Characteristics of PM2.5 bounded carbonaceous aerosols, carbon dioxide and its stable carbon isotopes (δ13C) in rural households in northwest China: Effect of different fuel combustion.

In order to fully understand the carbon emission from different fuels in rural villages of China, especially in the typical atmospheric pollution areas. The characteristics of carbonaceous aerosols and carbon dioxide (CO2) with its stable carbon isotope (δ13C) were investigated in six households, which two households used coal, two households used wood as well as two households used biogas and liquefied petroleum gas (LPG), from two rural villages in Fenwei Plain from March to April 2021. It showed that the fine particulate matter (PM2.5) emitted from biogas and LPG couldn't be as lower as expected in this area. However, the clean fuels could relatively reduce the emissions of organic carbon (OC) and element carbon (EC) in PM2.5 compare to the solid fuels. The pyrolyzed carbon (OP) accounted more total carbon (TC) in coal than the other fuels use households, indicating that more water-soluble OC existed, and it still had the highest secondary organic carbon (SOC) than the other fuels. Meantime, the coal combustions in the two villages had the highest CO2 concentration of 527.6 ppm and 1120.6 ppm, respectively, while the clean fuels could effectively reduce it. The average δ13C values (-26.9‰) was much lighter than almost all the outdoor monitoring and similar to the δ13C values for coal combustion and vehicle emission, showing that they might be the main contributors of the regional atmospheric aerosol in this area. During the sandstorm, the indoor PM2.5 mass and CO2 were increasing obviously. The indoor cancer risk of PAHs for adults and children were greater than 1 × 10-6, exert a potential carcinogenic risk to human of solid fuels combustion in rural northern China. It is important to continue concern the solid fuel combustion and its health impact in rural areas.

Exploring secondary aerosol formation associated with elemental carbon in the lower free troposphere.

The variability of element carbon (EC) mixed with secondary species significantly complicates the assessment of its environmental impact, reflecting the complexity and diversity of EC-containing particles' composition and morphology during their ascent and regional transport. While the catalytic role of EC in secondary aerosol formation is recognized, the effects of heterogeneous chemistry on secondary species formation within diverse EC particle types are not thoroughly understood, particularly in the troposphere. Alpine sites offer a prime environment to explore EC properties post-transport from the ground to the free troposphere. Consequently, we conducted a comprehensive study on the genesis of secondary aerosols in EC-containing particles at Mt. Hua (altitude: 2069 m) from 1 May to 10 July, using a single particle aerosol mass spectrometer (SPAMS). Our analysis identified six major EC particle types, with EC-K, EC-SN, and EC-NaK particles accounting for 27.6 %, 27.0 %, and 19.6 % of the EC particle population, respectively. The concentration-weighted trajectory (CWT) indicated that the lower free troposphere over Mt. Hua is significantly affected by anthropogenic emissions at ground-level, predominantly from northwestern and eastern China. Atmospheric interactions are crucial in generating high sulfate levels in EC-SN and EC-OC particles (> 70 %) and notable nitrate levels in EC-K, EC-BB, and EC-Fe particles (> 80 %). The observed high chloride content in EC-OC particles (56 ± 32 %) might enhance chlorine's reactivity with organic compounds via heterogeneous reactions within the troposphere. Distinct diurnal cycles for sulfate and nitrate are mainly driven by varying transport dynamics and formation processes, showing minimal dependency on EC particle types. Enhanced nocturnal oxalate conversion in EC-Fe particles is likely due to the aqueous oxidation of precursors, with Fe-catalyzed Fenton reactions enhancing OH radical production. This investigation provides critical insights into EC's role in secondary aerosol development during its transport in the lower free troposphere.

Local incomplete combustion emissions define the PM2.5 oxidative potential in Northern India.

