Peri-implant cell response on groove and pore-textured zirconia surfaces.

OBJECTIVES: This study aimed to assess the independent influence of grooves and pores texturized by milling on gold-standard zirconia implant surfaces. METHODS: Milled groove and pore textured with equivalent width, depth, and spacing on zirconia discs were produced using press and sintering techniques. All samples were sandblasted and acid-etched (SBAE), and untextured discs were used as controls. Osteoblasts and fibroblasts were cultured on discs for 14 days. Field emission gun-scanning electron microscopy (FEG-SEM) was used to observe cellular adhesion and morphology. Cell viability and proliferation assays were performed. Additionally, alkaline phosphatase activity, collagen type I, and osteopontin were evaluated at pre-defined time points. Results are presented as mean and standard deviation (SD), group comparisons were tested using one-way ANOVA (Tukey's post-hoc), and significance was set at P < 0.05. RESULTS: FEG-SEM images revealed cellular adhesion at 24 h in all samples with differences in distribution. Although both cell lines showed increased cell viability and differentiation cell markers such as collagen and osteopontin over time, statistically significant differences between groups were found in none of the quantitative study variables (P > 0.05). CONCLUSION: The results suggest similar cellular behavior between different patterns with similar dimensions and between them and microtopography by SBAE protocol currently used as the gold-standard for zirconia dental implants. The addition of pore and groove microtextures to the gold-standard zirconia dental implant surfaces treated with SBAE does not seem to be an asset in the cellular behavior of the hard and soft tissue cells.

Guided Bone Regeneration in the Edentulous Atrophic Maxilla Using Deproteinized Bovine Bone Mineral (DBBM) Combined with Platelet-Rich Fibrin (PRF)-A Prospective Study.

BACKGROUND: Bone regeneration procedures represent a major challenge in oral surgery. This study aimed to evaluate a composite PRF/particulate xenograft in guided bone regeneration. METHODS: Edentulous patients with horizontal ridge deficiencies in the anterior maxilla and candidates to an immediate-loading full-arch rehabilitation were included. Horizontal linear measurements indicating bone gain were assessed from computer beam computer tomography (CBCT) scans obtained at pre-surgery, post-surgery, and the 12-month follow-up. Mean bone values were presented as mean ± 95% CI. Non-parametric tests were used as appropriate, and the effect size was calculated with Cohen's d repeated measures. RESULTS: Eighteen patients were rehabilitated with 72 implants. The mean horizontal bone width was 4.47 [4.13-4.80] mm pre-surgically, 9.25 [8.76-9.75] mm post-surgically, and 7.71 [7.28-8.14] mm 12 months after. CONCLUSIONS: PRF associated with a xenograft seems to promote an effective horizontal bone gain. Randomized clinical trials are needed to confirm the benefits of this surgical approach.

Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior.

Yttria-stabilized zirconia (YSZ) is being proposed as an alternative material to Titanium for dental implants due to its aesthetic and biocompatibility properties. However, is it yet to define the optimal surface treatment to improve YSZ bioactivy. Texturization is a promising approach, but the biological role of patterned YSZ surfaces in cell cultures is yet to be determined. Thus, cellular behavior of osteoblasts and fibroblasts in contact with groove-texturized YSZ surfaces was investigated. YSZ discs were groove-textured by conventional milling and Nd:YAG laser. All samples including control were sandblasted and acid-etched. Human osteoblasts and fibroblasts were cultured on discs for 14 days. Morphology and cellular adhesion were observed. Cell viability, interleukin-1ß, osteopontin, collagen type I prodution, alkaline phosphatase activity, and interleukin-8 were measured. YSZ texturization by conventional milling improved osteoblasts viability and differentiation when compared to laser texturization. Fibroblasts behavior did not seem to be influenced by the texturing technique. Compared to sandblasting and acid etching currently used as gold standard for zirconia dental implants no superiority of macrotexturization was found.

