High production of triterpenoids in Yarrowia lipolytica through manipulation of lipid components.

BACKGROUND: Lupeol exhibits novel physiological and pharmacological activities, such as anticancer and immunity-enhancing activities. However, cytotoxicity remains a challenge for triterpenoid overproduction in microbial cell factories. As lipophilic and relatively small molecular compounds, triterpenes are generally secreted into the extracellular space. The effect of increasing triterpene efflux on the synthesis capacity remains unknown. RESULTS: In this study, we developed a strategy to enhance triterpene efflux through manipulation of lipid components in Y. lipolytica by overexpressing the enzyme Δ9-fatty acid desaturase (OLE1) and disturbing phosphatidic acid phosphatase (PAH1) and diacylglycerol kinase (DGK1). By this strategy combined with two-phase fermentation, the highest lupeol production reported to date was achieved, where the titer in the organic phase reached 381.67 mg/L and the total production was 411.72 mg/L in shake flasks, exhibiting a 33.20-fold improvement over the initial strain. Lipid manipulation led to a twofold increase in the unsaturated fatty acid (UFA) content, up to 61-73%, and an exceptionally elongated cell morphology, which might have been caused by enhanced membrane phospholipid biosynthesis flux. Both phenotypes accelerated the export of toxic products to the extracellular space and ultimately stimulated the capacity for triterpenoid synthesis, which was proven by the 5.11-fold higher ratio of extra/intracellular lupeol concentrations, 2.79-fold higher biomass accumulation and 2.56-fold higher lupeol productivity per unit OD in the modified strains. This strategy was also highly efficient for the biosynthesis of other triterpenes and sesquiterpenes, including α-amyrin, ß-amyrin, longifolene, longipinene and longicyclene. CONCLUSIONS: In conclusion, we successfully created a high-yield lupeol-producing strain via lipid manipulation. We demonstrated that the enhancement of lupeol efflux and synthesis capacity was induced by the increased UFA content and elongated cell morphology. Our study provides a novel strategy to promote the biosynthesis of valuable but toxic products in microbial cell factories.

Boosting the biosynthesis of betulinic acid and related triterpenoids in Yarrowia lipolytica via multimodular metabolic engineering.

BACKGROUND: Betulinic acid is a pentacyclic lupane-type triterpenoid and a potential antiviral and antitumor drug, but the amount of betulinic acid in plants is low and cannot meet the demand for this compound. Yarrowia lipolytica, as an oleaginous yeast, is a promising microbial cell factory for the production of highly hydrophobic compounds due to the ability of this organism to accumulate large amounts of lipids that can store hydrophobic products and supply sufficient precursors for terpene synthesis. However, engineering for the heterologous production of betulinic acid and related triterpenoids has not developed as systematically as that for the production of other terpenoids, thus the production of betulinic acid in microbes remains unsatisfactory. RESULTS: In this study, we applied a multimodular strategy to systematically improve the biosynthesis of betulinic acid and related triterpenoids in Y. lipolytica by engineering four functional modules, namely, the heterogenous CYP/CPR, MVA, acetyl-CoA generation, and redox cofactor supply modules. First, by screening 25 combinations of cytochrome P450 monooxygenases (CYPs) and NADPH-cytochrome P450 reductases (CPRs), each of which originated from 5 different sources, we selected two optimal betulinic acid-producing strains. Then, ERG1, ERG9, and HMG1 in the MVA module were overexpressed in the two strains, which dramatically increased betulinic acid production and resulted in a strain (YLJCC56) that exhibited the highest betulinic acid yield of 51.87 ± 2.77 mg/L. Then, we engineered the redox cofactor supply module by introducing NADPH- or NADH-generating enzymes and the acetyl-CoA generation module by directly overexpressing acetyl-CoA synthases or reinforcing the ß-oxidation pathway, which further increased the total triterpenoid yield (the sum of the betulin, betulinic acid, betulinic aldehyde yields). Finally, we engineered these modules in combination, and the total triterpenoid yield reached 204.89 ± 11.56 mg/L (composed of 65.44% betulin, 23.71% betulinic acid and 10.85% betulinic aldehyde) in shake flask cultures. CONCLUSIONS: Here, we systematically engineered Y. lipolytica and achieved, to the best of our knowledge, the highest betulinic acid and total triterpenoid yields reported in microbes. Our study provides a suitable reference for studies on heterologous exploitation of P450 enzymes and manipulation of triterpenoid production in Y. lipolytica.

