The Addition of Sprint Interval Training to Field Lacrosse Training Increases Rate of Torque Development and Contractile Impulse in Female High School Field Lacrosse Players.

Field lacrosse requires sudden directional changes and rapid acceleration/deceleration. The capacity to perform these skills is dependent on explosive muscle force production. Limited research exists on the potential of sprint interval training (SIT) to impact explosive muscle force production in field lacrosse players. The purpose of this study is to examine SIT, concurrent to field-lacrosse-specific training, on the rate of torque development (RTD), contractile impulse, and muscle function in female high school field lacrosse players (n = 12; 16 ± 1 yrs.). SIT was performed three times per week, concurrent to field-lacrosse-specific training, for 12 weeks. Right lower-limb muscle performance was assessed pre-, mid-, and post-SIT training via isometric and isokinetic concentric knee extensor contractions. Outcomes included RTD (Nm·s-1), contractile impulse (Nm·s), and peak torque (Nm). RTD for the first 50 ms of contraction improved by 42% by midseason and remained elevated at postseason (p = 0.004, effect size (ES) = -577.3 to 66.5). Contractile impulse demonstrated a training effect across 0-50 ms (42%, p = 0.004, ES = -1.4 to 0.4), 0-100 ms (33%, p = 0.018, ES = 3.1 to 0.9), and 0-200 ms (22%, p = 0.031, ES = -7.8 to 1.6). Isometric (0 rad·s-1) and concentric (3.1 rad·s-1) strength increased by 20% (p = 0.002, ES = -60.8 to -20.8) and 9% (p = 0.038, ES = -18.2 to 0.0) from SIT and field-lacrosse-specific training, respectively (p < 0.05). SIT, concurrent to field-lacrosse-specific training, enhanced lower-limb skeletal muscle performance, which may enable greater sport-specific gains.

Use of Gloves to Examine Intermittent Palm Cooling's Impact on Rowing Ergometry.

ABSTRACT: O'Brien, IT, Kozerski, AE, Gray, WD, Chen, L, Vargas, LJ, McEnroe, CB, Vanhoover, AC, King, KM, Pantalos, GM, and Caruso, JF. Use of gloves to examine intermittent palm cooling's impact on rowing ergometry. J Strength Cond Res 35(4): 931-940, 2021-The aim of this study was to examine the use of gloves on intermittent palm cooling's impact on rowing ergometry workouts. Our methods had subjects (n = 34) complete 3 rowing ergometer workouts of up to 8 2-minute stages separated by 45- or 60-second rests. They were randomized to one of the following treatments per workout: no palm cooling (NoPC), intermittent palm cooling as they rowed (PCex), or intermittent palm cooling as they rowed and post-exercise (PCex&post). Palm cooling entailed intermittent cold (initial temperature: 8.1° C) application and totaled 10 (PCex) and 20 (PCex&post) minutes, respectively. Workouts began with 8 minutes of rest after which pre-exercise data were obtained, followed by a ten-minute warm-up and the workout, and 20 minutes of post-exercise recovery. Numerous physiological and performance variables were collected before, during, and after workouts, and each was analyzed with either a two- or three-way analysis of variance. Our results include, with a 0.05 alpha and a simple effects post hoc, the distance rowed analysis produced a significant workout effect with PCex, PCex&post > NoPC. There were also significant interworkout differences for heart rate (HR) (NoPC > PCex) and blood lactate concentration (NoPC > PCex, PCex&post). We conclude that lower HRs and blood lactate concentrations from intermittent cooling caused subjects to experience less fatigue during those workouts and enabled more work to be performed. Continued research should identify optimal cooling characteristics to expedite body heat removal. Practical applications suggest that intermittent palm cooling administered with gloves enhance performance by abating physiological markers of fatigue.

Ergogenic and Physiological Outcomes Derived From a Novel Skin Cooling Device.

