Distinct CD4+ helper T cells involved in primary and secondary responses to infection.

Helper T cells are critical for protective immunity, CD8(+) T-cell memory, and CD4(+) recall responses, but whether the same or distinct CD4(+) T cells are involved in these responses has not been established. Here we describe two CD4(+) T cells, LLO118 and LLO56, specific for an immunodominant Listeria monocytogenes epitope, with dramatically different responses to primary and secondary infection. Comparing in vivo responses, LLO118 T cells proliferate more strongly to primary infection, whereas surprisingly, LLO56 has a superior CD4(+) recall response to secondary infection. LLO118 T cells provide more robust help for CD8(+) T-cell responses to secondary infection than LLO56. We found no detectable differences in antigen sensitivity, but naive LLO118 T cells have much lower levels of CD5 and their T-cell receptor levels are dramatically down-regulated after their strong primary response. Thus, distinct CD4(+) helper T cells are specialized to help either in primary or secondary responses to infection.

Dynamics and function in a bacterial ABC transporter: simulation studies of the BtuCDF system and its components.

ABC transporters are integral membrane proteins which couple the energy of ATP hydrolysis to the translocation of solutes across cell membranes. BtuCD is a approximately 1100-residue protein found in the inner membrane of Gram-negative bacteria which transports vitamin B12. Vitamin B12 is bound in the periplasm by BtuF, which delivers the solute to the periplasmic entrance of the transporter protein complex BtuCD. Molecular dynamics simulations of the BtuCD and BtuCDF complexes (in a lipid bilayer) and of the isolated BtuD and BtuF proteins (in water) have been used to explore the conformational dynamics of this complex transport system. Overall, seven simulations have been performed, with and without bound ATP, corresponding to a total simulation time of 0.1 micros. Binding of ATP drives closure of the nucleotide-binding domains (NBDs) in BtuD in a symmetrical fashion, but not in BtuCD. It seems that ATP constrains the flexibility of the NBDs in BtuCD such that their closure may only occur upon binding of BtuF to the complex. Upon introduction of BtuF, and concomitant with NBD association, one ATP-binding site displays a closure, while the opposite site remains relatively unchanged. This asymmetry may reflect an initial step in the "alternating hydrolysis" mechanism and is consistent with measurements of nucleotide-binding stoichiometries. Principal components analysis of the simulation of BtuCD reveals motions that are comparable to those suggested in current transport models.

3-D structural and functional characterization of the purified KATP channel complex Kir6.2-SUR1.

ATP-sensitive potassium (K(ATP)) channels conduct potassium ions across cell membranes and thereby couple cellular energy metabolism to membrane electrical activity. Here, we report the heterologous expression and purification of a functionally active K(ATP) channel complex composed of pore-forming Kir6.2 and regulatory SUR1 subunits, and determination of its structure at 18 A resolution by single-particle electron microscopy. The purified channel shows ATP-ase activity similar to that of ATP-binding cassette proteins related to SUR1, and supports Rb(+) fluxes when reconstituted into liposomes. It has a compact structure, with four SUR1 subunits embracing a central Kir6.2 tetramer in both transmembrane and cytosolic domains. A cleft between adjacent SUR1s provides a route by which ATP may access its binding site on Kir6.2. The nucleotide-binding domains of adjacent SUR1 appear to interact, and form a large docking platform for cytosolic proteins. The structure, in combination with molecular modelling, suggests how SUR1 interacts with Kir6.2.

Nucleotide binding to the homodimeric MJ0796 protein: a computational study of a prokaryotic ABC transporter NBD dimer.

Transport by ABC proteins requires a cycle of ATP-driven conformational changes of the nucleotide binding domains (NBDs). We compare three molecular dynamics simulations of dimeric MJ0796: with ATP was present at both NBDs; with ATP at one NBD but ADP at the other; and without any bound ATP. In the simulation with ATP present at both NBDs, the dimeric protein interacts with the nucleotides in a symmetrical manner. However, if ADP is present at one binding site then both NBD-NBD and protein-ATP interactions are enhanced at the opposite site.

Identification of a functionally important negatively charged residue within the second catalytic site of the SUR1 nucleotide-binding domains.

The ATP-sensitive K+ channel (KATP channel) couples glucose metabolism to insulin secretion in pancreatic beta-cells. It is comprised of sulfonylurea receptor (SUR)-1 and Kir6.2 proteins. Binding of Mg nucleotides to the nucleotide-binding domains (NBDs) of SUR1 stimulates channel opening and leads to membrane hyperpolarization and inhibition of insulin secretion. To elucidate the structural basis of this regulation, we constructed a molecular model of the NBDs of SUR1, based on the crystal structures of mammalian proteins that belong to the same family of ATP-binding cassette transporter proteins. This model is a dimer in which there are two nucleotide-binding sites, each of which contains residues from NBD1 as well as from NBD2. It makes the novel prediction that residue D860 in NBD1 helps coordinate Mg nucleotides at site 2. We tested this prediction experimentally and found that, unlike wild-type channels, channels containing the SUR1-D860A mutation were not activated by MgADP in either the presence or absence of MgATP. Our model should be useful for designing experiments aimed at elucidating the relationship between the structure and function of the KATP channel.

Nucleotide-dependent conformational changes in HisP: molecular dynamics simulations of an ABC transporter nucleotide-binding domain.