The oxidative potential (OP) of particulate matter (PM) is a major driver of PM-associated health effects. In India, the emission sources defining PM-OP, and their local/regional nature, are yet to be established. Here, to address this gap we determine the geographical origin, sources of PM, and its OP at five Indo-Gangetic Plain sites inside and outside Delhi. Our findings reveal that although uniformly high PM concentrations are recorded across the entire region, local emission sources and formation processes dominate PM pollution. Specifically, ammonium chloride, and organic aerosols (OA) from traffic exhaust, residential heating, and oxidation of unsaturated vapors from fossil fuels are the dominant PM sources inside Delhi. Ammonium sulfate and nitrate, and secondary OA from biomass burning vapors, are produced outside Delhi. Nevertheless, PM-OP is overwhelmingly driven by OA from incomplete combustion of biomass and fossil fuels, including traffic. These findings suggest that addressing local inefficient combustion processes can effectively mitigate PM health exposure in northern India.

Nitroaromatic compounds in six major Chinese cities: Influence of different formation mechanisms on light absorption properties.

Nitroaromatic compounds (NACs) are important nitrogen organics in aerosol with strong light-absorbing and chemically reactive properties. In this study, NACs in six Chinese megacities, including Harbin (HB), Beijing (BJ), Xi'an (XA), Wuhan (WH), Chengdu (CD), and Guangzhou (GZ), were investigated for understanding their sources, gas-particle partitioning, and impact on BrC absorption properties. The concentrations of ΣNACs in PM2.5 in the six cities ranged from 9.15 to 158.8 ng/m3 in winter and from 2.02 to 9.39 ng/m3 in summer. Nitro catechols (NCs), nitro phenols (NPs), and nitro salicylic acids (NSAs) are the main components in ΣNACs, with NCs being dominant in particulate phase and NPs being dominant in the gas phase. Correlation analysis between different pollutant species revealed that coal and biomass combustions were the major sources of NACs in the northern cities during wintertime, while secondary formation dominated NACs in the southern cities during summertime. The contribution of ΣNACs to brown carbon (BrC) light absorption ranged from 0.85 to 7.98 % during the wintertime and 2.07-6.44 % during the summertime. The mass absorption efficiency at 365 nm (MAE365) were highest for 4-nitrocatechol (4NC, 17.4-89.0 m2/g), 4-methyl-5-nitrocatechol (4M5NC, 15.0-76.9 m2/g), and 4-nitroguaiacol (4NG, 11.7-59.8 m2/g). The formation of NCs and NG through oxidation and nitration of catechol and guaiacol led to a significant increase in aerosol light absorption. In contrast, NPs and NSAs formed by the photonitration and photooxidation in liquid phase showed high polarity but low light absorption ability, and the proportions of (NPs + NSAs) in the light absorption of ΣNACs were lower than 15.3 % in the six megacities.

Major source categories of PM2.5 oxidative potential in wintertime Beijing and surroundings based on online dithiothreitol-based field measurements.

Fine particulate matter (PM2.5) causes millions of premature deaths each year worldwide. Oxidative potential (OP) has been proposed as a better metric for aerosol health effects than PM2.5 mass concentration alone. In this study, we report for the first time online measurements of PM2.5 OP in wintertime Beijing and surroundings based on a dithiothreitol (DTT) assay. These measurements were combined with co-located PM chemical composition measurements to identify the main source categories of aerosol OP. In addition, we highlight the influence of two distinct pollution events on aerosol OP (spring festival celebrations including fireworks and a severe regional dust storm). Source apportionment coupled with multilinear regression revealed that primary PM and oxygenated organic aerosol (OOA) were both important sources of OP, accounting for 41 ± 12 % and 39 ± 10 % of the OPvDTT (OP normalized by the sampled air volume), respectively. The small remainder was attributed to fireworks and dust, mainly resulting from the two distinct pollution events. During the 3.5-day spring festival period, OPvDTT spiked to 4.9 nmol min-1 m-3 with slightly more contribution from OOA (42 ± 11 %) and less from primary PM (31 ± 15 %). During the dust storm, hourly-averaged PM2.5 peaked at a very high value of 548 µg m-3 due to the dominant presence of dust-laden particles (88 % of total PM2.5). In contrast, only mildly elevated OPvDTT values (up to 1.5 nmol min-1 m-3) were observed during this dust event. This observation indicates that variations in OPvDTT cannot be fully explained using PM2.5 alone; one must also consider the chemical composition of PM2.5 when studying aerosol health effects. Our study highlights the need for continued pollution control strategies to reduce primary PM emissions, and more in-depth investigations into the source origins of OOA, to minimize the health risks associated with PM exposure in Beijing.

