Is Italian Dentists' Knowledge of Enamel Development Defects Adequate? A Nationwide Survey.

OBJECTIVES: Correct identification and management of Developmental Defects of Enamel (DDEs) are essential to provide the best possible treatment. The present survey aims to investigate Italian dentists' knowledge of DDEs, their ability to recognise the different clinical pictures, and to choose the most appropriate clinical approach. METHODS: A cross-sectional survey was planned based on a questionnaire including 27 closed-ended questions, and that proposed 4 clinical pictures, molar incisor hypomineralisation (MIH), amelogenesis imperfecta (AI), dental fluorosis (DF), and an initial caries lesion (ICL). It was distributed by e-mail to all Italian dentists (N = 63,883) through the Italian Federation of Doctors and Dentists. Discrete variables were expressed as absolute and relative frequencies (%). A multivariate analysis assessed whether socio-demographic variables correlated with the answers' truthfulness. RESULTS: About 5017 questionnaires were included and analysed. Although 90.19% of the sample stated that they had received information on DDEs, a significant percentage did not recognise MIH (36.36%), AI (48.34%), DF (71.50%), and ICL (46.62%). Only 57.07% correctly classified enamel hypomineralisation as a qualitative defect, and even fewer, 54.45%, classified enamel hypoplasia as a quantitative defect. According to the logistic regressions, female dentists, dentists who treat mainly children and received information about DDEs, were more likely to recognise the 4 clinical pictures (P < .01). CONCLUSIONS: Italian dentists showed many knowledge gaps on DDEs that need to be filled; those who received formal training were more capable of correctly identifying the defects and were more likely to prescribe an appropriate management approach for the defects. CLINICAL SIGNIFICANCE: Increasing university courses and continuing education on diagnosing and managing DDEs seems reasonable to fill the knowledge gap on DDEs.

Effectiveness of miniscrew-supported maxillary molar distalization according to temporary anchorage device features and appliance design: systematic review and meta-analysis.

OBJECTIVES: To evaluate the effectiveness of distalizing maxillary first molars (U6) by temporary anchorage devices (TADs) according to their location (palatal, buccal, and zygomatic), their number, and appliance design. MATERIALS AND METHODS: An electronic search of maxillary molar distalization with TADs was done through April 2023. After study selection, data extraction, and risk-of-bias assessment, meta-analyses were performed for the extent of distalization, distal tipping, and vertical movement of U6 using the generic inverse variance and random-effects model. The significance level was set at 0.05. RESULTS: Forty studies met the inclusion criteria: 4 randomized controlled trials (RCTs), 13 prospective studies, and 23 retrospective studies (total of 1182 patients). Distalization of the U6 was not significantly greater (P = .64) by palatal (3.74 mm) and zygomatic (3.68 mm) than by buccal (3.23 mm) TADs. Distal tipping was significantly higher (P < .001) in nonrigid (9.84°) than in rigid (1.97°) appliances. Vertical movement was mostly intrusive and higher but not significantly different (P = .28) in zygomatic anchorage (-1.16 mm). CONCLUSIONS: Distalization of U6 with TADs can be an effective and stable treatment procedure, especially when performed with rigid palatal appliances. However, further RCTs or prospective cohort studies are strongly recommended to provide more clinical evidence.

Comparison of the skeletal, dentoalveolar, and periodontal changes after Ni-Ti leaf spring expander and rapid maxillary expansion: a three-dimensional CBCT based evaluation.

