Comportamento ingestivo de cordeiros Santa Inês alimentados com resíduo de cervejaria desidratado / Ingestive behavior of Santa Ines lambs fed rations containing dehydrated brewery residue

Objetivou-se avaliar o comportamento ingestivo de cordeiros Santa Inês alimentados com resíduo de cervejaria desidratado (RCD). Foram utilizados 35 cordeiros, machos, não castrados, com peso médio inicial de 16,00±1,69kg e, aproximadamente, 70 dias de idade. Adotou-se o delineamento inteiramente ao acaso, com cinco tratamentos e sete repetições, consistindo os tratamentos em: 0; 20; 40; 60 e 80% de inclusão de RCD na porção concentrada da ração. A inclusão de RCD na ração não influenciou o tempo de alimentação (TAL; h/dia) e a eficiência de alimentação (gFDN/h; P>0,05). O TAL obtido neste estudo apresentou valor médio de 4,90h/dia. Observou-se efeito linear decrescente (P<0,05) com a inclusão do RCD, para as eficiências de alimentação (gMS/h) e ruminação (gMS/h e gFDN/h). Contudo, efeito linear crescente (P<0,05) foi constatado para tempo de ruminação e mastigação total, bem como para o número de mastigações merícicas por dia para os animais alimentados com o subproduto. A inclusão de resíduo de cervejaria desidratado influencia o comportamento ingestivo de cordeiros Santa Inês, diminuindo a eficiência de alimentação, quando relacionada ao consumo de matéria seca por hora, e aumentando o tempo de ruminação, podendo ser adicionado em até 20% na porção concentrada da ração.(AU)

The aim of this study was to evaluate the ingestive behavior of Santa Ines lambs fed dehydrated brewer's residue (DBR). Thirty-five male lambs were used, with an initial mean weight of 16.00±1.69kg and, approximately, 70 days of age. A completely randomized design was used, with five treatments and seven replicates, the treatments being: 0; 20; 40; 60 and 80% of inclusion of DBR in the concentrated portion of the ration. The inclusion of DBR in the ration did not influence feeding time (FT; h/day) and feeding efficiency (gNDF/h; P> 0.05). The FT obtained in this study had an average value of 4.90h/day. There was a decreasing linear effect (P< 0.05) for feed efficiency (gDM/h) and rumination efficiency (gDM/h and gNDF/h). However, linear increasing effect (P< 0.05) was observed for rumination and total chewing time, as well as for the number of chews per day for animals fed with the byproduct. The inclusion of dehydrated brewer's residue in the concentrate can influence the ingestive behavior of Santa Ines lambs, reducing feed efficiency, when related to the dry matter intake per hour, and increasing the total rumination time in Santa Ines lambs, it can be added up to 20% in the concentrated portion of the ration.(AU)

Mutational analysis of the genes encoding RFamide-related peptide-3, the human orthologue of gonadotrophin-inhibitory hormone, and its receptor (GPR147) in patients with gonadotrophin-releasing hormone-dependent pubertal disorders.

RFamide-related peptide-3 (RFRP-3), the orthologue of avian gonadotrophin-inhibitory hormone, and its receptor GPR147 have been recently identified in the human hypothalamus, and their roles in the regulation of reproductive axis has been studied. The present study aimed to investigate whether the presence of variants in the genes encoding human RFRP-3 (NPVF gene) and its receptor, GPR147 (NPFFR1 gene), is associated with the occurrence of gonadotrophin-releasing hormone-dependent pubertal disorders. Seventy-eight patients with idiopathic central precocious puberty (CPP) and 51 with normosmic isolated hypogonadotrophic hypogonadism (nIHH) were investigated. Fifty healthy subjects comprised the control group. The coding sequences of the NPVF and NPFFR1 genes were amplified and sequenced. Odds ratios (OR) were used to estimate the likelihood of CPP or nIHH in the presence of the described polymorphisms. All such polymorphisms have already been registered in the National Center for Biotechnology Information database. A three-nucleotide in frame deletion was identified in the NPVF gene (p.I71_K72), with a smaller proportion in the CPP (5%) compared to the nIHH (15%) group (P = 0.06). This results in the deletion of the isoleucine at position 71, adjacent to lysine at an endoproteolytic cleavage site of the precursor peptide. This polymorphism was associated with a lower risk of CPP (OR = 0.33; 95% confidence interval = 0.08-0.88); interestingly, only two men with nIHH were homozygotes for this variant. A total of five missense polymorphisms were found in the NPFFR1 gene, which encodes GPR147, with similar frequencies among groups and no association with pubertal timing. Our data suggest that RFRP-3/GPR147 may play secondary, modulatory roles on the regulation of pubertal development; a restraining modulatory effect of the NPVF p.I71_K72 variant on the activation of the gonadotrophic axis cannot be ruled out and deserves further investigation.

