Optimization of Cohesive Parameters in the Interfacial Transition Zone of Rubberized Concrete Based on the Response Surface Method.

Rubber concrete has been applied to a certain extent in fatigue-resistant structures due to its good durability. Based on a cohesive model of rubber composed of a five-phase material containing mortar, aggregate, rubber, aggregate-mortar interfacial transition zone (ITZ), and rubber-mortar ITZ, this paper studies the influence of the cohesive parameters in the rubber-mortar ITZ on the fatigue problem of rubber concrete on the mesoscopic scale. As the weak part of cement-based composite materials, the ITZ has a great influence on the mechanical properties and durability of concrete, but the performance of the ITZ is difficult to test in macro experiments, resulting in difficulties in determining its simulation parameters. Based on the cohesive model with a rubber content of 5%, this study uses Monofactor analysis and the Plackett-Burman test to quickly and effectively determine the primary and secondary influences of the cohesive model parameters in the rubber-mortar ITZ; further, the response surface method is used to optimize the cohesive parameters in the rubber-mortar ITZ, and the numerical simulation results after optimizing the cohesive parameters are compared and analyzed with the simulation results before optimization. The results show that, under the setting of the optimized parameters, the simulation results of each item of the optimal cohesive model parameters in the rubber-mortar ITZ are in line with the reality and closer to the experimental data, and they are also applicable to rubber concrete models with different rubber dosing.

High performance mechano-optoelectronic molecular switch.

Highly-efficient molecular photoswitching occurs ex-situ but not to-date inside electronic devices due to quenching of excited states by background interactions. Here we achieve fully reversible in-situ mechano-optoelectronic switching in self-assembled monolayers (SAMs) of tetraphenylethylene molecules by bending their supporting electrodes to maximize aggregation-induced emission (AIE). We obtain stable, reversible switching across >1600 on/off cycles with large on/off ratio of (3.8 ± 0.1) × 103 and 140 ± 10 ms switching time which is 10-100× faster than other approaches. Multimodal characterization shows mechanically-controlled emission with UV-light enhancing the Coulomb interaction between the electrons and holes resulting in giant enhancement of molecular conductance. The best mechano-optoelectronic switching occurs in the most concave architecture that reduces ambient single-molecule conformational entropy creating artificially-tightened supramolecular assemblies. The performance can be further improved to achieve ultra-high switching ratio on the order of 105 using tetraphenylethylene derivatives with more AIE-active sites. Our results promise new applications from optimized interplay between mechanical force and optics in soft electronics.

Supramolecular Memristor Based on Bistable [2]Catenanes: Toward High-Density and Non-Volatile Memory Devices.

The ever-increasing demand for data storage and neuromorphic computing calls for innovative, high-density solutions, such as resistive random-access memory (RRAM). However, the integration of resistive switching and rectification at the nanoscale remains a formidable challenge. In this study, we introduce a bistable [2]catenane-based supramolecular junction that simultaneously functions as a resistive switch and a diode. All supramolecular junctions are highly stable and reproducible over thousands of resistive switching cycles, because the nano-confinement of two mechanically interlocked rings can stabilize the radical states of pyridinium moieties under ambient conditions. The successful realization of supramolecular junctions in functionality with a thickness of approximately 2 nm presents a promising avenue for the development of molecule-scale based RRAM for a better solution to high density and energy efficiency.

Numerical Simulation of the Effect of Freeze-Thaw Cycles on the Axial Compression Strength of Rubber Concrete.

The incorporation of rubber can enhance concrete's durability and effectively reduce the damage caused by freeze-thaw cycling (FTC). Still, there has been only limited research on the damage mechanism of RC at the fine view level. To gain insight into the expansion process of uniaxial compression damage cracks in rubber concrete (RC) and summarize the internal temperature field distribution law during FTC, a fine RC thermodynamic model containing mortar, aggregate, rubber, water, and interfacial transition zone (ITZ) is established in this paper, and the cohesive element is selected for the ITZ part. The model can be used to study the mechanical properties of concrete before and after FTC. The validity of the calculation method was verified by comparing the calculated results of the compressive strength of concrete before and after FTC with the experimental results. On this basis, this study analyzed the compressive crack extension and internal temperature distribution of RC at 0, 5, 10, and 15% replacement rates before and after 0, 50, 100, and 150 cycles of FTC. The results showed that the fine-scale numerical simulation method can effectively reflect the mechanical properties of RC before and after FTC, and the computational results verify the applicability of the method to rubber concrete. The model can effectively reflect the uniaxial compression cracking pattern of RC before and after FTC. Incorporating rubber can impede temperature transfer and reduce the compressive strength loss caused by FTC in concrete. The FTC damage to RC can be reduced to a greater extent when the rubber incorporation is 10%.