BACKGROUND: The aim of the present study was twofold:(1) three-dimensionally evaluate the quantitative skeletal and dentoalveolar changes after Ni-Ti leaf spring expander (leaf expander) and rapid maxillary expansion (RME) in mixed dentition patients;(2) analyze the modifications of the buccal alveolar bone plate of the maxillary first permanent molars. METHODS: Patients who underwent CBCT scans before and after maxillary expansion were randomly selected from the records archived at the Department of Biomedical Surgical and Dental Sciences, University of Milan, Italy. Inclusion criteria were the following: no systemic disease or syndromes; maxillary transverse deficiencies (difference between the upper intermolar width and the lower intermolar width of at least 3 mm and/or clinical need based on radiographic evaluation), early mixed dentition with ages between 7 to 10 years old; cervical vertebra maturation stage (CVMS) 1 or 2; no pathologic periodontal status; skeletal class I or II; maxillary expander cemented on the upper second deciduous molars. Exclusion criteria were the following: patients with pubertal or post-pubertal stage of development (CVMS 3-6); late deciduous or late mixed dentition, impossibility to use the second primary molar as anchorage; skeletal class III malocclusion; craniofacial syndromes; patients unable to be followed during the treatment period. Twenty-three patients treated with Leaf Expander, 11 males (mean age 7.8 ± 0.6 years) and 12 females (mean age 8.1 ± 0.8 years), met the inclusion criteria and constituted the case group. Twenty-four (control group) treated with conventional RME, 12 males (mean age 8.4 ± 0.9 years) and 12 females (mean age 8.1 ± 0.7 years). The paired-sample T test was used for intra-group comparison to evaluate the difference between before (T1) and after (T2) maxillary expansion. Independent sample t-test was computed to perform between groups comparison of the skeletal, dentoalveolar, and periodontal changes. RESULTS: The Leaf Expander and RME group showed a significant increase between T1 and T2 for most of the skeletal and dentoalveolar variables. Concerning the skeletal variables only the RME demonstrated a significant increase at the level of the posterior nasal (PNW) and apical base width (PABW) and maxillary mid-alveolar width (MMW). Despite this, when compare with the Leaf Expander, the RME group exhibited a statistically larger width increase for only two skeletal parameters: PNW (p = 0.03) and MMW (p = 0.02). No significant changes at the periodontal level were found in either group. CONCLUSIONS: According to the current research, the authors confirm the effectiveness of the Leaf Expander and RME to produce similar skeletal and dentoalveolar effects in mixed dentition subjects. Moreover, the devices anchored to deciduous teeth did not reduce the thickness and height of the buccal bone at the level of the maxillary permanent first molars in either of the two groups.

3D occlusal changes of upper first molars after rapid maxillary expansion on permanent versus deciduous teeth: a retrospective multicenter CBCT study.

BACKGROUND: The purpose of this study was to compare the three-dimensional dental changes for the maxillary first molars and the overall skeletal effects achieved after expansion between the rapid maxillary expansion (RME) appliance attached to two different anchor units, the maxillary deciduous molars and the maxillary permanent first molars. METHODS: Patients were retrospectively selected according to the anchorage unit used for RME: deciduous upper second molars (RME-E group; 10 M, 10 F; mean age 8.4 ± 1.1 years) and first upper permanent molars (RME-6 group; 10 M, 10 F; mean age 12.6 ± 1.8 years). CBCT scans were obtained before treatment start (T1) and after retention and removal of the expander (T2). Images were analyzed using a new three-dimensional intra-hemi-maxillary reference system. 3D landmarks were marked to calculate all changes on maxillary first permanent molars; mesio-distal and buccal-lingual inclination and rotation, as well as intermolar and interforaminal distances were calculated. The Wilcoxon test was used to compare within-group changes, whereas the Mann-Whitney test was used to compare between-group differences, with the significance level set at 0.05. RESULTS: In the RME-E group, significant distorotation and lingual inclination of the first permanent molars at T2 were observed (p < 0.01); in the RME-6 group, only the buccolingual inclination of the crossbite side after RME was resulted statistically significant (p < 0.01). In both groups, intermolar and interforaminal values increased significantly (p < 0.01). Intergroup analysis showed a significantly higher distorotation and reduced buccal inclination of maxillary first permanent molars in the RME-E group after RME (p < 0.01). CONCLUSIONS: RME is effective in treating maxillary transverse hypoplasia; RME anchored too deciduous teeth spontaneously reduces buccal inclination and increases distorotation of maxillary first permanent molars, whereas anchorage to permanent molars is associated with increased buccal inclination, albeit with little clinical significance.

