Survival Analysis up to 8 Years of 304 Anatomic-Contour Implant Zirconia Crowns Fabricated with a Fully Digital Cast-Free Workflow and Directly Screwed on External Hexagonal Implant Connections without the Interposition of a Ti-Base: A Multicentric Retrospective Study.

STATEMENT OF PROBLEM: Data on the clinical performance of monolithic Zirconia screw-retained crowns on external hexagon implants fabricated from digital scans through a cast-free, fully digital workflow is lacking and needs to be included. PURPOSE: This retrospective multicentric study aimed to evaluate the real-life clinical results of monolithic Zirconia screw-retained crowns without the interposition of a Ti-base on external hexagon implants fabricated from intraoral scans and a cast-free approach in private practices. MATERIALS AND METHODS: Single external hex implant fixtures were restored with monolithic zirconia crowns without the interposition of a Tibase. The crowns were directly screwed on external hexagonal implant connections with a castfree, fully digital workflow. Data were analyzed using descriptive statistics and the Kaplan- Meier test. Between September 2022 and March 2023, the California Dental Association modified criteria were adopted for clinical evaluation after recalling all patients. RESULTS: A total of 304 single tooth restorations in the maxillary and mandibular posterior regions fabricated between July 2014 and July 2022 in 252 patients (120 males and 132 females, mean age 53.6 years, SD 23.3). Seven crowns were excluded because of patient dropout. The most common minor technical complications were screw loosening (3 crowns) and loss of the screw-access hole filling (3 crowns). Four failures included two implant failures with mobility and two fractured crowns. No screw or implant fractures were recorded. The overall cumulative survival rate was 98.6% and the average success rate (crowns experiencing no failures or complications) was 96.0%. The mean overall survival time was 101.3 months (standard error, 0.847; 95% confidence interval for the mean, 99.67-102.99). The overall survival probability was 87.9% up to 97 months. CONCLUSIONS: With careful case selection and comprehensive periodontal maintenance program, single crowns directly screwed onto an external hexagon platform have shown to have excellent survival and success (complication-free) rates, comparable to available data regarding single crowns with a metal implant- prosthetic interface.

Grazing system and Hyalomma marginatum tick infestation in cattle with high prevalence of SFG Rickettsia spp.

Tick-borne diseases (TBDs) represent a significant portion of infectious diseases of global public health interest. In Italy, knowledge about the occurrence of tick-borne pathogens (TBPs) in ticks parasitizing cattle is scarce. In this research, we focused on ticks infesting Maremmana cattle grazing in open pasture and silvopasture systems. After being morphologically identified, ticks were molecularly tested for the presence of pathogens of the genus Rickettsia. Of the 794 ticks detected, 117 were collected, being the majority Hyalomma marginatum (72.6%), followed by other Hyalomma species (23%), Rhipicephalus turanicus (1.7%), Rh. bursa (0.9%), Hy. lusitanicum (0.9%) and Dermatocentor marginatus (0.9%). All ticks were adults, 58.1% males and 41.8% females. The highest tick prevalence was noted in April for silvopasture system cattle (90%), and in May for open pasture ones (85%). TBPs were detected only in Hy. marginatum, and all belong to Rickettsia spp. of zoonotic interest. In particular, 21/40 (52.5%) ticks scored positive for Rickettsia spp. by gltA gene and of these 15/21 (71.4%) also to spotted fever group (SFG) rickettsiae by ompA gene. Of the total positive specimens, 19 were successfully sequenced and scored Rickettsia aeschilimannii (17/19, 89.5%), R. slovaca (1/19, 5%), and R. massiliae (1/19, 5%). This research highlights the potential impact of grazing systems on cattle parasitization by hard ticks. The molecular investigation of TBPs in ticks collected from Maremmana cattle shed light on the presence of pathogenic bacteria of SFG Rickettsia spp., pointing out the potential risk of TBPs transmission between livestock and humans.

Automated image-based analysis unveils acute effects due to sub-lethal pesticide doses exposure.

