Construction of Au quantum dots/nitrogen-defect-enriched graphite carbon nitride heterostructure via photo-deposition towards enhanced nitric oxide photooxidation.

The challenge of mitigating pollution stemming from industrial exhaust emissions is a pressing issue in both academia and industry. This study presents the successful synthesis of nitrogen-defect-enriched graphite carbon nitride (g-C3N4) using a two-step calcination technique. Furthermore, a g-C3N4-Au heterostructure was fabricated through the photo-deposited Au quantum dots (QDs). When subjected to visible light irradiation, this heterostructure exhibited robust nitric oxide (NO) photooxidation activity and stability. With its fluffy, porous structure and large surface area, the nitrogen-defect-enriched g-C3N4 provides more active sites for photooxidation processes. The ability of g-C3N4 to absorb visible light is enhanced by the local surface plasmon resonance (LSPR) effect of Au QDs. Additionally, the lifetime of photogenerated charge carriers is extended by the presence of N defects and Au, which effectively prevent photogenerated electron-hole pairs from recombining during the photooxidation process. Moreover, the oxidation pathway of NO was analyzed through In-situ Fourier transform infrared (FT-IR) spectroscopy and Density Functional Theory (DFT) calculation. Computational findings revealed that the introduction of Au QDs decreases the activation energy of the oxidation reaction, thereby facilitating its occurrence while diminishing the formation of intermediate products. As a result, NO is predominantly converted to nitrate (NO3-). This work unveils a novel approach to constructing semiconductor-cocatalyst heterostructures and elucidates their role in NO photooxidation.

Preparation and isolation of mono-Nb substituted Keggin-type phosphomolybdic acid and its application as an oxidation catalyst for isobutylaldehyde and Wacker-type oxidation.

The potassium and proton mixed salt of mono-Nb substituted Keggin-type phosphomolybdate, KH3[PMo11NbO40], was isolated in a pure form by reacting Keggin-type phosphomolybdic acid (H3[PMo12O40]) and potassium hexaniobate (K8Nb6O19) in water, followed by freeze-drying. The all protonic form, H4[PMo11NbO40], was isolated via proton exchange with H-resin and subsequent freeze-drying. The most crucial factor to isolate KH3[PMo11NbO40] and H4[PMo11NbO40] in pure forms is the evaporation of water using the freeze-drying method. Using a similar procedure, the potassium salt of the di-Nb substituted compound K5[PMo10Nb2O40] was isolated. H4[PMo11NbO40] exhibited high catalytic activity for oxidizing isobutylaldehyde to methacrolein and moderate catalytic activity for the Wacker-type oxidation of allyl phenyl ether when combined with Pd(OAc)2.

Reactive Distillation of Glycolic Acid Using Heterogeneous Catalysts: Experimental Studies and Process Simulation.

The glycerol oxidation reaction was developed leading to selective catalysts and optimum conditions for the production of carboxylic acids such as glycolic acid. However, carboxylic acids are produced in highly diluted mixtures, challenging the recovery and purification, and resulting in high production costs, polymerization, and thermal degradation of some of the products. The protection of the acid function by esterification reaction is one of the most promising alternatives through reactive distillation (RD); this technique allows simultaneously the recovery of carboxylic acids and the elimination of most part of the water. The reactive distillation, experimental and simulation, of glycolic acid was performed, based on kinetic and thermodynamic models developed. For the thermodynamic model, binary parameters of the missing couples were determined experimentally, and the non-random two-liquid (NRTL) model was selected as the most suitable to represent the binary behavior. The kinetic study of the esterification in the presence of homogeneous and heterogeneous catalysis concluded that the heterogeneous reaction can be accurately described either by a pseudo-homogeneous model or the Langmuir-Hinshelwood (L-H) adsorption model. Reactive distillation was conducted in a distillation column filled with random packing sulfonated ion-exchange resin, Nafion NR50®, or with extruded TiO2-Wox. The conversion rate of glycolic acid in reactive distillation increases from 14% without catalyst to 30% and 36% using Nafion NR50® and TiO2-Wox, respectively. As opposed to the batch reactor study, the conversion rate of glycolic acid was better with TiO2-Wox than with sulfonated ion-exchange resin. The better performance was related to an increase in the hydrodynamics inside the column. Tests using water in the feed confirm the hypothesis by increasing the conversion rate because of the decrease in the mass transfer resistance by reducing the average diffusion coefficient. The simulation of the reactive distillation column with ProSim® Plus showed that the yield of the ester increased operating at a low feed rate with reactive stripping. In the presence of water in the feed, nonreactive stages are required, including an enrichment region to separate water vapor.