ABSTRACT: Gray, WD, Jett, DM, Cocco, AR, Vanhoover, AC, Colborn, CE, Pantalos, GM, Stumbo, J, Quesada, PM, and Caruso, JF. Ergogenic and physiological outcomes derived from a novel skin cooling device. J Strength Cond Res 35(2): 391-403, 2021-Our study's purpose assessed a cooling headband's ergogenic and physiological impacts. Subjects (15 women and 13 men) completed six visits; the final 3 entailed rowing workouts with the following treatment conditions: no head cooling (NoHC), intermittent head cooling during exercise (HCex), and intermittent head cooling during exercise and post-exercise recovery (HCex&post). Data collection occurred at the following times (a) pre-exercise and post-warm-up, (b) between stages of up to eight 2-minute bouts, and (c) at 5, 10, 15, and 20 minutes post-exercise. In addition to distance rowed, thermal, cardiovascular, perceptual, and metabolic measurements were obtained. Results included a small yet significant intertreatment difference (HCex, HCex&post > NoHC) for distance rowed. Our cardiovascular and metabolic indices exhibited sex and time differences but likely did not contribute to the ergogenic effect. Yet, left hand temperatures (LHT) exhibited significant 2-way and 3-way interactions that were the likely source of the ergogenic effect. Auditory canal temperature (AUDT) results suggest the head is sensitive to heat increases, yet LHT data show headband use evoked significantly greater temperature increases at the hand's palmar surface, indicative of heat transfer. We conclude, and our practical applications suggest, the headband's ergogenic effect was manifested by cold-induced vasodilation at the hand's palmar surface, rather than heat losses through the head.

Load-Power Relationships for High-Speed Knee Extension Exercise.

Chen, L, Davison, SW, Selimovic, EA, Mueller, RE, Beatty, SR, Carter, KA, Parmar, PJ, Symons, TB, Pantalos, GM, and Caruso, JF. Load-power relationships for high-speed knee extension exercise. J Strength Cond Res 33(6): 1480-1487, 2019-Seventy subjects did 4 knee extensor workouts with their left legs to assess load-power relationships produced on a high-speed trainer (HST; Newnan, GA, USA). Each workout is composed of 4 sets done on the HST at a different load (1, 4.4, 6.7, 9 kg). A Latin Squares Design determined load sequence per workout. Average power (AP) and peak power (PP) and those same values normalized to body mass (BM) and fat-free mass (AP/BM, PP/BM, AP/FFM, PP/FFM) were each analyzed with 2 (gender) × 4 (load) analysis of variances, with repeated measures for load. We assessed relationships between normalized loads and AP and PP values with correlation coefficients. Average power results revealed a significant interaction, with men > women at 9 kg. Peak power/body mass also yielded an interaction, with women > men at 6.7 and 9 kg. Average power/fat-free mass and PP/FFM each produced interactions, with women > men at 4.4, 6.7, and 9 kg. Correlation coefficients showed significant (r = 0.80-0.82) relationships between normalized loads and AP and PP values. In conclusion, the very low inertial resistance to initiate each repetition on this novel device may in part explain our PP/BM, AP/FFM, PP/FFM results, in which higher values were achieved by women. Our practical applications imply that the low inertial resistance for HST repetitions negates male size and strength advantages typically seen when power is measured.

Test Anxiety and Salivary Cortisol Levels in Nursing Students.

Stress, in the form of test anxiety, inhibits examination performance essential to nursing success. Salivary cortisol, a biomarker of stress, was obtained before 3 examinations and 1 nursing didactic class from a sample of baccalaureate nursing students in a midwestern US university. Significant differences were found between cortisol sampling events and by junior or senior status. These findings suggest that diverse examinations and program level yield differences in stress for students.

Salivary hormonal values from high-speed resistive exercise workouts.

Our study purpose examined salivary hormonal responses to high-speed resistive exercise. Healthy subjects (n = 45) performed 2 elbow flexor workouts on a novel (inertial kinetic exercise; Oconomowoc, WI, USA) strength training device. Our methods included saliva sample collection at both preexercise and immediately postexercise; workouts entailed two 60-second sets separated by a 90-second rest period. The samples were analyzed in duplicate for their testosterone and cortisol concentrations ([T], [C]). Average and maximum elbow flexor torque were measured from each exercise bout; they were later analyzed with a 2(gender) × 2(workout) analysis of variance (ANOVA) with repeated measures for workout. The [T] and [C] each underwent a 2(gender) × 2(time) ANOVA with repeated measures for time. A within-subject design was used to limit error variance. Average and maximum torque each had gender (men > women; p < 0.05) effects. The [T] elicited a 2-way interaction (p < 0.05), as men incurred a significant 14% increase over time, but women's values were unchanged. Yet multivariate regression revealed that 3 predictor variables (body mass and average and maximum torques) did not account for a significant amount of variance associated with the rise in male [T]. Changes in [C] were not significant. In conclusion, changes in [T] concur with the results from other studies that showed significant elevations in male [T], despite the brevity of current workouts and the rather modest volume of muscle mass engaged. Practical applications imply that salivary assays may be a viable alternative to blood draws from athletes, yet coaches and others who may administer this treatment should know that our results may have produced greater pre-post hormonal changes if postexercise sample collection had occurred at a later time point.