Accuracy of automated 3D cephalometric landmarks by deep learning algorithms: systematic review and meta-analysis.

OBJECTIVES: The aim of the present systematic review and meta-analysis is to assess the accuracy of automated landmarking using deep learning in comparison with manual tracing for cephalometric analysis of 3D medical images. METHODS: PubMed/Medline, IEEE Xplore, Scopus and ArXiv electronic databases were searched. Selection criteria were: ex vivo and in vivo volumetric data images suitable for 3D landmarking (Problem), a minimum of five automated landmarking performed by deep learning method (Intervention), manual landmarking (Comparison), and mean accuracy, in mm, between manual and automated landmarking (Outcome). QUADAS-2 was adapted for quality analysis. Meta-analysis was performed on studies that reported as outcome mean values and standard deviation of the difference (error) between manual and automated landmarking. Linear regression plots were used to analyze correlations between mean accuracy and year of publication. RESULTS: The initial electronic screening yielded 252 papers published between 2020 and 2022. A total of 15 studies were included for the qualitative synthesis, whereas 11 studies were used for the meta-analysis. Overall random effect model revealed a mean value of 2.44 mm, with a high heterogeneity (I2 = 98.13%, τ2 = 1.018, p-value < 0.001); risk of bias was high due to the presence of issues for several domains per study. Meta-regression indicated a significant relation between mean error and year of publication (p value = 0.012). CONCLUSION: Deep learning algorithms showed an excellent accuracy for automated 3D cephalometric landmarking. In the last two years promising algorithms have been developed and improvements in landmarks annotation accuracy have been done.

Treatment outcome of class II malocclusion therapy including extraction of maxillary first molars: a cephalometric comparison between normodivergent and hyperdivergent facial types.

Background: The dentoalveolar component of a Class II division 1 malocclusion can be orthodontically treated either with extractions or by distalization of the molars. This study aimed to compare skeletal, dentoalveolar and profile changes in normodivergent and hyperdivergent Class II Division I growing patients orthodontically treated with fixed appliances including maxillary first molar extraction. Methods: Sixty-four patients treated orthodontically with full fixed appliances including maxillary first molar extractions were retrospectively analyzed. Patients were divided into a normodivergent group (Group N; 30° ≤ SN^GoGn < 36°) consisting of 38 patients (17M, 21F; mean age 13.2 ± 1.3 years) and a hyperdivergent (Group H; SN^GoGn ≥ 36°) including 26 patients (12M, 14F; mean age 13.7 ± 1.1 years). Lateral cephalograms were available before (T0) and after treatment (T1) and cephalometric changes were calculated for 10 linear and 13 angular variables. The Shapiro-Wilk test confirmed a normal distribution of data, hence parametric tests were employed. The Student t-test was used to compare groups at baseline. The paired t-test was used to analyze intragroup changes between timepoints, and the Student t-test for intergroup comparisons. The level of significance was set at 0.05. Results: The Class II division 1 malocclusion was successfully corrected, and the facial profile improved both in normodivergent and hyperdivergent patients. Divergency increased by 0.76 ± 1.99° in Group N (p = 0.02) while it decreased -0.23 ± 2.25° (p = 0.60); These changes were not significant between groups after treatment (p = 0.680). Most dentoskeletal measurements changed significantly within groups but none of them showed statistically significant differences between groups after treatment. Dental and soft tissue changes were in accordance with the biomechanics used for this Class II orthodontic therapy. Discussion: The effect of orthodontic treatment of Class II division 1 malocclusion including extraction of the maxillary first molars in growing patients can be considered clinically equivalent in normodivergent and hyperdivergent patients. For this reason, this orthodontic treatment can be considered a viable option in the armamentarium of the Class II Division I therapy for both facial types.

CBCT Analysis of Dento-Skeletal Changes after Rapid versus Slow Maxillary Expansion on Deciduous Teeth: A Randomized Clinical Trial.

