MYB61 is required for mucilage deposition and extrusion in the Arabidopsis seed coat.

We have undertaken a systematic reverse genetic approach to understand R2R3-MYB gene function in Arabidopsis. Here, we report the functional characterization of MYB61 based on the phenotype of three independent insertion alleles. Wide-ranging phenotype screens indicated that MYB61 mutants were deficient in seed mucilage extrusion upon imbibition. This phenotype was expressed in the sporophytic tissues of the seed. Deposition and extrusion of the principal component of the mucilage, a relatively unbranched rhamnogalacturonan, were reduced in the MYB61 mutant seed coats. Additional defects in the maturation of the testa epidermal cells suggested a potential deficiency in extracellular secretion in myb61 lines. Consistent with a proposed role in testa development, reverse transcription-polymerase chain reaction analysis showed the highest MYB61 expression in siliques, which was localized to the seed coat by a beta-glucuronidase (GUS) reporter gene fusion. Lower levels of GUS expression were detected in developing vascular tissue. Parallel analysis of the ttg1-1 mutant phenotype indicated that this mutant showed more severe developmental defects than myb61 and suggested that MYB61 may function in a genetic pathway distinct from that of TTG1. The transient nature of seed epidermal characteristics in the ttg1-1 mutant suggested that TTG1 was required for maintenance rather than initiation of testa epidermal differentiation. Germination and seedling establishment were compromised in the myb61 and ttg1-1 mutants under conditions of reduced water potential, suggesting a function for Arabidopsis seed mucilage during germination in dry conditions.

Cell wall architecture of the elongating maize coleoptile.

The primary walls of grasses are composed of cellulose microfibrils, glucuronoarabinoxylans (GAXs), and mixed-linkage beta-glucans, together with smaller amounts of xyloglucans, glucomannans, pectins, and a network of polyphenolic substances. Chemical imaging by Fourier transform infrared microspectroscopy revealed large differences in the distributions of many chemical species between different tissues of the maize (Zea mays) coleoptile. This was confirmed by chemical analyses of isolated outer epidermal tissues compared with mesophyll-enriched preparations. Glucomannans and esterified uronic acids were more abundant in the epidermis, whereas beta-glucans were more abundant in the mesophyll cells. The localization of beta-glucan was confirmed by immunocytochemistry in the electron microscope and quantitative biochemical assays. We used field emission scanning electron microscopy, infrared microspectroscopy, and biochemical characterization of sequentially extracted polymers to further characterize the cell wall architecture of the epidermis. Oxidation of the phenolic network followed by dilute NaOH extraction widened the pores of the wall substantially and permitted observation by scanning electron microscopy of up to six distinct microfibrillar lamellae. Sequential chemical extraction of specific polysaccharides together with enzymic digestion of beta-glucans allowed us to distinguish two distinct domains in the grass primary wall. First, a beta-glucan-enriched domain, coextensive with GAXs of low degrees of arabinosyl substitution and glucomannans, is tightly associated around microfibrils. Second, a GAX that is more highly substituted with arabinosyl residues and additional glucomannan provides an interstitial domain that interconnects the beta-glucan-coated microfibrils. Implications for current models that attempt to explain the biochemical and biophysical mechanism of wall loosening during cell growth are discussed.

Beta-D-glycan synthases and the CesA gene family: lessons to be learned from the mixed-linkage (1-->3),(1-->4)beta-D-glucan synthase.

Cellulose synthase genes (CesAs) encode a broad range of processive glycosyltransferases that synthesize (1-->4)beta-D-glycosyl units. The proteins predicted to be encoded by these genes contain up to eight membrane-spanning domains and four 'U-motifs' with conserved aspartate residues and a QxxRW motif that are essential for substrate binding and catalysis. In higher plants, the domain structure includes two plant-specific regions, one that is relatively conserved and a second, so-called 'hypervariable region' (HVR). Analysis of the phylogenetic relationships among members of the CesA multi-gene families from two grass species, Oryza sativa and Zea mays, with Arabidopsis thaliana and other dicotyledonous species reveals that the CesA genes cluster into several distinct sub-classes. Whereas some sub-classes are populated by CesAs from all species, two sub-classes are populated solely by CesAs from grass species. The sub-class identity is primarily defined by the HVR, and the sequence in this region does not vary substantially among members of the same sub-class. Hence, we suggest that the region is more aptly termed a 'class-specific region' (CSR). Several motifs containing cysteine, basic, acidic and aromatic residues indicate that the CSR may function in substrate binding specificity and catalysis. Similar motifs are conserved in bacterial cellulose synthases, the Dictyostelium discoideum cellulose synthase, and other processive glycosyltransferases involved in the synthesis of non-cellulosic polymers with (1-->4)beta-linked backbones, including chitin, heparan, and hyaluronan. These analyses re-open the question whether all the CesA genes encode cellulose synthases or whether some of the sub-class members may encode other non-cellulosic (1-->4)beta-glycan synthases in plants. For example, the mixed-linkage (1-->3)(1-->4)beta-D-glucan synthase is found specifically in grasses and possesses many features more similar to those of cellulose synthase than to those of other beta-linked cross-linking glycans. In this respect, the enzymatic properties of the mixed-linkage beta-glucan synthases not only provide special insight into the mechanisms of (1-->4)beta-glycan synthesis but may also uncover the genes that encode the synthases themselves.

