Dinuclear group IV metal complexes based on a bis(indenyl)-(E/Z)-stilbene platform: a potential prototype of "photoswitchable" catalysts for olefin polymerization.

The preparation of dizirconium complexes based on a novel bis(indenyl)-(E/Z)-stilbene platform was explored. Negishi coupling between the in situ-generated diorganozincates obtained from the respective o/m/p-(E/Z)-dibromostilbenes and the bromo-functionalized zirconocene (η5-Cp*)(η5-2-methyl-4-bromoindenyl)ZrCl2, or, alternatively, the preparation of bis(indene)stilbene pro-ligands {o/m/p-(E/Z)-BisIndSB}H2 through Negishi coupling of the corresponding dibromostilbenes with 4-bromoindene and subsequent metallation/transmetallation with Cp*ZrCl3 or Zr(NMe2)4, allowed the preparation of a series of dinuclear complexes. These were analyzed by NMR spectroscopy and some of them by iASAP-mass spectrometry and by X-ray diffraction studies. Experimental results were compared with DFT modelling of the targeted dinuclear complexes evidencing that the (E)-complexes are more stable by 7-11 kcal mol-1 than their (Z)-analogues. Thermal, uncontrolled isomerization of (Z)- to (E)-stilbene platform was observed experimentally for some systems, in the course of their synthesis, either from the (Z)-dibromostilbene reagent or on the dinuclear complexes resulting from the Negishi coupling. Photoisomerization of the (E)- and (Z)-{BisIndSB}H2 proligands and of complexes {o-(E)-BisIndSB}(Zr(NMe2)3)2 and {m-(E)-BisIndSB}(ZrCl2Cp*)2 was investigated under a variety of conditions. It proved effective for the proligands but induced decomposition of the dizirconium complexes. Time-dependent DFT (TD-DFT) computations were performed to identify unambiguously the nature of the observed absorption bands and account for decomposition of the complexes. Preliminary ethylene/1-hexene homo- and copolymerization investigations did not evidence putative cooperativity phenomena within these dinuclear systems nor significantly differentiated behavior between the (Z)- and (E)-isomers of a given type of complex under the reaction conditions investigated.

Barium phosphidoboranes and related calcium complexes.

The attempted synthesis of [{Carb}BaPPh2] (1) showed this barium-phosphide and its thf adducts, 1·thf and 1·(thf)2, to be unstable in solution. Our strategy to circumvent the fragility of these compounds involved the use of phosphinoboranes HPPh2·BH3 and HPPh2·B(C6F5)3 instead of HPPh2. This allowed for the synthesis of [{Carb}Ae{PPh2·BH3}] (Ae = Ba, 2; Ca, 3), [{Carb}Ca{(H3B)2PPh2}·(thf)] (4), [{Carb}Ba{PPh2·B(C6F5)3}] (5), [{Carb}Ba{O(B(C6F5)3)CH2CH2CH2CH2PPh2}·thf] (6), [Ba{O(B(C6F5)3)CH2CH2CH2CH2PPh2}2·(thf)1.5] (7) and [Ba{PPh2·B(C6F5)3}2·(thp)2] (8) that were characterised by multinuclear NMR spectroscopy (thp = tetrahydropyran). The molecular structures of 4, 6 and 8 were validated by X-ray diffraction crystallography, which revealed the presence of Ba⋯F stabilizing interactions (ca. 9 kcal mol-1) in the fluorine-containing compounds. Compounds 6 and 7 were obtained upon ring-opening of thf by their respective precursors, 5 and the in situ prepared [Ba{PPh2·B(C6F5)3}2]n. By contrast, thp does not undergo ring-opening under the same conditions but affords clean formation of 8. DFT analysis did not highlight any specific weakness of the Ba-P bond in 1·(thf)2. The instability of this compound is instead thought to stem from the high energy of its HOMO, which contains the non-conjugated P lone pair and features significant nucleophilic reactivity.

C 1-Symmetric {cyclopentadienyl/indenyl}-metallocene catalysts: synthesis, structure, isospecific polymerization of propylene and stereocontrol mechanism.

