Biosorption of uranium from aqueous solutions by Azolla sp. and Limnobium laevigatum.

The main goal of this study was to assess alternatives to the current challenges on environmental quality and circular economy. The former is here addressed by the treatment of radioactively contaminated solutions, and the latter by using abundant and low-cost biomass. In this paper, we examine the biosorption of hexavalent uranium (U(VI)) in a batch system using the macrophytes Limnobium laevigatum and Azolla sp. by three operational parameters: biomass dose, metal ion concentration, and contact time. Simulated solutions were firstly addressed with two biomasses, followed by studies with real liquid organic radioactive waste (LORW) with Azolla sp. The batch experiments were carried out by mixing 0.20 g biomass in 10 mL of the prepared solution or LORW. The total contact time employed for the determination of the equilibrium times was 240 min, and the initial U(VI) concentration was 0.63 mmol L-1. The equilibrium times were 15 min for L. laevigatum and 30 min for Azolla sp. respectively. A wide range of initial U(VI) concentrations (0.25-36 mmol L-1) was then used to assess the adsorption capacity of each macrophyte. Isotherm models validated the adsorption performance of the biosorption process. Azolla sp. presented a much higher U(VI) uptake (0.474 mmol g-1) compared to L. laevigatum (0.026 mmol g-1). When in contact with LORW, Azolla sp. removed much less uranium, indicating an adsorption capacity of 0.010 mmol g-1. In conclusion, both biomasses, especially Azolla sp., can be used in the treatment of uranium-contaminated solutions.

Comprehensive Analysis of Hierarchical Porous Carbons Using a Dual-Shape 2D-NLDFT Model with an Adjustable Slit-Cylinder Pore Shape Boundary.

A thorough characterization of the textural properties of hierarchical porous carbons (HPCs) is of utmost importance as it provides information that aids in the selection of a suitable material for a given application and in understanding the phenomena observed once the material becomes part of a system. Gas adsorption-desorption isotherms coupled with the application of density functional theory (DFT) models to these isotherms are common tools for the textural characterization of HPCs, for which pore shape is an essential factor for the determination of pore size distributions (PSDs). By analyzing the experimental adsorption data of a series of CO2-activated HPCs with a progressive development of porosity, it is shown that artifacts are found in the derived PSDs when a slit-cylinder pore shape boundary is fixed at 2 nm, which is the case for the original dual-shape nonlocal DFT (2D-NLDFT-HS) and hybrid quenched solid DFT (QSDFT) models. This study presents a new dual-shape 2D-NLDFT-HS (DS-HS) model that, combined with the 2D-NLDFT-HS model for CO2, provides the possibility of analyzing simultaneously N2 and CO2 adsorption-desorption isotherms and adjusting at the same time the limits for the assumed slit and cylindrical pore shapes. Using the DS-HS approach and adjusting the slit-cylinder boundary at 3 nm allowed eliminating PSDs artifacts. The interactive adjustment of the slit-cylindrical pore shape boundary of the DS-HS model represents a major advantage of this approach allowing for a comprehensive analysis of the adsorption data and a more accurate description of the textural properties of HPC materials.

Novel Porous Carbon Material for the Detection of Traces of Volatile Organic Compounds in Indoor Air.

A highly sensitive and selective silicon-based microanalytical prototype was used to identify a few ppb of volatile organic compounds (VOCs) in indoor air. Herein, a new nonactivated tannin-derived carbon synthesized by an environmentally friendly method, DM2C, a MIL-101(Cr) MOF, and a DaY zeolite were selected for the preconcentration of BTEX compounds (i.e., benzene, toluene, ethylbenzene, and xylenes). Integrating a small amount of these nanoporous solids inside a miniaturized preconcentration unit led to excellent preconcentration performance. By taking advantage of the high adsorption-desorption capacities of the DM2C adsorbent, concentrations as low as 23.5, 30.8, 16.7, 25, and 28.8 ppb of benzene, toluene, ethylbenzene, ortho- and para-xylene, respectively, were detected in a short analysis time (∼10 min) even in the presence of 60% relative humidity at 25 °C. The DM2C showed excellent stability over a period of 4 months and more than 500 tests, as well as repeatability, which makes it a very reliable adsorbent for the detection of trace VOCs in indoor air under realistic conditions in the presence of humidity.