Insight into multi-site mechanisms of glycosyl transfer in (1-->4)beta-D-glycans provided by the cereal mixed-linkage (1-->3),(1-->4)beta-D-glucan synthase.

Synthases of cellulose, chitin, hyaluronan, and all other polymers containing (1-->4)beta-linked glucosyl, mannosyl and xylosyl units have overcome a substrate orientation problem in catalysis because the (1-->4)beta-linkage requires that each of these sugar units be inverted nearly 180 degrees with respect to its neighbors. We and others have proposed that this problem is solved by two modes of glycosyl transfer within a single catalytic subunit to generate disaccharide units, which, when linked processively, maintain the proper orientation without rotation or re-orientation of the synthetic machinery in 3-dimensional space. A variant of the strict (1-->4)beta-D-linkage structure is the mixed-linkage (1-->3),(1-->4)beta-D-glucan, a growth-specific cell wall polysaccharide found in grasses and cereals. beta-Glucan is composed primarily of cellotriosyl and cellotetraosyl units linked by single (1-->3)beta-D-linkages. In reactions in vitro at high substrate concentration, a polymer composed of almost entirely cellotriosyl and cellopentosyl units is made. These results support a model in which three modes of glycosyl transfer occur within the synthase complex instead of just two. The generation of odd numbered units demands that they are connected by (1-->3)beta-linkages and not (1-->4)beta-. In this short review of beta-glucan synthesis in maize, we show how such a model not only provides simple mechanisms of synthesis for all (1-->4)beta-D-glycans but also explains how the synthesis of callose, or strictly (1-->3)beta-D-glucans, occurs upon loss of the multiple modes of glycosyl transfer to a single one.

Approaches to understanding the functional architecture of the plant cell wall.

Cell wall polysaccharides are some of the most complex biopolymers known, and yet their functions remain largely mysterious. Advances in imaging methods permit direct visualisation of the molecular architecture of cell walls and the modifications that occur to polymers during growth and development. To address the structural and functional relationships of individual cell wall components, we need to better characterise a broad range of structural and architectural alterations in cell walls, appearing as a consequence of developmental regulation, environmental adaptation or genetic modification. We have developed a rapid method to screen large numbers of plants for a broad range of cell wall phenotypes using Fourier transform infrared microspectroscopy and Principal Component Analysis. We are using model systems to uncover the genes that encode some of the cell-wall-related biosynthetic and hydrolytic enzymes, and structural proteins.

COBRA encodes a putative GPI-anchored protein, which is polarly localized and necessary for oriented cell expansion in Arabidopsis.

To control organ shape, plant cells expand differentially. The organization of the cellulose microfibrils in the cell wall is a key determinant of differential expansion. Mutations in the COBRA (COB) gene of Arabidopsis, known to affect the orientation of cell expansion in the root, are reported here to reduce the amount of crystalline cellulose in cell walls in the root growth zone. The COB gene, identified by map-based cloning, contains a sequence motif found in proteins that are anchored to the extracellular surface of the plasma membrane through a glycosylphosphatidylinositol (GPI) linkage. In animal cells, this lipid linkage is known to confer polar localization to proteins. The COB protein was detected predominately on the longitudinal sides of root cells in the zone of rapid elongation. Moreover, COB RNA levels are dramatically upregulated in cells entering the zone of rapid elongation. Based on these results, models are proposed for the role of COB as a regulator of oriented cell expansion.

Cell wall and membrane-associated exo-beta-D-glucanases from developing maize seedlings.