A series of new Me2Si-bridged cyclopentadiene/indene proligands {Me2Si(R2',5'2-R3',4'2-Cp)(R2,R4,R5,R6-Ind)H2} (1a-j) with various substitutions both on the indene and cyclopentadiene moieties was prepared. The corresponding C1-symmetric group 4 ansa-metallocene complexes (M = Zr, Hf), namely, {Me2Si(Me4Cp)(Ind)}ZrCl2 (2a-Zr), {Me2Si(Me4Cp)(2-Me,4-Ph-Ind)}MCl2 (2b-M), {Me2Si(Me4Cp)(2-Me,4-Ph,6-tBu-Ind)}ZrCl2 (2c-Zr), {Me2Si(Me4Cp)(2-Me,4-Ph,5-OMe,6-tBu-Ind)}MCl2 (2d-M), {Me2Si(Me4Cp)(2-R',4-(3',5'-tBu2,4'-OMe-C6H2),5-OMe,6-tBu-Ind)}ZrCl2, R' = Me (2e-Zr), R' = Et (2f-Zr), {Me2Si(2,5-Ph2-3,4-Me2-Cp)(2-Me,4-(3',5'-tBu2,4'-OMe-C6H2),5-OMe,6-tBu-Ind)}ZrCl2 (2g-Zr), {Me2Si(Me4Cp)(2-Me,4-(3',6'-tBu2-carbazol-4'-yl)-Ind)}ZrCl2 (2h-Zr), {Me2Si(2,5-Me2,3,4-iPr2-Cp)(2-Me,4-Ph-Ind)}ZrCl2 (2i-Zr), {Me2Si(2,5-Me2,3,4-iPr2-Cp)(2-Me,4-Ph,6-tBu-Ind)}ZrCl2 (2j-Zr) and {Me2Si(Me4Cp)(2-Me-4,5-[a]anthracene-Ind)}MCl2 (2k-Zr) were synthesized and characterized by NMR spectroscopy and mass spectrometry. The solid-state molecular structures of 2b-Zr, 2d-Zr, 2e-Zr, 2f-Zr, 2j-Zr and 2k-Zr were determined by X-ray crystallography. The zirconocene complexes, once activated with MAO in toluene solution, exhibited propylene polymerization activities at 60 °C up to 161 000 kg(PP) mol(Zr)-1 h-1, affording highly isotactic polypropylenes (iPP) with [m]4 up to 96.5% and Tm up to 157 °C. Also, metallocene complexes 2b-e-Zr were supported on SiO2-MAO and evaluated in slurry bulk propylene polymerization at 70 °C, producing iPPs with [m]4 = 91.7-96.6 mol% and low regiodefects (0.2-0.3 mol%) content, with productivities up to 636 000 kg(PP) mol(Zr)-1 h-1. DFT calculations allowed rationalizing a polymerization reaction mechanism occurring through "chain-stationary" enchainment with preference for 1,2-insertions.

Polythioesters Prepared by Ring-Opening Polymerization of Cyclic Thioesters and Related Monomers.

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters with a wide range of applications; in particular, they currently stand as promising alternatives to conventional polyolefin-based "plastics". The introduction of sulfur atoms within the PHAs backbone can endow the resulting polythioesters (PTEs) with differentiated, sometimes enhanced thermal, optical and mechanical properties, thereby widening their versatility and use. Hence, PTEs have been gaining increasing attention over the past half-decade. This review highlights recent advances towards the synthesis of well-defined PTEs by ring-opening polymerization (ROP) of cyclic thioesters - namely thiolactones - as well as of S-carboxyanhydrides and thionolactones; it also covers the ring-opening copolymerization (ROCOP) of cyclic thioanhydrides or thiolactones with epoxides or episulfides. Most of the ROP reactions described are of anionic type, mediated by inorganic, organic or organometallic initiators/catalysts, along with a few enzymatic reactions as well. Emphasis is placed on the reactivity of the thio monomers, in relation to their ring-size ranging from 4- to 5-, 6- and 7-membered cycles, the nature of the catalyst/initiating systems implemented and their efficiency in terms of activity and control over the PTE molar mass, dispersity, topology, and microstructure.

Meso- and Rac-[bis(3-phenyl-6-tert-butylinden-1-yl)dimethylsilyl]zirconium Dichloride: Precatalysts for the Production of Differentiated Polyethylene Products with Enhanced Properties.