Author Correction: Precise control of SCRaMbLE in synthetic haploid and diploid yeast.

The original version of this Article omitted a declaration from the Competing Interests statement, which should have included the following: 'J.D.B. is a founder and Director of the following: Neochromosome, Inc., the Center of Excellence for Engineering Biology, and CDI Labs, Inc. and serves on the Scientific Advisory Board of the following: Modern Meadow, Inc., Recombinetics, Inc., and Sample6, Inc.'. This has now been corrected in both the PDF and HTML versions of the Article.

Modular engineering to increase intracellular NAD(H/+) promotes rate of extracellular electron transfer of Shewanella oneidensis.

The slow rate of extracellular electron transfer (EET) of electroactive microorganisms remains a primary bottleneck that restricts the practical applications of bioelectrochemical systems. Intracellular NAD(H/+) (i.e., the total level of NADH and NAD+) is a crucial source of the intracellular electron pool from which intracellular electrons are transferred to extracellular electron acceptors via EET pathways. However, how the total level of intracellular NAD(H/+) impacts the EET rate in Shewanella oneidensis has not been established. Here, we use a modular synthetic biology strategy to redirect metabolic flux towards NAD+ biosynthesis via three modules: de novo, salvage, and universal biosynthesis modules in S. oneidensis MR-1. The results demonstrate that an increase in intracellular NAD(H/+) results in the transfer of more electrons from the increased oxidation of the electron donor to the EET pathways of S. oneidensis, thereby enhancing intracellular electron flux and the EET rate.

Precise control of SCRaMbLE in synthetic haploid and diploid yeast.

Compatibility between host cells and heterologous pathways is a challenge for constructing organisms with high productivity or gain of function. Designer yeast cells incorporating the Synthetic Chromosome Rearrangement and Modification by LoxP-mediated Evolution (SCRaMbLE) system provide a platform for generating genotype diversity. Here we construct a genetic AND gate to enable precise control of the SCRaMbLE method to generate synthetic haploid and diploid yeast with desired phenotypes. The yield of carotenoids is increased to 1.5-fold by SCRaMbLEing haploid strains and we determine that the deletion of YEL013W is responsible for the increase. Based on the SCRaMbLEing in diploid strains, we develop a strategy called Multiplex SCRaMbLE Iterative Cycling (MuSIC) to increase the production of carotenoids up to 38.8-fold through 5 iterative cycles of SCRaMbLE. This strategy is potentially a powerful tool for increasing the production of bio-based chemicals and for mining deep knowledge.

Gene repression via multiplex gRNA strategy in Y. lipolytica.

BACKGROUND: The oleaginous yeast Yarrowia lipolytica is a promising microbial cell factory due to their biochemical characteristics and native capacity to accumulate lipid-based chemicals. To create heterogenous biosynthesis pathway and manipulate metabolic flux in Y. lipolytica, numerous studies have been done for developing synthetic biology tools for gene regulation. CRISPR interference (CRISPRi), as an emerging technology, has been applied for specifically repressing genes of interest. RESULTS: In this study, we established CRISPRi systems in Y. lipolytica based on four different repressors, that was DNase-deactivated Cpf1 (dCpf1) from Francisella novicida, deactivated Cas9 (dCas9) from Streptococcus pyogenes, and two fusion proteins (dCpf1-KRAB and dCas9-KRAB). Ten gRNAs that bound to different regions of gfp gene were designed and the results indicated that there was no clear correlation between the repression efficiency and targeting sites no matter which repressor protein was used. In order to rapidly yield strong gene repression, a multiplex gRNAs strategy based on one-step Golden-brick assembly technology was developed. High repression efficiency 85% (dCpf1) and 92% (dCas9) were achieved in a short time by making three different gRNAs towards gfp gene simultaneously, which avoided the need of screening effective gRNA loci in advance. Moreover, two genes interference including gfp and vioE and three genes repression including vioA, vioB and vioE in protodeoxy-violaceinic acid pathway were also realized. CONCLUSION: Taken together, successful CRISPRi-mediated regulation of gene expression via four different repressors dCpf1, dCas9, dCpf1-KRAB and dCas9-KRAB in Y. lipolytica is achieved. And we demonstrate a multiplexed gRNA targeting strategy can efficiently achieve transcriptional simultaneous repression of several targeted genes and different sites of one gene using the one-step Golden-brick assembly. This timesaving method promised to be a potent transformative tool valuable for metabolic engineering, synthetic biology, and functional genomic studies of Y. lipolytica.