A beta-D-glucan exohydrolase was purified from the cell walls of developing maize (Zea mays L.) shoots. The cell wall enzyme preferentially hydrolyzes the non-reducing terminal glucosyl residue from (1-->3)-beta-D-glucans, but also hydrolyzes (1-->2)-, (1-->6)-, and (1-->4)-beta-D-glucosyl units in decreasing order of activity. Polyclonal antisera raised against the purified exo-beta-D-glucanase (ExGase) were used to select partial-length cDNA clones, and the complete sequence of 622 amino acid residues was deduced from the nucleotide sequences of the cDNA and a full-length genomic clone. Northern gel-blot analysis revealed what appeared to be a single transcript, but three distinct polypeptides were detected in immunogel-blot analyses of the ExGases extracted from growing coleoptiles. Two polypeptides appear in the cell wall, where one polypeptide is constitutive, and the second appears at the time of the maximum rate of elongation and reaches peak activity after elongation has ceased. The appearance of the second polypeptide coincides with the disappearance of the mixed-linkage (1-->3), (1-->4)-beta-D-glucan, whose accumulation is associated with cell elongation in grasses. The third polypeptide of the ExGase is an extrinsic protein associated with the exterior surface of the plasma membrane. Although the activity of the membrane-associated ExGase is highest against (1-->3)-beta-D-glucans, the activity against (1-->4)-beta-D-glucan linkages is severely attenuated and, therefore, the enzyme is unlikely to be involved with turnover of the (1-->3), (1-->4)-beta-D-glucan. We propose three potential functions for this novel ExGase at the membrane-wall interface.

A rapid method to screen for cell-wall mutants using discriminant analysis of Fourier transform infrared spectra.

We have developed a rapid method to screen large numbers of mutant plants for a broad range of cell wall phenotypes using Fourier transform infrared (FTIR) microspectroscopy of leaves. We established and validated a model that can discriminate between the leaves of wild-type and a previously defined set of cell-wall mutants of Arabidopsis. Exploratory principal component analysis indicated that mutants deficient in different cell-wall sugars can be distinguished from each other. Discrimination of cell-wall mutants from wild-type was independent of variability in starch content or additional unrelated mutations that might be present in a heavily mutagenised population. We then developed an analysis of FTIR spectra of leaves obtained from over 1000 mutagenised flax plants, and selected 59 plants whose spectral variation from wild-type was significantly out of the range of a wild-type population, determined by Mahalanobis distance. Cell wall sugars from the leaves of selected putative mutants were assayed by gas chromatography-mass spectrometry and 42 showed significant differences in neutral sugar composition. The FTIR spectra indicated that six of the remaining 17 plants have altered ester or protein content. We conclude that linear discriminant analysis of FTIR spectra is a robust method to identify a broad range of structural and architectural alterations in cell walls, appearing as a consequence of developmental regulation, environmental adaptation or genetic modification.

Plant cell walls as targets for biotechnology.

Plants are the sources of major food, feed, and fiber products that are used globally. This past year has seen advances in our understanding of the enzymes that modify wall architecture, the cloning of the first cellulose synthase gene, and revisions to the lignin biosynthetic pathway. These discoveries have facilitated the development of new strategies to alter cell wall properties in transgenic plants.

Turnover of Galactans and Other Cell Wall Polysaccharides during Development of Flax Plants.

We investigated the synthesis and turnover of cell wall polysaccharides of the flax (Linum usitatissimum L.) plant during development of the phloem fibers. One-month-old flax plants were exposed to a 40-min pulse with 14CO2 followed by 8-h, 24-h, and 1-month periods of chase with ambient CO2, and radioactivity in cell wall sugars was determined in various plant parts. The relative radioactivity of glucose in noncellulosic polysaccharides was the highest compared with all other cell wall sugars immediately after the pulse and decreased substantially during the subsequent chase. The relative radioactivities of the other cell wall sugars changed with differing rates, indicating turnover of specific polysaccharides. Notably, after 1 month of chase there was a marked decrease in the proportional mass and total radioactivity in cell wall galactose, indicating a long-term turnover of the galactans enriched in the fiber-containing tissues. The ratio of radiolabeled xylose to arabinose also increased during the chase, indicating a turnover of arabinose-containing polymers and interconversion to xylose. The pattern of label redistribution differed between organs, indicating that the cell wall turnover processes are tissue- and cell-specific.

Cell-Wall Polysaccharides of Developing Flax Plants.

Flax (Linum usitatissimum L.) fibers originate from procambial cells of the protophloem and develop in cortical bundles that encircle the vascular cylinder. We determined the polysaccharide composition of the cell walls from various organs of the developing flax plant, from fiber-rich strips peeled from the stem, and from the xylem. Ammonium oxalate-soluble polysaccharides from all tissues contained 5-linked arabinans with low degrees of branching, rhamnogalacturonans, and polygalacturonic acid. The fiber-rich peels contained, in addition, substantial amounts of a buffer-soluble, 4-linked galactan branched at the 0-2 and 0-3 positions with nonreducing terminal-galactosyl units. The cross-linking glycans from all tissues were (fucogalacto)xyloglucan, typical of type-I cell walls, xylans containing (1->)-[beta]-D-xylosyl units branched exclusively at the xylosyl O-2 with t-(4-O-methyl)-glucosyluronic acid units, and (galacto)glucomannans. Tissues containing predominantly primary cell wall contained a larger proportion of xyloglucan. The xylem cells were composed of about 60% 4-xylans, 32% cellulose, and small amounts of pectin and the other cross-linking polysaccharides. The noncellulosic polysaccharides of flax exhibit an uncommonly low degree of branching compared to similar polysaccharides from other flowering plants. Although the relative abundance of the various noncellulosic polysaccharides varies widely among the different cell types, the linkage structure and degree of branching of several of the noncellulosic polysaccharides are invariant.

