Fourth stable radical species in X-irradiated solid-state sucrose.

High-energy radiation produces radicals in crystalline sucrose. As such, sucrose is considered as a relevant model system for studying radiation damage to the sugar units of DNA. Many of these radicals are stable, detectable at room temperature with electron paramagnetic resonance (EPR) and their concentration is proportional to the absorbed dose in a considerable range. This makes sucrose also an interesting system for dosimetry. Dose assessment protocols rely on measurements of the total intensity of the EPR powder spectrum, so it is likely that they could be further improved if the composite nature of the spectrum was understood completely. Recently, it was shown that the three known stable radicals can only account for the central part of the spectrum and that features in the wings remain unidentified. In this work, we show, based on the analysis of the powder EPR patterns recorded at three microwave frequencies, that the contribution of one more species is sufficient to explain the entire spectrum. The determination of the spin Hamiltonian parameters is corroborated by a Q-band (34 GHz) single crystal electron-nuclear double resonance (ENDOR) analysis. The chemical structure of the fourth species is explored by analysis of the determined g and four (1)H hyperfine (HF) tensors, and verified using density functional theory (DFT) calculations. The ENDOR spectrum of the largest HF interaction of the fourth species was exploited to isolate the radical's absorption-like EPR spectrum from a multicomponent powder pattern.

Mechanism of the CuII-catalyzed benzylic oxygenation of (aryl)(heteroaryl)methanes with oxygen.

A mechanistic study of the copper-catalyzed oxidation of the methylene group of aryl(di)azinylmethanes was performed. Initial reaction rates were measured making use of in situ IR reaction monitoring and a kinetic analysis of the reaction was executed. The reaction proved to be first order in oxygen concentration. For substrate and acid concentration, saturation kinetics due to O2 mass transfer limitation were observed. The occurrence of mass transfer limitation was further confirmed by examining the effect of the stirring rate on the initial reaction rate. Interestingly, the effect of the concentration of the catalyst on the rate shows that higher loadings result in a maximal initial rate, followed initially by a steady decrease and subsequently a rate plateau when the concentration is increased further. Mass transfer limitation and increased concentration of dinuclear catalytically active species rationalizes this hitherto unprecedented rate behavior. Continuous-wave and pulsed electron paramagnetic resonance methods were used to characterize the catalytic species present in the solution during the reaction and confirmed the presence of both mono- and dinuclear copper species. Analysis of a diverse substrate scope points towards imine-enamine tautomerization as a crucial process in the oxidation reaction. DFT calculations of these equilibrium constants (pKeq) provided us with a qualitative tool to predict whether or not a substrate is viable for oxidation under the reaction conditions developed.

Multi-frequency (S, X, Q and W-band) EPR and ENDOR Study of Vanadium(IV) Incorporation in the Aluminium Metal-Organic Framework MIL-53.

Doping the well-known metal-organic framework MIL-53(Al) with vanadium(IV) ions leads to significant changes in the breathing behaviour and might have repercussions on the catalytic behaviour as well. To understand the properties of such a doped framework, it is necessary to determine where dopant ions are actually incorporated. Electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) are applied to reveal the nearest environment of the paramagnetic vanadium(IV) dopant ions. EPR spectra of as-synthesised vanadium-doped MIL-53 are recorded at S-, X-, Q- and W-band microwave frequencies. The EPR spectra suggest that at low dopant concentrations (1.0-2.6 mol %) the vanadium(IV) ions are well dispersed in the matrix. Varying the vanadium dopant concentration within this range or the dopant salt leads to the same dominant EPR component. In the ENDOR spectra, hyperfine (HF) interactions with (1) H, (27) Al and (51) V nuclei are observed. The HF parameters extracted from simulations strongly suggest that the vanadium(IV) ions substitute Al in the framework.

Effects of copper and vanadium deposition in multi-walled hydrogen trititanate and mixed-phase anatase/trititanate nanotubes.

Metal incorporation and doping is one of the routes commonly explored to improve visible light photocatalytic activity of titania and related materials. In this work, we explore the effect of copper and vanadium deposition and incorporation in multi-walled hydrogen trititanate and mixed-phase anatase/trititanate nanotubes. The molecular designed dispersion method is used to introduce the metals in the materials. Electron paramagnetic resonance facilitates a full characterization of the metal sites before and after calcination and allows determining the UV- and visible-light-induced formation of paramagnetic intermediates. Vanadium or copper deposition on the tubes leads to increased formation of F(+) centres under visible or UV illumination. The EPR results are linked to the activity towards rhodamine 6G photobleaching of the different materials.

