Plant-based fascia tissues: Exploring materials and techniques for realistic simulation.

The growing demand for sustainable and ethical food options has led to significant advancements in plant-based meat substitutes (PBMS). PBMS have made considerable progress in simulating the taste, texture, and sensory properties of animal meat. Connective tissue is a fundamental component of animal meat that significantly influences tenderness, texture, and sensory properties. However, the imitation of realistic connective tissues has received relatively less attention in the PBMS industry. The current work focuses on exploring materials and techniques for the replication of plant-based connective tissues (PBCT). By understanding the structural and functional characteristics of animal connective tissues (ACT), it is possible to replicate these characteristics in PBCT. Hydrogels, with their ability to simulate certain properties of ACT, present a viable material for the creation of PBCT. To achieve the desired simulation, their mechanical and structural properties need to be enhanced by using several materials and several physical techniques.

Investigation into the fabrication of plant-based simulant connective tissue utilizing algae polysaccharide-derived hydrogel.

Connective tissue is an important component of meat products that provides support to animal muscles. Hydrogels are considered a promising alternative to connective tissues and simulate actual products by adjusting the gel texture and mouthfeel. This study used soybean protein isolate (SPI), corn starch (CS), konjac glucomannan (KGM), and seaweed powder (SP) as raw materials to examine the effect of different added SP and KGM concentrations on the gel texture. The G' of the gel increased five-fold when the SP and KGM concentration was increased from 1 % to 3 %. The results of mechanical property tests showed that with the addition of SP, the gel hardness increased from 316.00 g to 1827.23 g and the tensile strength increased from 0.027 MPa to 0.089 MPa. Sensory evaluation showed that the samples with 2 % SP and KGM presented the highest overall acceptability score and the most significant similarity to real connective tissue. The connective tissue simulants exhibited excellent water-holding capacity (>90 %), significantly increasing their juiciness. SEM indicated that 2 % KGM addition improved gel network structure stability. The results demonstrate the potential of seaweed polysaccharide-derived hydrogels as connective tissue mimics. This provides a new strategy for the preparation of high mechanical strength hydrogels and lays the foundation for structural diversification of plant-based meat.

Salt ions improve soybean protein isolate/curdlan complex fat substitutes: Effect of molecular interactions on freeze-thaw stability.

Although emulsion gels show significant potential as fat substitutes, they are vulnerable to degreasing, delamination, and other undesirable processes during freezing, storage, and thawing, leading to commercial value loss in terms of juiciness, flavor, and texture. This study investigated the gel strength and freeze-thaw stability of soybean protein isolate (SPI)/curdlan (CL) composite emulsion gels after adding sodium chloride (NaCl). Analysis revealed that adding low salt ion concentrations promoted the hardness and water-holding capacity (WHC) of fat substitutes, while high levels displayed an inhibitory effect. With 40 mM NaCl as the optimum concentration, the hardness increased from 259.33 g (0 mM) to 418.67 g, the WHC increased from 90.59 % to 93.18 %, exhibiting good freeze-thaw stability. Confocal laser scanning microscopy (CLSM) and particle size distribution were used to examine the impact of salt ion concentrations on protein particle aggregation and the damaging effect of freezing and thawing on the proteoglycan complex network structure. Fourier-transform infrared spectroscopy (FTIR) and protein solubility evaluation indicated that the composite gel network structure consisted of covalent contacts between the proteoglycan molecules and hydrogen bonds, playing a predominant role in non-covalent interaction. This study showed that the salt ion concentration in the emulsion gel affected its molecular interactions.

Quality, Thermo-Rheology, and Microstructure Characteristics of Cubic Fat Substituted Pork Patties with Composite Emulsion Gel Composed of Konjac Glucomannan and Soy Protein Isolate.

Composite emulsion gel can effectively mimic animal adipose tissue. In this study, composite emulsion gels composed of soy protein isolates and konjac glucomannan (KGM) were prepared as plant-based cubic fat substitutes (CFS). The effects of CFS on the quality and structure of pork patties were investigated in terms of the proximate composition, lipid oxidation stability, technological characteristics, color, sensory attributes, texture, thermo-rheological behavior, and microstructure. CFS samples composed of various ratios of KGM were added to lean meat patties to ascertain the optimal CFS composition for its potential replacement of pork back fat in patties. The addition of CFS containing 7.0% KGM was found to decrease the hardness of the lean meat patties by 71.98% while simultaneously improving their sensory quality. The replacement of pork back fat with CFS also reduced the fat content of the patties to as little as 3.65%. Furthermore, the addition of CFS enhanced the technological characteristics, lipid oxidation stability, and surface color of the fat-replaced patties, with no significant impact on their overall acceptability. The gel network of the patties was shown to be fine and remained compact as the fat replacement ratio increased to 75%, while the texture parameters, storage modulus, and fractal dimension all increased. Quality and structure improvements may allow the composite emulsion gels to replace fat in pork patties to support a healthy diet. This study may be beneficial for the application and development of plant-based cubic fat substitutes.