Pesticides are still abused in modern agriculture. The effects of their exposure to even sub-lethal doses can be detrimental to ecosystem stability and human health. This work aims to validate the use of machine learning techniques for recognizing motor abnormalities and to assess any effect post-exposure to a minimal dosage of these substances on a model organism, gaining insights into potential risks for human health. The test subject was the Mediterranean fruit fly, Ceratitis capitata (Wiedemann) (Diptera: Tephritidae), exposed to food contaminated with the LC30 of Carlina acaulis essential oil. A deep learning approach enabled the pose estimation within an arena. Statistical analysis highlighted the most significant features between treated and untreated groups. Based on this analysis, two learning-based algorithms, Random Forest (RF) and XGBoost were employed. The results were compared through different metrics. RF algorithm generated a model capable of distinguishing treated subjects with an area under the receiver operating characteristic curve of 0.75 and an accuracy of 0.71. Through an image-based analysis, this study revealed acute effects due to minimal pesticide doses. So, even small amounts of these biocides drifted far from distribution areas may negatively affect the environment and humans.

Learning algorithms estimate pose and detect motor anomalies in flies exposed to minimal doses of a toxicant.

Pesticide exposure, even at low doses, can have detrimental effects on ecosystems. This study aimed at validating the use of machine learning for recognizing motor anomalies, produced by minimal insecticide exposure on a model insect species. The Mediterranean fruit fly, Ceratitis capitata (Diptera: Tephritidae), was exposed to food contaminated with low concentrations of Carlina acaulis essential oil (EO). A deep learning approach enabled fly pose estimation on video recordings in a custom-built arena. Five machine learning algorithms were trained on handcrafted features, extracted from the predicted pose, to distinguish treated individuals. Random Forest and K-Nearest Neighbor algorithms best performed, with an area under the receiver operating characteristic (ROC) curve of 0.75 and 0.73, respectively. Both algorithms achieved an accuracy of 0.71. Results show the machine learning potential for detecting sublethal effects arising from insecticide exposure on fly motor behavior, which could also affect other organisms and environmental health.

Being exposed to low concentrations of pirimiphos-methyl and chlorfenapyr has detrimental effects on the mobility of Trogoderma granarium.

BACKGROUND: Sublethal effects of insecticides may negatively affect several biological and behavioral traits of insects. The lethal effects of pirimiphos-methyl and chlorfenapyr have been previously showed on Trogoderma granarium, but little knowledge is available about their sublethal effects at low concentrations on both sexes. Herein, the sublethal effects of pirimiphos-methyl and chlorfenapyr on the mobility of T. granarium males and females were investigated. RESULTS: Lethal concentration (LC) values of pirimiphos-methyl and chlorfenapyr were lower for T. granarium females than males. LC values on males were LC10 = 0.000788 and 0.00139 mg active ingredient (a.i.) cm-2 , LC30 = 0.00350 and 0.00535 mg a.i. cm-2 , and LC50 = 0.00986 and 0.0136 mg a.i. cm-2 for pirimiphos-methyl and chlorfenapyr respectively. LC on females were LC10 = 0.000704 and 0.00110 mg a.i. cm-2 , LC30 = 0.00323 and 0.00428 mg a.i. cm-2 , and LC50 = 0.00925 and 0.0110 mg a.i. cm-2 for pirimiphos-methyl and chlorfenapyr respectively. The walking duration of beetles exposed to LC30 of pirimiphos-methyl was significantly lower than the individuals exposed to LC10 and LC30 of both insecticides and control ones. Pirimiphos-methyl LC30 -exposed males remained more time on their back (101.7 s) than females (46.9 s), while the latter stayed immobile longer than males (381.7 s versus 371.9 s). The highest speed was recorded for control beetles (14.17 mm s-1 females vs. 12.44 mm s-1 males), while the lowest speed was observed in pirimiphos-methyl LC30 -treated males (8.36 mm s-1 ) and females (9.66 mm s-1 ). CONCLUSIONS: Overall, males and females exposed to low concentrations of pirimiphos-methyl and chlorfenapyr showed reduced motility. This knowledge can be exploited further to unlock behavioral effects of insecticides for effective pest management programs in warehouses. © 2023 Society of Chemical Industry.

Acmella oleracea extracts as green pesticides against eight arthropods attacking stored products.