Implant Survival in Immediately Loaded Full-Arch Rehabilitations Following an Anatomical Classification System-A Retrospective Study in 1200 Edentulous Jaws.

This retrospective study analyzed implant survival of immediate implant-supported fixed complete denture (IFCD) treatment options (TOs) based on the level of alveolar atrophy (CC). Records of 882 patients receiving a total of 6042 implants at one private referral clinic between 2004 and 2020 were considered. The mean follow-up period was 3.8 ± 2.7 years. Cumulative implant survival rates (CSRs) were analyzed as a function of CCs and TOs according to Mantel-Haenszel and Mantel-Cox. Hazard risk ratios for implant loss were compared using Cox regression. Confounding factors were identified using mixed Cox regression models. The 2- and 5-year CSRs were 98.2% and 97.9%, respectively. Maxillary 2- and 5-year CSRs were lower (97.7% and 97.3%) compared to mandibular CSRs (99.8% and 98.6%) (p = 0.030 and 0.0020, respectively). The CC did not influence CSRs of IFCDs in the mandible (p = 0.1483 and 0.3014, respectively) but only in the maxilla (p = 0.0147 and 0.0111), where CSRs decreased with increasing atrophy. TOs did not statistically differ in terms of survival rate for a given level of alveolar atrophy. The adaption of IFCD treatments to the level of atrophy and patient-specific risk factors can result in high CSRs, even at different levels of bone atrophy.

Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses.

The aim of this study was to characterize the mechanical properties of a bioactive-modified polyetheretherketone (PEEK) manufacturing approach for dental implants and to compare the in vitro biological behavior with titanium alloy (Ti6Al4V) as the reference. PEEK, PEEK with 5% hydroxyapatite (HA), PEEK with 5% beta-tricalcium phosphate (ßTCP), and Ti6Al4V discs were produced using hot pressing technology to create a functionally graded material (FGM). Surface roughness values (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness tests were performed. Human osteoblasts and gingival fibroblasts bioactivity was evaluated by a resazurin-based method, alkaline phosphatase activity (ALP), and confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts. Morphology and cellular adhesion were confirmed using field emission gun-scanning electron microscopy (FEG-SEM). Group comparisons were tested using analysis of variance (Tukey post hoc test), α = .05. All groups presented similar roughness values (P > .05). Ti6Al4V group was found to have the highest contact angle (P < .05). Shear bond strength and Vickers hardness of different PEEK materials were similar (P > .05); however, the mean values in the Ti6Al4V group were significantly higher when compared with those of the other groups (P < .05). Cell viability and proliferation of osteoblast and fibroblast cells were higher in the PEEK group (P < .05). PEEK-ßTCP showed the highest significant ALP activity over time (P < .05 at 14 days of culture). An enhanced bone and soft-tissue cell behavior on pure PEEK was obtained to the gold standard (Ti6Al4V) with equivalent roughness. The results substantiate the potential role of chemical composition rather than physical properties of materials in biological responses. The addition of 5% HA or ßTCP by FGM did not enhance PEEK mechanical properties or periodontal cell behavior.

Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique.

Adding a biological apatite layer to the implant surface enhances bone healing around the implant. Objective This study aimed to characterize the mechanical properties and test human gingival fibroblasts behavior in contact with Zirconia and Titanium bioactive-modified implant materials. Methodology 6 groups were considered: Titanium (Ti6Al4V), Ti6Al4V with 5% HA and 5% ßTCP, Zirconia (YTZP), YTZP with 5% HA and 5% ßTCP. For each group, we produced discs using a novel fabrication method for functionally graded materials, under adequate conditions for etching and grit-blasting to achieve equivalent surface microroughness among the samples. Surface roughness (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness were performed. Human gingival fibroblasts immortalized by hTERT gene from the fourth passage, were seeded on discs for 14 days. Cell viability and proliferation were assessed using a resazurin-based method, and cellular adhesion and morphology using field emission gun scanning electron microscopy (FEG-SEM). After 3 days of culture, images of fluorescent nucleic acid stain were collected by confocal laser scanning microscopy (CLSM). Results Results were presented as mean ± standard deviation (SD). We compared groups using one-way ANOVA with Tukey's post-hoc test, and significance level was set at p<0.05. After 14 days of culture, cell viability and proliferation were significantly higher in YTZP group than in other groups (p<0.05). Samples of YTZP-ßTCP presented significantly higher wettability (p<0.05); yet, we observed no improvement in cell behavior on this group. Fibroblast spreading and surface density were more evident on YTZP specimens. Adding calcium-phosphate bioactive did not alter the tested mechanical properties; however, Ti6Al4V material shear bond strength was statistically higher than other groups (p<0.05). Conclusion Adding bioactive materials did not improve soft-tissue cell behavior. When compared to other zirconia and titanium groups, pure zirconia surface improved adhesion, viability and proliferation of fibroblasts. Cell behavior seems to depend on surface chemical composition rather than on surface roughness.

Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants.

Zirconia has been regarded as a promising material for dental implants, and Nd:YAG laser treatment has been proposed as a potential strategy to improve its bioactivity. The main aim of the present study was to evaluate the in vitro behavior of human fetal osteoblasts in contact with laser-textured zirconia implant surfaces assessing the effect of different texture patterns, spacing between laser passes and number of laser passes. Zirconia discs were produced and treated with Nd:YAG laser according to test group variables: texture (microgrooves and micropillar array), distance between surface features (25 µm, 30 µm and 35 µm), and laser passes [1, 2, 4, and 8]. Untextured sandblasted and acid-etched zirconia discs (SBAE) were used as controls. Human osteoblasts (hFOB 1.19) were cultured for 14 days on test and control samples. Morphology and cellular adhesion were observed using scanning electron microscopy (SEM). Cell viability and proliferation were evaluated at 1, 3, 7, and 14 days using a commercial resazurin-based method. Collagen type I was evaluated at 3 days using ELISA. Alkaline phosphatase (ALP) activity was evaluated at 7 days using a colorimetric enzymatic technique. Group comparisons were tested using ANOVA or Mann-Whitney test (Tukey's post hoc) using statistical software, and significance was set at p < 0.05. Cell viability and proliferation increased over time for all groups with statistically higher values for laser-textured groups when compared with control at 7 and 14 days in culture (p < 0.05). Collagen type I levels were higher for study groups (p < 0.05) when compared with control group. No statistically differences were detected for ALP activity levels between texture and control groups (p > 0.05). The results suggest that laser-machined zirconia implant surfaces may benefit biological osteoblast response. However, the type of texture, spacing at the range of 25-35 µm, and number of laser passes did not seem to be relevant variables.

Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique

Abstract Adding a biological apatite layer to the implant surface enhances bone healing around the implant. Objective This study aimed to characterize the mechanical properties and test human gingival fibroblasts behavior in contact with Zirconia and Titanium bioactive-modified implant materials. Methodology 6 groups were considered: Titanium (Ti6Al4V), Ti6Al4V with 5% HA and 5% ßTCP, Zirconia (YTZP), YTZP with 5% HA and 5% ßTCP. For each group, we produced discs using a novel fabrication method for functionally graded materials, under adequate conditions for etching and grit-blasting to achieve equivalent surface microroughness among the samples. Surface roughness (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness were performed. Human gingival fibroblasts immortalized by hTERT gene from the fourth passage, were seeded on discs for 14 days. Cell viability and proliferation were assessed using a resazurin-based method, and cellular adhesion and morphology using field emission gun scanning electron microscopy (FEG-SEM). After 3 days of culture, images of fluorescent nucleic acid stain were collected by confocal laser scanning microscopy (CLSM). Results Results were presented as mean ± standard deviation (SD). We compared groups using one-way ANOVA with Tukey's post-hoc test, and significance level was set at p<0.05. After 14 days of culture, cell viability and proliferation were significantly higher in YTZP group than in other groups (p<0.05). Samples of YTZP-ßTCP presented significantly higher wettability (p<0.05); yet, we observed no improvement in cell behavior on this group. Fibroblast spreading and surface density were more evident on YTZP specimens. Adding calcium-phosphate bioactive did not alter the tested mechanical properties; however, Ti6Al4V material shear bond strength was statistically higher than other groups (p<0.05). Conclusion Adding bioactive materials did not improve soft-tissue cell behavior. When compared to other zirconia and titanium groups, pure zirconia surface improved adhesion, viability and proliferation of fibroblasts. Cell behavior seems to depend on surface chemical composition rather than on surface roughness.