Correction: Combined use of principal component analysis/multiple linear regression analysis and artificial neural network to assess the impact of meteorological parameters on fluctuation of selected PM2.5-bound elements.

[This corrects the article DOI: 10.1371/journal.pone.0287187.].

Mandating indoor air quality for public buildings.

If some countries lead by example, standards may increasingly become normalized.

Comparison of acidity and chemical composition of summertime cloud water and aerosol at an alpine site in Northwest China: Implications for the neutral property of clouds in the free troposphere.

Aerosol and cloud acidity are essential to human health, ecosystem health and productivity, as well as climate effects. The main chemical composition of cloud water greatly varies in different regions, resulting in substantial differences in the pH of cloud water. However, the influences of the anthropogenic emissions of acidic gases and substances, alkaline dust components, and dicarboxylic acids (diacids) on the ground concerning the acidity of cloud water in the free troposphere of the Guanzhong Plain, China, remain clear. In this study, cloud water and PM2.5 samples were simultaneously collected in the troposphere (Mt. Hua, 2060 m a.s.l). The results indicated that the cloud water was alkaline (pH = 7.6) and PM2.5 was acidic (pH = 3.2). These results showed the neutral property of clouds collected in the heavily polluted Guanzhong Plain, although most previous studies always considered acidity as a marker of pollution. The sulfate (SO42-), nitrate (NO3-), and ammonium (NH4+) (SNA) of particulate matter and cloud water in the same period were compared. SO42- was dominant in particulate matters (accounting for 63.4 % of the total SNA) but substantially decreased in cloud water (only 30.1 % of the total SNA), whereas NO3- and NH4+ increased from 28.5 % and 8.2 % to 39.8 % and 30.2 %, respectively. This could be attributed to the complex formation mechanism and sources of SO42- and NO3- in the cloud. The results of ion balance indicated that a significant deficit of inorganic anion equivalents was observed in the cloud water samples. The high concentration of diacids in the cloud phase (1237.4 µg L-1) may facilitate the formation of salt complexes with NH4+, thus influencing the acidity of the cloud water. The pH of cloud water has increased in recent decades due to the sustained reduction of sulfur dioxide, which may also affect the acidity of future precipitation.

Source-specific light absorption and radiative effects decreases and indications due to the lockdown.

The 'extreme' emission abatement during the lockdown (from the end of 2019 to the early 2020) provided an experimental period to investigate the corresponding source-specific effects of aerosol. In this study, the variations of source-specific light absorption (babs) and direct radiative effect (DRE) were obtained during and after the lockdown period by using the artificial neural network (ANN) and source apportionment environmental receptor model. The results showed that the babs decreased for all sources during the two periods. The most reductions were observed with ∼90% for traffic-related emissions (during the lockdown) and ∼85% for coal combustion (after the lockdown), respectively. Heightened babs (370 nm) values were obtained for coal and biomass burning during the lockdown, which was attributed to the enhanced atmospheric oxidization capacity. Nevertheless, the variations of babs (880 nm) after the lockdown was mainly due to the weakening of oxidation and reduced emissions of secondary precursors. The present study indicated that the large-scale emission reduction can promote both reductions of babs (370 nm) and DRE (34-68%) during the lockdown. The primary emissions decrease (e.g., Traffic emission) may enhance atmosphere oxidation, increase the ultraviolet wavelength light absorption and DRE efficiencies. The source-specific emission reduction may be contributed to various radiation effects, which is beneficial for the adopting of control strategies.

Variability in molecular composition and optical absorption of atmospheric brown carbon aerosols in two contrasting urban areas of China.