Developing sustainable control tools for managing noxious pests attacking stored foodstuffs is a timely research challenge. Acmella oleracea (L.) R. K. Jansen is a crop widely cultivated for its multiple usages on an industrial level. In this study, the extracts prepared with A. oleracea aerial parts were applied on wheat kernels for the management of eight important arthropod pests attacking stored products, i.e., Cryptolestes ferrugineus, Tenebrio molitor, Oryzaephilus surinamensis, Trogoderma granarium, Tribolium castaneum, Tribolium confusum, Alphitobius diaperinus (adults/larvae), and Acarus siro (adults/nymphs). Extraction of A. oleracea was optimized on the base of the yield and content of spilanthol and other N-alkylamides which were analysed by HPLC-DAD-MS. Two concentrations of n-hexane or methanol extracts (500 ppm and 1000 ppm), obtained through Soxhlet extraction, were tested to acquire mortality data on the above-mentioned pests after 4, 8, and 16 h and 1 to 7 days of exposure. Both extracts achieved complete mortality (100.0%) of C. ferrugineus adults. In the case of A. diaperinus adults, mortalities were very low at any concentrations of both extracts. In general, the n-hexane extract was more efficient than methanol extract against almost all species and stages. Considering both extracts, the susceptibility order, from most to least susceptible species/stage, was C. ferrugineus adults > A. diaperinus larvae > C. ferrugineus larvae > T. granarium adults > T. molitor larvae > O. surinamensis adults > O. surinamensis larvae > T. confusum larvae > T. castaneum larvae > A. siro adults > T. molitor adults > A. siro nymphs > T. granarium larvae > T. castaneum adults > T. confusum adults > A. diaperinus adults. Our research provides useful knowledge on the efficacy of N-alkylamides-rich A. oleracea extracts as grain protectants, pointing out the importance of targeting the most susceptible species/ developmental stages.

Keep Your Eggs Away: Ant Presence Reduces Ceratitis capitata Oviposition Behaviour through Trait-Mediated Indirect Interactions.

Alternative methods to achieve sustainable agricultural production while reducing the use of chemical pesticides, such as biological control, are increasingly needed. The exploitation of trait-mediated indirect interactions (TMIIs), in which pests modify their behavior in response to some cues (e.g., pheromones and other semiochemicals) to avoid predation risk, may be a possible strategy. In this study, we tested the effect of TMIIs of two Mediterranean ant species, Crematogaster scutellaris and Tapinoma nigerrimum, on the oviposition behaviour of Ceratitis capitata (Diptera: Tephritidae), one of the world's most economically damaging pests, which attacks fruits. For each ant species, we performed choice experiments using ant-scented and control plums, counting the time spent by medflies on fruits and the number of pupae emerging from them. Results of both ant species tests showed a significantly shorter time spent by ovipositing medflies on ant-exposed plums and a lower number of pupae, when compared to the control group. Our findings highlighted that the semiochemicals released by ants on plums triggered an avoidance behaviour by medfly females, leading to lower oviposition rates. This study contributes to the understanding of indirect ant-pest interactions in Mediterranean agricultural settings and points out the potential of utilising ant-borne semiochemicals in sustainable IPM strategies.

Efficacy of Mentha aquatica L. Essential Oil (Linalool/Linalool Acetate Chemotype) against Insect Vectors and Agricultural Pests.

In recent years, agrochemical industries have been focused on the development of essential oil (EO)-based biopesticides, which can be considered valuable alternatives to traditional chemical products. The genus Mentha (Lamiaceae) comprises 30 species characterized by a wide range of biological activities, and some of their EOs showed good potential as pesticidal agents. In this regard, the aim of this study was to evaluate the insecticidal activity of the EO obtained from a rare linalool/linalool acetate chemotype of Mentha aquatica L. The EO was found to be highly effective against Culex quinquefasciatus (Say) 2nd instar larvae, Metopolophium dirhodum (Walker) adults, Spodoptera littoralis (Boisduval) 2nd instar larvae, and Tetranychus urticae (Koch) adults, showing lethal concentrations (LC50) or doses (LD50) of 31.5 ± 2.2 µL L-1, 4.9 ± 0.8 mL L-1, 18.5 ± 2.1 µg larvae-1, and 3.3 ± 0.5 mL L-1, respectively. On the contrary, Musca domestica L. adults and 3rd instar larvae of C. quinquefasciatus and S. littoralis were moderately affected by the treatment (LC50 or LD50: 71.4 ± 7.2 µg adult-1, 79.4 ± 5.2 µL L-1, 44.2 ± 5.8 µg larvae-1, respectively). The results obtained in this work demonstrated that various insects and pests could be differently sensible to the same EO and may lead to the exploitation of this plant or its major volatile compounds as novel ingredients of botanical insecticides and pesticides.

