ABSTRACT
We report on a proof-of-concept snapshot imaging spectrometer developed using an array of optical fibers fabricated with 2-photon polymerization (2PP). The dense input array maps to an output array with engineered void spaces for spectral information. Previously, the development and fabrication of custom fiber arrays for imaging spectrometers have been a complex, time-consuming, and costly process, requiring a semi-manual assembly of commercial components. This work applies an automatic development process based on 2PP additive manufacturing with the Nanoscribe GmbH Quantum X system. The technique allows printing of arbitrary optical quality structures with submicron resolution with less than 5â nm roughness, enabling small core fibers/integrated arrays. Specifically, we developed an array prototype of 40 × 80 with 6-micron pitch at the input and 80-micron pitch at the output. The air-clad fibers had a core diameter of 5 µm. Fabricated optical fiber arrays were incorporated into a prism-based imaging spectrometer system with 48 spectral channels to demonstrate multi-spectral imaging. Imaging of a USAF target and color printed letter C as well as spectral comparisons to a commercial spectrometer were used to validate the performance of the system. These results clearly demonstrate the functionality and potential applications of the 3D-printed fiber-based snapshot imaging spectrometer.
ABSTRACT
Advances in 2-photon lithography have enabled in-lab production of sub-micron resolution and millimeter scale 3D optical components. The potential complex geometries are well suited to rapid prototyping and production of waveguide structures, interconnects, and waveguide directional couplers, furthering future development and miniaturization of waveguide-based imaging technologies. System alignment is inherent to the 2-photon process, obviating the need for manual assembly and allowing precise micron scale waveguide geometries not possible in traditional fused fiber coupler fabrication. Here we present the use of 2-photon lithography for direct printing of multi-mode waveguide couplers with air cladding and single mode waveguide couplers with uncured liquid photoresin cladding. Experimental results show reproducible coupling which can be modified by selected design parameters.
ABSTRACT
The tunable light-guide image processing snapshot spectrometer (TuLIPSS) is a novel remote sensing instrument that can capture a spectral image cube in a single snapshot. The optical modelling application for the absolute signal intensity on a single pixel of the sensor in TuLIPSS has been developed through a numerical simulation of the integral performance of each optical element in the TuLIPSS system. The absolute spectral intensity of TuLIPSS can be determined either from the absolute irradiance of the observed surface or from the tabulated spectral reflectance of various land covers and by the application of a global irradiance approach. The model is validated through direct comparison of the simulated results with observations. Based on tabulated spectral reflectance, the deviation between the simulated results and the measured observations is less than 5% of the spectral light flux across most of the detection bandwidth for a Lambertian-like surface such as concrete. Additionally, the deviation between the simulated results and the measured observations using global irradiance information is less than 10% of the spectral light flux across most of the detection bandwidth for all surfaces tested. This optical modelling application of TuLIPSS can be used to assist the optimal design of the instrument and explore potential applications. The influence of the optical components on the light throughput is discussed with the optimal design being a compromise among the light throughput, spectral resolution, and cube size required by the specific application under consideration. The TuLIPSS modelling predicts that, for the current optimal low-cost configuration, the signal to noise ratio can exceed 10 at 10 ms exposure time, even for land covers with weak reflectance such as asphalt and water. Overall, this paper describes the process by which the optimal design is achieved for particular applications and directly connects the parameters of the optical components to the TuLIPSS performance.