Atmospheric brown carbon (BrC) aerosols were investigated at two urban sites in southern (Hefei) and northern (Shijiazhuang) China during summer and winter of 2019-2020 to explore regional variability in their compositional and optical properties. Organic matter in ambient PM2.5 samples were characterized at molecular level using ultrahigh performance liquid chromatography coupled with a diode array detector and an Orbitrap mass spectrometer. Although the molecular composition of organic aerosols varied substantially over different ambient environments, they were mainly composed by CHO and CHON species in positive ionization mode while CHO and CHOS species in negative mode. The mass absorption coefficients of BrC aerosols at wavelength range 250-450 nm were relatively higher for winter samples in both cities and for Shijiazhuang samples in both seasons, partly attributed to the higher concentration levels of anthropogenic air pollutants in these environments. The absorption Ångström exponents further revealed that BrC aerosols in winter seasons and in Shijiazhuang had a greater capacity of absorption at shorter wavelengths. A total of 26 BrC species with strong absorption were unambiguously identified from different environments, which mainly consisted of CHO, CHON, and CHN species and had higher degrees of unsaturation and lower degrees of oxidation. The presence and abundance of these BrC species varied dynamically across the seasons and cities, with a greater number of species presented in the winter of Shijiazhuang. The BrC species together contributed 12-26 % in the total absorbance of light-absorbing organic components at 250-450 nm. This study highlights the regional differences in BrC properties influenced by the sources and atmospheric processes, which should be taken into account to assess their climate impacts.

Improved hourly estimate of aerosol optical thickness over Asian land by fusing geostationary satellites Fengyun-4B and Himawari-9.

Asian over-land aerosols are complexities due to a mixture of anthropogenic air pollutants and natural dust. The accuracy of the aerosol optical thickness (AOT) retrieved from the satellite is crucial to their application in the aerosol data assimilation system. Fusion of AOTs with high spatiotemporal resolution from next-generation geostationary satellites such as Fengyun-4B (FY-4B) and Himawari-9, provides a new high-quality dataset capturing the aerosol spatiotemporal variability for data assimilation. This study develops a complete fusion algorithm to estimate the optimal AOT over-land in Asia from September 2022 to August 2023 at 10 km × 10 km resolution with high efficiency. The data fusion involves four steps: (1) investigating the spatiotemporal variability of FY-4B AOT within the past 1 h and 12 km radius calculation domain; (2) utilizing the aerosol spatiotemporal variability characteristics to estimate FY-4B pure and hourly merged AOTs; (3) performing bias corrections for FY-4B and Himwari-9 hourly merged AOT for different observation times and seasons considering pixel-level errors for each satellite; (4) fusing the bias-corrected FY-4B and Himawari-9 hourly merged AOT based on maximum-likelihood estimation (MLE) method. Compared to the original FY-4B AOT, validation with AERONET observation confirms that the root mean square error (RMSE) of hourly merged FY-4B AOT decreases by around 40.6 % and the correlation coefficient (CORR) increases by about 27.8 %. Compared to FY-4B and Himawari-9 merged AOT, the fused AOT significantly decreases (increases) RMSE (CORR) by around 24.7 % (7.3 %) and 20.2 % (5.6 %). In addition, fused AOT is double the number of single-sensor merged AOT. Fusion aerosol map accurately describes the spatial and temporal variations in Asian regions controlled by air pollution and dust storms. Further studies are required for other landscapes with different satellite combinations to promote the application in the data assimilation system.

Combined use of principal component analysis/multiple linear regression analysis and artificial neural network to assess the impact of meteorological parameters on fluctuation of selected PM2.5-bound elements.