A digital protocol for the fabrication of anatomic-contour implant zirconia crowns directly screwed on external hexagonal implant connections without the interposition of a Ti-base component.

A straightforward and effective restorative option is proposed for implant-supported fixed prostheses with external connections by using monolithic zirconia without the interposition of a Ti-base component. The technique is based on a modification of the Brånemark connection used to link metal-ceramic or metal-composite resin restorations directly to the implant.

Do changes in Lactuca sativa metabolic performance, induced by mycorrhizal symbionts and leaf UV-B irradiation, play a role towards tolerance to a polyphagous insect pest?

The increased ultraviolet radiation (UV) due to the altered stratospheric ozone leads to multiple plant physiological and biochemical adaptations, likely affecting their interaction with other organisms, such as pests and pathogens. Arbuscular mycorrhizal fungi (AMF) and UV-B treatment can be used as eco-friendly techniques to protect crops from pests by activating plant mechanisms of resistance. In this study, we investigated plant (Lactuca sativa) response to UV-B exposure and Funneliformis mosseae (IMA1) inoculation as well as the role of a major insect pest, Spodoptera littoralis. Lettuce plants exposed to UV-B were heavier and taller than non-irradiated ones. A considerable enrichment in phenolic, flavonoid, anthocyanin, and carotenoid contents and antioxidant capacity, along with redder and more homogenous leaf color, were also observed in UV-B-treated but not in AMF-inoculated plants. Biometric and biochemical data did not differ between AMF and non-AMF plants. AMF-inoculated plants showed hyphae, arbuscules, vesicles, and spores in their roots. AMF colonization levels were not affected by UV-B irradiation. No changes in S. littoralis-feeding behavior towards treated and untreated plants were observed, suggesting the ability of this generalist herbivore to overcome the plant chemical defenses boosted by UV-B exposure. The results of this multi-factorial study shed light on how polyphagous insect pests can cope with multiple plant physiological and biochemical adaptations following biotic and abiotic preconditioning.

The Type of Grain Counts: Effectiveness of Three Essential Oil-Based Nanoemulsions against Sitophilus oryzae.

Essential oil (EO)-based nanoemulsions (NEs) are promising grain protectants in the management of stored-product pests. However, the potential impact of the stored-grain species on the green insecticide effectiveness has been poorly studied. In this study, two concentrations of EO-based NEs from Carlina acaulis L., Mentha longifolia (L.) Huds., and Hazomalania voyronii (Jum.) Capuron were evaluated as insecticides against the major stored-product pest Sitophilus oryzae (L.) on barley, oats, and maize kernels. The C. acaulis EO-based NE applied at 1000 ppm on barley achieved the highest mortality, killing 94.4% of S. oryzae adults after a 7-day exposure, followed by 1000 ppm of H. voyronii EO-based NE (83.3%). The lowest mortality (1.1%) was recorded with 500 ppm of M. longifolia EO-based NE on maize after the same interval. All tested NEs exhibited elevated efficacy when applied on barley, while mortalities were lower on oats and maize. Furthermore, C. acaulis EO-based NE was the most effective when applied on all commodities, followed by H. voyronii and M. longifolia EO-based NEs. Overall, our results highlighted the significant impact of the stored cereal on the insecticidal effectiveness of EO-based NE used for stored-product pest control. Sitophilus oryzae adults on barley can be adequately controlled through the application of C. acaulis and H. voyronii EO-based NEs.

A diagnostically and digitally driven tooth preparation protocol by using a patient monitoring tool with an intraoral scanner.