Strengthening the Connection between Science, Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS.

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.

Glycerol to Glyceraldehyde Oxidation Reaction Over Pt-Based Catalysts Under Base-Free Conditions.

Glycerol valorization through partial oxidation is a good way of obtaining many different molecules with high added value such as glyceric acid, tartronic acid, dihydroxyacetone, etc. Among the potential products, glyceraldehyde is an interesting chemical compound for its various applications in different domains such as organic chemistry, medical, and cosmetic industries. In the present paper, we studied the effect of different supports on the glycerol oxidation reaction in a batch reactor applying base-free conditions. The tested catalysts were Pt-based materials deposited on various supports (i.e., SiO2, TiO2, ZSM-5, γ-Al2O3), which were synthesized using a deposition method followed by a chemical reduction. The catalysts were extensively characterized (BET, ICP, XRD, TEM, XPS), highlighting differences in terms of specific surface areas, textural properties, and Pt nanoparticles sizes. We evidenced a direct relation between glycerol conversion and glyceraldehyde selectivity (i.e., an increase in glycerol conversion leads to a decrease in glyceraldehyde selectivity). The Pt/γ-Al2O3 catalysts exhibited the highest activity, but their selectivity to glyceraldehyde significantly decreased with time on stream. Pt/SiO2 presented the highest selectivity to glyceraldehyde owing to a slower reaction rate, which allows envisioning technical opportunities to continuously extract the formed glyceraldehyde from the mixture.

Extending Catalyst Life in Glycerol-to-Acrolein Conversion Using Non-thermal Plasma.

Booming biodiesel production worldwide demands valorization of its byproduct of glycerol. Acrolein, an important intermediate chemical, can be produced by gas-phase glycerol dehydration catalyzed by solid acids. Because catalysts that lead to high acrolein selectivity usually deactivate rapidly due to the formation of coke that blocks the active sites on their surface, one major challenge of this method is how to extend the service life of the catalyst. Silica-supported silicotungstic acid (HSiW-Si) is a good example of such a catalyst that shows good activity in glycerol dehydration to acrolein initially, but deactivates quickly. In this study, HSiW-Si was selected to probe the potential of using non-thermal plasma with oxygen-containing gas as the discharge gas (NTP-O2) to solve the catalyst deactivation problem. NTP-O2 was found to be effective in coke removal and catalyst regeneration at low temperatures without damaging the Keggin structure of the HSiW-Si catalyst.

Novel La3Fe(MoO4)6 phase: magnetic properties and ethanol reactivity.

Single crystals of a new oxide, La3Fe(MoO4)6, were grown from fluxes of oxide precursors, and a polycrystalline sample was also prepared by a standard solid state reaction. La3Fe(MoO4)6 crystallizes in the orthorhombic space group Pbca with unit cell parameters a = 19.3164(11), b = 10.4143(5) and c = 22.0594(12) Å. This crystal structure exhibits a singular architectural type built on infinite chains of Fe(MoO4)4, each of them being surrounded by two isolated MoO4 tetrahedra and three isolated La(3+) cations. Fe(3+) ions in La3Fe(MoO4)6 are antiferromagnetically ordered below TN = 6.6 K in chains and between chains, as refined from neutron diffraction data. Further the redox stability of this compound - pure powder - was checked using temperature-programmed X-ray diffraction under a controlled atmosphere; under air, we observed a reversible phase transition above 523 K. The same phenomenon was observed under a reductive atmosphere, followed by a destruction of the as-formed phase above 923 K owing to iron III to II reduction. Reactivity of ethanol was then evaluated to get insights into the redox properties of the material under working conditions. After 4 hours of reaction at 648 K, the ethanol conversion was 97% with a selectivity to acetaldehyde of ∼60%, the other products being formaldehyde (∼10%) and CO2 (∼30%), underlining a better acetaldehyde selectivity than that of the La-free conventional Fe2(MoO4)3 catalytic formulation.