Based on the data of the State of Global Air (2020), air quality deterioration in Thailand has caused ~32,000 premature deaths, while the World Health Organization evaluated that air pollutants can decrease the life expectancy in the country by two years. PM2.5 was collected at three air quality observatory sites in Chiang-Mai, Bangkok, and Phuket, Thailand, from July 2020 to June 2021. The concentrations of 25 elements (Na, Mg, Al, Si, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Sr, Ba, and Pb) were quantitatively characterised using energy-dispersive X-ray fluorescence spectrometry. Potential adverse health impacts of some element exposures from inhaling PM2.5 were estimated by employing the hazard quotient and excess lifetime cancer risk. Higher cancer risks were detected in PM2.5 samples collected at the sampling site in Bangkok, indicating that vehicle exhaust adversely impacts human health. Principal component analysis suggests that traffic emissions, crustal inputs coupled with maritime aerosols, and construction dust were the three main potential sources of PM2.5. Artificial neural networks underlined agricultural waste burning and relative humidity as two major factors controlling the air quality of Thailand.

Insight into the Role of NH3/NH4+ and NOx/NO3- in the Formation of Nitrogen-Containing Brown Carbon in Chinese Megacities.

Particulate brown carbon (BrC) plays a crucial role in the global radiative balance due to its ability to absorb light. However, the effect of molecular formation on the light absorption properties of BrC remains poorly understood. In this study, atmospheric BrC samples collected from six Chinese megacities in winter and summer were characterized through ultrahigh-performance liquid chromatography coupled with Orbitrap mass spectrometry (UHPLC-Orbitrap MS) and light absorption measurements. The average values of BrC light absorption coefficient at a wavelength of 365 nm (babs365) in winter were approximately 4.0 times higher than those in summer. Nitrogen-containing organic molecules (CHNO) were identified as critical components of light-absorbing substances in both seasons, underscoring the importance of N-addition in BrC. These nitrogen-containing BrC chromophores were more closely related to nitro-containing compounds originating from biomass burning and nitrogen oxides (NOx)/nitrate (NO3-) reactions in winter. In summer, they were related to reduced N-containing compounds formed in ammonia (NH3)/ammonium (NH4+) reactions. The NH3/NH4+-mediated reactions contributed more to secondary BrC in summer than winter, particularly in southern cities. Compared with winter, the higher O/Cw, lower molecule conjugation indicator (double bond equivalent, DBE), and reduced BrC babs365 in summer suggest a possible bleaching mechanism during the oxidation process. These findings strengthen the connection between molecular composition and the light-absorbing properties of BrC, providing insights into the formation mechanisms of BrC chromophores across northern and southern Chinese cities in different seasons.

The impacts of regional transport on anthropogenic source contributions of PM2.5 in a basin city, China.

PM2.5 pollution events are often happened in urban agglomeration locates in mountain-basin regions due to the complex terra and intensive emissions. Source apportionment is essential for identifying the pollution sources and important for developing local mitigation strategies, however, it is influenced by regional transport. To understand how the regional transport influences the atmospheric environment of a basin, we connected the PM2.5 source contributions estimated by observation-based receptor source apportionment and the regional contributions estimated by a tagging technology in the comprehensive air quality model with extensions (CAMx) via an artificial neural network (ANNs). The result shows that the PM2.5 in Xi'an was from biomass burning, coal combustion, traffic related emissions, mineral dust, industrial emissions, secondary nitrate and sulfate. 48.8 % of the PM2.5 in study period was from Xi'an, then followed by the outside area of Guanzhong basin (28.2 %), Xianyang (14.6 %) and Weinan (5.8 %). Baoji and Tongchuan contributed trivial amount. The sensitivity analysis showed that the transported PM2.5 would lead to divergent results of source contributions at Xi'an. The transported PM2.5 from the outside has great a potential to alter the source contributions implying a large uncertainty of the source apportionment introduced when long-range transported pollutants arrived. It suggests that a full comprehension on the impacts of regional transport can lower the uncertainty of the local PM2.5 source apportionment and reginal collaborative actions can be of great use for pollution mitigation.

Sustainable all-weather CO2 utilization by mimicking natural photosynthesis in a single material.