Numerical Simulation of Fatigue Life of Rubber Concrete on the Mesoscale.

Rubber concrete (RC) exhibits high durability due to the rubber admixture. It is widely used in a large number of fatigue-resistant structures. Mesoscale studies are used to study the composition of polymers, but there is no method for fatigue simulation of RC. Therefore, this paper presents a finite element modeling approach to study the fatigue problem of RC on the mesoscale, which includes the random generation of the main components of the RC mesoscale structure. We also model the interfacial transition zone (ITZ) of aggregate mortar and the ITZ of rubber mortar. This paper combines the theory of concrete damage to plastic with the method of zero-thickness cohesive elements in the ITZ, and it is a new numerical approach. The results show that the model can simulate reasonably well the random damage pattern after RC beam load damage. The damage occurred in the middle of the beam span and tended to follow the ITZ. The model can predict the fatigue life of RC under various loads.

MStoCIRC: A powerful tool for downstream analysis of MS/MS data to predict translatable circRNAs.

CircRNAs are formed by a non-canonical splicing method and appear circular in nature. CircRNAs are widely distributed in organisms and have the features of time- and tissue-specific expressions. CircRNAs have attracted increasing interest from scientists because of their non-negligible effects on the growth and development of organisms. The translation capability of circRNAs is a novel and valuable direction in the functional research of circRNAs. To explore the translation potential of circRNAs, some progress has been made in both experimental identification and computational prediction. For computational prediction, both CircCode and CircPro are ribosome profiling-based software applications for predicting translatable circRNAs, and the online databases riboCIRC and TransCirc analyze as many pieces of evidence as possible and list the predicted translatable circRNAs of high confidence. Simultaneously, mass spectrometry in proteomics is often recognized as an efficient method to support the identification of protein and peptide sequences from diverse complex templates. However, few applications fully utilize mass spectrometry to predict translatable circRNAs. Therefore, this research aims to build up a scientific analysis pipeline with two salient features: 1) it starts with the data analysis of raw tandem mass spectrometry data; and 2) it also incorporates other translation evidence such as IRES. The pipeline has been packaged into an analysis tool called mass spectrometry to translatable circRNAs (MStoCIRC). MStoCIRC is mainly implemented by Python3 language programming and could be downloaded from GitHub (https://github.com/QUMU00/mstocirc-master). The tool contains a main program and several small, independent function modules, making it more multifunctional. MStoCIRC can process data efficiently and has obtained hundreds of translatable circRNAs in humans and Arabidopsis thaliana.

Mobile CRISPR-Cas9 based anti-phage system in E. coli.

Escherichia coli is one of the most important microbial cell factories, but infection by bacteriophages in the environment may have a huge impact on its application in industrial production. Here, we developed a mobile CRISPR-Cas9 based anti-phage system for bacteriophages defense in E. coli. Two conjugative plasmids pGM1 (phosphoglucomutase 1) and pGM2 carrying one and two guide RNAs, respectively, were designed to defend against a filamentous phage. The results showed that the pGM1 and pGM2 could decrease the phage infection rate to 1.6% and 0.2% respectively in infected cells. For preventing phage infection in E. coli, the pGM2 decreased the phage infection rate to 0.1 %, while pGM1 failed to block phage infection. Sequence verification revealed that point mutations in protospacer or protospacer adjacent motif sequences of the phage genome caused loss of the defense function. These results support the potential application of MCBAS in E. coli cell factories to defend against phage infections. Electronic Supplementary Material: Supplementary material is available in the online version of this article at 10.1007/s11705-022-2141-7 and is accessible for authorized users.

Design and Performance Verification of a Space Radiation Detection Sensor Based on Graphene.

