Antibacterial Action of Zn2+ Ions Driven by the In Vivo Formed ZnO Nanoparticles.

Antibacterial formulations based on zinc oxide nanoparticles (ZnO NPs) are widely used for antibiotic replacement in veterinary medicine and animal nutrition. However, the undesired environmental impact of ZnO NPs triggers a search for alternative, environmentally safer solutions. Here, we show that Zn2+ in its ionic form is a more eco-friendly antibacterial, and its biocidal action rivals that of ZnO NPs (<100 nm size), with a minimal biocidal concentration being 41(82) µg mL-1 vs 5 µg mL-1 of ZnO NPs, as determined for 103(106) CFU mL-1 E. coli. We demonstrate that the biocidal activity of Zn2+ ions is primarily associated with their uptake by E. coli and spontaneous in vivo transformation into insoluble ZnO nanocomposites at an internal bacterial pH of 7.7. Formed in vivo nanocomposite then damages E. coli membrane and intracellular components from the inside, by forming insoluble biocomposites, whose formation can also trigger ZnO characteristic reactions damaging the cells (e.g., by generation of high-potential reactive oxygen species). Our study defines a special route in which Zn2+ metal ions induce the death of bacterial cells, which might be common to other metal ions capable of forming semiconductor oxides and insoluble hydroxides at a slightly alkaline intracellular pH of some bacteria.

Antimicrobial effects of silver nanoparticle-microspots on the mechanical properties of single bacteria.

Silver nanoparticles (AgNPs) conjugated with polymers are well-known for their powerful and effective antimicrobial properties. In particular, the incorporation of AgNPs in biocompatible catecholamine-based polymers, such as polydopamine (PDA), has recently shown promising antimicrobial activity, due to the synergistic effects of the AgNPs, silver(I) ions released and PDA. In this study, we generated AgNPs-PDA-patterned surfaces by localised electrochemical depositions, using a double potentiostatic method via scanning electrochemical cell microscopy (SECCM). This technique enabled the assessment of a wide parameter space in a high-throughput manner. The optimised electrodeposition process resulted in stable and homogeneously distributed AgNP-microspots, and their antimicrobial activity against Escherichia coli was assessed using atomic force microscopy (AFM)-based force spectroscopy, in terms of bacterial adhesion and cell elasticity. We observed that the bacterial outer membrane underwent significant structural changes, when in close proximity to the AgNPs, namely increased hydrophilicity and stiffness loss. The spatially varied antimicrobial effect found experimentally was rationalised by numerical simulations of silver(I) concentration profiles.

Thin-Film Waveguide Laser Spectroscopy: A Novel Platform for Bacterial Analysis.

Bacterial sensing based on quantum cascade laser spectroscopy coupled with diamond or gallium arsenide thin-film waveguides is a novel analytical tool for gaining high-resolution infrared spectroscopic information of planktonic and sessile bacteria, as shown in the present study for Escherichia coli. During observation periods of up to 24 h, diamond and gallium arsenide thin-film waveguide laser spectroscopy was compared to information obtained via conventional Fourier transform infrared spectroscopy. The proliferation behavior of E. coli at those surfaces was complementarily investigated using atomic force microscopy and scanning electron microscopy.

Graphene-enhanced quantum cascade laser infrared spectroscopy using diamond thin-film waveguides.

Diamond thin-film waveguides were combined with quantum cascade lasers augmented by drop-casted graphene enabling surface-enhanced infrared absorption spectroscopy. Enhancing the signal provides access to an even more pronounced vibrational signature suitable for analytical scenarios where only a small sample volume and/or low analyte concentration levels are prevalent. To demonstrate the utility of this concept, taurine was investigated as a model analyte.

Espresso Science: Laser-Based Diamond Thin-Film Waveguide Sensors for the Quantification of Caffeine.

Diamond thin-film waveguides with a nanocrystalline diamond layer of approximately 20 µm thickness were used in the mid-infrared regime in combination with quantum cascade lasers to detect the IR signature of caffeine. The diamond thin-film waveguides were fundamentally characterized with respect to their morphological properties via AFM and SEM. Theoretical simulations confirmed the feasibility of using a larger sensing area of approximately 50 mm2 compared to conventionally used strip waveguides. A comprehensive and comparative analysis confirmed the performance of the diamond thin-film-waveguide-based sensing system vs data obtained via conventional attenuated total reflection Fourier transform infrared spectroscopy using a single-bounce diamond internal reflection element. Hence, the utility of innovative diamond thin-film-waveguide-based sensors coupled with quantum cascade laser light sources has been confirmed as an innovative analytical tool, which may be used in a wide range of application scenarios, ranging from environmental to medical sensing, taking advantage of the robustness and inertness of nanocrystalline diamond.

Atomic force and infrared spectroscopic studies on the role of surface charge for the anti-biofouling properties of polydopamine films.