ATP-binding cassette (ABC) transporters mediate the movement of molecules across cell membranes in both prokaryotes and eukaryotes. In ABC transporters, solute translocation occurs after ATP is either bound or hydrolyzed at the intracellular nucleotide-binding domains (NBDs). Molecular dynamics (MD) simulations have been employed to study the interactions of nucleotide with NBD. The results of extended (approximately 20 ns) MD simulations of HisP (total simulation time approximately 80 ns), the NBD of the histidine transporter HisQMP2J from Salmonella typhimurium, are presented. Analysis of the MD trajectories reveals conformational changes within HisP that are dependent on the presence of ATP in the binding pocket of the protein, and are sensitive to the presence/absence of Mg ions bound to the ATP. These changes are predominantly confined to the alpha-helical subdomain of HisP. Specifically there is a rotation of three alpha-helices within the subdomain, and a movement of the signature sequence toward the bound nucleotide. In addition, there is considerable conformational flexibility in a conserved glutamine-containing loop, which is situated at the interface between the alpha-helical subdomain and the F1-like subdomain. These results support the mechanism for ATP-induced conformational transitions derived from the crystal structures of other NBDs.

Molecular modeling correctly predicts the functional importance of Phe594 in transmembrane helix 11 of the multidrug resistance protein, MRP1 (ABCC1).

The human ATP-binding cassette (ABC) transporter, multidrug resistance protein 1 (MRP1/ABCC1), confers resistance to a broad range of anti-cancer agents and transports a variety of organic anions. At present, essentially no structural data exists for MRP1 that might be used to elucidate its mechanism of transport. Consequently, we have applied a modeling strategy incorporating crystal and indirect structural data from other ABC transporters to construct a model of the transmembrane domains of the core region of MRP1 that includes the amino acid side chains. Three conserved Trp residues and one non-conserved Tyr residue, shown previously to be of functional importance (Koike, K., Oleschuk, C. J., Haimeur, A., Olsen, S. L., Deeley, R. G., and Cole, S. P. C. (2002) J. Biol. Chem. 277, 49495-49503), were found to line the "pore" in our model proximal to the membrane cytosol interface. A fifth aromatic residue (Phe594) was identified that, with the Trp and Tyr residues, completed a ring or "basket" of aromatic amino acids and, accordingly, we postulated that it would also be of functional importance. To test this idea, MRP1-Phe594 mutants were expressed in human embryonic kidney cells, and their properties were examined using membrane vesicles. Substitution of Phe594 with Ala substantially reduced or eliminated the transport of five organic anion substrates by MRP1 and abrogated the binding of leukotriene C4. On the other hand, the conservatively substituted F594W and F594Y mutants remained transport competent, although significant substrate- and substitution-specific changes were observed. These studies provide some structural insight into a possible substrate binding/transport site of MRP1 at the beginning of a putative substrate translocation pathway and demonstrate the usefulness of modeling for directing structure-function analyses of this transporter.

Potassium channel regulation.

The sulphonylurea receptor (SUR) is a member of the ATP-binding cassette (ABC) family of membrane proteins. It functions as the regulatory subunit of the ATP-sensitive potassium (KATP) channel, which comprises SUR and Kir6.x proteins. Here, we review data demonstrating functional differences between the two nucleotide binding domains (NBDs) of SUR1. In addition, to explain the structural basis of these functional differences, we have constructed a molecular model of the NBD dimer of human SUR1. We discuss the experimental data in the context of this model, and show how the model can be used to design experiments aimed at elucidating the relationship between the structure and function of the KATP channel.

An atomic detail model for the human ATP binding cassette transporter P-glycoprotein derived from disulfide cross-linking and homology modeling.

The multidrug resistance P-glycoprotein mediates the extrusion of chemotherapeutic drugs from cancer cells. Characterization of the drug binding and ATPase activities of the protein have made it the paradigm ATP binding cassette (ABC) transporter. P-glycoprotein has been imaged at low resolution by electron cryo-microscopy and extensively analyzed by disulphide cross-linking, but a high resolution structure solved ab initio remains elusive. Homology models of P-glycoprotein were generated using the structure of a related prokaryotic ABC transporter, the lipid A transporter MsbA, as a template together with structural data describing the dimer interface of the nucleotide binding domains (NBDs). The first model, which maintained the NBD:transmembrane domain (TMD) interface of MsbA, did not satisfy previously published cross-linking data. This suggests that either P-glycoprotein has a very different structure from MsbA or that the published E. coli MsbA structure does not reflect a physiological state. To distinguish these alternatives, we mapped the interface between the two TMDs of P-glycoprotein experimentally by chemical cross-linking of introduced triple-cysteine residues. Based on these data, a plausible atomic model of P-glycoprotein could be generated using the MsbA template, if the TMDs of MsbA are reoriented with respect to the NBDs. This model will be important for understanding the mechanism of P-glycoprotein and other ABC transporters.

Extending the structure of an ABC transporter to atomic resolution: modeling and simulation studies of MsbA.

Molecular modeling and simulation approaches have been use to generate a complete model of the prokaryotic ABC transporter MsbA from Escherichia coli, starting from the low-resolution structure-based Calpha trace (PDB code 1JSQ). MsbA is of some biomedical interest as it is homologous to mammalian transporters such as P-glycoprotein and TAP. The quality of the MsbA model is assessed using a combination of molecular dynamics simulations and static structural analysis. These results suggest that the approach adopted for MsbA may be of general utility for generating all atom models from low-resolution crystal structures of membrane proteins. Molecular dynamics simulations of the MsbA model inserted in a fully solvated octane slab (a membrane mimetic environment) reveal that while the monomer is relatively stable, the dimer is unstable and undergoes significant conformational drift on a nanosecond time scale. This suggests that the MsbA crystal dimer may not correspond to the MsbA dimer in vivo. An alternative model of the dimer is discussed in the context of available experimental data.