The aim of the present study was to compare skeletal and dental changes after rapid maxillary expansion (RME) and slow maxillary expansion (SME) performed by a Leaf Expander (LE) with upper deciduous teeth as anchorage and using 3D CBCT (Cone Beam Computed Tomography) analysis. Mixed dentition patients were randomly divided in two groups, according to the different expansion used anchored on maxillary primary second molars: the RME group (n = 16) was treated with a Hyrax type expander, whereas the SME group (n = 16) was treated with an LE expander. CBCT scans were performed before (T1) and after treatment (T2) and analyzed with a custom landmarks system. A paired t-test was used for intragroup analysis between T1 and T2, and a Student t-test was used for intergroup analysis; statistical significance was set at 0.05. Both RME and SME groups showed a statistically significant increase in dental and skeletal diameters. Group comparisons between T1 and T2 showed a significant expansion rate in the RME group for upper permanent molars (p = 0.025) but not for deciduous molars (p = 0.790). Moreover, RME showed higher increases for skeletal expansion evaluated at nasal walls (p = 0.041), whereas at pterygoid plates did not show any significant differences compared with the SME group (p = 0.849). A significant transverse expansion could be achieved with the expander anchored on deciduous teeth. RME and SME produced effective both skeletal and dentoalveolar transverse expansion; RME produced more anterior expansion than SME but less control regarding the permanent molar decompensation. SME by LE therefore could be an efficient and helpful alternative in the treatment of transverse maxillary deficiency in growing patients.

Skeletal, Dental and Soft Tissue Cephalometric Changes after Orthodontic Treatment of Dental Class II Malocclusion with Maxillary First Molar or First Premolar Extractions.

The aim of the present retrospective study was evaluating skeletal, dental and soft tissue changes of two groups of Class II patients orthodontically treated with extractions of upper first premolars (U4 group) and upper first molars (U6 group). In total, 21 patient records (9M and 12F; mean age 12.5 ± 1.2 years) were selected for the U4 group, and 38 patient records (17M and 21F; mean age 13.2 ± 1.3 years) were recruited for the U6 group. Twenty cephalometric variables were analysed on standardised lateral cephalograms at baseline (T0) and at the end of orthodontic treatment (T1). Means and standard deviations (SDs) were calculated for both groups and increments were calculated. After revealing the normal distribution of data with the Shapiro-Wilk test, Student's t-test was used to compare variables at T0 between groups. A paired t-test was used to analyse changes between time points within each group, and Student's t-test to compare differences between groups at T1. Both groups showed a significant increase in the distance among upper second molars and the vertical pterygoid line (PTV-maxillary second molar centroid U6 group: 6.66 ± 5.00 mm; U4 group: 3.66 ± 2.20 mm). Moreover, the distance of upper incisors to the palatal plane significantly increased (PP-maxillary incisor tip U6 group: 1.09 ± 1.52 mm; U4 group: 0.20 ± 2.00 mm; p = 0.061). Significant changes were found for overjet (U6 group: -4.86 ± 1.62 mm; U4 group: -3.27 ± 1.90 mm; p = 0.001). The distance between upper lip and esthetic plane showed a significantly reduction in both groups (ULip-E Plane U6 group: -2.98 ± 1.65 mm; U4 group: -1.93 ± 1.57 mm). No statistically significant changes were found in sagittal or vertical skeletal values. The significantly larger reduction of upper lip protrusion and overjet in the U6 group compared to the U4 group suggests preferring molar extraction treatment for severe Class II with protrusive soft tissues' profile and increased overjet. Since no differences on vertical values were found, an increased SN^GoGn angle should not be considered a discriminating factor for choosing molar extraction treatment.

Cone-Beam Computed Tomographic Assessment of the Mandibular Condylar Volume in Different Skeletal Patterns: A Retrospective Study in Adult Patients.