Quasi-homogeneous oxidation of glycerol by unsupported gold nanoparticles in the liquid phase.

A quasi-homogeneous solution of gold nanoparticles prepared by the Turkevich method was used as an unconventional catalyst in the oxidation of glycerol (GLY) in the liquid phase. The highest obtained conversion was 100 % after 3 h of reaction at 100 °C under an oxygen atmosphere (5 bar). The main products were glyceric, glycolic, formic, tartronic, and oxalic acid with selectivities of 28, 36, 25, 9, and 2 %, respectively. Traces of hydroxypyruvic and acetic acid were also detected (combined selectivities below 1 %). To elucidate the reaction mechanism and specify the role of gold nanoparticles in the oxidation process, a series of experiments under various reaction conditions were carried out. The effect of reaction temperature, oxygen pressure, gold concentration, and GLY/base molar ratio was investigated. All catalytic results were systematically compared to the corresponding noncatalytic base-induced transformations (blank tests). Such an approach allowed us to separate and clarify the respective driving parameters for the transformation of GLY (presence of a base and activity of the gold catalyst). The reaction mechanism comprised a series of oxidation and C-C cleavage reactions, whereas additional oxidation-reduction reactions (of the Cannizzaro type) could also occur in the presence of the base.

Transesterification of diethyl oxalate with phenol over sol-gel MoO(3)/TiO(2) catalysts.

The transesterification of diethyl oxalate (DEO) with phenol to form diphenyl oxalate (DPO) has been carried out in the liquid phase over very efficient MoO(3)/TiO(2) solid-acid sol-gel catalysts. A selectivity of 100 % with a remarkable maximum yield of 88 % were obtained, which opens the route to downstream phosgene-free processes for the synthesis of polycarbonates. Interpretation of the results of various acidity measurements (NH(3) and pyridine desorption, methanol oxidation as a probe reaction) allowed us to identify the catalytic sites as Lewis acid sites.

Regeneration of silica-supported silicotungstic acid as a catalyst for the dehydration of glycerol.

The dehydration reaction of glycerol to acrolein is catalyzed by acid catalysts. These catalysts tend to suffer from the formation of carbonaceous species on their surface (coking), which leads to substantial degradation of their performances (deactivation). To regenerate the as-deactivated catalysts, various techniques have been proposed so far, such as the co-feeding of oxygen, continuous regeneration by using a moving catalytic bed, or alternating between reaction and regeneration. Herein, we study the regeneration of supported heteropolyacid catalysts. We show that the support has a strong impact on the thermal stability of the active phase. In particular, zirconia has been found to stabilize silicotungstic acid, thus enabling the nondestructive regeneration of the catalyst. Furthermore, the addition of steam to the regeneration feed has a positive impact by hindering the degradation reaction by equilibrium displacement. The catalysts are further used in a periodic reaction/regeneration process, whereby the possibility of maintaining long-term catalytic performances is evidenced.

Towards the sustainable production of acrolein by glycerol dehydration.