Biosynthesis of plant cell wall polysaccharides.

The cell wall is the principal structural element of plant form. Cellulose, long crystals of several dozen glucan chains, forms the microfibrillar foundation of plant cell walls and is synthesized at the plasma membrane. Except for callose, all other noncellulosic components are secreted to the cell surface and form a porous matrix assembled around the cellulose microfibrils. These diverse noncellulosic polysaccharides and proteins are made in the endomembrane system. Many questions about the biosynthesis and modification within the Golgi apparatus and integration of cell components at the cell surface remain unanswered. The lability of synthetic complexes upon isolation is one reason for slow progress. However, with new methods of membrane isolation and analysis of products in vitro, recent advances have been made in purifying active synthases from plasma membrane and Golgi apparatus. Likely synthase polypeptides have been identified by affinity-labeling techniques, but we are just beginning to understand the unique features of the coordinated assembly of complex polysaccharides. Nevertheless, such progress renews hope that the first gene of a synthase for a wall polysaccharide from higher plants is within our grasp.

The plant cytoskeleton-cell-wall continuum.

Two of the most challenging mysteries of morphogenesis are how cells receive positional information from neighbouring cells and how receipt of this information triggers events that initiate cell differentiation. The concept that the cytoskeleton and éxocellular matrix' (ECM) form an interactive scaffold for perception and transduction of positional information is relatively new. Research is beginning to indicate that a continuous cytoskeleton-ECM scaffold may be a feature of all eukaryotic cells and that many of the molecules participating in this structure may be shared by plants, fungi and animals.

Synthesis of (1-->3), (1-->4)-beta-D-glucan in the Golgi apparatus of maize coleoptiles.

Membranes of the Golgi apparatus from maize (Zea mays L.) were used to synthesize in vitro the (1-->3), (1-->4)-beta-D-glucan (MG) that is unique to the cell wall of the Poaceae. The MG was about 250 kDa and was separated from a much larger (1-->3)-beta-D-glucan (callose) by gel-permeation chromatography. Diagnostic oligosaccharides, released by a sequence-dependent endoglucanase from Bacillus subtilis, were separated by HPLC and GLC. The trisaccharide beta-D-Glcp-(1-->4)-beta-D-Glcp-(1-->3)-D-Glc, the tetrasaccharide [beta-D-Glcp-(1-->4)]2-beta-D-Glcp-(1-->3)-D-Glc, and longer cellodextrin-(1-->3)-D-Glc oligosaccharides were synthesized in proportions similar to those found in purified MG. Activated charcoal added during homogenization enhanced synthesis of MG, presumably by removing inhibitory compounds. The Golgi apparatus was determined as the site of synthesis by a combination of downward and flotation centrifugations on sucrose step gradients. The rate of synthesis did not reach saturation at up to 10 mM UDP-Glc. Chelators completely abolished synthesis, but synthase activity was restored by addition of either MgCl2 or, to a lesser extent, MnCl2. Synthesis continued for well over 1 h; addition of KOH to raise the pH from 7.2 to 8.0 during the reaction increased the rate of synthesis, which indicates that a transmembrane pH gradient may facilitate synthesis of MG.

Structural models of primary cell walls in flowering plants: consistency of molecular structure with the physical properties of the walls during growth.

Advances in determination of polymer structure and in preservation of structure for electron microscopy provide the best view to date of how polysaccharides and structural proteins are organized into plant cell walls. The walls that form and partition dividing cells are modified chemically and structurally from the walls expanding to provide a cell with its functional form. In grasses, the chemical structure of the wall differs from that of all other flowering plant species that have been examined. Nevertheless, both types of wall must conform to the same physical laws. Cell expansion occurs via strictly regulated reorientation of each of the wall's components that first permits the wall to stretch in specific directions and then lock into final shape. This review integrates information on the chemical structure of individual polymers with data obtained from new techniques used to probe the arrangement of the polymers within the walls of individual cells. We provide structural models of two distinct types of walls in flowering plants consistent with the physical properties of the wall and its components.