The aim of this study was to assess the condylar volume in adult patients with different skeletal classes and vertical patterns using cone-beam computed tomography (CBCT). CBCT scans of 146 condyles from 73 patients (mean age 30 ± 12 years old; 49 female, 24 male) were selected from the archive of the Department of Dentistry and Maxillofacial Surgery of Fondazione IRCCS Ca' Granda, Milan, Italy, and retrospectively analyzed. The following inclusion criteria were used: adult patients; CBCT performed with the same protocol (0.4 mm slice thickness, 16 × 22 cm field of view, 20 s scan time); no systemic diseases; and no previous orthodontic treatments. Three-dimensional cephalometric tracings were performed for each patient, the mandibular condyles were segmented and the relevant volumes calculated using Mimics Materialize 20.0® software (Materialise, Leuven, Belgium). Right and left variables were analyzed together using random-intercept linear regression models. No significant association between condylar volumes and skeletal class was found. On the other hand, in relation to vertical patterns, the mean values of the mandibular condyle volumes in hyperdivergent subjects (688 mm3) with a post-rotation growth pattern (625 mm3) were smaller than in hypodivergent patients (812 mm3) with a horizontal growth pattern (900 mm3). Patients with an increased divergence angle had smaller condylar volumes than subjects with normal or decreased mandibular plane divergence. This relationship may help the clinician when planning orthodontic treatment.

Consistency and Reliability Analyses of a Comprehensive Index for the Evaluation of Teeth Alignment Performance.

(1) Introduction: The purpose of this work was to describe a method and propose a novel accuracy index to assess orthodontic alignment performance. (2) Methods: Fifteen patients who underwent orthodontic treatment using directly printed clear aligners were recruited. The study sample included 12 maxillary and 10 mandibular arches, whose pre-treatment, predicted and post-treatment digital models were superimposed on the untreated posterior teeth by means of a best-fit surface-based registration, which was also used to transfer three anatomical landmarks, digitally labeled on the crown of each anterior moving tooth, from the pre-treatment to the predicted and post-treatment models. The Teeth Alignment Performance (TAP) index, quantifying how close the final landmarks were to their expected final position, was proposed as an accuracy index of both individual tooth and group of teeth movement, and its inter-examiner repeatability was tested. (3) Results: No systematic inter-rater discrepancy associated with TAP was observed (p > 0.05), not even when a slight systematic inter-rater difference in landmark labelling was detected (for the upper central incisors, p < 0.001). In addition, all Intra-class Correlation Coefficient (ICC) values showed excellent inter-rater agreement (>0.95), and the small Random Error of Measurement (REM), ranging from 1% for the arch TAP to 3% for the lower canine TAP, indicated that this accuracy index is highly repeatable. (4) Conclusions: The TAP index was proven to be comprehensive, consistent and reliable in assessing the performance of teeth alignment according to a digital plan. The proposed method is also suitable to be implemented in the clinical digital workflow.

Does Early Treatment Improve Clinical Outcome of Class II Patients? A Retrospective Study.

The present study was carried out to evaluate the benefits from one-phase Class II Early Treatment (ET) using extraoral forces and functional appliances but without intermaxillary forces and eventual lower leeway space preservation compared to two-phase Class II Late Treatment (LT) with the need for extractions and full fixed appliances as well as lower incisor proclination. The ET group (n = 239, 115 M, 124 F, mean age 10.6 ± 1.2 years), with first premolars not in contact and the second deciduous lower molars preserved, was compared to the LT group (n = 288, 137 M, 151 F, mean age 12.4 ± 1.5 years). The ET group was first treated with headgears, growth guide appliances, or Teuscher activators and, in borderline crowding cases, with lower space maintenance by a lingual arch, lip bumper, or fixed utility arch. The LT group and the second phase of ET were treated with full fixed appliances including intermaxillary forces such as Class II elastics or noncompliance devices; headgear and a growth guide appliance were also used. Cephalograms and plaster models were taken before (T1) and after treatment (T2) to calculate cephalometric changes and space balance discrepancies. The differences between T1 and T2 were analyzed by a t-test for normally distributed data and by the Mann-Whitney Test for nonnormally distributed data at a level of p < 0.05. The groups were defined as statistically homogeneous at T1. A statistical analysis showed that the ET group (mean treatment time 35.3 ± 13.3 months) was significantly associated with a 22.2% lower extraction rate, 15.9% less need for a full fixed appliance, and more than 5° less incisor proclination in the nonextraction cases compared to the LT group (mean treatment time 25.9 ± 8.1 months); treatment time significantly increased in the ET group compared to the LT group. Early Class II treatment resulted in a significant treatment effort reduction in more than one third of the patients and less lower incisor proclination, even if it clinically increased treatment time.