In order to verify the performance of a graphene-based space radiation detection sensor, the radiation detection principle based on two-dimensional graphene material was analyzed according to the band structure and electric field effect of graphene. The method of space radiation detection based on graphene was studied and then a new type of space radiation sensor samples with small volume, high resolution, and radiation-resistance was formed. Using protons and electrons, the electrical performance of GFET radiation sensor was verified. The designed graphene space radiation detection sensor is expected to be applied in the radiation environment monitoring of the space station and the moon, and can also achieve technological breakthroughs in pulsar navigation and other fields.

Effect of acupuncture on the cognitive function of migraine patients with depression/anxiety disorder / 中国针灸

OBJECTIVE@#To observe the effect of five-element acupuncture on the cognitive function repair of migraine patients with depression/anxiety disorder.@*METHODS@#The migraine patients with depression/anxiety disorder (19 cases, 5 cases dropped off) were taken as the observation group, and received five-element acupuncture twice a week for 8 weeks. Healthy subjects (19 cases) were selected by demographic data matching as the control group. The cognitive function was evaluated with the event related potential (ERP) technique, and the latency and amplitude of visual evoked potential P300 were adopted as the observation indexes. The headache days (every 4 weeks), headache intensity [visual analogue scale(VAS) score], and headache impact test-6 (HIT-6) score, Hamilton depression scale (HAMD) score and Hamilton anxiety scale (HAMA) score were used as the observation indexes for curative effect.@*RESULTS@#Before the treatment, latency of target stimulus at Fz [ (417.5±34.3) ms] in the observation group was extended compared with the healthy subjects of the control group [(388.6±42.1) ms, @*CONCLUSION@#There are some cognitive impairments in migraine patients with depression/anxiety disorder. Five-element acupuncture not only relieves headache, anxiety and depression effectively, but also improves the activation level of the frontal lobe. It significantly repairs the impaired cognitive function.

TiO2 Nanosheet Arrays with Layered SnS2 and CoOx Nanoparticles for Efficient Photoelectrochemical Water Splitting.

Converting solar energy into sustainable hydrogen fuel by photoelectrochemical (PEC) water splitting is a promising technology to solve increasingly serious global energy supply and environmental issues. However, the PEC performance based on TiO2 nanomaterials is hindered by the limited sunlight-harvesting ability and its high recombination rate of photogenerated charge carriers. In this work, layered SnS2 absorbers and CoOx nanoparticles decorated two-dimensional (2D) TiO2 nanosheet array photoelectrode have been rationally designed and successfully synthesized, which remarkably enhanced the PEC performance for water splitting. As the result, photoconversion efficiency of TiO2/SnS2/CoOx and TiO2/SnS2 hybrid photoanodes increases by 3.6 and 2.0 times under simulated sunlight illumination, compared with the bare TiO2 nanosheet arrays photoanode. Furthermore, the TiO2/SnS2/CoOx photoanode also presented higher PEC stability owing to CoOx catalyst served as efficient water oxidation catalyst as well as an effective protectant for preventing absorber photocorrosion.

Total Synthesis of the Proposed Structure of Penasulfate A: l-Arabinose as a Source of Chirality.

The total synthesis of putative penasulfate A was effectively achieved by a convergent strategy with a longest linear sequence of 14 steps and overall yield of 8.6%. The highlights of our strategy involved an E-selective olefin cross-metathesis, Suzuki cross-coupling, and a copper(I)-catalyzed coupling reaction.

Epidemiological characteristics of rabies in Shaanxi Province from 1953 to 2017 / 中华疾病控制杂志

Objective To analyze the epidemiological characteristics of rabies in 1955-2016 and the third epidemic period in shaanxi province, and to provide scientific basis for prevention and control of rabies. Methods The historical epidemic data from 1853 to 2003, the rabies surveillance data from Chinese diesase prevention and control information system from 2004 to 2017, and the rabies patient case survey data from 2009 to 2017 were collected to conduct the analysis. Results From 1953 to 2017, there were three epidemics of human rabies in Shaanxi Province. In 2009-2017, 270 cases of rabies were reported, and rabies cases occurred every month. Cases were mainly concentrated in Guanzhong and southern Shaanxi, and occasional cases were reported in northern Shaanxi. The male-female ratio is 2.51 ∶〗1, and the occupational composition was dominated by farmers (84.4%). Injured dogs were mainly domesticated dogs, the ratio of domestic and stray dogs was 13.07 ∶〗1. The exposure level was mainly grade Ⅲ (84.23%). The wounds of 60% cases were not treated after the injury, and the rabies vaccination rate and immunoglobulin utilization rate were both low. Conclusions The public's awareness of the dangers of rabies was still insufficient, so that there was no standard treatment after canine bite, which causes disease. It is necessary to increase the publicity of rabies prevention and control knowledge. The focus should be placed on remote areas and rural areas, and the public should be advocated to take the initiative to use the reimbursement policy for medical treatment.

