Analysis of chemical warfare agents III. Use of bis-nucleophiles in the trace level determination of phosgene and perfluoroisobutylene.

The reactivity of phosgene and perfluoroisobutylene (PFIB) towards 1,2-bis-nucleophiles was exploited to allow determination of these gases in air samples. 2-Aminothiophenol (ATP), 3,4-dimercaptotoluene (DMT) and 2-hydroxymethylpiperidine (HMP) were evaluated as bis-nucleophiles capable of forming thermally-stable derivatives with phosgene and PFIB when loaded with triethylamine onto Tenax TA. Experimental design was used to optimise thermal desorption conditions. Detection limits in the low ngm(-3) range were observed for the five derivatives investigated. This work represents the most sensitive analytical method for trace level quantitation of phosgene and PFIB published to date.

Analysis of chemical warfare agents. II. Use of thiols and statistical experimental design for the trace level determination of vesicant compounds in air samples.

Thermal desorption with gas chromatography-mass spectrometry (TD-GC-MS) remains the technique of choice for analysis of trace concentrations of analytes in air samples. This paper describes the development and application of a method for analysing the vesicant compounds sulfur mustard and Lewisites I-III. 3,4-Dimercaptotoluene and butanethiol were used to spike sorbent tubes and vesicant vapours sampled; Lewisite I and II reacted with the thiols while sulfur mustard and Lewisite III did not. Statistical experimental design was used to optimise thermal desorption parameters and the optimum method used to determine vesicant compounds in headspace samples taken from a decontamination trial. 3,4-Dimercaptotoluene reacted with Lewisites I and II to give a common derivative with a limit of detection (LOD) of 260 microg m(-3), while the butanethiol gave distinct derivatives with limits of detection around 30 microg m(-3).

Application of central composite design in the optimisation of thermal desorption parameters for the trace level determination of the chemical warfare agent chloropicrin.

A quantitative trace-level thermal desorption gas chromatography mass spectrometry method was developed for chloropicrin CCl3NO2 using central composite design. Factors influencing the thermal decomposition were elucidated and optimum conditions for maximum response deduced. Four factors were investigated: desorption time, desorption temperature, valve temperature and line temperature. Only valve and line temperature influenced the response. The storage stability of chloropicrin on Tenax TA was investigated. Only the storage conditions affected recovery: no significant loss of chloropicrin was observed for spiked tubes stored in a refrigerator for up to 30 days. The application of central composite design to study thermal degradation of chloropicrin has not been described in the literature. The benefits in adopting this approach are reflected in the limit of detection, 22 ng on the sorbent tube (equivalent to 3.2 ppbv), the lowest atmospheric detection limit reported to date.