Application of digital image processing for the generation of voxels phantoms for Monte Carlo simulation.

This paper presents the application of a computational methodology for optimizing the conversion of medical tomographic images in voxel anthropomorphic models for simulation of radiation transport using the MCNP code. A computational system was developed for digital image processing that compresses the information from the DICOM medical image before it is converted to the Scan2MCNP software input file for optimization of the image data. In order to validate the computational methodology, a radiosurgery treatment simulation was performed using the Alderson Rando phantom and the acquisition of DICOM images was performed. The simulation results were compared with data obtained with the BrainLab planning system. The comparison showed good agreement for three orthogonal treatment beams of (60)Co gamma radiation. The percentage differences were 3.07%, 0.77% and 6.15% for axial, coronal and sagital projections, respectively.

Percentage depth dose evaluation in heterogeneous media using thermoluminescent dosimetry.

The purpose of this study is to investigate the influence of lung heterogeneity inside a soft tissue phantom on percentage depth dose (PDD). PDD curves were obtained experimentally using LiF:Mg,Ti (TLD-100) thermoluminescent detectors and applying Eclipse treatment planning system algorithms Batho, modified Batho (M-Batho or BMod), equivalent TAR (E-TAR or EQTAR), and anisotropic analytical algorithm (AAA) for a 15 MV photon beam and field sizes of 1 x 1, 2 x 2, 5 x 5, and 10 x 10 cm 2 . Monte Carlo simulations were performed using the DOSRZnrc user code of EGSnrc. The experimental results agree with Monte Carlo simulations for all irradiation field sizes. Comparisons with Monte Carlo calculations show that the AAA algorithm provides the best simulations of PDD curves for all field sizes investigated. However, even this algorithm cannot accurately predict PDD values in the lung for field sizes of 1 x 1 and 2 x 2 cm 2 . An overdosage in the lung of about 40% and 20% is calculated by the AAA algorithm close to the interface soft tissue/lung for 1 x 1 and 2 x 2 cm 2 field sizes, respectively. It was demonstrated that differences of 100% between Monte Carlo results and the algorithms Batho, modified Batho, and equivalent TAR responses may exist inside the lung region for the 1 x 1 cm 2 field.

Photon doses at the entrance of 60Co and low-energy medical accelerator rooms under unusual irradiation conditions.

In this paper, the general-purpose Monte Carlo code MCNP5 was used to study the dose variance due to the position of medical linear accelerators, under unusual conditions, for shielding design of radiotherapy facilities. It was found that the computational methods generally used to estimate the scattered photon doses at the entrance of radiotherapy unit vaults provide conservative results when compared with the MCNP results, considering the standard condition. On the other hand, for the situations where the axis of gantry rotation is redirected at, for example, 45 degrees with respect to the walls of the room, the photon doses at the entrance can reach values up to seven times higher than those obtained under the standard condition, depending on the energy of the primary beam.

On the production of neutrons in laminated barriers for 10 MV medical accelerator rooms.