Finding the right balance between the preservation of tooth structure and providing adequate space for the restorative material is a major challenge in prosthetic dentistry. A technique is presented using the patient monitoring tool available in standard software programs of an intraoral scanner to constantly monitor preparation dimensions in relation to the optimal definitive restoration.

Survival analysis up to 7 years of 621 zirconia monolithic single crowns with feather-edge margins fabricated with a cast-free workflow starting from intraoral scans: A multicentric retrospective study.

STATEMENT OF PROBLEM: Clinical studies on the fabrication of monolithic zirconia restorations with a feather-edge tooth preparation from digital scans and a cast-free fully digital workflow are lacking. PURPOSE: The purpose of this retrospective multicentric study in private practices was to evaluate the outcomes of monolithic zirconia crowns fabricated with feather-edge margins and a cast-free approach. MATERIAL AND METHODS: A total of 621 teeth were prepared with feather-edge margins and restored with monolithic zirconia crowns fabricated with a fully digital cast-free workflow. Data were analyzed by using the Kaplan-Meier test and descriptive statistics. The clinical evaluation adopted the California Dental Association-modified criteria after recalling all patients between April and July 2021. RESULTS: The clinical survival of 619 of 621 crowns, including recemented crowns placed in 427 patients (217 men, 220 women) over 5 years (2014 to 2019 with crowns in service between 12 and 85 months), was analyzed. The 2 excluded crowns were delivered to patients who dropped out of the study. Of the 619 crowns, 5 failed during the follow-up period: 4 teeth were extracted because of fracture and 1 restoration fractured. No other technical or biological failures were observed. The mean overall survival time was 84.4 months (standard error, 0.255; 95% confidence interval for the mean, 83.92 to 84.92). The overall survival probability was 99.1% up to 85 months. CONCLUSIONS: The clinical outcomes of the monolithic zirconia crowns with feather-edge margins evaluated were comparable with outcomes reported using other margin designs and materials.

A modified scan technique for multiple abutment teeth using the trim and lock function.

OBJECTIVES: To describe a new protocol for digital scanning of multiple abutment teeth using the trim and lock software tools. METHODS: A reverse workflow technique was used. Scanning was performed with the interim restoration in position. The abutment teeth were then trimmed from the scan. The retraction cord or interim restoration from either the first mesial or distal abutment tooth was removed and only that tooth was scanned, allowing the dentist to easily manage gingival displacement and keep the tooth dry from crevicular fluid and saliva. Consequently, the preparation margin remained visible and uncontaminated during the scan. The adjacent abutment teeth detected in the scan were deleted from it, and the scan was then locked using a tool of the scanning software. Next, the retraction cord or interim restoration of the next abutment tooth was removed, and only that tooth was scanned. The procedure was repeated until all prepared teeth were individually scanned. RESULTS: The technique presented here facilitated the scanning of multiple abutment teeth in a simple and predictable way by utilizing the trim and lock surface tools of the scanning software and helped in avoiding closure of the gingival crevice. CONCLUSIONS: Splitting the scan for a complex case with multiple abutment teeth allows reliable 3D acquisition of the finish line of each abutment tooth. Therefore, this technique simplifies the full-arch intraoral scanning process and can improve treatment efficiency. CLINICAL SIGNIFICANCE: The trim and lock tool allows scanning of each prepared abutment tooth separately, transforming a full-arch impression into multiple single scans. This technique helps to easily manage gingival displacement and maintain an uncontaminated and dry preparation margin during the scan.

Functional Asymmetries Routing the Mating Behavior of the Rusty Grain Beetle, Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae).

The rusty grain beetle, Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae), is a serious secondary pest of stored and processed food commodities. In the present study, we investigated the lateralization of males during courtship and mating, attempting to understand if it can be linked with a high likelihood of successful copulation. Most males exhibited left-biased (41%) approaches towards females, and turned 180° to their left, with 37% mating success. Right-biased males (i.e., approaching from the right and then turning 180°) were fewer than left-biased ones; 26% out of 34% managed to copulate with females. Only 9% out of 13% and 7% out of 11% of the back side- and front side-approaching males succeeded in mating, respectively. Directional asymmetries in approaching a potential mate, as well as the laterality of side-biased turning 180°, significantly affected male copulation success, with left-biased males achieving higher mating success if compared to right-biased males. Copula duration was significantly lower for left-biased-approaching males (1668.0 s) over the others (i.e., 1808.1, 1767.9 and 1746.9 for right-biased, front and back side-males, respectively). Left-biased males performed shorter copulation attempts and copula compared to right-biased males. Overall, our study adds basic knowledge to the lateralized behavioral displays during courtship and copula of C. ferrugineus.

