ABSTRACT
The proliferation of 3D printing MakerSpaces in university settings has led to an increased risk of student and technician exposure to ultrafine particles. New MakerSpaces do not have standardized specifications to aid in the design of the space; therefore, a need exists to characterize the impacts of different engineering controls on MakerSpace air quality. This study compares three university MakerSpaces: a library MakerSpace operating ≤4 devices under typical office space ventilation with no engineering controls, a laboratory MakerSpace operating 29 printers inside grated cabinets, with laboratory-grade ventilation, and a center MakerSpace operating ≤4 devices with neither engineering controls nor internal ventilation. All MakerSpaces were studied under both controlled (using a standard print design) and uncontrolled (real-time user operation) conditions measuring emitted particle concentrations in the near-field. Additionally, volatile organic emissions and the difference between near-field and far-field particle concentrations were investigated in multiple MakerSpaces. The center MakerSpace had the greatest net increase in mean particle number concentration (+1378.9% relative to background during a print campaign using polylactic acid (PLA) filament in a MakerBot (MakerBot-PLA)). The number-weighted mean diameter had the greatest change relative to background during the library campaign, +37.1% for the Lulzbot-PLA and -56.1% for the Ultimaker-PLA studies. For the standard NIST design with MakerBot-PLA, the laboratory's particle removal ratio was 30 times greater than in the library with open cabinets and 54 times greater when the cabinet doors were closed. The average particle removal rate from the center MakerSpace was up to 2.5 times less efficient than that of the library for the same MakerBot-PLA combination. These results suggest ventilation as a key priority in the design of a new university MakerSpace.
ABSTRACT
In this study, we developed a microdevice concept for drug/fluidic transport taking an inspiration from supramolecular motor found in biological cells. Specifically, idealized multi-functional design geometry (nozzle/diffuser/nozzle) was developed for (i) fluidic/particle transport; (ii) particle separation; and (iii) droplet generation. Several design simulations were conducted to demonstrate the working principles of the multi-functional device. The design simulations illustrate that the proposed design concept is feasible for multi-functionality. However, further experimentation and optimization studies are needed to fully evaluate the multifunctional device concept for multiple applications.