Ansa-zirconocene complexes are widely employed as precatalysts for olefin polymerization. Their synthesis generally leads to mixtures of their rac and meso isomers, whose separation is often problematic. In this contribution, we report on the synthesis of a novel silyl-bridged bis(indenyl)-based metallocene, and on the separation of its rac and meso isomers by simple recrystallization from toluene. The two complexes, activated by methylaluminoxane (MAO), have been used as precatalysts in ethylene/1-hexene copolymerization. Regardless of the reaction conditions, the meso complex outperformed its rac congener. A similar trend was observed by performing the process in the presence of the silica-supported versions of the complexes. This is remarkable, since meso metallocenes generally display lower activities than their rac analogues. Furthermore, the meso isomer generates polymer products that are more in line with the targets for the preparation of a bimodal PE grade made of a lower-MW high-density (HDPE) fraction and a higher-MW linear low-density (LLDPE) fraction.

Tacticity Control of Cyclic Poly(3-Thiobutyrate) Prepared by Ring-Opening Polymerization of Racemic ß-Thiobutyrolactone.

We report here on the ring-opening polymerization (ROP) of racemic ß-thiobutyrolactone (rac-TBL), as the first chemical synthesis of poly(3-thiobutyrolactone) (P3TB), the thioester analogue of the ubiquitous poly(3-hydroxybutyrate) (P3HB). The ROP reactions proceed very fast (TOF >12 000 h-1 at r.t.) in the presence of various metal-based catalysts. Remarkably, catalyst systems based on non-chiral yttrium complexes stabilized by tetradentate amino alkoxy- or diamino-bis(phenolate) ligands {ONXOR1,R2 }2- (X=O, N) provide access to cyclic P3TB with either high isoselectivity (Pm up to 0.90) or high syndiotactic bias (Pr up to 0.70). The stereoselectivity can be controlled by manipulation of the substituents on the ligand platform and adequate choice of the reaction solvent and temperature as well. The cyclic polymer topology is evidenced by MALDI-ToF MS, NMR and TGA. Highly isotactic cyclic P3TB is a semi-crystalline material as revealed by DSC.

Bonding analysis in ytterbium(II) distannyl and related tetryls.

The syntheses of the ytterbium(II) distannyl [Yb{Sn(SiMe3)3}2·(thf)4] (Yb-Sn) and of its digermyl analogue [Yb{Ge(SiMe3)3}2·(thf)3] (Yb-Ge) are presented. The compounds were characterised by multinuclear high-resolution solution NMR spectroscopy, including 171Yb NMR, and by X-ray diffraction crystallography. The bonding and electronic properties of the two complexes, along with those of the known ytterbium(II) disilyl derivative [Yb{Si(SiMe3)3}2·(thf)3] (Yb-Si) and those of the congeneric calcium distannyl [Ca{Sn(SiMe3)3}2·(thf)4] (Ca-Sn), were investigated in detail by DFT calculations. This analysis points at a primarily ionic Yb-tetrel bonding, with a small covalent contribution, attributed principally to the 5d(Yb) participation. This weak covalent character is found to be larger for the distannyl Yb-Sn than for its lighter Si- and Ge-derivatives. The covalent component is also found to be greater in Yb-Sn than in Ca-Sn, due to the availability of the 5d(Yb) orbitals for bonding.

Bonding in Barium Boryloxides, Siloxides, Phenoxides and Silazides: A Comparison with the Lighter Alkaline Earths.