Soft tissue replication in single unit implant impressions-A three dimensional clinical study.

OBJECTIVE: Comparison of soft tissue replication between conventional and digital impressions for definitive single unit implant rehabilitation in the esthetic zone. MATERIALS AND METHODS: Six patients were recruited according to inclusion criteria for this cross-over pilot study and submitted to a conventional silicone implant impression with customized coping and a digital impression with an intraoral scanner. Stereolithography files obtained from the same patient were superimposed with appropriate software and trueness evaluated between methods at predetermined locations (56 in hard and soft tissues and 18 in the emergence profile, per patient). Results were presented as mean root mean square (RMS) ± 95% confidence interval and effect size calculated with Hedges' g ± 95%. Mann-Whitney and Kruskal-Wallis were performed when appropriate and α was set at .05. RESULTS: Trueness between methods equated to 51.08[45.68;56.47] µm and 60.46[52.29;68.62] µm in hard and soft tissues, respectively. Soft tissue replication by intraoral scanner acquisition corresponded to a statistically significant RMS of 243.89[209.15;278.63] µm equating to a Hedges' g of 1.52[1.22;1.82] which corresponded to a large effect size. CONCLUSIONS: The proposed method could be considered for soft tissues assessment and the results suggest that intraoral impression techniques produce statistically significant changes in peri-implant soft tissue replication, although below the clinically detectable threshold. CLINICAL SIGNIFICANCE: The proposed technique allows for the 3D determination of peri-implant tissues changes in digital models with higher sensitivity than visual techniques, thus presenting itself as a promising alternative in clinical studies and that the use of an intraoral scanner obtained significant differences in the soft tissue emergence profile replication when compared with the gold standard.

Hard and Soft Tissue Cell Behavior on Polyetheretherketone, Zirconia, and Titanium Implant Materials

PURPOSE: The aim of this study was to characterize and compare the behavior of human osteoblasts and human gingival fibroblasts in contact with polyetheretherketone (PEEK), zirconia, and titanium implant surface materials. MATERIALS AND METHODS: PEEK, yttria-stabilized zirconia (YTZP), and titanium discs were produced under appropriate and similar conditions to achieve controlled surface features. Human osteoblasts and human gingival fibroblasts were cultured on discs for 14 days. Cell viability and proliferation were evaluated using a resazurin-based method. Morphology and cellular adhesion were observed using field emission gun-scanning electron microscopy (FEG-SEM). Alkaline phosphatase (ALP) activity and bone cell mineralization were evaluated on osteoblasts. Confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts were obtained at 7 and 14 days of the culture. Results were presented as mean and standard deviation (SD). Group comparisons were tested using analysis of variance (ANOVA) (Tukey's post hoc) with appropriate statistical software, and significance was set at P < .05. RESULTS: Cell viability and proliferation were higher in PEEK and YTZP groups compared with titanium on osteoblast cells (P < .05, all time points) and on fibroblasts (P < .05, 7 and 14 days). All groups showed an increase in ALP activity over time, which was not significant. Mineralization patterns demonstrated an increase in mineral content over time, which was more apparent in the YTZP group. Cell spreading was more evident on PEEK and YTZP specimens. CONCLUSION: The results suggest increased adhesion, viability, and proliferation of osteoblasts and gingival fibroblasts on zirconia and PEEK surfaces compared with titanium. These results are correlated with the increased wettability of these materials.