Influence of facial components in class III malocclusion esthetic perception of orthodontists, patients, and laypersons.

PURPOSE: The aim of the present study was to investigate the influence of different facial components (face length, lip volume, nose size, and cheekbone contour) on the perception of facial attractiveness of patients with Angle class III malocclusion in different categories of responders (orthodontists, laypersons, patients) with two-dimensional (2D) and three-dimensional (3D) simulations. METHODS: An ideal standard 3D face was manipulated to create a class III facial malocclusion. Four facial components were modified (face length, lip volume, nose size and cheekbone contour) and the resulting simulations were used to obtain 2D figures and 3D videos, which were evaluated in a survey by orthodontists, patients, and laypersons. RESULTS: No significant differences were detected between the 2D figures and 3D video simulations. Good correspondence was shown between the three categories of responders for the most and the least attractive faces. Smaller lips and bigger nose, regardless to the vertical dimension (short or long face), were found to be the least attractive features with agreement of all respondents. CONCLUSION: Regarding class III facial attractiveness perception, the sum of all facial features and not the alteration of a single component alone seems to play a key role in the perception of facial attractiveness. The 2D or 3D perspective did not play a significant role in perception and the analyzed categories of responders did not show significant differences when perceiving facial attractiveness of the utilized simulations.

Three-dimensional volumetric evaluation of the different mandibular segments using CBCT in patients affected by juvenile idiopathic arthritis: a cross-sectional study.

BACKGROUND: There is currently no information on how different mandibular segments are affected by juvenile idiopathic arthritis. The aim of this paper is to assess volumetric differences of different mandibular segments in subjects with unilateral and bilateral JIA and to compare them with non-JIA control volumes. MATERIALS AND METHODS: Forty subjects with unilateral TMJ involvement and 48 with bilateral TMJ involvement were selected for the case group and 45 subjects with no known rheumatic comorbidities for the control group. The mandible of each subject was divided according to a validated method into different paired volumes (hemimandible, condyle, ramus and hemibody). RESULTS: The ANOVA test revealed a statistically significant difference in all the groups for condylar and ramus volumes, and the pairwise comparison evidenced a statistically significant higher condylar and ramus volume in the control group (1444.47 mm3; 5715.44 mm3) than in the affected side in the unilateral JIA group (929.46 mm3; 4776.31 mm3) and the bilateral JIA group (1068.54 mm3; 5715.44 mm3). Moreover, there was also a higher condylar volume in the unaffected side in the unilateral JIA group (1419.39 mm3; 5566.24 mm3) than in the bilateral JIA group and the affected side in the unilateral JIA group. CONCLUSIONS: The affected side of unilateral JIA patients showed statistically significant lower volumes in the hemimandible, in the condyle and in the ramus. The largest total mandibular volume was observed in the control group, followed by the unilateral JIA group and, lastly, by the bilateral JIA group.

The Application of the Divine Proportion for the Construction of the Visualized Treatment Objective in Craniofacial Surgery.