Interactions of an asymmetric amine with a non-C2 symmetric Cu-salen complex: an EPR/ENDOR and HYSCORE investigation.

Single enantiomers of R-/S-methylbenzylamine (MBA) were found to selectively form adducts with the chiral non-C(2) symmetric Cu-salen complex N-(3,5-di-tert-butylsalicylidene)-N'-(salicylidene)-cyclohexane-1,2-diamine copper(II), hereafter labelled [Cu(3)]. The g/A spin Hamiltonian parameters of this Cu(II) complex showed a decrease in symmetry from axial to rhombic upon formation of the [Cu(3)] + MBA adducts. The selectivity in enantiomeric discrimination was found to be only 59 ± 5% in favour of the heterochiral R,R'-[Cu(3)] + S-MBA and S,S'-[Cu(3)] + R-MBA adducts. This was directly evidenced by W-band EPR spectroscopy. The observed low selectivity for enantiomer discrimination is primarily attributed to the loss of the bulky tert-butyl groups from the 3,5 positions of [Cu(3)] compared to the parent N,N'-bis(3,5-di-tert-butylsalicylidene)-cyclohexane-1,2-diamine copper(II) ligand (labelled [Cu(1)]). The structure of the [Cu(3)] complex in the presence and absence of coordinating amine was further investigated by analysis of the ligand hyperfine interactions, as revealed through Q-band CW-ENDOR, X-band Davies ENDOR and HYSCORE. (1)H couplings from the -NH(2) group of the amine, observed by ENDOR and HYSCORE, provided direct evidence of amine coordination.

Visualizing diastereomeric interactions of chiral amine-chiral copper salen adducts by EPR spectroscopy and DFT.

Single enantiomers of R/S-methylbenzylamine (MBA) were found to selectively form adducts with two chiral Cu-salen complexes, [Cu(II)(1)] (H(2)1 = N,N'-bis(3,5-ditert-butylsalicylidene)-1,2-diaminocyclohexane) and [Cu(II)(2)] (H(2)2 = N,N'-bis-salicylidene-1,2-cyclohexanediamino). The axial g/A spin Hamiltonian parameters of the Cu-MBA adducts were typical of 5-coordinate species. Enantiomer discrimination in the MBA binding was directly evidenced by W-band CW EPR, revealing an 86 ± 5% preference for formation of the R,R-[Cu(1)] + S-MBA adducts compared to R,R-[Cu(1)] + R-MBA; this was reduced to a 57 ± 5% preference for R,R-[Cu(2)] + S-MBA following removal of the tert-butyl groups. The structure of these diastereomeric adducts was further probed by different hyperfine techniques (ENDOR and HYSCORE), although no structural differences were detected between these adducts using these techniques. The diastereomeric adducts were found to possess lower symmetry, as evidenced by rhombic g tensors and inequivalent H(imine) couplings. This was caused by the selective binding mode of MBA onto one side of the chiral Cu(II) complex. DFT calculations were performed on the R,R-[Cu(1)] + S-MBA and R,R-[Cu(1)] + R-MBA adducts. A distinct difference in orientation and binding mode of the MBA was identified in both adducts, confirming the experimental results. The preferred heterochiral R,R-[Cu(1)] + S-MBA adduct was found to be 5 kJ mol(-1) lower in energy compared to the homochiral adduct. A delicate balance of steric repulsion between the α-proton (attached to the asymmetric carbon atom) of MBA and the methine proton (attached to the asymmetric carbon atom) of [Cu(1)] was crucial in the stereoselective binding.

Molding and replication of ceramic surfaces with nanoscale resolution.

The design of reproducible and more efficient nanofabrication routes has become a very active research field in recent years. In particular, the development of new methods for micro- and nanopatterning materials surfaces has attracted the attention of many researchers in industry and academia as a consequence of the growing relevance of patterned surfaces in many technological fields, ranging from optoelectronics to biotechnology. In this work we explore, discuss, and demonstrate the possibility of extending the well-known molding and replication strategy for patterning ceramic materials with nanoscale resolution. To achieve this goal we have combined physical deposition methods, molecule-thick anti-sticking coatings, and nanostructured substrates as master surfaces. This new perspective on an "old technology", as molding is, provides an interesting alternative for high-resolution, direct surface-relief patterning of materials that currently requires expensive and time-consuming lithographic approaches.