Barium complexes ligated by bulky boryloxides [OBR2 ]- (where R=CH(SiMe3 )2 , 2,4,6-i Pr3 -C6 H2 or 2,4,6-(CF3 )3 -C6 H2 ), siloxide [OSi(SiMe3 )3 ]- , and/or phenoxide [O-2,6-Ph2 -C6 H3 ]- , have been prepared. A diversity of coordination patterns is observed in the solid state for both homoleptic and heteroleptic complexes, with coordination numbers ranging between 2 and 4. The identity of the bridging ligand in heteroleptic dimers [Ba(µ2 -X1 )(X2 )]2 depends largely on the given pair of ligands X1 and X2 . Experimentally, the propensity to fill the bridging position increases according to [OB{CH(SiMe3 )2 }2 )]- <[N(SiMe3 )2 ]- <[OSi(SiMe3 )3 ]- <[O(2,6-Ph2 -C6 H3 )]- <[OB(2,4,6-i Pr3 -C6 H2 )2 ]- . This trend is the overall expression of 3 properties: steric constraints, electronic density and σ- and π-donating capability of the negatively charged atom, and ability to generate Ba ⋅ ⋅ ⋅ F, Ba ⋅ ⋅ ⋅ C(π) or Ba ⋅ ⋅ ⋅ H-C secondary interactions. The comparison of the structural motifs in the complexes [Ae{µ2 -N(SiMe3 )2 }(OB{CH(SiMe3 )2 }2 )]2 (Ae = Mg, Ca, Sr and Ba) suggest that these observations may be extended to all alkaline earths. DFT calculations highlight the largely prevailing ionic character of ligand-Ae bonding in all compounds. The ionic character of the Ae-ligand bond encourages bridging coordination, whereas the number of bridging ligands is controlled by steric factors. DFT computations also indicate that in [Ba(µ2 -X1 )(X2 )]2 heteroleptic dimers, ligand predilection for bridging vs. terminal positions is dictated by the ability to establish secondary interactions between the metals and the ligands.

Metal-metal bonded alkaline-earth distannyls.

The first families of alkaline-earth stannylides [Ae(SnPh3)2·(thf) x ] (Ae = Ca, x = 3, 1; Sr, x = 3, 2; Ba, x = 4, 3) and [Ae{Sn(SiMe3)3}2·(thf) x ] (Ae = Ca, x = 4, 4; Sr, x = 4, 5; Ba, x = 4, 6), where Ae is a large alkaline earth with direct Ae-Sn bonds, are presented. All complexes have been characterised by high-resolution solution NMR spectroscopy, including 119Sn NMR, and by X-ray diffraction crystallography. The molecular structures of [Ca(SnPh3)2·(thf)4] (1'), [Sr(SnPh3)2·(thf)4] (2'), [Ba(SnPh3)2·(thf)5] (3'), 4, 5 and [Ba{Sn(SiMe3)3}2·(thf)5] (6'), most of which crystallised as higher thf solvates than their parents 1-6, were established by XRD analysis; the experimentally determined Sn-Ae-Sn' angles lie in the range 158.10(3)-179.33(4)°. In a given series, the 119Sn NMR chemical shifts are slightly deshielded upon descending group 2 from Ca to Ba, while the silyl-substituted stannyls are much more shielded than the phenyl ones (δ 119Sn/ppm: 1', -133.4; 2', -123.6; 3', -95.5; 4, -856.8; 5, -848.2; 6', -792.7). The bonding and electronic properties of these complexes were also analysed by DFT calculations. The combined spectroscopic, crystallographic and computational analysis of these complexes provide some insight into the main features of these unique families of homoleptic complexes. A comprehensive DFT study (Wiberg bond index, QTAIM and energy decomposition analysis) points at a primarily ionic Ae-Sn bonding, with a small covalent contribution, in these series of complexes; the Sn-Ae-Sn' angle is associated with a flat energy potential surface around its minimum, consistent with the broad range of values determined by experimental and computational methods.

Bis(imino)carbazolate lead(II) fluoride and related halides.

The versatility of a bulky bis(imino)carbazolate ligand in lead(ii) chemistry is illustrated by the synthesis of a soluble, heteroleptic lead(ii) fluoride and several halide (Cl, Br and I), amide and hydrocarbyl congeners. All complexes have been structurally authenticated, and a full set of 207Pb NMR data is discussed.

Modular Synthesis of 9,10-Dihydroacridines through an ortho-C Alkenylation/Hydroarylation Sequence between Anilines and Aryl Alkynes in Hexafluoroisopropanol.

9,10-Dihydroacridines are frequently encountered as key scaffolds in OLEDs. However, accessing those compounds from feedstock precursors typically requires multiple steps. Herein, a modular one-pot synthesis of 9,10-dihydroacridine frameworks is achieved through a reaction sequence featuring a selective ortho-C alkenylation of diarylamines with aryl alkynes followed by an intramolecular hydroarylation of the olefin formed as an intermediate. This transformation was accomplished by virtue of the combination of hexafluoroisopropanol and triflimide as a catalyst that triggers the whole process.