Acaricidal Activity of Bufadienolides Isolated from Drimia pancration against Tetranychus urticae, and Structural Elucidation of Arenobufagin-3-O-α-L-rhamnopyranoside.

Chemical characterization of the bulbs of Drimia pancration was conducted to isolate four steroidal saponins (1-4). Earlier, we focused on the structural elucidation of compounds 1-3. Herein, by means of 1H-NMR, 13C-NMR, Nuclear Overhauser Effects (NOE), and 2D-NMR spectra, the full stereochemical structure of 4 is reported, and all the 1H and 13C signals are assigned. Compounds 1-4 were tested for their acaricidal properties against the two-spotted spider mite Tetranychus urticae. Our results showed excellent activity of compound 1, with an LD50 (µg/cm2) of 0.29 and a LD90 (µg/cm2) of 0.96, whereas compounds 2, 3, and 4 showed moderate activity. Furthermore, the acaricidal and cytotoxic properties of the crude extract were also investigated. Of note, after 96 h of exposure, the acaricidal activity of compound 1 was higher than that of the positive control, hexythiazox. Indeed, for compound 1, LD50 and LD90 were 0.29 and 0.96 µg/cm2, respectively, while hexythiazox LD50(90) was 18.7 (132.5) µg/cm2. Additionally, D. pancration extract, after 72 h, induced a high cytotoxic effect in HaCaT and THP-1 cell lines, with an IC50 of 7.37 ± 0.5 µg/mL and 3.50 ± 0.15 µg/mL, respectively. Overall, D. pancration can be considered as a green source of novel acaricides effective against mites of agricultural importance, such as T. urticae, pending proper field validation and the assessment of non-target effects on other invertebrate species.

Carlina acaulis essential oil nanoemulsion as a new grain protectant against different developmental stages of three stored-product beetles.

BACKGROUND: Plant essential oils (EOs) represent eco-friendly alternatives to conventional insecticides for managing pest populations. Carlina acaulis root EO showed a wide insecticidal spectrum, being highly effective against insect pests and vectors, coupled with low mammal toxicity. To boost the chemico-physical properties of this EO and its main active ingredient, carlina oxide, C. acaulis EO was encapsulated in a nanoemulsion [NE, 6% EO (w/w)], and its insecticidal properties evaluated against larvae and adults of Tribolium castaneum, Tribolium confusum and Tenebrio molitor. Two NE concentrations (500 and 1000 ppm) were applied on stored wheat. Mortality was determined after 4, 8 and 16 h and 1, 2, 3, 4, 5, 6 and 7 days. RESULTS: The NE was toxic to larvae of T. castaneum and T. confusum, killing 93.9% and 98.9% at 1000 ppm after 7 days of exposure, respectively. Tenebrio molitor larvae were tolerant: only 18.9% were dead after 7 days of exposure on stored wheat treated with 1000 ppm NE. However, the NE exhibited high adulticidal activity leading to 85.2% mortality at 1000 ppm, 7 days post-exposure. The mortalities of T. confusum and T. castaneum adults were low (21.4% and 23.3% respectively) at 1000 ppm, 7 days post-exposure. CONCLUSIONS: A NE based on C. acaulis EO could be regarded as an efficacious green adulticide or larvicide, depending on the target insect species and its life stage, advancing and specifying the pest management strategies of the tested species in an eco-friendly way. © 2022 Society of Chemical Industry.

Lethal and behavioural effects of a green insecticide against an invasive polyphagous fruit fly pest and its safety to mammals.

