Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties.

Both numerical simulation and hardness measurements were used to determine the mechanical and microstructural behavior of AZ31 bulk samples when submitted to the Equal Channel Angular Pressing (ECAP) technique. Billets of this representative of Mg-rich alloys were submitted to different numbers of passes for various ECAP modes (anisotropic A, isotropic BC). The strain distribution, the grain size refinement, and the micro-hardness were used as indicators to quantify the effectiveness of the different processing routes. Structural characterizations at different scales were achieved using Scanning Electron Microscopy (SEM), micro-analysis, metallography, Small Angle Neutron Scattering SANS, X-Ray Diffraction (XRD), and texture determination. The grain and crystallite size distribution and orientation as well as defect impacts were determined. Anelastic Spectroscopy (AS) on mechanically deformed samples have shown that the temperature of ECAP differentiate the fragile to ductile regime. MgH2 consolidated powders were checked for using AS to detect potential hydrogen motions and interaction with host metal atoms. After further optimization, the different mechanically-treated samples were submitted to hydrogenation/dehydrogenation (H/D) cycles, which shows that, for a few passes, the BC mode is better than the A one, as supported by theoretical and experimental microstructure analyses. Accordingly, the hydrogen uptake and (H/D) reactions were correlated with the optimized microstructure peculiarities and interpreted in terms of Johnson-Avrami- Mehl-Kolmogorov (JAMK) and Jander models, successively.

Fast H-vacancy dynamics during alanate decomposition by anelastic spectroscopy. proposition of a model for Ti-enhanced hydrogen transport.

A systematic study of the dehydrogenation process of undoped and of catalyzed NaAlH4 by means of anelastic spectroscopy is presented. Evidence is reported of the formation of a highly mobile species during decomposition, which has been identified in off-stoichiometric AlH6-x units, giving rise to fast H vacancy local dynamics. The formation of such stoichiometry defects starts at temperatures much lower in Ti doped than in undoped samples, and concomitantly with the decomposition reaction. The catalyst atoms decrease the energy barrier to be overcome by H to break the bond, thus enhancing the kinetics of the chemical reactions and decreasing the temperature at which the dehydrogenation processes take place. The experimental data show that not all the hydrogen released by the formula units during the evolution of decomposition evolves out of the sample, but part of it remains in the lattice and migrates on a long-range scale within the sample. We identify, in this H mobilized population, the species which induces the fast tetragonal to monoclinic phase transformation accompanying decomposition. A partial spontaneous thermally activated regression of decomposition has also been observed by aging experiments. A model is proposed which accounts for the action of the Ti catalyst and for the atomistic mechanism of decomposition.

Point defect dynamics and evolution of chemical reactions in alanates by anelastic spectroscopy.

We report the first measurements of elastic modulus and energy dissipation in Ti-doped and undoped sodium aluminum hydride. It is shown that the chemical reactions that occur by varying the sample temperatures or by aging most sensitively affect the elastic constants, such that the modulus variations allow the time and temperature evolution of decomposition to be monitored. After a well-defined thermal treatment at 436 K, a thermally activated relaxation process appears at 70 K in the kilohertz range, denoting the existence of a new species, likely involving hydrogen, having a very high mobility, that is, 10(3) jumps/s at the peak temperature corresponding to a relaxation rate of about 10(11) s(-1) at room temperature. The activation energy of the process is 0.126 eV and the preexponential factor 7 x 10(-14) s, which is typical of point defect relaxation. The peak is very broad with respect to a single Debye process, indicating strong interaction or/and multiple jumping type of the mobile entity. The present data suggest that the models aiming at interpreting the decomposition reactions and kinetics should take into account the indicated point-defect dynamics and stoichiometry defects.