{Cyclopentadienyl/Fluorenyl}-Group 4 ansa-Metallocene Catalysts for Production of Tailor-Made Polyolefins.

The development of new metallocene-based polymerization catalysts and innovative processes derived thereof still constitutes a challenge for the manufacturing of polyolefinic materials with tailored properties (e. g. particular microstructure or topology, ultra-high molecular weight, high melting transition, and their combinations) for contemporary commercial applications. This personal account summarizes our continuing endeavors to advance the family of industry-relevant stereoselective propylene polymerization catalysts based on C1 -symmetric group 4 ansa-metallocenes incorporating multi-substituted fluorenyl-cyclopentadienyl {Cp/Flu} ligands. Within the framework of this project, valuable structural and catalytic data, harvested both for neutral metallocenes and for metallocenium ion-pairs, have been used for rational design of more efficient catalytic systems, reluctant towards side reactions, and for providing new stereoregular value-added polymer materials.

Ruthenium-Catalyzed Coupling Reactions of CO2 with C2 H4 and Hydrosilanes towards Silyl Esters.

A series of in situ-prepared catalytic systems incorporating RuII precursors and bidentate phosphine ligands has been probed in the reductive carboxylation of ethylene in the presence of triethylsilane as reductant. The catalytic production of propionate and acrylate silyl esters was evidenced by high-throughput screening (HTS) and implemented in batch reactor techniques. The most promising catalyst systems identified were made of Ru(H)(Cl)(CO)(PPh3 )3 and 1,4-bis(dicyclohexylphosphino)butane (DCPB) or 1,1'-ferrocene-diyl-bis(cyclohexylphosphine) (DCPF). A marked influence of water on the acrylate/propionate selectivity was noted. Turnover numbers [mol mol(Ru)-1 ] up to 16 for acrylate and up to 68 for propionate were reached under relatively mild conditions (20 bar, 100 °C, 0.5 mol % Ru, 40 mol % H2 O vs. HSiEt3 ). Possible mechanisms are discussed.

Alkaline-earth complexes with macrocyclic-functionalised bis(phenolate)s and bis(fluoroalkoxide)s.

The synthesis and structural features of several families of unsolvated molecular complexes of the heavy alkaline earths (Ae = calcium, strontium and barium) supported by bis(phenolate)s or bis(fluoroalkoxide)s are described. These dianionic, multidentate ligands are built around diaza-macrocycles that contain either five or six N- and O-heteroatoms. Several of these complexes have been characterised by X-ray diffraction crystallography. A list of comparative features was drawn upon close examination of the molecular structures of these complexes. It highlights the subtle influences of the identity of the central Ae metal, denticity and nature -fluoroalkoxide vs. phenolate- of the anionic tethers in the ligands. All complexes are seven- or eight-coordinate. It is observed in particular that a decrease of the number of heteroatoms in the macrocyclic backbone of the ligand will be compensated by the establishment of intramolecular AeF interactions (accounting for ca. 3.8-6.4% of the pertaining coordination spheres according to bond valence sum analysis), dimerisation of the complex, or, in one case, solvent (thf) retention. Attempts to gauge the Lewis acidity in these series of complexes were carried out by three independent methods (Childs, Gutmann-Beckett and global electrophilicity index). However, conflicting results were obtained and no clear trend can be delineated, even if on the whole, these measurements concur to suggest relatively low Lewis acidity.

A versatile nitrogen ligand for alkaline-earth chemistry.