Comparison of the therapeutic effect on skeletal fluorosis and impact on urine fluoride value among fire needle therapy, electroacupuncture and calcium carbonate D3 / 中国针灸

<p><b>OBJECTIVE</b>To observe the impacts on skeletal fluorosis pain, joint motor dysfunction and urine fluoride excretion in the treatment with fire needle therapy, electroacupuncture and calcium carbonate D3.</p><p><b>METHODS</b>The randomized controlled trial was adopted. Ninety-five patients were randomized into a fire needle group (31 cases), an electroacupuncture group (33 cases) and a calcium carbonate D3 group (31 cases). In the fire needle group and the electroacupuncture group, Ashi points, Dazhui (GV 14), Geshu (BL 17), Quchi (LI 11), Hegu (LI 4), Xuehai (SP 10) points were selected and stimulated with fire needle and electroacupuncture separately, three times a week. In the calcium carbonate D3 group, calcium carbonate D3 tablets was prescribed for oral administration, 600 mg each time, twice a day. The duration of treatment was 2 months in the electroacupuncture group and calcium carbonate D3 group and 1 month in the fire needle group. VAS score, the range of motion (ROM) and urine fluoride value were compared before and after treatment in the patients of the three groups.</p><p><b>RESULTS</b>After treatment, VAS value and ROM were improved significantly in the patients of the three groups (all P < 0.05), the difference was not significant in comparison of the three groups (all P > 0.05). After treatment, the urine fluoride value was increased significantly in the fire needle group [(7.89 +/- 3.61) mg/L vs (9.81 +/- 4.17) mg/L, P < 0.01] and was increased in the electroacupuncture group [(7.53 +/- 3.46) mg/L vs (8.97 +/- 4.21) mg/L, P < 0.05]. The difference was not significant in comparison before and after treatment in the calcium carbonate D3 group (P > 0.05).</p><p><b>CONCLUSION</b>The fire needle therapy, electroacupuncture and calcium carbonate D3 all have the clinical value in the prevention and treatment of skeletal fluorosis and the difference in the therapeutic effect has not been discovered among them yet at present. But it has been found that the fire needle therapy and electroacupuncture display the active significance in the promotion of urine fluoride excretion.</p>

Drinking-water type fluorosis treated with acupuncture of reinforcing kidney and activating spleen: a randomized controlled trial / 中国针灸

<p><b>OBJECTIVE</b>To observe the impacts of acupuncture of reinforcing kidney and activating spleen on the excretion of urinary fluoride and pain of the patients with drinking-water type fluorosis.</p><p><b>METHODS</b>The randomized controlled and single-blind trial was adopted. Seventy-two cases were randomized into an observation group and a control group, 36 cases in each one. In the observation group, acupuncture was applied at Pishu (BL 20), Shenshu (BL 23), Guanyuan (CV 4), Zusanli (ST 36), etc. , three treatments a week. In the control group, the Calcium Carbonate D3 tablets were prescribed for oral administration, 600 mg each time, twice a day. The duration of treatment was 2 months. The changes of the content of urinary fluoride and pain score (by VAS) before and after treatment between two groups were compared.</p><p><b>RESULTS</b>The urinary fluoride excretion was increased obviously after treatment in the observation group (P < 0.01), which was superior apparently to that in the control group [(11.06 +/- 4.54) mg/L vs. (8.30 +/- 4.14) mg/L, P < 0.05]. After treatment, VAS score was reduced significantly in either group (both P < 0.01). The result in the observation group was lower remarkably than that in the control group (1.93 +/- 1.30 vs. 3.47 +/- 2.29, P < 0.01).</p><p><b>CONCLUSION</b>Acupuncture achieves the significant efficacy on the promotion of urinary fluoride excretion and pain relieving of the patients with drinking-water type fluorosis in light of reinforcing kidney and activating spleen, which is superior to the oral administration of the calcium carbonate D3 tablets.</p>