Functional responses of two species of predatory mites (Acari: Phytoseiidae) to eggs and first-instar nymphs of Bactericera Gobica Logniova (Homoptera: Psyllidae).

The goji berry psyllid, Bactericera gobica Logniova (Homoptera: Psyllidae), is one of the most important pests on goji berry plants (Lycium barbarum L.), whose fruits are widely used in traditional Chinese medicine and food. However, chemical control is still the predominant control strategy of this pest. Recently, two species of predatory mites, Neoseiulus setarius Ma, Meng & Fan and Neoseiulus barkeri Hughes were found to be associated with B. gobica in China. To assess their predation potential against B. gobica, the functional responses of these two phytoseiid species feeding on different densities (2, 4, 8, 12, 16, 24 and 32 individuals) of B. gobica eggs and 1st instar nymphs were compared at a temperature of 25ºC ± 1º C. Logistic regression analysis revealed that both predatory mite species exhibited type Holling-II functional responses on eggs and 1st instar nymphs of B. gobica, with the predation number increased for both predators as the density of prey increased. Overall, N. setarius consumed more prey compared to N. barkeri across all levels of prey densities. Meanwhile, the highest attack rate (α = 0.0283), the lowest handling time (Th = 1.1324 h prey- 1), and the highest estimated maximum predation rate (T/Th = 21.19 prey day- 1) were all observed for N. setarius fed with 1st instar nymphs of B. gobica. These findings suggest that it is worthy considering utilizing N. setarius and N. barkeri as candidate biocontrol agents of B. gobica, with N. setarius appearing to be a more effective predator than N. barkeri.

Nanoscale triboelectrification gated transistor.

Tribotronics has attracted great attention owing to the demonstrated triboelectrification-controlled electronics and established direct modulation mechanism by external mechanical stimuli. Here, a nanoscale triboelectrification-gated transistor has been studied with contact-mode atomic force microscopy and scanning Kevin probe microscopy. The detailed working principle was analyzed at first, in which the nanoscale triboelectrification can tune the carrier transport in the transistor. Then with the manipulated nanoscale triboelectrification, the effects of contact force, scan speed, contact cycles, contact region and charge diffusion on the transistor were investigated, respectively. Moreover, the manipulated nanoscale triboelectrification serving as a rewritable floating gate has demonstrated different modulation effects by an applied tip voltage. This work has realized the nanoscale triboelectric modulation on electronics, which could provide a deep understanding for the theoretical mechanism of tribotronics and may have great applications in nanoscale transistor, micro/nano-electronic circuit and nano-electromechanical system.

Triboelectric effect-modulated varifocal liquid lens.

Electrically modulated varifocal liquid lenses, which are usually modulated by an external high voltage power source, have attracted much attention due to their bright application prospects in artificial optical systems. Here, a triboelectric nanogenerator (TENG)-based varifocal liquid lens (TVLL) has been demonstrated, in which the focal length can be directly modulated by external mechanical sliding. A dielectrophoretic force is generated by the TENG through the transfer of triboelectric charges in the asymmetric electrodes, which is used to continuously change the shape of the air-liquid interface between concave and convex without any complicated boost converter. Moreover, a triboelectric magnifying glass based on the accurate modulation effect of the TVLL on a light beam has been demonstrated. In this work, the TENG is used as a medium to modulate and accurately control the focal length of the liquid lens by an external mechanical stimulus, which may have great applications in micro-optical-electro-mechanical systems (MOEMS), human-machine interaction, artificial vision systems, etc.

Adipokine Chemerin Stimulates Progression of Atherosclerosis in ApoE-/- Mice.