Antibacterial polymer materials have gained interest due to their capability to inhibit or eradicate biofilms with greater efficiency in comparison with their monomeric counterparts. Among the antimicrobial and anti-biofouling polymers, catecholamine-based polymers - and in particular polydopamine - have been studied due to their favorable adhesion properties, which can be tuned by controlling the pH value. In this study, we used atomic force microscopy (AFM)-based spectroscopy to investigate the relation between the adhesion properties and surface charge density and the pH of electrochemically deposited polydopamine films presenting a dissociation constant of polydopamine of 6.3 ± 0.2 and a point of zero charge of 5.37 ± 0.06. Furthermore, using AFM and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), the influence of the surface charge density of polydopamine on bacterial adhesion and biofilm formation was investigated. It was shown that the adhesion of Escherichia coli at positively charged polydopamine is three times higher compared to a negatively charged polymer, and that the formation of biofilms is favored at positively charged polymers.

Silver-fluoropolymer (Ag-CFX) films: Kinetic study of silver release, and spectroscopic-microscopic insight into the inhibition of P. fluorescens biofilm formation.

Silver-fluoropolymer (Ag-CFX) composed of encapsulated bioactive nanophases within a thin polymer coating are promising antimicrobial films with excellent bioactivity. In this contribution, we report on Ag-CFX thin films obtained by ion beam co-sputtering, accurately tuning film thickness, and inorganic loading. The Ag-CFX films were characterized by spectroscopic and scanning probe microscopy techniques with respect to composition and swelling behavior. Next to electrothermal atomic absorption spectroscopy (ETAAS) studies, scanning electrochemical microscopy (SECM) experiments in combination with anodic stripping voltammetry (ASV) were carried out to study the release mechanism of silver(I) from the embedded silver nanoparticles (AgNPs). Silver(I) concentration profiles at the Ag-CFX films in contact with water resulted in a release of 1310 ± 50 µg L-1 (n = 3) after 27 h of immersion and corresponded well to the swelling of the films. The antimicrobial properties towards biofilm formation of P. fluorescens were studied by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy during a period of 48 h. The obtained IR data revealed biofilm inhibition due to the presence of the antimicrobial layer but also indicated potential surface re-colonization after 30 h of contact with the bacteria-containing solution. The occurrence of cyclic changes in the characteristic IR bands correlated with apparent stress of bottom-layered bacteria, along with re-colonization on top of dead biomass, indicative of potential cannibalism events.

Probing and Visualizing Interfacial Charge at Surfaces in Aqueous Solution.

Surface charge density and distribution play an important role in almost all interfacial processes, influencing, for example, adsorption, colloidal stability, functional material activity, electrochemical processes, corrosion, nanoparticle toxicity, and cellular processes such as signaling, absorption, and adhesion. Understanding the heterogeneity in, and distribution of, surface and interfacial charge is key to elucidating the mechanisms underlying reactivity, the stability of materials, and biophysical processes. Atomic force microscopy (AFM) and scanning ion conductance microscopy (SICM) are highly suitable for probing the material/electrolyte interface at the nanoscale through recent advances in probe design, significant instrumental (hardware and software) developments, and the evolution of multifunctional imaging protocols. Here, we assess the capability of AFM and SICM for surface charge mapping, covering the basic underpinning principles alongside experimental considerations. We illustrate and compare the use of AFM and SICM for visualizing surface and interfacial charge with examples from materials science, geochemistry, and the life sciences.

Scanning electrochemical microscopy and its potential for studying biofilms and antimicrobial coatings.

Biofilms are known to be well-organized microbial communities embedded in an extracellular polymeric matrix, which supplies bacterial protection against external stressors. Biofilms are widespread and diverse, and despite the considerable large number of publications and efforts reported regarding composition, structure and cell-to-cell communication within biofilms in the last decades, the mechanisms of biofilm formation, the interaction and communication between bacteria are still not fully understood. This knowledge is required to understand why biofilms form and how we can combat them or how we can take advantage of these sessile communities, e.g. in biofuel cells. Therefore, in situ and real-time monitoring of nutrients, metabolites and quorum sensing molecules is of high importance, which may help to fill that knowledge gap. This review focuses on the potential of scanning electrochemical microscopy (SECM) as a versatile method for in situ studies providing temporal and lateral resolution in order to elucidate cell-to-cell communication, microbial metabolism and antimicrobial impact, e.g. of antimicrobial coatings through the study of electrochemical active molecules. Given the complexity and diversity of biofilms, challenges and limitations will be also discussed.

Influence of the cis/trans configuration on the supramolecular aggregation of aryltriazoles.

The ability of trans- and cis-1,2-glucopyranosyl and cyclohexyl ditriazoles, synthesized by CuAAC "click" chemistry, to form gels was studied, their physical properties determined, and the self-aggregation behavior investigated by SEM, X-ray, and EDC studies. The results revealed that self-assembly was driven mainly by π-π stacking interactions, in addition to hydrogen bonding, with the aromatic rings adopting a high degree of parallelism, as seen in crystal packings and ECD data. Furthermore, π-bromine interactions between the bromine atom of the aryl substituents and the triazole units might also contribute to an overall stabilization of the supramolecular aggregation of bis(4-bromophenyl)triazoles. The trans or cis spatial disposition of the triazole rings is highly important for gelation, with the cis configuration having higher propensity.