Net energy expenditure of gravity-independent high-speed resistive exercise done by women.

INTRODUCTION: Elevated metabolism is common to spaceflight while exercise in microgravity exacerbates energy costs. Thus in-flight exercise countermeasures must be devised that minimize energy costs as they are performed on hardware operable in microgravity. METHODS: Female subjects (N = 28), subdivided into athletic and sedentary groups, each performed two workouts on a resistive exercise device (Impulse Training Systems; Newnan, GA). Comprised exclusively of either tonic or phasic repetitions, each exercise bout entailed two 1 -min sets interspersed by a 90-s rest from which the work volume was determined. Oxygen consumption was measured before, during, and after workouts until gas uptake returned to pre-exercise levels. Net oxygen consumption was converted to net energy expenditures via indirect calorimetry. Mean net energy expenditure and work volume values were each compared with 2 (athletes, sedentaries) x 2 (tonic, phasic) ANOVAs, with repeated measures for workout. In addition, multivariate regression employed three predictor (body mass, body fat percentage, work volume) variables to account for the net energy expenditure variance. RESULTS: Workouts yielded a metabolic cost of approximately 14 kcal, yet the data produced no significant intergroup or workout differences. However, work volume analysis yielded a significant (tonic > phasic) effect. The multivariate analysis explained small yet significant amounts of net energy expenditure variance. DISCUSSION: Current results: 1) are partly attributable to higher series elastic element activity seen with Impulse repetitions; and 2) offer new information with respect to in-flight exercise protocols for female astronauts.

Front squat data reproducibility collected with a triple-axis accelerometer.

The purpose of our study was to assess data reproducibility from 2 consecutive front squat workouts, spaced 1 week apart, performed by American college football players (n = 18) as they prepared for their competitive season. For each workout, our methods entailed the performance of 3-6 front squat repetitions per set at 55, 65, and 75% of subject's 1 repetition maximum (1RM) load. In addition, a fourth set was done at a heavier load, with a resistance equal to 80 and 83% of their 1RM values, for the first and second workouts, respectively. A triple-axis accelerometer was affixed to a barbell to quantify exercise performance. Per load, the accelerometer measures peak values for the following indices: force, velocity, and power. To assess data reproducibility, inter-workout comparisons were made for 12 performance indices with 4 statistical test-retest measures: intraclass correlation coefficients, coefficients of variation (CVs), and the SEM expressed in both absolute and relative terms. Current results show that the majority of performance indices exceeded intraclass correlation (0.75-0.80) and CV (10-15%) values previously deemed as acceptable levels of data reproducibility. The 2 indices with the greatest variability were power and velocity values obtained at 55% of the 1RM load; thus, it was concluded that higher movement rates at the lightest load were the most difficult aspect of front squat performance to repeat successfully over time. Our practical applications imply lighter loads, with inherently higher rates of barbell movement, yield lower data reproducibility values.

Anthropometry as a predictor of vertical jump heights derived from an instrumented platform.

The current study purpose examined the vertical height-anthropometry relationship with jump data obtained from an instrumented platform. Our methods required college-aged (n = 177) subjects to make 3 visits to our laboratory to measure the following anthropometric variables: height, body mass, upper arm length (UAL), lower arm length, upper leg length, and lower leg length. Per jump, maximum height was measured in 3 ways: from the subjects' takeoff, hang times, and as they landed on the platform. Standard multivariate regression assessed how well anthropometry predicted the criterion variance per gender (men, women, pooled) and jump height method (takeoff, hang time, landing) combination. Z-scores indicated that small amounts of the total data were outliers. The results showed that the majority of outliers were from jump heights calculated as women landed on the platform. With the genders pooled, anthropometry predicted a significant (p < 0.05) amount of variance from jump heights calculated from both takeoff and hang time. The anthropometry-vertical jump relationship was not significant from heights calculated as subjects landed on the platform, likely due to the female outliers. Yet anthropometric data of men did predict a significant amount of variance from heights calculated when they landed on the platform; univariate correlations of men's data revealed that UAL was the best predictor. It was concluded that the large sample of men's data led to greater data heterogeneity and a higher univariate correlation. Because of our sample size and data heterogeneity, practical applications suggest that coaches may find our results best predict performance for a variety of college-aged athletes and vertical jump enthusiasts.