ABSTRACT: Aesthetics and function of maxillofacial district are closely related and could interfere with patient psychological conditions. The aim of this paper is to describe and to analyze the procedures necessary for a proper surgical visualized treatment objective (VTO) realization through the use of the tracing on lateral head film, applying the divine proportion (or golden ratio) in certain steps. The method described is easy to realize, cheap and help both orthodontist and maxillo-facial surgeon to communicate each other and to the patients.For the following article, digital research and handheld research on surgical VTO planning for patients with skeletal or dentoalveolar severe deformities managed by surgeons and orthodontics were used. The research included articles in English published on dental and maxillofacial surgery journals.The surgical VTO consists of a "previsualization" of the objectives in order to make the desired changes for the individual patient. The result can thus be visualized and pre-evaluated rather than just imagined by the mind's eye. To simplify the procedure, the surgical VTO has been divided into 11 steps. The accurate model of the surgical result is fundamental in the treatment of dentofacial deformities. These predictions are intended to guide the treatment towards the desired result, to give the patient a reasonable preview of the outcome, and to ensure communication between the orthodontist and the surgeon.This technique proves to be effective in planning surgical treatment and it allows the clinician to view changes before, during, and after orthognathic surgery. The skeletal, dental, and aesthetic complete cephalometric evaluation is the key point to the long-term success of the results.

Occlusal Plane Changes After Molar Distalization With a Pendulum Appliance in Growing Patients with Class II Malocclusion: A Retrospective Cephalometric Study.

OBJECTIVE: This study aimed to evaluate the skeletal and dental changes after distalization with a pendulum appliance in growing patients with Class II malocclusion, focusing on the occlusal plane (OP). METHODS: The sample included 24 patients with Class II malocclusion (10 boys, 14 girls); their mean age was 12.1 years. All patients underwent molar distalization and had 2 serial cephalograms traced at baseline (T1) and after distalization (T2). Angular and linear dental changes were calculated by taking the sella-nasion (SN), palatal plane (PP), and pterygoid vertical as reference. OP inclination was compared with SN, PP, and mandibular plane. The collected data were computed for all the tested variables, and one-way paired t-test was used to assess the significance of the differences between the time points. α was set at 0.05. Multiple linear regressions were used to predict the OP changes. RESULTS: The mean total treatment time was 8±2 months to obtain a super Class I molar relationship. In T1-T2 interval, statistically significant incisor buccal tipping of 5°±3.6° (p<0.05), first molar distal tipping of 8.9°±8.3° (p<0.001), and second molar tipping of 8.2°±8.1° (p<0.001) were observed. The maxillary first and second molars moved significantly backward by 2.8±3.2 mm (p<0.05) and 3.7±2.7 mm (p<0.001), respectively. Only the premolars showed a statistically significant anchorage loss of 2.7±3.3 mm (p<0.05); overjet increased significantly at 1.3±1.2 mm (p<0.05). Regarding the OP, none of the tested variables showed any statistically significant changes between T1-T2. CONCLUSION: The pendulum appliance showed efficacy in distalizing the maxillary first and second molars at the expense of anterior anchorage loss. The OP did not show statistically significant changes after molar distalization.

Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities.

The recent introduction of three-dimensional (3D) printing is revolutionizing dentistry and is even being applied to orthodontic treatment of malocclusion. Clear, personalized, removable aligners are a suitable alternative to conventional orthodontic appliances, offering a more comfortable and efficient solution for patients. Including improved oral hygiene and aesthetics during treatment. Contemporarily, clear aligners are produced by a thermoforming process using various types of thermoplastic materials. The thermoforming procedure alters the properties of the material, and the intraoral environment further modifies the properties of a clear aligner, affecting overall performance of the material. Direct 3D printing offers the creation of highly precise clear aligners with soft edges, digitally designed and identically reproduced for an entire set of treatment aligners; offering a better fit, higher efficacy, and reproducibility. Despite the known benefits of 3D printing and the popularity of its dental applications, very limited technical and clinical data are available in the literature about directly printed clear aligners. The present article discusses the advantages of 3D printed aligners in comparison to thermoformed ones, describes the current state of the art, including a discussion of the possible road blocks that exist such as a current lack of approved and marketed materials and limited existence of aligner specific software. The present review suggests the suitability of 3D direct printed aligners is superior to that of thermoformed manufactured aligners because of the prior's increased accuracy, load resistance, and lower deformation. It is an overall more stable way to produce an aligner where submillimeter movements can make a difference in treatment outcome. Direct 3D printing represents a complex method to control the thickness of the aligner and therefore has a better ability to control the force vectors that are used to produce tooth movement. There is currently no other approved material on the market that can do this. The conclusion of this article is that we encourage further in vitro and in vivo studies to test these new technologies and materials.

