50, 41, 79 and 88%, respectively. Coumarin, limettin and imperatorin blocked DMBA-DNA adduct formation by 36, 60, and 66% at 3 weeks, and by 0, 49 and 55% at 6 weeks of DMBA dosing, respectively. In a 6 week dose-response study of select NOCs and 7,8-benzoflavone (a potent P4501 inhibitor that had little effect on GSTs), DMBA-DNA adduct formation was inhibited by 0, 43 and 24% in the limettin groups; by 26, 26 and 69% in the isopimpinellin groups; and by 80, 96 and 97% in the 7,8- benzoflavone groups at 35, 70 and 150 mg/kg, respectively. Taken together, these results suggest that linear furanocoumarins had a greater inhibitory effect on DMBA-DNA adduct formation in mouse mammary glands compared with simple coumarins, and that the predominant effect may be P4501 inhibition.

The intersection of the development of gestures and intentionality.

This study examined the development of deictic and representational gestures in 12 typically developing children from 6 to 24 months of age. Gestures were categorized into J. Bruner's (1981) 3 broad (and 8 specific) communicative functions: behavior regulation (i.e., requesting objects, requesting actions, protesting), joint attention (i.e., commenting, requesting information), and social interaction (i.e., representational gestures, attention seeking, social games). Ongoing parental completion of researcher-created gesture recording forms and monthly researcher observational confirmation were used to capture the emergence and consistent use of targeted gestures. Within each specific functional category, a hierarchy of development was documented for the gestures and behaviors used to signal that intent. This study provides rich detail as to the order of emergence of common deictic and representational gestures and their relationship to other preceding and concomitant behaviors that children use to signal their intentions. Furthermore, the results document younger ages of emergence, in comparison with previous studies, for most of the targeted gestures and provide insight into the controversy in the literature regarding the relative emergence of declarative and imperative gestures.