Anthropometry as a predictor of bench press performance done at different loads.

The purpose of our study was to examine the ability of anthropometric variables (body mass, total arm length, biacromial width) to predict bench press performance at both maximal and submaximal loads. Our methods required 36 men to visit our laboratory and submit to anthropometric measurements, followed by lifting as much weight as possible in good form one time (1 repetition maximum, 1RM) in the exercise. They made 3 more visits in which they performed 4 sets of bench presses to volitional failure at 1 of 3 (40, 55, or 75% 1RM) submaximal loads. An accelerometer (Myotest Inc., Royal Oak MI) measured peak force, velocity, and power after each submaximal load set. With stepwise multivariate regression, our 3 anthropometric variables attempted to explain significant amounts of variance for 13 bench press performance indices. For criterion measures that reached significance, separate Pearson product moment correlation coefficients further assessed if the strength of association each anthropometric variable had with the criterion was also significant. Our analyses showed that anthropometry explained significant amounts (p < 0.05) of variance for 8 criterion measures. It was concluded that body mass had strong univariate correlations with 1RM and force-related measures, total arm length was moderately associated with 1RM and criterion variables at the lightest load, whereas biacromial width had an inverse relationship with the peak number of repetitions performed per set at the 2 lighter loads. Practical applications suggest results may help coaches and practitioners identify anthropometric features that may best predict various measures of bench press prowess in athletes.

Prediction of resultant testosterone concentrations from flywheel-based resistive exercise.

INTRODUCTION: Numerous variables impact resultant testosterone concentrations (TC) that foretell the efficacy of workouts. Identifying variables may aid the development of in-flight exercise prescription. METHODS: To identify variables that predict the variance in TC from flywheel ergometer exercise, 17 subjects did 3 workouts in a randomized order. Comprised of 10-repetition leg press sets, workouts entailed either: 1) 3 sets of both concentric and eccentric muscle actions (CE3), and concentric-only actions done for 2) three (CO3), or 3) six (CO6) sets. Venous plasma TC were collected before and at 1 and 30 min postexercise. The last two collection points served as criterion measures. Body mass, delta blood lactate levels, peak angular velocity, average power, and total work from workouts were used to predict the variance in TC. RESULTS: Predictor variables accounted for significant levels of variance at both 1 and 30 min post-exercise for both the CE3 and the concentric-only (CO3 and CO6 bouts combined) workouts using multivariate regression. Inclusion of eccentric variables (only collected from the CE3 bout; r2 = 0.90) predicted nearly twice the variance than the concentric-only (r2 = 0.54) workouts. CONCLUSIONS: Body mass and average power indices were the best predictors of the variance in post-workout TC. Since a flywheel-based device is used to abate in-flight muscle atrophy and strength losses, exercise prescriptions may wish to monitor these indices as they impacted post-workout TC to the greatest extent. Future research should assess why eccentric variables increased the amount of explained variance from flywheel ergometer workouts.

Blood lactate and hormonal responses to prototype flywheel ergometer workouts.