Solar-driven CO2 conversion into hydrocarbon fuels is a sustainable approach to synchronously alleviating the energy crisis and achieving net CO2 emissions. However, the dependence of the conversion process on solar illumination hinders its practical application due to the intermittent availability of sunlight at night and on cloudy or rainy days. Here, we report a model material of Pt-loaded hexagonal tungsten trioxide (Pt/h-WO3) for decoupling light and dark reaction processes, demonstrating the sustainable CO2 conversion under dark conditions for the first time. In such a material system, hydrogen atoms can be produced by photocatalytic water splitting under solar illumination, stored together with electrons in the h-WO3 through the transition of W6+ to W5+ and spontaneously released to trigger catalytic CO2 reduction under dark conditions. Furthermore, we demonstrate using natural light that CH4 production can persist at night and on rainy days, proving the accomplishment of all-weather CO2 conversion via a sustainable way.

Characteristics, sources, and health risk assessment of atmospheric particulate mercury in Guanzhong Basin.

Mercury (Hg) has received increasing public attention owing to its high toxicity and global distribution capability via long-range atmospheric transportation. Guanzhong Basin (GB) is vital for the industrial and economic development of Shaanxi Province. To determine the concentration, spatial distribution, seasonal variation, sources, and health risks of particulate-bound mercury (PBM), PM2.5 samples were collected at three sampling sites representing urban, rural, and remote areas during winter and summer in GB. The three sampling sites were in Xi'an (XN), Taibai (TB), and the Qinling Mountains (QL). The mean PBM concentrations in XN, TB, and QL in winter were 130 ± 115 pg m-3, 57.5 ± 47.3 pg m-3, and 53.6 ± 38.5 pg m-3, respectively, higher than in summer (13.7 ± 7.11 pg m-3, 8.01 ± 2.86 pg m-3, and 7.75 ± 2.85 pg m-3, respectively). PBM concentrations are affected by precipitation, meteorological conditions (temperature and mixed boundary layer), emission sources, and atmospheric transport. During the sampling period, the PBM dry deposition in XN, TB, and QL was 1.90 µg m-2 (2 months), 0.835 µg m-2 (2 months), and 0.787 µg m-2 (2 months), respectively, lower than the range reported in national megacities. According to backward trajectory and potential source contribution factor (PSCF) analysis, mercury pollution in XN is mainly affected by local pollution source emissions, whereas the polluted air mass in TB and QL originates from local anthropogenic emissions and long-distance atmospheric transmission. The non-carcinogenic health risk values of PBM in XN, TB, and QL in winter and summer were less than 1, indicating that the risk of atmospheric PBM to the health of the residents was negligible.

High-time resolution PM2.5 source apportionment assisted by spectrum-based characteristics analysis.

Characteristics extraction and anomaly analysis based on frequency spectrum can provide crucial support for source apportionment of PM2.5 pollution. In this study, an effective source apportionment framework combining the Fast Fourier Transform (FFT)- and Continuous Wavelet Transform (CWT)-based spectral analyses and Positive Matrix Factorization (PMF) receptor model is developed for spectrum characteristics extraction and source contribution assessment. The developed framework is applied to Beijing during the winter heating period with 1-h time resolution. The spectrum characteristics of anomaly frequency, location, duration and intensity of PM2.5 pollution can be captured to gain an in-depth understanding of source-oriented information and provide necessary indicators for reliable PMF source apportionment. The combined analysis demonstrates that the secondary inorganic aerosols make relatively high contributions (50.59 %) to PM2.5 pollution during the winter heating period in Beijing, followed by biomass burning, vehicle emission, coal combustion, road dust, industrial process and firework emission sources accounting for 15.01 %, 11.00 %, 10.70 %, 5.31 %, 3.88 %, and 3.51 %, respectively. The source apportionment result suggests that combining frequency spectrum characteristics with source apportionment can provide consistent rationales for understanding the temporal evolution of PM2.5 pollution, identifying the potential source types and quantifying the related contributions.

Shifts in soil ammonia-oxidizing community maintain the nitrogen stimulation of nitrification across climatic conditions.