When space limitations are primary constraints, laminated barriers with metals can be an option to provide sufficient shielding for a radiotherapy treatment room. However, if a photon clinical beam with end point energy of 10 MeV or higher interacts with the metal inside the barriers neutrons are ejected and can result in an exposure problem inside and outside the vault. The empirical formulae existing in the literature to estimate neutron dose equivalents beyond laminated barriers do not take into account neutron production for spectra below 15 MV. In this work, the Monte Carlo code MCNP was used to simulate the production and transport of photoneutrons across primary barriers of 10 MV accelerator treatment rooms containing lead or steel, in order to obtain the ambient dose equivalents produced by these particles outside the room and in the patient plane. It was found that the neutron doses produced are insignificant when steel is present in the primary barriers of 10 MV medical accelerators. On the other hand, the results show that, in all cases where lead sheets are positioned in the primary barriers, the neutron ambient dose equivalents outside the room generally exceed the shielding design goal of 20 microSv/week for uncontrolled areas, even when the lead sheets are positioned inside the treatment room. Moreover, for laminated barriers, the photoneutrons produced in the metals are summed with the particles generated in the accelerator head shielding and can represent a significant component of additional dose to the patients. In this work, it was found that once lead sheets are positioned inside the room, the neutron ambient dose equivalents can reach the value of 75 microSv per Gray of photon absorbed dose at the isocenter. However, for all simulated cases, a tendency in the reduction of neutron doses with increasing lead thickness can be observed. This trend can imply in higher neutron ambient dose equivalents outside the room for thinner lead sheets. Therefore, when a medical accelerator treatment room is designed with laminated barriers to receive equipment with an end point energy equal to or higher than 10 MeV, not only the required shielding thickness for photon radiation attenuation should be considered, but also the dose due to photoneutrons produced in the metal, which may involve an increase of the lead thickness or even the use of neutron shielding.

Modelling the elastic scattering in diagnostic radiology: the importance of structure form factors.

The importance of structure form factors in describing elastic scattering in diagnostic radiology was studied through a Monte Carlo code built to reproduce scattering in large water samples. The code, developed by us, considers all relevant interactions, including multiple scattering and interference due to scattering by the liquid structure. Geometrical conditions and energies similar to those found in radiology were used. The secondary to primary radiation ratio using the usual free atom approximation and the structure form factor was obtained and both approaches were compared. Calculations of radiological parameters such as the angular distribution of photons incident on the detector and the fraction of scattered photons stopped by anti-scattering grids were also performed considering mammography, thorax and abdomen radiography conditions. The results have shown that S(beta)/P depends on the experimental set-up, being more important for low momentum transfers and sample sizes for which the multiple scattering is not expected to be significant, as in the case of mammography. It was also verified that large samples increase the probability of multiple scattering, masking the structure peak in S(beta) and making the sample structure important just for relatively thin samples. Considering mammography-like geometry, the maximum of the S(beta)/P distribution considering structure form factors occurs around 15 degrees while the correspondent maximum without considering the structure factors occurs around 10 degrees for any sample thickness. S(beta)/P is almost independent of the irradiation field, with the maximum remaining at 15 degrees and 10 degrees for the SFF and FAFF, respectively. The cases studied in this paper stress some conditions in which it is mandatory to use SFF, but since it requires no further significant efforts, the SFF approach is recommended as a standard procedure when describing the elastic scattering process in radiology.

Placas radiográficas amplificadoras: estudo da contribuiçäo dos raios-x secundários / Amplifier radiographic plaques: contribuition study of secundary x-rays

Placas amplificadoras fluorescentes para filmes de raio-X são usadas em radiologia a fim de reduzir a dose de radiação. Estas placas produzem luz visível que aumenta a eficiência do filme. Adicionalmente, raios-X secundários são originados devido à efeito fotoelétrico, espalhamento elástico (Rayleigh( e inelástico (Compton). A taxa de contagem e a distribuição angular destes raios-X foram medidos, mostrando que a razão da radiação secundária pela primária incidente no filme de raio-X é cerca de 20 por cento.

To reduce the radiation dose in radiology, fluorescent intensifying screens for X-ray films are used. They produce visible light which increases the efficiency of the film. ln addition, secondary X-rays arise due to the photoelectric effect, elastic (Rayleigh) and inelastic (Compton) scattering. The counting rate and angular distribution of these X-rays were measured, showing that the ratio of secondary-to-primary radiation incident on the X-ray film is about 20 %