Properties of texturized protein and performance of different protein sources in the extrusion process: A review.

The need for protein is increasing due to the rapid growth of the global population. However, conventional animal meat production has caused severe environmental, land usage, and other issues. Meat substitutes can provide consumers with a high-quality alternative to protein. Texturized protein (TP) is a critical ingredient in meat substitutes and is mainly obtained through extrusion processing. Therefore, this review first discussed the essential physical properties of TP, including appearance and structure, water-holding capacity (WHC) and oil-holding capacity (OHC), texture, and sensory properties. The performance of plant and novel source proteins in extrusion processing is also summarized. The properties of the desired TP should be considered first before extrusion processing. Under different extrusion parameters, proteins from the same source can exhibit varying properties. Although the novel source proteins can adversely affect TP quality, their high yield and environmental protection are worthy of further study. This paper aims to review the impact of proteins from different sources on the properties of TP during the extrusion process and discuss practical research methods for TP.

Prospects for Plant-Based Meat: Current Standing, Consumer Perceptions, and Shifting Trends.

Dietary habits have a substantial influence on both planet and individual health. High intake of animal products has significant negative effects on the environment and on human health; hence, a reduction in meat consumption is necessary. The transition towards plant-based meat (PBM) is one of the potential solutions for environmental and health issues. To achieve this goal, it is important to understand the dietary habits and demands of consumers. This review was designed with a focus on PBM alternatives, dietary shifts during the COVID-19 pandemic, the drivers of consumers' perceptions in various countries, and the measures that can promote the shift towards PBM. The PBM market is predicted to grow with rising awareness, familiarity, and knowledge in the coming years. Companies must focus on the categories of anticipated benefits to aid consumers in making the switch to a diet higher in PBM alternatives if they want to win over the target market.

Ingredients and Process Affect the Structural Quality of Recombinant Plant-Based Meat Alternatives and Their Components.

Recombinant plant-based meat alternatives are a kind of product that simulates animal meat with complete structure by assembling plant-tissue protein and other plant-based ingredients. The market is growing rapidly and appears to have a promising future due to the broad culinary applicability of such products. Based on the analysis and summary of the relevant literature in the recent five years, this review summarizes the effects of raw materials and production methods on the structure and quality of specific components (tissue protein and simulated fat) in plant-based meat alternatives. Furthermore, the important roles of tissue and simulated fat as the main components of recombinant plant-based meat alternatives are further elucidated herein. In this paper, the factors affecting the structure and quality of plant-based meat alternatives are analyzed from part to whole, with the aim of contributing to the structural optimization and providing reference for the future development of the plant meat industry.

Pasting, Rheological, and Tribological Properties of Rice Starch and Oat Flour Mixtures at Different Proportions.

Rice starch (RS) and oat flour (OF) were mixed in different proportions, and the pasting properties, particle size, rheology, and tribological properties of the mixed system were analyzed. According to the RVA results, OF inhibited the starch pasting, and the pasting temperature and peak viscosity of the mixed system increased. The particle size shifted toward the small particle size after the mixing of RS and OF components, and the RS/OF 9/1 particle size is the smallest. All samples exhibited shear dilution behavior and the viscosity of the system could be significantly increased at a 10 wt% RS content. At sliding speeds of >1 mm/s, the friction of the mixture is usually between the two individual components, which also confirmed the association or interaction between the two polymers.

Application of Emulsion Gels as Fat Substitutes in Meat Products.

Although traditional meat products are highly popular with consumers, the high levels of unsaturated fatty acids and cholesterol present significant health concerns. However, simply using plant oil rich in unsaturated fatty acids to replace animal fat in meat products causes a decline in product quality, such as lower levels of juiciness and hardness. Therefore, it is necessary to develop a fat substitute that can ensure the sensory quality of the product while reducing its fat content. Consequently, using emulsion gels to produce structured oils or introducing functional ingredients has attracted substantial attention for replacing the fat in meat products. This paper delineated emulsion gels into protein, polysaccharide, and protein-polysaccharide compound according to the matrix. The preparation methods and the application of the three emulsion gels as fat substitutes in meat products were reviewed. Since it displayed a unique separation structure, the double emulsion was highly suitable for encapsulating bioactive substances, such as functional oils, flavor components, and functional factors, while it also exhibited significant potential for developing low-fat or functional healthy meat products. This paper summarized the studies involving the utilization of double emulsion and gelled double emulsion as fat replacement agents to provide a theoretical basis for related research and new insight into the development of low-fat meat products.

Mimic Pork Rinds from Plant-Based Gel: The Influence of Sweet Potato Starch and Konjac Glucomannan.