Heterologous biosynthesis and manipulation of alkanes in Escherichia coli.

Biosynthesis of alkanes in microbial foundries offers a sustainable and green supplement to traditional fossil fuels. The dynamic equilibrium of fatty aldehydes, key intermediates, played a critical role in microbial alkanes production, due to the poor catalytic capability of aldehyde deformylating oxygenase (ADO). In our study, exploration of competitive pathway together with multi-modular optimization was utilized to improve fatty aldehydes balance and consequently enhance alkanes formation in Escherichia coli. Endogenous fatty alcohol formation was supposed to be competitive with alkane production, since both of the two routes consumed the same intermediate-fatty aldehyde. Nevertheless, in our case, alkanes production in E. coli was enhanced from trace amount to 58.8mg/L by the facilitation of moderate fatty alcohol biosynthesis, which was validated by deletion of endogenous aldehyde reductase (AHR), overexpression of fatty alcohol oxidase (FAO) and consequent transcriptional assay of aar, ado and adhP genes. Moreover, alkanes production was further improved to 81.8mg/L, 86.6mg/L or 101.7mg/L by manipulation of fatty acid biosynthesis, lipids degradation or electron transfer system modules, which directly referenced to fatty aldehydes dynamic pools. A titer of 1.31g/L alkanes was achieved in 2.5L fed-batch fermentation, which was the highest reported titer in E. coli. Our research has offered a reference for chemical overproduction in microbial cell factories facilitated by exploring competitive pathway.

Engineering Saccharomyces cerevisiae to produce odd chain-length fatty alcohols.

Fatty aldehydes and alcohols are valuable precursors used in the industrial manufacturing of a myriad of specialty products. Herein, we demonstrate the de novo production of odd chain-length fatty aldehydes and fatty alcohols in Saccharomyces cerevisiae by expressing a novel biosynthetic pathway involving cytosolic thioesterase, rice α-dioxygenase and endogenous aldehyde reductases. We attained production titers of ∼20 mg/l fatty aldehydes and ∼20 mg/l fatty alcohols in shake flask cultures after 48 and 60 h respectively without extensive fine-tuning of metabolic fluxes. In contrast to prior studies which relied on bi-functional fatty acyl-CoA reductase to produce even chain-length fatty alcohols, our biosynthetic route exploits α-oxidation reaction to produce odd chain-length fatty aldehyde intermediates without using NAD(P)H cofactor, thereby conserving cellular resource during the overall synthesis of odd chain-length fatty alcohols. The biosynthetic pathway presented in this study has the potential to enable sustainable and efficient synthesis of fatty acid-derived chemicals from processed biomass.

Biosynthesis of odd-chain fatty alcohols in Escherichia coli.