Anthropogenic nitrogen (N) loading alters soil ammonia-oxidizing archaea (AOA) and bacteria (AOB) abundances, likely leading to substantial changes in soil nitrification. However, the factors and mechanisms determining the responses of soil AOA:AOB and nitrification to N loading are still unclear, making it difficult to predict future changes in soil nitrification. Herein, we synthesize 68 field studies around the world to evaluate the impacts of N loading on soil ammonia oxidizers and nitrification. Across a wide range of biotic and abiotic factors, climate is the most important driver of the responses of AOA:AOB to N loading. Climate does not directly affect the N-stimulation of nitrification, but does so via climate-related shifts in AOA:AOB. Specifically, climate modulates the responses of AOA:AOB to N loading by affecting soil pH, N-availability and moisture. AOB play a dominant role in affecting nitrification in dry climates, while the impacts from AOA can exceed AOB in humid climates. Together, these results suggest that climate-related shifts in soil ammonia-oxidizing community maintain the N-stimulation of nitrification, highlighting the importance of microbial community composition in mediating the responses of the soil N cycle to N loading.

Elaborations of the influencing factors on the formation of secondary inorganic aerosols in a heavily polluted urban area of China.

In this study, online water-soluble inorganic ions were detected to deduce the formation mechanism of secondary inorganic aerosol in Xianyang, China during wintertime. The dominant inorganic ions of sulfate (SO42-), nitrate (NO3-), and ammonium (NH4+) (the sum of those is abbreviated as SNA) accounted for 17%, 21%, and 12% of PM2.5 mass, respectively. While the air quality deteriorated from excellent to poor grades, the precursor gas sulfur dioxide (SO2) of SO42- increased and then decreased with a fluctuation, while nitrogen dioxide (NO2) and ammonia (NH3), precursors of NO3- and NH4+, and SNA show increasing trends. Meteorological factors including boundary layer height (BLH), temperature, and wind speed also show decline trends, except relative humidity (RH). Meanwhile, the secondary conversion ratio shows a remarkable increasing trend, indicating that there was a strong secondary transformation. From the perspective of chemical mechanisms, RH is positively correlated with sulfur oxidation ratios (SOR), nitrogen oxidation ratios (NOR), and ammonia conversion ratios, representing that the increase of humidity could promote the generation of SNA. Notably, SOR and NOR were also positively related to the ammonia. On the one hand, the low wind speed and BLH led to the accumulation of pollutants. On the other hand, the increases of RH and ammonia promoted more formations of SNA and PM2.5. The results advance our identification of the contributors to the haze episodes and assist to establish more efficient emission controls in Xianyang, in addition to other cities with similar emission and geographical characteristics.

On-site airborne pathogen detection for infection risk mitigation.

Human-infecting pathogens that transmit through the air pose a significant threat to public health. As a prominent instance, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the COVID-19 pandemic has affected the world in an unprecedented manner over the past few years. Despite the dissipating pandemic gloom, the lessons we have learned in dealing with pathogen-laden aerosols should be thoroughly reviewed because the airborne transmission risk may have been grossly underestimated. From a bioanalytical chemistry perspective, on-site airborne pathogen detection can be an effective non-pharmaceutic intervention (NPI) strategy, with on-site airborne pathogen detection and early-stage infection risk evaluation reducing the spread of disease and enabling life-saving decisions to be made. In light of this, we summarize the recent advances in highly efficient pathogen-laden aerosol sampling approaches, bioanalytical sensing technologies, and the prospects for airborne pathogen exposure measurement and evidence-based transmission interventions. We also discuss open challenges facing general bioaerosols detection, such as handling complex aerosol samples, improving sensitivity for airborne pathogen quantification, and establishing a risk assessment system with high spatiotemporal resolution for mitigating airborne transmission risks. This review provides a multidisciplinary outlook for future opportunities to improve the on-site airborne pathogen detection techniques, thereby enhancing the preparedness for more on-site bioaerosols measurement scenarios, such as monitoring high-risk pathogens on airplanes, weaponized pathogen aerosols, influenza variants at the workplace, and pollutant correlated with sick building syndromes.