Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
Talanta ; 45(1): 137-46, 1997 Dec 12.
Article in English | MEDLINE | ID: mdl-18966989

ABSTRACT

Results obtained from a preliminary investigation of the performance of a flat sheet membrane desolvator (FSMD) utilizing dual hydrophobic polypropylene membranes with an average pore size of 0.05 mum and a 50 +/- 5 mum thickness are reported. The membranes have a desolvation area of 241 cm(2). The volume-to-surface area ratio is 0.3 cm. Using the FSMD with an ultrasonic nebulizer (USN), aqueous solvent desolvation efficiencies of greater than 99.9% were obtained at all nebulizer gas flow rates investigated (0.8, 1.2, and 1.8 l min(-1)). This efficient desolvation occurred when the countercurrent gas flow rate was equal to or slightly greater than the applied nebulizer gas flow rate. Under these conditions preconcentration factors of 18, 44, and 590 were observed with flows of 0.8, 1.2 and 1.8 l min(-1), respectively. Operating with countercurrent gas flow rates much higher than the nebulizer gas flow rates leads to a significant reduction in analyte flux, thus increasing detection limits. Depending on the nebulizer and countercurrent gas flow rate conditions, the FSMD contributed between 10-40% to the overall analyte loss in the system. The lowest detection limit observed for aqueous copper with the USN-FSMD system is 0.4 ppb at nebulizer and countercurrent gas flow rates of 1.2 and 1.4 l min(-1), respectively. At this nebulizer gas flow rate, replacing the FSMD in the system with a commercial tubular membrane desolvator, MDX100, gave a lowest Cu detection limit of 0.2 ppb at a countercurrent gas flow rate of 1.2 l min(-1). These detection limits represents improvements over the 0.7 and 8 ppb obtained with USN and pneumatic nebulization, respectively.

2.
Anal Chem ; 61(7): 674-7, 1989 Apr 01.
Article in English | MEDLINE | ID: mdl-2719264

ABSTRACT

The determination of aqueous fluoride by flow injection analysis (FIA) with a helium microwave-induced plasma (He-MIP) is described. This system operates at 500 W and utilizes a modified TM010 resonator cavity with a demountable plasma torch. Both direct nebulization and FIA in conjunction with ultrasonic nebulization (USN) were investigated. FIA was found to be the most reliable method because extended nebulization of aqueous fluoride was found to cause memory effects. Detection limits for aqueous fluoride of 35 and 4 ppm were observed for FIA and direct USN, respectively. The interference effects of pH and selected elements were also studied.


Subject(s)
Fluorides/analysis , Microwaves , Helium , Solutions
SELECTION OF CITATIONS
SEARCH DETAIL
...