Use of calcium alginate beads and Saccharomyces cerevisiae for biosorption of 241Am.

Calcium alginate beads, inactivated Saccharomyces cerevisiae and inactivated S. cerevisiae immobilized in calcium alginate beads (S. cerevisiae-calcium alginate beads) are examined as potential biosorption materials as regards their capacity to remove 241Am. In this study, initial experiments were carried out to evaluate the effects of pH (2 and 4) and 241Am initial concentration: 75, 150, and 300 Bq mL-1. The experiments were conducted in a batch reactor. Higher removal capacity was observed at pH 2 with the use of S. Cerevisiae, whereas pH 4 performed better for the essays with calcium alginate beads and S. Cerevisiae-calcium alginate beads. The pseudo-first-order kinetic model described the kinetics of biosorption. Calcium alginate was the adsorbent of choice to further experiments with synthetic organic liquid waste. A lower removal rate was observed in the organic waste, although calcium alginate beads have also been able to achieve high sorption capacity in less than 4 h. With the organic waste, the highest value of sorption capacity of 241Am was 4.38 × 10-7 mmol g-1 with an initial 241Am concentration of 2.31 × 10-8 mmol L-1.

The use of rice and coffee husks for biosorption of U (total), 241Am, and 137Cs in radioactive liquid organic waste.

Rice and coffee husks (raw and chemically activated) are examined as potential biosorption materials regarding their capacity to remove U (total), 241Am, and 137Cs. The physical parameters evaluated were the morphological characteristics of the biomass, real and apparent density, and surface area. Contact times for the batch experiments were 0.5, 1, 2, and 4 h, and the concentrations tested ranged between 10% of the total concentration and the radioactive waste itself without any dilution. The results were evaluated by experimental sorption capacity, ternary isotherm, and kinetics models. The kinetics results showed that equilibrium was reached after 2 h for all biomass. Raw coffee husk showed the best adsorption results in terms of maximum capacity (qmax) for all three radionuclides, which were 1.96, 39.4 × 10-6, and 46.6 × 10-9 mg g-1 for U, Am, and Cs, respectively. The biosorption process for the raw and activated rice husks was best represented by the Langmuir ternary isotherm model with two sites. For the coffee husk, in the raw and activated states, the biosorption process was best described by the modified Jain and Snoeyink ternary model. These results suggest that biosorption with these biomaterials can be applied in the treatment of liquid organic radioactive waste containing mainly uranium and americium.

Uranium biosorption by Lemna sp. and Pistia stratiotes.

Biosorption-based technologies have been proposed for the removal of radionuclides from radioactive liquid waste containing organic compounds. Nevertheless, pytoremediation potential of uranium (U) by nonliving aquatic macrophytes Lemna sp. and Pistia stratiotes has not been previously addressed. In this study, uranium biosorption capacity by Pistia stratiotes and Lemna sp. was evaluated by equilibrium and kinetics experiments. The biomasses were added to synthetic and real waste solutions. The assays were tested in polypropylene vials containing 10 mL of uranium nitrate solution and 0.20 g of biomass. Solutions ranging from 0.25 to 84.03 mmol l-1 were employed for the assessment of uranium concentration in each macrophyte. The equilibrium time was 1 h for both macrophytes. Lemna sp. achieved the highest sorption capacity with the use of the synthetic solution, which was 0.68 mmol g-1 for the macrophyte. Since Lemna sp. exhibit a much higher adsorption capacity, only this biomass was exposed to the actual waste solution, being able to adsorb 9.24 × 10-3 mmol g-1 U (total). The results show that these materials are potentially applicable to the treatment of liquid radioactive waste.