The purpose of the study was to compare blood lactate and hormonal responses with flywheel ergometer (FERG) leg presses for preliminary assessment of workouts best suited for future in-flight resistance exercise. Comprised of 10 repetition sets, the workouts entailed 3 sets of concentric and eccentric (CE3) actions, or concentric-only actions done for 3 (CO3) or 6 (CO6) sets. Methods employed included assessment of blood lactate concentrations ([BLa-]) before and 5 minutes postexercise. Venous blood was also collected before and at 1 and 30 minutes postexercise to assess growth hormone, testosterone, cortisol concentrations ([GH], [T], [C]) and [T/C] ratios. [BLa-] were compared with 2 (time) x 3 (workout) analysis of variance. Hormones were assessed with 2 (gender) x 3 (time) x 3 (workout) analysis of covariances. Results showed [BLa-] had a time effect. Growth hormone concentration showed gender x workout, gender x time, and workout x time interactions, whereas [T] had a 3-way interaction. [C] had gender, time, and workout effects. [T/C] yielded a gender x time interaction. It was concluded that, because CO6 and CE3 yielded similar anabolic hormonal data but the latter had a lower [C] 30 minutes postexercise, CE3 served as the best workout. Although the FERG was originally designed for microgravity, the effort put forth by current subjects was like that for workouts aimed at greater athletic performance and conditioning. Practical applications suggest that eccentric actions should be used for FERG workouts geared toward muscle mass and strength improvement.

Data reproducibility from an inertial kinetic exercise machine.

An inertial kinetic exercise (IKE, Oconomowoc, WI, USA) machine was created that permits high-velocity workouts suited for injury rehabilitation and speed development in athletes. In addition, its design does not entail the movement of resistance against Earth's gravitational pull. Thus, the design and operation associated with the IKE may be incorporated into novel environments such as space flight. Yet before it can be used for such reasons, IKE data reproducibility must first be ascertained, which serves as the present study's purpose. Methods to assess data reproducibility required subjects (n = 42) to perform 2 IKE elbow flexor trials, each comprising two 60-second sets separated by a 90-second rest. Preceded by a familiarization session on the IKE, subjects were instructed to perform high-speed elbow flexor trial repetitions in good form. Instrumentation entailed an accelerometer and a computer interfaced with software. Maximum and average forces (MF, AF), as well as work (W), were examined for reproducibility with several test-retest measures. Results showed high reproducibility, yet intertrial variability was greater due in part to the length of time between exercise sessions. It was concluded that MF reproducibility was inherently less partly due to the nature of the variable, which entailed a single instantaneous expression over each 60-second set. In contrast, AF and W denoted a cumulative, and thus better overall, representation of total exercise performance. Based on our high reproducibility values, present IKE instrumentation methods appear to be appropriate. Practical applications suggest that coaches and therapists may want to employ an IKE as instrumented in the present study to derive reproducible performance data on people who may use the device under their supervision.

Data reliability from an instrumented vertical jump platform.

A Vertec jump measurement and training system measures vertical jump heights but not additional variables that would reveal how the performance was achieved. Technology advances to equipment now include additional variables that elucidate how jump performance is achieved. However, acceptance of new jump-related equipment is predicated on the reliability of the vertical heights it measures in relation to those assessed by the Vertec. Thus, our study compared vertical jump height reliability data from a newly created instrumented platform to those concurrently derived from the Vertec. Methods required subjects (n = 105) to perform 2 jump trials separated by at least 2 days of rest. Trials began with a warm-up, followed by 3 to 5 maximal-effort jumps. The Vertec was placed directly over the platform so, as jumps occurred, subjects took off and landed on the instrumented device. At the jump apex subjects contacted the highest Vertec slapstick possible to assess maximum height attained. Four height measurements were derived from each jump: 3 platform-based calculations (from subject's take-off, hang time, and landing) and 1 Vertec. The platform-based calculations were compared to Vertec data to assess the reliability of the instrumented device. Intraclass correlation coefficient (0.90), coefficient of variation (17.3%), standard error of measurement (0.9 cm), and smallest real difference (3.7 cm) results showed heights calculated from platform take-offs were most reliable to Vertec values. It was concluded take-off from the platform yielded jump heights that are a viable alternative to those derived from the Vertec. Practical applications suggest coaches may use the platform to derive reliable vertical jump data in addition to other variables to better understand the performance of their athletes.

Impact of acceleration on blood lactate values derived from high-speed resistance exercise.