BACKGROUND: Vascular remodeling is the most critical pathogenesis of atherosclerosis. Adipokine chemerin was known for its relationship with obesity as well as metabolism. Most recently, chemerin was found to play a crucial role in the pathologic process of cardiovascular diseases including coronary heart disease. In this study, we surveyed the role of chemerin in progression of atherosclerosis in ApoE-/- mice. OBJECTIVE: To investigate the relationship between chemerin and progression of atherosclerosis in ApoE-/- mice and its mechanism. METHODS: 8-week-old ApoE-/- mice were fed with high-fat diet to induce the atherosclerosis model. Adenoviruses were transfected for knockdown or overexpression of chemerin gene into aorta. Serums and aortic tissues of ApoE-/- mice were obtained after feeding high-fat diet for 16 weeks. HE staining and oil red staining were performed to evaluate aortic plaque. ELISA was performed to explore serum levels of tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), and transforming growth factor-ß1 (TGF-ß1). Real-time PCR and western blotting were carried out to investigate the mRNA and protein levels of chemerin, nuclear factor-κB p65 (NF-κBp65), proliferating cell nuclear antigen (PCNA), phosphorylated p38 mitogen-activated protein kinase (p-p38-MAPK), phosphorylated c-Jun N-terminal kinase (p-JNK), and phosphorylated extracellular signal regulated kinase 1/2 (p-ERK 1/2). RESULT: Aortic plaque formation was significantly induced by high-fat diet in ApoE-/- mice. Simultaneously, elevated serum levels of TNF-α and IL-1ß and elevated mRNA and protein levels of chemerin, NF-κBp65, PCNA, p-p38-MAPK, p-JNK, and p-ERK 1/2 were found in ApoE-/- mice. After aortic chemerin gene was inhibited by adenovirus, aortic atherosclerosis induced by high-fat diet was significantly meliorated, serum levels of TNF-α and IL-1ß decreased, mRNA and protein levels of NF-κBp65, PCNA, p-p38-MAPK, p-JNK, and p-ERK 1/2 decreased simultaneously. CONCLUSION: Our study revealed that chemerin stimulated the progression of atherosclerosis in ApoE-/- mice.

Study on the Changes of Structures and Properties of PAN Fibers during the Cyclic Reaction in Supercritical Carbon Dioxide.

Thermal pre-oxidation of polyacrylonitrile (PAN) fibers is a time-consuming and energy-consuming step in the production of PAN-based carbon fibers. In this paper, the effect of temperature on the structures and properties of PAN fibers cyclized in the supercritical carbon dioxide (Sc-CO2) medium was studied. The thermal behaviors of the PAN fibers were investigated by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The cyclization reaction was sensitive to the heating temperature and gas atmosphere. The FT-IR results of the PAN fibers treated in the Sc-CO2 confirmed that the degree of cyclization increased with the increase of the cyclization temperature. Compared with the PAN fibers treated in the air, the PAN fibers treated in the Sc-CO2 showed a higher degree of cyclization even at the same temperature. These findings might be related to the osmotic action of Sc-CO2 causing the fibers to be further arranged in a regular manner, which was favorable for the cyclization reaction. Moreover, as one kind of high diffusion and high heat transfer media, the heat release during the cyclization of PAN fibers could be quickly removed by Sc-CO2, which achieved the progress of the rapid-entry cyclization reaction.

Effect of Different Pressures of Supercritical Carbon Dioxide on the Microstructure of PAN Fibers during the Hot-Drawing Process.

The hot-drawing process of polyacrylonitrile (PAN) fibers is an important step during the production of PAN-based carbon fibers. In this study, supercritical carbon dioxide (Sc-CO2) was used as one kind of media for thermal stretching of PAN fibers to study the effect of different pressures of Sc-CO2 on crystallinity, degree of orientation and mechanical property of PAN fibers during the hot-drawing process. The changes of microstructure and mechanical properties in the PAN fibers were investigated by wide-angle X-ray diffraction, small angle X-ray scattering and monofilament strength analysis. The results showed that as the pressure increased, the crystallinity and degree of orientation of PAN fibers increased. Furthermore, when the pressure was 10 MPa, the crystallinity increased from 69.78% to 79.99%, which was the maximum crystallinity among the different pressures. However, when the pressure was further increased, the crystallinity and degree of orientation of the fibers were reduced. The test results of the mechanical properties were consistent with the trends of crystallinity and degree of orientation, showing that when the pressure was 10 MPa, the tensile strength of the fibers increased from 4.59 cN·dtex-1 to 7.06 cN·dtex-1 and the modulus increased from 101.54 cN·dtex-1 to 129.55 cN·dtex-1.