The tridentate ligand 1,8-bis-(2,6-diisopropylphenyl)imino-3,6-di-tert-butyl-carbazolate, {CarbDiPP}-, has been used to prepare a variety of complexes of the large alkaline earths (Ae) calcium, strontium and barium. A complex of their smaller congener, magnesium, has also been synthesised. The range of coligands that have been utilised include alkyls, amides, halides and tetrelides. All structurally characterised complexes presented herein are stable in solution and do not undergo ligand redistribution that is otherwise well-known to pollute the chemistry of the alkaline-earth metals. Detailed structural and spectroscopic data for these compounds are discussed. They provide compelling evidence that this nitrogen ligand allows for the kinetic stabilisation of Ae complexes through optimal steric encapsulation of the voluminous metal centres. Its ease of access combined to its evident versatility make {CarbDiPP}H stand out in the portfolio of proligands that have been devised for similar purposes in the past decade. Yet, it fell short in our attempts to synthesise heteroleptic Ae-hydrides upon action of PhSiH3 onto Ae-amides, as the crystallised products showed the imine groups were prone to hydride reduction and formal hydrosilylation.

Bis(imino)carbazolate: A Master Key for Barium Chemistry.

Reported here is a readily available bis(imino)carbazole-based proligand that constitutes a convenient entry point into the challenging synthetic molecular chemistry of barium. It enables the preparation of rare or even, up to now, unknown, solution-stable heteroleptic barium complexes. The syntheses and structural features for the first molecular barium fluoride and the first barium stannylide, with an unsupported Ba-Sn bond, are described, along with other carbazolate barium species: an amide (both a remarkably stable starting material and an excellent hydrophosphination precatalyst), iodide, and silanylide. DFT analysis of bonding patterns in the barium stannylide and barium silanylide highlights a prevailingly ionic barium-tetrelide bond with a small covalent contribution.

Barium-Catalysed Dehydrocoupling of Hydrosilanes and Borinic Acids: A Mechanistic Insight.

Invited for the cover of this issue are the groups of Yann Sarazin at the University of Rennes and Laura Falivene at the King Abdullah University of Science and Technology. The image depicts two barium figures working in tandem to mimic the dinuclear nature of the active species in the catalytic cycle described in the manuscript. Read the full text of the article at 10.1002/chem.201904933.

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control.

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico-chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) ß- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.

Paraffin-Inert Atmospheric Solid Analysis Probe: A Fast and Easy Approach To Characterize Extremely Air-Sensitive Organometallic Complexes by Mass Spectrometry.

Rational characterization of most organometallic compounds is hampered by their high reactivity, in particular, toward oxygen and water. Mass spectrometry experiments require physical introduction of the sample in the ionization source. So, the main challenge is to transfer air-sensitive organometallic compounds from inert atmosphere to the ionization source. In this aim, we have developed an easy technique that allows the analysis of air-sensitive compounds using the atmospheric solid analysis probe (ASAP). This method consists of a glass capillary filled with the sample (solid or liquid) and sealed by a paraffin plug to maintain the inert sample until the ionization process. It is illustrated through the structural characterization of a new highly air-sensitive dinuclear zirconium complex supported by an original switchable stilbene platform.

Barium-Catalysed Dehydrocoupling of Hydrosilanes and Borinic Acids: A Mechanistic Insight.

Two very rare cases of barium boryloxides, the homoleptic [Ba(OB{CH(SiMe3 )2 }2 )2 ⋅C7 H8 ] and the heteroleptic [{LONO4 }BaOB{CH(SiMe3 )2 }2 ] stabilised by the multidentate aminoetherphenolate {LONO4 }- , are presented, and their structural properties are discussed. The electron-deficient [Ba(OB{CH(SiMe3 )2 }2 )2 ⋅C7 H8 ] shows, in particular, resilient η6 -coordination of the toluene molecule. Together with its amido parents [Ba{N(SiMe3 )2 }2 ⋅thf2 ] and [Ba{N(SiMe3 )2 }2 ]2 , this complex catalyses the fast and chemoselective dehydrocoupling of borinic acids R2 BOH and hydrosilanes HSiR'3 , yielding borasiloxanes R2 BOSiR'3 in a controlled fashion. The assessment of substrate scope indicates that, for now, the reaction is limited to bulky borinic acids. Kinetic analysis shows that the rate-limiting step of the catalytic manifold traverses a dinuclear transition state. A detailed mechanistic scenario is proposed on the basis of DFT computations, the results of which are fully consistent with experimental data. It consists of a stepwise process with rate-determining nucleophilic attack of a metal-bound O-atom onto the incoming hydrosilane, involving throughout dinuclear catalytically active species.