ABSTRACT
The WEST tokamak consists of a major upgrade of the superconducting medium size tokamak Tore Supra aiming at testing ITER divertor components. Such modification has required rebuilding a full set of magnetic diagnostics. The project was started in 2013 and completed in 2016. The diagnostic consists of a set of 469 sensors (421 pick-up coils, 36 flux loops, and 12 Rogowski coils) installed in the WEST vacuum vessel. New analog integrators have been developed in order to obtain the magnetic field and flux from the raw signal of the sensors. During the startup phase of WEST, plasma currents of the order of a few kilo amperes were measured despite much larger current of the order of hundreds of kilo amperes flowing in nearby conducting structures. The diagnostic is now fully operational and exhibits a noise level of about 0.5 mT on the magnetic field, and 2.0 mWb on flux loops allowing identifying the plasma boundary with an accuracy of a few millimeters on a 2 ms time cycle.
ABSTRACT
ITER first mirrors (FMs), as the first components of most ITER optical diagnostics, will be exposed to high plasma radiation flux and neutron load. To reduce the FMs heating and optical surface deformation induced during ITER operation, the use of relevant materials and cooling system are foreseen. The calculations led on different materials and FMs designs and geometries (100 mm and 200 mm) show that the use of CuCrZr and TZM, and a complex integrated cooling system can limit efficiently the FMs heating and reduce their optical surface deformation under plasma radiation flux and neutron load. These investigations were used to evaluate, for the ITER equatorial port visible∕infrared wide angle viewing system, the impact of the FMs properties change during operation on the instrument main optical performances. The results obtained are presented and discussed.