Plant essential oil-based insecticides, with special reference to those that may be obtained from largely available biomasses, represent a valuable tool for Integrated Pest Management. However, the sublethal effects and the potential effects on aggressive insect traits of these green insecticides are understudied. Herein, the lethal and sub-lethal effects of the carlina oxide, constituting more than 97% of the whole Carlina acaulis (Asteraceae) root essential oil (EO), were determined against an invasive polyphagous tephritid pest, Ceratitis capitata (medfly). The carlina oxide was formulated in a mucilaginous solution containing carboxymethylcellulose sodium salt, sucrose, and hydrolysed proteins, showing high ingestion toxicity on medfly adults. The behavioural effects of carlina oxide at LC10 and LC30 were evaluated on the medfly aggressive traits, which are crucial for securing reproductive success in both sexes. Insecticide exposure affected the directionality of aggressive actions, but not the aggression escalation intensity and duration. The EO safety to mammals was investigated by studying its acute toxicity on the stomach, liver, and kidney of rats after oral administration. Only the highest dose (1000 mg/kg) of the EO caused modest neurological signs and moderate effects on the stomach, liver, and kidney. The other doses, which are closer to the practical use of the EO when formulated in protein baits, did not cause side effects. Overall, C. acaulis-based products are effective and safe to non-target mammals, deserving further consideration for eco-friendly pesticide formulations.

Leaf UV-B Irradiation and Mycorrhizal Symbionts Affect Lettuce VOC Emissions and Defence Mechanisms, but Not Aphid Feeding Preferences.

Arbuscular mycorrhizal fungi (AMF) and ultraviolet-B radiation (UV-B) play important roles in plant-insect interactions by altering plant physiology and histology. We hypothesized that UV-B-induced oxidative stress was mitigated by AMF symbiosis. In this study, we conducted a multifactorial experiment to explore lettuce plant response to AMF inoculation and UV-B exposure (0.4 W m-2; 16 h d-1; 2 weeks), either together or individually, as well as the interaction with the polyphagous insect pest Myzus persicae (Sulzer). Lettuce plants subjected to UV-B radiation showed an increase in callose and oxidative stress indicators, as well as a decrease in stomatal density. Mycorrhizal colonization cancelled out the effect of UV-B on stomatal density, while the symbiosis was not affected by UV-B treatment. The plant volatile emission was significantly altered by UV-B treatment. Specifically, the non-terpene 1-undecene abundance (+M/+UVB: 48.0 ± 7.78%; -M/+UVB: 56.6 ± 14.90%) was increased, whereas the content of the non-terpene aldehydes decanal (+M/+UVB: 8.50 ± 3.90%; -M/+UVB: 8.0 ± 4.87%) and undecanal (+M/+UVB: 2.1 ± 0.65%; -M/+UVB: 1.20 ± 1.18%) and the sesquiterpene hydrocarbons (+M/+UVB: 18.0 ± 9.62 %; -M/+UVB: 19.2 ± 5.90%) was decreased. Mycorrhization, on the other hand, had no significant effect on the plant volatilome, regardless of UV-B treatment. Aphid population was unaffected by any of the treatments, implying a neutral plant response. Overall, this study provides new insights about the interactions among plants, UV-B, and AMF, outlining their limited impact on a polyphagous insect pest.

Diatomaceous Earth for Arthropod Pest Control: Back to the Future.

Nowadays, we are tackling various issues related to the overuse of synthetic insecticides. Growing concerns about biodiversity, animal and human welfare, and food security are pushing agriculture toward a more sustainable approach, and research is moving in this direction, looking for environmentally friendly alternatives to be adopted in Integrated Pest Management (IPM) protocols. In this regard, inert dusts, especially diatomaceous earths (DEs), hold a significant promise to prevent and control a wide range of arthropod pests. DEs are a type of naturally occurring soft siliceous sedimentary rock, consisting of the fossilized exoskeleton of unicellular algae, which are called diatoms. Mainly adopted for the control of stored product pests, DEs have found also their use against some household insects living in a dry environment, such as bed bugs, or insects of agricultural interest. In this article, we reported a comprehensive review of the use of DEs against different arthropod pest taxa, such as Acarina, Blattodea, Coleoptera, Diptera, Hemiptera, Hymenoptera, Ixodida, Lepidoptera, when applied either alone or in combination with other techniques. The mechanisms of action of DEs, their real-world applications, and challenges related to their adoption in IPM programs are critically reported.