Acceleration, or an increase in the rate of movement, is integral to success in many sports. Improvements in acceleration often entail workouts done at intensities that elicit higher blood lactate concentrations (BLa). The purpose of the study is to assess the impact of acceleration on BLa. Methods required subjects (n = 45) to perform 4 workouts that each involved two 1-minute sets of hip- and knee-extension repetitions on an inertial exercise trainer (Impulse Training Systems, Newnan, Georgia). Subjects performed 2 workouts comprised solely of phasic or tonic repetitions; their sequence was randomized to prevent an order effect. Before and 5 minutes after exercise, subjects' BLa were assessed with a calibrated analyzer (Sports Resource Group, Hawthorne, New York). Post and delta (post-pre) BLa both served as criterion measures for multivariate analysis. Average and peak acceleration values, derived from both phasic and tonic workouts, served as predictor variables. Results showed statistical significance (p < 0.05; R = 0.2534) and yielded the following prediction equation from phasic workouts: delta BLa = 1.40 + 1.116 (average acceleration set 1)--0.011 (peak acceleration set 1)--0.634 (average acceleration set 2) + 0.005 (peak acceleration set 2). Conclusions suggest delta BLa variance, which represents the increase of the metabolite incurred from workouts, is most easily explained by average acceleration values, which describes the mean increase in the rate of movement from phasic workouts. To improve an athlete's tolerance for acceleration-induced BLa increases, workouts should be tailored with respect to the muscles involved and the duration of exercise bouts of their chosen sport.

Growth hormone levels after flywheel ergometer exercise: correlation with independent variables.

INTRODUCTION: In-flight muscle mass and strength losses are likely exacerbated by low growth hormone (GH) concentrations. Factors associated with exercise may foretell resultant GH levels and thereby help blunt future mass and strength losses. METHODS: To assess the ability of variables to predict GH variance from resistive exercise done on a flywheel ergometer (FE) designed for in-flight exercise, subjects (N=17) performed three types of workouts on the device. With a randomized design, subjects performed the workouts with the intent to determine if changes in post-exercise GH concentrations are impacted by contractile mode and workload. Body mass, blood lactate (BLa-) concentrations, and peak angular velocity (PAV), average power (AP), and total work (TW) from workouts attempted to predict GH variance. Pre-exercise blood draws, and at 1 and 30 min after workouts, were used to determine GH concentrations. BLa- levels were measured before workouts and at 5 min post-exercise. Delta (8, post-pre) and 30-min post-workout GH levels served as criterion variables. RESULTS: Multivariate regression with an alpha < or = 0.05 yielded the following significant prediction equation: deltaGH = 13.64 - 0.014 (body mass) - 0.607 (post-exercise BLa-) + 0.659 (deltaBLa-) - 0.624(PAV) + 0.653(TW) + 0.147(AP). DISCUSSION: Univariate correlations show body mass, deltaBLa-, and TW were the best predictors of deltaGH variance. Future research should also attempt to identify additional variables that account for the unexplained GH variance from FE workouts.

beta(2)-Adrenergic agonist administration and strength training.

beta(2)-Adrenergic agonists (beta(2)AA) produce myriad effects throughout the human body. Prescribed concurrently with theophylline for the bronchodilatory effects they offer in the treatment of asthma and chronic obstructive pulmonary disease, beta(2)AA actions include many beneficial and adverse changes when administered to animals at supraphysiological doses. Beneficial changes include improved musculoskeletal health and function, which can be maintained because adverse changes are reduced if oral beta(2)AA are given at therapeutic dosages in humans with concurrent resistive exercise administration. Combined oral beta(2)AA-resistive exercise treatments have been shown to produce gains in musculoskeletal health and function in numerous healthy and disuse atrophy human models. The mechanism(s) by which beta(2)AA exert their effects are a function of multiple factors, not the least of which includes the type of model receiving the drug treatment. Combined oral beta(2)AA-resistive exercise treatments in humans showed that adverse effects were greatly reduced when prudent and safer drug administration practices were employed (eg, screening subjects for tolerance before drug treatment). Results from human research trials suggest that administration of the combined treatment improves musculoskeletal function and performance with minimal health risk if proper precautions are followed. A related issue is administration of the combined treatment as an ergogenic aid to athletic performance. Given the results presented in this article, physicians should be wary of potential drug abuse and administer beta(2)AA only under appropriate circumstances when such a treatment is warranted.

Performance evaluation of a high-speed inertial exercise trainer.