Engineered microbes offer the opportunity to design and implement artificial molecular pathways for renewable production of tailored chemical commodities. Targeted biosynthesis of odd-chain fatty alcohols is very challenging in microbe, due to the specificity of fatty acids synthase for two-carbon unit elongation. Here, we developed a novel strategy to directly tailor carbon number in fatty aldehydes formation step by incorporating α-dioxygenase (αDOX) from Oryza sativa (rice) into Escherichia coli αDOX oxidizes Cn fatty acids (even-chain) to form Cn-1 fatty aldehydes (odd-chain). Through combining αDOX with fatty acyl-acyl carrier protein (-ACP) thioesterase (TE) and aldehyde reductase (AHR), the medium odd-chain fatty alcohols profile (C11, C13, C15) was firstly established in E. coli. Also, medium even-chain alkanes (C12, C14) were obtained by substitution of AHR to aldehyde decarbonylase (AD). The titer of odd-chain fatty alcohols was improved from 7.4mg/L to 101.5mg/L in tube cultivation by means of fine-tuning endogenous fatty acyl-ACP TE (TesA'), αDOX, AHRs and the genes involved in fatty acids metabolism pathway. Through high cell density fed-batch fermentation, a titer of 1.95g/L odd-chain fatty alcohols was achieved, which was the highest reported titer in E. coli. Our system has greatly expanded the current microbial fatty alcohols profile that provides a new brand solution for producing complex and desired molecules in microbes.

Engineering quorum sensing signaling of Pseudomonas for enhanced wastewater treatment and electricity harvest: A review.

Cell-cell communication that enables synchronized population behaviors in microbial communities dictates various biological processes. It is of great interest to unveil the underlying mechanisms of fine-tuning cell-cell communication to achieve environmental and energy applications. Pseudomonas is a ubiquitous microbe in environments that had wide applications in bioremediation and bioenergy generation. The quorum sensing (QS, a generic cell-cell communication mechanism) systems of Pseudomonas underlie the aromatics biodegradation, denitrification and electricity harvest. Here, we reviewed the recent progresses of the genetic strategies in engineering QS circuits to improve efficiency of wastewater treatment and the performance of microbial fuel cells.

[Treatment of mandibular first premolars with complex root canals: report of 2 cases].

Mandibular first premolars have complex root canals. Double root canals and three root canals usually happen. Clinicians should be aware of the normal anatomy of root canal system and vigilant about the possibility of canal variation. In this paper, two cases of mandibular first premolars with double (2-2,Verlucci) and three(1-3,Verlucci) root canals were reported. The root canal type and its incidence were discussed. Clinicians should carefully explore to confirm the existence of variation and avoid missed canals, which are necessary for a successful root canal therapy.

[Study on the correlation of epidermal growth factor and Sjoigren's syndrome with atrophic glossitis].

PURPOSE: To investigate the correlation between epidermal growth factor (EFG) and atrophic glossitis (AG) in patients with Sjoigren's syndromes (SS) and explore its pathogenesis. METHODS: Ninety-three patients with SS (60 with AG and 33 without AG) and 20 normal were selected. The concentrations of EGF in saliva were analyzed by ELISA. The expressions of EGF receptor (EGFR) in the epithelial cells of the tongue were assayed by immunohistochemistry. The differences among each group were analyzed with SPSS19.0 software package. RESULTS: The saliva EGF concentrations in SS was lower than that in normal control group(P<0.0001),and EGF concentrations in SS with AG was significantly lower than that in SS without AG (P=0.024). EGF levels in saliva gradually decreased in the mild, moderate and severe atrophic glossitis groups, and there were significant differences among each group(P<0.05). EGFR in the epithelial cells of tongue was lower in SS with moderate and severe AG than in the control group(P=0.009, P=0.037), and there was a significant correlation between EGF and the degree of AG (r=-0.673, P<0.01). CONCLUSIONS: Saliva EGF concentrations decrease significantly in patients with SS and it is closely related to the morbidity of atrophic glossitis.

[Effect of infiltration technique and polishing on the roughness of artificial carious enamel surfaces].