Condylar Changes in Children with Posterior Crossbite after Maxillary Expansion: Tridimensional Evaluation.

(1) Background: To investigate condylar position in subjects with functional posterior crossbite comparing findings before and after rapid maxillary expansion (RME) treatment through 3D analysis; (2) Methods: Thirty-two Caucasian patients (14 males, mean age 8 y 8 m ± 1 y 2 m; 18 females mean age 8 y 2 m ± 1 y 4 m) with functional posterior crossbite (FPXB) diagnosis underwent rapid palatal expansion with a Haas appliance banded on second deciduous upper molars. Patients' underwent CBCT scans before rapid palatal expansion (T0) and after 12 months (T1). The images were processed through 3D slicer software; (3) Results: The condylar position changes between T1 and T0 among the crossbite and non-crossbite sides were not statistically significant, except for the transversal axis. At T1, the condyles moved forward (y axis) and laterally (x axis), they also moved downward (z axis) but not significantly; (4) Conclusions: Condilar position in growing patients with functional posterior crossbite did not change significantly after rapid maxillary expansion.

Occlusal Plane and Skeletal Changes After Cervical Headgear Treatment With and Without Lower Utility Arch in Class II Growing Patients.

ABSTRACT: The purpose of this study was to investigate skeletal and dental changes affecting occlusal plane inclination after cervical headgear treatment with and without lower utility arch. In order to distinguish the orthodontic changes from natural growth a control group was employed.The sample of this study consisted by 20 Class II subjects (10 males, 10 females; mean age 8.54) treated by using cervical headgear, 19 class II children (19 males, 9 females; mean age 8.64) treated with cervical headgear and utility arch, and 21 Class II patients (11 males, 10 females; mean age 8.41) who had no therapy.Lateral head films were studied for all the patients before treatment (T1) and after therapy (T2) for all the treated groups and at the beginning and at the end of observational period for the control group; cephalometric analysis was carried out in order to seek for the modifications between time points and between groups.Means and standard deviation have been analyzed for all the groups. In order to compare the modification between the time points within the same group the ANOVA test was applied. The ANOVA test was used to compare the mean differences (T2-T1) of 3 groups.The study revealed that there were significant changes in occlusal plane inclination after the different treatment modalities employed instead control group. The treatment with cervical headgear and utility arch is more effective than cervical headgear alone in lowering occlusal plane posteriorly when it is compared with controls.

Upper canine response to rapid maxillary expander anchored to deciduous vs. permanent molars.

PURPOSE: To understand whether two different designs of Haas-type rapid maxillary expander (H­RME) might have a different influence on canine eruption. PATIENTS AND METHODS: In all, 108 subjects seeking orthodontic treatment were selected and divided into two groups-H­RME with bands on the upper second deciduous molars (GrE), H­RME with bands on the upper first permanent molars (Gr6)-and were also compared to an historical untreated control group (CG) of 29 subjects. Panoramic x­rays (OPG) were performed before and after RME (T0-T1: 16 ± 7 months) and the upper canine angulation to the midline ("α" angle) was measured on both pre- and posttreatment OPG. RESULTS: A significant improvement of the canine position (decrease of the α angle) following RME in subjects with mixed dentition was reported in both treated groups, although the different design of the RME did not significantly affect canine angulation. Canine angulation in untreated subjects with transversal discrepancy did not improve significantly. CONCLUSION: Using RME in the early mixed dentition appears to be an effective procedure to increase the rate of eruption of maxillary canines, but the position of the bands on the upper second deciduous molars or on the upper first permanent molars and the significant different expansion of the upper dental arch at the canine level does not significantly influence the canine angulation following early treatment therapy.