This study investigated the effect of sweet potato starch (SPS) and konjac glucomannan (KGM) on the textural, color, sensory, rheological properties, and microstructures of plant-based pork rinds. Plant-based gels were prepared using mixtures of soy protein isolate (SPI), soy oil, and NaHCO3 supplemented with different SPS and KGM concentrations. The texture profile analysis (TPA) results indicated that the hardness, cohesiveness, and chewiness of the samples improved significantly after appropriate SPS and KGM addition. The results obtained via a colorimeter showed no significant differences were found in lightness (L*) between the samples and natural pork rinds after adjusting the SPS and KGM concentrations. Furthermore, the rheological results showed that adding SPS and KGM increased both the storage modulus (G') and loss modulus (G''), indicating a firmer gel structure. The images obtained via scanning electron microscopy (SEM) showed that the SPS and KGM contributed to the formation of a more compact gel structure. A mathematical model allowed for a more objective sensory evaluation, with the 40% SPS samples and the 0.4% KGM samples being considered the most similar to natural pork rinds, which provided a comparable texture, appearance, and mouthfeel. This study proposed a possible schematic model for the gelling mechanism of plant-based pork rinds: the three-dimensional network structures of the samples may result from the interaction between SPS, SPI, and soybean oil, while the addition of KGM and NaHCO3 enabled a more stable gel structure.

Physicochemical properties and microstructural behaviors of rice starch/soy proteins mixtures at different proportions.

Rice starch (RS) and soy protein (SP) were mixed at various ratios and the physicochemical, rheological and tribological properties of the resulted pastes were analyzed. Microscopy and spectral techniques were applied to follow the structural changes during cooling and heating processes. Higher proportion of SP resulted in lower swelling power. According to DSC and RVA results, SP inhibited the gelatinization of starch, leading to higher pasting temperature; the peak, trough, final viscosities, set back and enthalpy changes were decreased with increasing SP concentration. All the samples presented a shear thinning behavior and the mixtures with soy proteins showed lower viscosity, yield stress and consistency coefficient than pure starch paste. The creep-recovery test showed that the addition of soy proteins resulted in more liquid-like mixtures, causing weakening of instantaneous elastic recovery. The combination of rice starch and soy proteins increased the friction, compared with their individual components, except RS/SP 9/1 at sliding speed >20 mm/s. According to the microstructure and spectra analysis, the soy protein adhered on the surface of starch granules, which might have hindered the leaching of amylopectin; and the association between starch and soy proteins mainly occurred when the starch granules were gelatinized, which could be reinforced during starch retrogradation.

Create Fat Substitute From Soybean Protein Isolate/Konjac Glucomannan: The Impact of the Protein and Polysaccharide Concentrations Formulations.

In this study, soybean protein isolate (SPI) and coconut oil were emulsified and konjac flour was added to prepare the protein/polysaccharide composite emulsion gel. The SPI/polysaccharide compound fat substitute was obtained by vacuuming. The effects of protein and konjac flour addition on the gel system of the mixed emulsion were explored. Sensory evaluation experiments showed that the overall acceptability of fat substitutes added with 1% SPI was higher. With the increase of protein and konjac content, the juiciness of the samples decreased gradually. The increase of konjac content reduced the brightness of compound fat substitutes, and the yellowness of compound fat substitute increases significantly with the increase of protein content. The rheological results showed that the G' and loss modulus (G″) increased with the increase of protein and konjac content, forming a rigid elastic gel matrix, which provided a basis for the preparation of fat substitutes. Texture profile analysis (TPA) results showed that the springiness of all samples was similar to the natural fat after 20 min of heating. With the increase of protein and konjac content, the hardness of the samples increased gradually. The results of oral tribology showed that the friction coefficients of all samples were very small. The friction behavior of the samples with SPI content of 1% was similar to that of natural fat, which could better simulate the swallowing feeling and lubricity of natural fat. To sum up, the appearance of solid fat substitutes prepared with SPI and konjac flour is similar to pork fat. They show ideal functional characteristics in mechanical properties and oral tribology. Among them, the fat substitute with the protein content of 1% and konjac content of 4% is the most popular among consumers.

Rheology and tribology properties of cereal and legume flour paste from different botanical origins.

Paste made from eight types of cereal grains (low fiber containing grains [LF grains]: rice, sticky rice, black rice, and millet; and high fiber containing grains [HF grains]: wheat, buckwheat, oat, and barley), and four types of legumes (soybean, red bean, kidney bean, and mung bean), were studied in terms of particle size, rheological, and tribological properties. Sticky rice and soybean pastes showed lower yield stress, viscosity and consistency coefficient than other pastes. Most cereal pastes showed a major peak at approximately 160 µm except for oat and barley, while legume pastes showed mono modal profiles except for soybean. Tribological results showed that starch tended to develop type A friction profiles, showing a typical Stribeck curve; bran/fiber tended to develop type B profiles, showing an ascent curve with clear onset of hydrodynamic regime; protein and lipids promoted type C profiles, showing a flat plateau shaped curve. Water soluble polysaccharides in grains or legumes could improve the paste lubrication. In general, 5% of the black rice paste and sticky rice in the LF grain group, and the soybean paste in the legume group, showed a low friction coefficient (µ) in the entire entrainment speed range; barley paste and oat paste in the HF grain group showed relatively low µ at low entrainment speed (0.5 mm/s) and medium entrainment speed (5 and 10 mm/s), respectively.