Water-evaporation-induced electricity with nanostructured carbon materials.

Water evaporation is a ubiquitous natural process that harvests thermal energy from the ambient environment. It has previously been utilized in a number of applications including the synthesis of nanostructures and the creation of energy-harvesting devices. Here, we show that water evaporation from the surface of a variety of nanostructured carbon materials can be used to generate electricity. We find that evaporation from centimetre-sized carbon black sheets can reliably generate sustained voltages of up to 1 V under ambient conditions. The interaction between the water molecules and the carbon layers and moreover evaporation-induced water flow within the porous carbon sheets are thought to be key to the voltage generation. This approach to electricity generation is related to the traditional streaming potential, which relies on driving ionic solutions through narrow gaps, and the recently reported method of moving ionic solutions across graphene surfaces, but as it exploits the natural process of evaporation and uses cheap carbon black it could offer advantages in the development of practical devices.

Aligned Growth of Hexagonal Boron Nitride Monolayer on Germanium.

A hexagonal boron nitride monolayer with aligned orientations is grown on reusable semiconducting germanium. The number of primary orientations of the h-BN domains depends on the symmetry of the underlying crystal face, and Ge (110) gives rise to only two opposite orientations. The structures and electrical properties of grain boundaries between h-BN domains with opposite orientations are also systematically analyzed.

Three-tier rough superhydrophobic surfaces.

A three-tier rough superhydrophobic surface was fabricated by growing hydrophobic modified (fluorinated silane) zinc oxide (ZnO)/copper oxide (CuO) hetero-hierarchical structures on silicon (Si) micro-pillar arrays. Compared with the other three control samples with a less rough tier, the three-tier surface exhibits the best water repellency with the largest contact angle 161° and the lowest sliding angle 0.5°. It also shows a robust Cassie state which enables the water to flow with a speed over 2 m s(-1). In addition, it could prevent itself from being wetted by the droplet with low surface tension (mixed water and ethanol 1:1 in volume) which reveals a flow speed of 0.6 m s(-1) (dropped from the height of 2 cm). All these features prove that adding another rough tier on a two-tier rough surface could futher improve its water-repellent properties.

[Soluble expression and activity evaluation of SDF-1/54R, a specific antagonist of CXCR7].

OBJECTIVE: To construct a soluble prokaryotic expression vector of the CXCR7-specific antagonist SDF-1/54R and evaluate its activity. METHODS: SDF-1/54r gene amplified by PCR was inserted into the soluble expression vector pET-41a+ engineered with GST fusion tag, and the recombinant vector was transformed into E. coli strain BL21 (DE3). After IPTG induction of E. coli, the expressed recombinant protein was purified with GST affinity chromatography purification system and confirmed by SDS-PAGE and Western blotting assay. The target protein SDF-1/54R was obtained after digestion of the purified product with enterokinase. Breast cancer MCF-7 cells with high expression of CXCR7 was treated with SDF-1/54R and the cell proliferation and metastasis was evaluated with MTT and chemotaxis assays. RESULTS: The target protein SDF-1/54R obtained showed an obvious inhibitory effect on the proliferation and metastasis of MCF-7 cells as confirmed by MTT and chemotaxis assays. CONCLUSION: SDF-1/54R is a good antagonist of CXCR7 and shows a potential value as an effective anti-cancer agent.

Fiber-based all-solid-state flexible supercapacitors for self-powered systems.

All-solid-state flexible supercapacitors based on a carbon/MnO(2) (C/M) core-shell fiber structure were fabricated with high electrochemical performance such as high rate capability with a scan rate up to 20 V s(-1), high volume capacitance of 2.5 F cm(-3), and an energy density of 2.2 × 10(-4) Wh cm(-3). By integrating with a triboelectric generator, supercapacitors could be charged and power commercial electronic devices, such as a liquid crystal display or a light-emitting-diode, demonstrating feasibility as an efficient storage component and self-powered micro/nanosystems.