ABSTRACT
A finite element (FE) elbow model was developed to predict the contact stress and contact area of the native humeroradial joint. The model was validated using Fuji pressure sensitive film with cadaveric elbows for which axial loads of 50, 100, and 200 N were applied through the radial head. Maximum contact stresses ranged from 1.7 to 4.32 MPa by FE predictions and from 1.34 to 3.84 MPa by pressure sensitive film measurement while contact areas extended from 39.33 to 77.86 mm2 and 29.73 to 83.34 mm2 by FE prediction and experimental measurement, respectively. Measurements from cadaveric testing and FE predictions showed the same patterns in both the maximum contact stress and contact area, as another demonstration of agreement. While measured contact pressures and contact areas validated the FE predictions, computed maximum stresses and contact area tended to overestimate the maximum contact stress and contact area.
Subject(s)
Elbow Joint , Finite Element Analysis , Humerus , Mechanical Phenomena , Models, Biological , Pressure , Biomechanical Phenomena , Female , Humans , Male , Middle Aged , Stress, MechanicalABSTRACT
Developing appropriate mathematical models for biological soft tissues such as ligaments, tendons, and menisci is challenging. Stress-strain behavior of these tissues is known to be continuous and characterized by an exponential toe region followed by a linear elastic region. The conventional curve-fitting technique applies a linear curve to the elastic region followed by a separate exponential curve to the toe region. However, this technique does not enforce continuity at the transition between the two regions leading to inaccuracies in the material model. In this work, a Continuous Method is developed to fit both the exponential and linear regions simultaneously, which ensures continuity between regions. Using both methods, three cases were evaluated: idealized data generated mathematically, noisy idealized data produced by adding random noise to the idealized data, and measured data obtained experimentally. In all three cases, the Continuous Method performed superiorly to the conventional technique, producing smaller errors between the model and data and also eliminating discontinuities at the transition between regions. Improved material models may lead to better predictions of nonlinear biological tissues' behavior resulting in improved the accuracy for a large array of models and computational analyses used to predict clinical outcomes.
Subject(s)
Ligaments/physiology , Menisci, Tibial/physiology , Models, Biological , Nonlinear Dynamics , Stress, Mechanical , Tendons/physiology , Computer Simulation , Elasticity , Linear Models , Tensile Strength , ViscosityABSTRACT
BACKGROUND: Total ankle arthroplasty (TAA) is becoming an effective treatment for end-stage ankle arthritis. It is unknown if TAA alters the patient's ability to sense ankle joint position. MATERIALS AND METHODS: Thirteen unilateral TAA patients with a minimum of 2-years followup completed proprioceptive testing of the TAA and the contralateral side. The task was to reproduce a given ankle angle using a joystick-driven device while the lower limb was obscured from view. Nine angles were tested, including two angles in dorsiflexion, three in plantarflexion, two in inversion, and two in eversion. A repeated-measures ANOVA was used to evaluate the results. RESULTS: No statistically significant differences between the TAA ankle and the contralateral side were found. CONCLUSION: TAA does not cause a change in proprioceptive abilities in arthritis patients when compared to the contralateral, unaffected side in a small sample of unilateral patients. Surgeons and rehabilitation professionals may use this information when designing rehabilitation plans following the insertion of a TAA.