A high-speed, low-resistance inertial exercise trainer (IET, Impulse Training Systems, Newnan, Ga) is increasingly employed in rehabilitative and athletic performance settings. Repetitions on an IET are done through a large range of motion because multijoint movements occur over more than one plane of motion, with no limitation on velocities or accelerations attained. The current study purpose is to assess data reproducibility from an instrumented IET through multiple test-retest measures. Data collection methods required the IET left and right halves to be fitted with a TLL-2K force transducer (Transducer Techniques, Temecula, Calif) on one of its pulleys, and an infrared position sensor (Model CX3-AP-1A, automationdirect.com) located midway on the underside of each track. Signals passed through DI-158U signal conditioners (DATAQ Instruments, Akron, Ohio) and were measured with a four-channel analog data acquisition card at 4000 Hz. To assess data reproducibility, college-age subjects (n = 45) performed four IET workouts that were spaced 1 week apart. Workouts entailed two 60-second sets of repetitive knee- and hip-extensor muscle actions as subjects were instructed to exert maximal voluntary effort. Results from multiple test-retest measures show that the IET elicited reproducible intra- and interworkout data despite the unique challenge of multiplanar and multijoint exercise done over a large range of motion. We conclude that future studies in which IET performance measurement is required may choose to instrument the device with current methodology. Current practical applications include making IET data easier to comprehend for the coaches, athletes, and health care providers who use the device.

Temporal strength changes from resistance exercise and albuterol on unloaded muscle.

To assess unloaded knee extensor temporal strength changes, healthy subjects without asthma performed 40 continuous days of unilateral limb suspension, whereby their left leg refrained from normal weight-bearing and ambulatory activity. During the 40-day period, subjects performed resistance exercise (REX) with their unloaded leg on an inertial resistance ergometer and, as part of a double-blind design, consumed the maximal oral therapeutic dosage of albuterol (i.e., 16 mg.d) or a placebo (i.e., lactose) with no crossover. Workout data were partitioned into 4 10-day periods that ran consecutively. Dependent strength variables included concentric total work, eccentric total work, concentric average power (CAP), and eccentric average power (EAP). Dependent variables were analyzed with 5 (time) x 2 (group) x 2 (gender) mixed factorial analyses of variance and the Tukey honestly significant difference test. Concentric total work, CAP, and EAP each demonstrated a time-group-gender (p < 0.05) interaction. Female REX-placebo subjects had the greatest percentage of unloaded knee extensor strength loss. However, female REX-albuterol subjects fared best throughout the 40-day period and incurred significant unloaded knee extensor strength gains. Differences in strength changes between male and female REX-albuterol subjects was likely due to the higher relative dosage administered to the latter, as body mass showed a gender (i.e., men > women) effect. Future research may elucidate the ideal dose-response relationship for REX-albuterol treatment for use aboard manned space flights and in other disuse models. Coaches and practitioners should carefully examine their sport-governing bodies' rules on albuterol administration and give the drug only if an athlete's health warrants such treatment.

The combined acute effects of massage, rest periods, and body part elevation on resistance exercise performance.

Although massage administered between workouts has been suggested to improve recovery and subsequent performance, its application between bouts of repetitive supramaximal anaerobic efforts within a given workout has received little attention. The purpose of the study compared different forms of very short rest periods administered between resistance exercise sets of individual workouts on subsequent performance. With a within-subjects design methodology, subjects (n = 30) performed three workouts that were identical in terms of the exercises (45 degrees leg press, prone leg curl, seated shoulder press, standing barbell curl), number of sets, and the resistance employed. For each workout, subjects received one of the following treatments between sets: 1 minute of rest as they stood upright, 30 seconds of rest as they stood upright, or 30 seconds of concurrent massage and body part elevation (MBPE), which entailed petrassage of the exercised limbs in a raised and supported position in an attempt to abate fatigue and enhance recovery from the previous set. Subjects were instructed to perform as many repetitions as possible for each set. For each exercise, two dependent variables were calculated: a total work/elapsed time ratio and the cumulative number of repetitions performed. For each exercise, one-way repeated-measures analysis of variance and Tukey's post hoc test revealed the following total work/elapsed time results: 1 minute rest <30 seconds' rest, 30 seconds' MBPE. For each exercise, cumulative repetition results were as follows: 1 minute rest >30 seconds' rest, 30 seconds' MBPE. Results imply that rest period duration exerts more influence on resistance exercise performance than MBPE. Those who seek improved resistance exercise performance should pay particular attention to rest period durations.