The massive increase in biodiesel production by transesterification of vegatable oils goes hand-in-hand with the availability of a large volume of glycerol, which must be valorized. Glycerol dehydration to acrolein over acid catalysts is one of the most promising ways of valorization, because this compound is an important chemical intermediate used in, for example, the DL-methionine synthesis. In this Minireview, we give a detailed critical view of the state-of-the-art of this dehydration reaction. The processes developed in both the liquid and the gas phases are detailed and the best catalytic results obtained so far are reported as a benchmark for future developments. The advances on the understanding of the reaction mechanism are also discussed and we further focus particularly on the main obstacles for an immediate industrial application of this technology, namely catalyst coking and crude glycerol direct-use issues.

Amorphous oxide as a novel efficient catalyst for direct selective oxidation of methanol to dimethoxymethane.

We report for the first time the use of an amorphous oxide catalyst for the selective oxidation of methanol in the gas phase, leading at 553 K to the production of dimethoxymethane with a selectivity as high as 90% at high methanol conversion (68%).

Synthesis and structural characterization of a new nanoporous-like Keggin heteropolyanion salt: K3(H2O)4[H2SiVW11O40](H2O)8+x.

Single crystals of the potassium salt K3(H2O)4[H2SiVW11O40](H2O)8+x of the vanadium monosubstituted alpha-Keggin dodecatunsgstosilicate were grown from an aqueous solution and analyzed by EDS, XRD, vibration and electronic spectroscopy, and 1H, 51V, and 29Si solid-state NMR spectroscopy. Results indicate the formation of a nanoporous-like compound of hexagonal symmetry (space group P62) with large, water-filled channels running along the c axis. A uniform distribution of vanadium over the 12 metal sites of the alpha-Keggin anion is observed by XRD. Two different neighborhoods were characterized by 51V NMR in a 2:1 ratio (deltaiso=-546.3 and -536.2 ppm), in accordance with a difference in the number of potassium ions in the second coordination shell of vanadium.

Dimerization of mono-ruthenium substituted alpha-Keggin-type tungstosilicate [alpha-SiW11O39RuIII(H2O)]5- to micro-oxo-bridged dimer in aqueous solution: synthesis, structure, and redox studies.

We report the dimerization of a mono-ruthenium(III) substituted alpha-Keggin-type tungstosilicate [alpha-SiW(11)O(39)Ru(III)(H2O)](5-) to a micro-oxo-bridged dimer [{alpha-SiW(11)O(39)Ru(m)}2O](n-) (m = III, n = 12; m = IV/III, n = 11; m = IV, n = 10). Single crystal X-ray structure analysis of Rb(10)[{alpha-SiW(11)O(39)Ru(IV)}2O].9.5H2O (triclinic, P1, with a = 12.7650(6) A, b = 18.9399(10) A, c = 20.2290(10) A, alpha = 72.876(3) degrees, beta = 88.447(3) degrees, gamma = 80.926(3) degrees, V = 4614.5(4) A(3), Z = 2) reveals that two mono-ruthenium substituted tungstosilicate alpha-Keggin units are connected through micro-oxo-bridging Ru-O-Ru bonds. Solution (183)W-NMR of [{SiW(11)O(39)Ru(IV)}2O](10-) resulted in six peaks (-63, -92, -110, -128, -132, and -143 ppm, intensities 2 : 2 : 1 : 2 : 2 : 2) confirming that the micro-oxo bridged dimer structure is maintained in aqueous solution. The dimerization mechanism is presumably initiated by deprotonation of the aqua-ruthenium complex [alpha-SiW(11)O(39)Ru(III)(H2O)](5-) leading to a hydroxy-ruthenium complex [alpha-SiW(11)O(39)Ru(III)(OH)](6-). Dimerization of two hydroxy-ruthenium complexes produces the micro-oxo bridged dimer [{alpha-SiW(11)O(39)Ru(III)}2O](12-) and a water molecule. The Ru(III) containing dimer is oxidized by molecular oxygen to produce a mixed valence species [{alpha-SiW(11)O(39)Ru(IV-III)}2O](11-), and further oxidation results in the Ru(IV) containing [{alpha-SiW(11)O(39)Ru(IV)}2O](10-).