PURPOSE: To study the surface roughness of early carious lesions which were treated with resin infiltration and polished with different materials, and to provide reference for selection of appropriate polishing system. METHODS: Fifty-four labial surface specimens of mandibular incisors were created out of bovine teeth. They were randomly divided into 6 groups. One group was sound enamel group. Another group was early enamel carious group. Other specimens were treated with a partially saturated acidic buffer solution for preparation of initial artificial enamel caries. These initial artificial enamel caries were treated with resin infiltration. Then they were randomly divided into 4 groups according to polishing or not and type of polishing tool (rubber cups, polishing discs, HiLuster polishers). The surface roughness of specimens in all groups were measured with Form Talysurf PGI 800. Arithmetical mean deviation of the assessed profile (Ra) and the maximum height of the profile(Rz) were used as measurement parameter. SPSS 17.0 software package was used for data analysis. RESULTS: Comparison of sound enamel surfaces and early carious surfaces revealed no significant difference in surface roughness(P>0.05), but the mean value of the latter one was higher. After infiltration, the roughness of surfaces without polishing was significantly higher than that of early carious surfaces(P<0.05). After infiltration and polishing with different tools, there was no significant difference in surface roughness of every two groups (P>0.05). The roughness of polishing groups after infiltration was significantly smaller than that of group without polished after infiltration (P<0.05). Comparison of polishing surfaces after infiltration and early carious surfaces revealed no significant difference in surface roughness (P>0.05). CONCLUSIONS: After early caries being treated with infiltration technique, the roughness of teeth surfaces increases significantly. Those surfaces should be polished. Rubber cup and polishing discs with smaller granularity are more effective and reasonable as the surface polishing materials.

Comparison of the secondary metabolites in two scales of cephalosporin C (CPC) fermentation and two different post-treatment processes.

Cephalosporin C (CPC) is the precursor of a class of antibiotics that were more effective than traditional penicillins. CPC production is performed mainly through fermentation by Acremonium chrysogenum, whose secondary metabolism was sensitive to the environmental changes. In the present work, secondary metabolites were measured by ion-pair reversed-phase liquid chromatography tandemed with hybrid quadrupole time-of-flight mass spectrometry, and the disparity of them from two scales of CPC fermentations (pilot and industrial) and also two different post-treatment processes (oxalic acid and formaldehyde added and control) were investigated. When fermentation size was enlarged from pilot scale (50 l) to industrial scale (156,000 l), the remarkable disparities of concentrations and changing trends of the secondary metabolites in A. chrysogenum were observed, which indicated that the productivity of CPC biosynthesis was higher in the large scale of fermentation. Three environmental factors were measured, and the potential reasons that might cause the differences were analyzed. In the post-treatment process after industrial fermentation, the changes of these secondary metabolites in the tank where oxalic acid and formaldehyde were added were much less than the control tank where none was added. This indicated that the quality of the final product was more stable after the oxalic acid and formaldehyde were added in the post-treatment process. These findings provided new insight into industrial CPC production.

Comparison of the secondary metabolites in Penicillium chrysogenum between pilot and industrial penicillin G fermentations.

The disparity of secondary metabolites in Penicillium chrysogenum between two scales of penicillin G fermentation (50 L as pilot process and 150,000 L as industrial one) was investigated by ion-pair reversed-phase liquid chromatography tandemed with hybrid quadrupole time-of-flight mass spectrometry. In industrial process, the pools of intracellular L-α-aminoadipyl-L-cysteinyl-D-valine (LLD-ACV) and isopenicillin N (IPN) were remarkably less than that in the pilot one, which indicated that the productivity of penicillin G might be higher in the large scale of fermentation. This conclusion was supported by the higher intracellular penicillin G concentration as well as its higher yield per unit biomass in industrial cultivation. The different changing tendencies of IPN, 6-aminopenicillanic acid and 6-oxopiperide-2-carboxylic acid between two processes also suggested the same conclusion. The higher content of intracellular LLD-ACV in pilot process lead to a similarly higher concentration of bis-δ-(L-α-aminoadipyl)-L-cysteinyl-D-valine, which had an inhibitory effect on ACV synthetase and also subdued the activity of IPN synthetase. The interconversion of secondary metabolites and the influence they put on enzymes would intensify the discrepancy between two fermentations more largely. These findings provided new insight into the changes and regulation of secondary metabolites in P. chrysogenum under different fermentation sizes.